Beli Bank Kedua bekas (2.418)

Tahun pembuatan: 2009, Kondisi: bekas, BANG KRAN HEBEAUSLEGER TRAGFÄHIGKEIT 3,2 t AUSLEGERLÄNGE 5.000 mm HUBWEGLÄNGE DES AUSLEGERS 4.000 mm Gedjwar Dbjpfx Ag Rskf HERGESTELLT IN DEUTSCHLAND

Kondisi: bekas, Transnorm belt curve conveyor, left-hand, GKF 90°-780-600 IR600 with dual drive-over RA2019 The Transnorm belt curve is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. Supports are not included in the scope of delivery, but are optionally available upon request. Belt curves are commonly used in intralogistics for in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, extended operating times are not an issue. Conical drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 780 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Gjdpfsk Abufex Ag Rokf Conveying angle: 90° Support legs: optionally available Conveying speed (v m/s): dependent on downstream conveyor, please contact us Drive: no motor included, is driven by the downstream conveyor Scope of delivery: without support legs Optionally available: - Support legs - Side guides All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Kondisi: bekas, de Gkodpsxzhw Defx Ag Ref

Tahun pembuatan: 2024, jam operasional: 35 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual bank beban (load bank) ACT-400 bekas, sepenuhnya berfungsi, dari AGG Power Technology, beroperasi sejak Maret 2025. Spesifikasi Teknis: Tegangan: 3 fasa, empat kawat, AC400V, 50/60Hz Daya maksimum: 510 kW Beban resistif dengan 11 langkah, dapat dikombinasikan bebas: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Faktor daya: 1 Deviasi dari setpoint: ±5% Komunikasi: RS232 / RS485, kompatibel dengan Modbus Pendinginan: Forced air Lingkungan operasi: -20℃ hingga +55℃ Siklus kerja: Kontinu Nomor seri: 2407034 Sertifikat: CE / ISO 8528-06 / GB/T 2820.5-2009 Catatan: Godpfx Agjxvmxpo Rokf Terpasang di luar ruangan, total jam operasi sekitar 15.815 kWh Tersedia untuk diambil/dikirim mulai Desember 2025 Palletisasi memungkinkan, pengangkutan diatur oleh pembeli Harga bisa dinegosiasikan Lokasi: Republik Ceko

Kondisi: bekas, Tahun pembuatan: 2004, diameter pembubutan: 660 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 1.045 mm, tinggi total: 2.600 mm, panjang total: 3.820 mm, lebar total: 2.060 mm, berat keseluruhan: 10.400 kg, Mazak Integrex 200 III S + GL 150 F CNC Turning and Milling Center with Second Spindle CNC Control: Mazatrol PC Fusion CNC 640 MT PRO Swing diameter: 550/660 mm Turning length: 1,016 mm Gkjdpfx Ajxd Ay Eeg Ref Spindle bore diameter: 65 mm Spindle speed: 35–5,000 rpm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1,045 mm B-axis travel: 225° C-axis indexing: 360° Spindle nose: A2-6 Tool taper: Capto C6 Number of tools in magazine: 40 If you have any questions about the machine or wish to schedule a viewing appointment, please feel free to contact us by phone or email.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Tenoning Machine - Saw unit * Saw blade diameter: 500 mm * Maximum cutting width: 200 mm Gkedpfexd A E Usx Ag Rjf * Motor: 2.2 kW - Upper horizontal milling head * Tool diameter: 200 mm * Maximum tenon length: 150 mm * Motor: 2.2 kW - Lower horizontal milling head * Tool diameter: 200 mm * Maximum tenon length: 150 mm * Motor: 2.2 kW - Spindle * Spindle diameter: 50 mm * Maximum tool diameter: 350 mm * Spindle length: 180 mm * Motor: 5.5 kW - Tilting table +/- 60° - Pneumatic clamp - Fence max. 3000 mm - Reversible counter-profile fence - Tilting fence +/- 45°

Kondisi: baru, Tahun pembuatan: 2025, Authorized Dealer: PROD-MASZ Company. ABKANTBANK-Technik Halver, your competent partner for folding machines (bending brakes). Folding Machine ZGR2000/0.8 on wheels by Prod-Masz, available on-site for testing and direct pickup. On-site professional instruction provided. Technical data: - Working width: 2140 mm - Sheet thickness steel: up to 0.8 mm - Non-ferrous metals: 30% greater sheet thickness Gedert Hu Iopfx Ag Rekf - Bending angle: up to 145° - Bending beam: 15 mm - Clearance: 80 mm - Degree scale - Stop for preset bending angles - Sheet metal tray - Front depth stop - Weight: approx. 175 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request. Accessories: Manual rotary shear (up to 0.8 mm) €350 Delivery within Germany: €180 All prices are plus 19% VAT. Self-collection available. CE Certificate Warranty: 12 months.

Kondisi: bekas, Tahun pembuatan: 2008, Transnorm Roller Curve Combination, right and left, 45°-1200-900-800 IR800 1551 mm RA2232 Manufacturer: Transnorm Direction of Travel: Combination curve, right- and left-running Roller Width (RB): 800 mm, tapered, plastic coating Nominal/Outer Width (NB): 900 mm Inside Radius (IR): 800 mm Center Section Length: 1200 mm Offset: 1551 mm Frame Height: 80 mm Overall Height including Motor: 450 mm Drive/Transmission: Chain Electrical Data: 300-500 V, 0.37 kW Gear Motor: SEW, R17DT71D4/TH Conveying Speed: please contact us for details Scope of Delivery: without supports Optionally Available: - Supports - Side guides, single-sided or double-sided - Frequency inverter for variable speed control - Length adjustment (longer/shorter) - Additional roller conveyors/roller curves with chain drive Gksdpfxorixi Ts Ag Rjf All prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Please contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Daftar ini untuk Labcold Blood Bank RDBB11601 Kulkas Laboratorium. Unit dalam kondisi kerja penuh dan siap untuk segera dikirim. Gkedpfjxx Awtjx Ag Rjf

Kondisi: baru, Tahun pembuatan: 2025, EN20240629A01 Gjdpfx Agevbwqds Rekf

Kondisi: baru, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable Scope of delivery includes: 01x Workbench frame, new Gkedpfov Tlilox Ag Rsf Frame color: grey Workbench legs: height-adjustable 01x Worktop, new Material: multiplex plywood Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Estimated delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, additional costs will apply, which can be provided upon request and vary depending on place of delivery and the scope of delivery.

Kondisi: baru, Number of drawers: 4 pcs. Number of compartments: 2 pcs. Worktop thickness: 45 mm Table length: 2000 mm Gsdpfx Asxabbtsg Rekf Dimensions (L x W x H): 2000 x 700 x 900 mm Weight: approx. 152 kg. Features: - Brand new workbench - 45 mm multiplex worktop with edge banding - Left side: 3 drawers - Right side: 1 drawer, 1 door Available in colors: BLUE / GREEN or GREY!

Kondisi: bekas, Tahun pembuatan: 2006, ketebalan lembaran (maks.): 6 mm, Manufacturer: DURMA Model: VS 3006 Gkjdpfxswrx Tae Ag Ref Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Wilbanks (CoorsTec) ceramic angle standard, 600x460x80mm, squareness < 4µm. Lightly used, excellent condition. Inspection certificate available on request (surcharge applies). Gsdpfsq Tdlzjx Ag Rjkf

Kondisi: baru, Tahun pembuatan: 2025, de-en-001 Gkedpfxectui Re Ag Rof

