Beli Bagal Ganda bekas (1.920)

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force: 50 t Gjdpfx Adovuk Ngotstt Column spacing: 1,750 mm Stroke: 500 mm Distance table/ram, max. stroke up, adjustment up: 800 mm Table surface: 1,700 x 750 mm Table height above floor: 800 mm Lateral column opening: 650 x 750 mm Ram surface: 1,700 x 750 mm Drive power: 11.0 kW Weight: 11.0 t Space requirements (LxWxH): 2.1 x 1.15 x 3.4 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and position dependent control No foundation pit required Can be offered either as-is (not commissioned) or alternatively with new Siemens S7-1500 F control.

Kondisi: bekas, Dijual Mixer Disolver Vakum 3C Bekas, double jacket, kapasitas 120 liter Material: Stainless steel Motor: 3 kW – 4 HP – 1420 rpm – 3x 220/380 V Pemanas listrik: 3x 3 kW Kapasitas efektif: 120 liter Agitator: disolver Ø 120 mm Tangki berbentuk kerucut Ø 600 x 200 mm – Tinggi: 750 mm Dilengkapi dengan: - 1 vacuum pump 0,37 kW - 1 pompa sirkulasi jacket ganda 0,26 kW Gtjdpfjx Ryvtex Adtot - 1 pompa sirkulasi untuk mechanical seal 0,5 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Travel, X-axis: 10,000 mm Travel, Y-axis: 1,500 mm Travel, Z-axis: 1,000 mm Passage height: 1,300 mm Passage width: 1,500 mm Control: Siemens Sinumerik 840 D Speed, 2-stage: 6,000 rpm Operating hours: 54,821 h Tool holder: SK 50 Drilling capacity: 120 mm Tapping capacity: M 55 Tool magazine: chain magazine for 30 tools Rapid traverse X-axis: 36,000 mm/min Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Total power requirement: 36 kW Space requirement approx. 12 x 11 m Gantry-type portal milling machine with traveling portal bridge and stationary clamping table. Features: Gtsdpex S Rx Iefx Adtot • Clamping table equipped with crosswise clamping beams, spaced 750 mm apart. Standard plate fields are not included; these must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit. • Angular milling and drilling head, n = 4,000 rpm, SK50. • High accuracy and stability due to Hirth coupling. • Automatic tool change into the angular head. • Measuring probe RWP20.50-M. • Pendulum operation. • Safety fence with light curtains, make: Sick. • Clamping table with crosswise clamping beams, every 750 mm. • Tool chain magazine on the portal column with 30 positions. • Machine cooling system. • Water-air heat exchanger integrated in the control cabinet. • Unisign remote diagnostics for Siemens Sinumerik 840 D. • Makrolon curtains on both sides of the portal bridge, motor-adjustable in height. • Partition with viewing window. • Chip conveyor with hinged belt design. • Setup and alignment elements. • Documentation. Accessories: 1 pc. angular milling and drilling head SK50 (spare) 1 pc. Hexagon measuring probe RWP 20.50-M (spare) 1 pc. clamping field with T-slots 2,500 x 1,200 mm, can be installed on the machine instead of the hydraulic fixture. Various spare parts

Kondisi: bekas, nomor mesin/kendaraan: 007960, Gergaji bundar format: Mesin 1 & 2 Kecepatan makan maksimum: 36 m/menit Jarak antara jepitan: 450 mm Gjdewl Dnispfx Adtjtt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.500 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 650 mm, panjang meja: 6.300 mm, lebar meja: 2.500 mm, kecepatan spindel (min.): 30 rpm, kecepatan spindel (maks.): 4.000 rpm, gerak cepat sumbu X: 20.000 m/menit, pergeseran cepat sumbu Y: 3.500 m/menit, pergerakan cepat sumbu Z: 10.000 m/menit, jarak antara penyangga: 3.050 mm, beban meja: 30.000 kg, berat keseluruhan: 59.000 kg, hidung spindel: NT No.50, panjang langkah makan poros W: 1.300 mm, Okuma MCR-A5C pusat permesinan gantry (2013) dengan spindle BT50, perjalanan X 6.500 mm dan kapasitas muatan meja 30 ton. Mesin memiliki sekitar 5.700 jam pemotongan dan 6.900 jam spindle, cocok untuk pemesinan berat dan presisi pada benda kerja berukuran besar. Gjdpfxjx Tzyxo Adtett

Kondisi: baru, Tahun pembuatan: 2026, Table Version - High performance - Belt grinding unit height adjustable 0-90° - Maximum usable surface for flat grinding - Belt adjustment with fine-tuning Combined belt grinding / grinding machine - Longitudinal fence for material guidance - Perfectly balanced and low vibration - Dual-sided dust extraction connection Ø 50 mm - Motor protection switch with undervoltage release - Fixed stop - 1 standard abrasive belt (brown), grit 80 - 1 grinding wheel 250 x 40 x 51 mm, grit 80 - Spark protection - Connection cable with CEE plug Surcharge for special equipment/options: - Machine stand, emergency stop button, brake, and extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water dousing tank / €360 DELIVERY: FREE SHIPPING (within Germany) Gtjdpfxehhiaao Adtot NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Kondisi: bekas, Tahun pembuatan: 1989, Pressure: 100 t Clearance between uprights: 1,060 mm Stroke: 700 mm Distance table/ram, max stroke up, adjustment up: 1,250 mm Table area: 1,000 x 700 mm Drawing cushion pressure in table: 40 t Drawing cushion stroke in table: 200 mm Gsdpfxsvuk Nao Adtstt Drawing cushion area: Ø 250 mm Table height above floor: 950 mm Lateral upright passage: 580 x 750 mm Ram area: 1,000 x 700 mm Oil capacity: 700 l Drive power: 47.0 kW Weight: 13.0 t Space required (WxDxH): 2.2 x 1.8 x 5.0 m Approved for manual loading/unloading according to German accident prevention regulations (UVV). Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motorized adjustable), ram locking device (SITEMA). Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1990, Pressure 32 t Clearance between uprights 680 / 550 mm Stroke 8 - 50 mm Strokes per minute 85 - 500 spm Installation height (stroke + slide adjustment at top) 300 mm Gjdpevuuf Ssfx Adtjtt Lateral opening between uprights 250 mm Table surface 620 x 450 mm Through-hole in table 450 x 110 mm Table height above floor 915 mm Ram surface 560 x 350 mm Drive power 7.5 kW Machine weight approx. 5.60 t Space requirements approx. 3.6 x 1.65 x 2.8 m Ram adjustment 50 mm Approved for automatic operation according to German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, mechanical gripper feed (ZR 18 D) Can be offered as-is, either in working or non-working condition

Kondisi: bekas, Tahun pembuatan: 1980, 100 t pressure Stroke: 20 – 200 mm Strokes per minute: 20 – 60 Upright gap: 1230 mm Shut height (stroke + ram adjustment, top position): 650 mm Lateral gap between uprights: 540 mm Table size: 1050 x 750 mm Table height above floor: 760 mm Ram area: 1000 x 750 mm Ram adjustment: 100 mm Gedpovuk H Ejfx Adtjtt Drive power: 18.0 kW Weight: 20.5 t Space requirements approx. 2.8 x 1.9 x 4.3 m (LxWxH) Only approved for safe tool use or fixed guarding in accordance with German accident prevention regulations (UVV). With infinitely variable drive (PIV), pneumatic clutch/brake combination (Desch), hydraulic ram overload protection, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized oil circulation lubrication, and two-hand and foot operation. Condition: As is, lying and standing, WITHOUT commissioning.

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 250 t Distance between uprights: 1650 / 1400 mm Fixed stroke: 150 mm Stroke rate: 30 - 75 strokes/min Shut height (stroke + ram adjustment at top): 665 mm Side upright opening: 550 mm Table surface: 1600 x 900 mm Passage opening in table: 1000 x 300 mm Table height above floor: 980 mm Ram surface: 1400 x 900 mm Drive power: 42.0 kW Machine weight: approx. 33.00 t Space requirement: approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic ram weight compensation, FIXED stroke, motorized ram adjustment, motorized central lubrication Electronic roller feeder (Normatic, AESL 500-2.8) with motor (Indramat), motorized lateral band guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system. Gtodpfovuucwjx Adtet

Kondisi: bekas, Tahun pembuatan: 2010, de-to-hu Godpfsvuubmsx Adtott

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Gjdpovuk Hrefx Adtott Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, where is, WITHOUT being put into operation

Kondisi: bekas, Tahun pembuatan: 1982, de-hu-it-lt-2024-06-27-01 Gtodpfx Adjvuk Hletot

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force 250 t Gtodpfovut Tnjx Adtst Column gap 2000 mm Stroke 600 mm Distance table/ram, stroke up 1000 mm Table surface 1700 x 1300 mm Table height above floor level 800 mm Die cushion force in table 100 t Die cushion stroke in table 180 mm Die cushion surface in table 1650 x 700 mm Side frame opening 1000 mm Ram surface 1700 x 1400 mm Weight 31.1 t Space requirement (WxDxH) 3.3 x 1.9 x 4.85 m Height above floor 4.55 m Approved for manual loading according to German accident prevention regulations (UVV) with electrohydraulic drive, hydraulic die cushion in table, hydraulic shock absorption no pit required Can be offered without commissioning, with commissioning in as-is condition, or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1990, de-HU-01 Gsdevut Tbepfx Adtjtt

Kondisi: bekas, Tahun pembuatan: 1983, druk160t10 Gtsdpfx Adovuk E Ustet

Kondisi: bekas, Tahun pembuatan: 1996, Pressure: 63 t Column gap: 965 mm Stroke: 4 - 60 mm Stroke rate: 30 - 800 strokes/min Shut height (stroke + ram adjustment at top): 380 mm Gtsdpevut Rgefx Adtet Lateral column clearance: 355 mm Table area: 960 x 640 mm Through opening in table: 850 x 140 mm Table height above floor: 1,150 mm Ram area: 960 x 460 mm Drive power: 32.5 kW Machine weight approx. 13.00 t Space requirement approx. 3.3 x 1.7 x 2.9 m Ram adjustment: 80 mm Approved for automatic operation according to CE standard with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motorized ram adjustment, mechanical feed gripper type GF 160 Can be offered in its present condition, either without or with commissioning

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 63 t Stroke: 10 - 80 mm Strokes per minute: 75 - 400 Upright spacing: 1080 / 920 mm Shut height (stroke + ram adjustment at top): 450 mm Lateral upright passage: 300 mm Table area: 1000 x 550 mm Die opening in table: 700 x 160 mm Gtsdjvut Ixspfx Adtet Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Required space approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive control (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feed Kaiser KWV 250.

Kondisi: bekas, Tahun pembuatan: 2003, dr-press-specs-1994 Gjdpsvut H Uefx Adtett

Kondisi: bekas, Tahun pembuatan: 2004, en_VErnGNwKJDgr1wSjQd5yMZ Gtsdov Svaropfx Adtst

Kondisi: bekas, Tahun pembuatan: 2003, Pressing force 400 t Frame gap 1060 mm Stroke 450 mm Strokes per minute 15 - 30 Godpfxovzxpuj Adtjtt Distance table/ram, max stroke up, adjustment up: 1160 mm Table area 1000 x 700 mm Ejector force in table 2 x 16 t Ejector stroke in table 125 mm Cushion force in table 120 t Cushion stroke in table 2 mm Ejector force in ram 2 x 4 t Ejector stroke in ram 100 mm Ram area 1000 x 700 mm Lateral frame passage 630 mm Drive power 55.0 kW Weight 50.0 t Year of manufacture 1986 - Overhauled 2003 Multi-stage press with automatic parts feed, transfer system, cushion in table (2nd stage) as is, stored disassembled, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-it-lt-01 Gedpjvuuiksfx Adtstt

Kondisi: bekas, Tahun pembuatan: 2005, 1 Gtedpfx Adevuuh Tjtot

Kondisi: bekas, Tahun pembuatan: 1979, Pressing force: 1000 t Column width: 3030 mm Stroke: 350 mm Distance between table and slide, stroke at top, upper adjustment: 1400 mm Table size: 3000 x 2000 mm Table height above floor level: 430 mm Side column opening: 1450 x 1400 mm Slide area: 3000 x 2000 mm Downward speed: from 300 mm/s Upward speed: 340 mm/s Working speed: 18 - 44 mm/s Return force: 120 t Oil capacity: 4400 l Width with platform: 4950 mm Drive power: 2 x 90.0 + 10.0 kW Gtedpfevuk I Aex Adtot Weight: 87.0 t Space requirements (W x D x H): 4.35 x 3.65 x 7.55 m Height above floor: 6.05 m Height below floor: 1.5 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and stroke-dependent control, adjustable speed, slide locking, two-hand operation Partially disassembled and stored – as is, without commissioning

Kondisi: bekas, Tahun pembuatan: 1998, Tekanan 800 t Jarak kolom 3550 mm Langkah 1100 mm Jarak meja/pelatuk, langkah besar atas, setel atas 1900 mm Luas meja 3500 x 1800 mm Tekanan bantal tarik di meja 350 t Langkah bantal tarik di meja 280 mm Tekanan bantal tarik di pelatuk 80 t Langkah bantal tarik di pelatuk 160 mm Luas pelatuk 3500 x 1800 mm Gjdpfxovuuhgs Adtjtt Bukaan samping kolom 1900 mm Berat 100,0 t Kebutuhan ruang (P x L) 5,3 x 4,3 m Tinggi di atas lantai 7,3 m Tinggi di bawah lantai 5,0 - 6,0 m Tahun pembuatan 1970 - Overhaul 1998 Dengan penggerak oli hidraulik, bantal tarik hidraulik yang dikendalikan di meja dan pelatuk, peredam benturan geser hidraulik, meja geser (tanpa rel untuk meja jalan) Tinggi di bawah lantai sekitar 5 - 6 m Dibongkar dan disimpan - Video tersedia dari pemilik sebelum pembongkaran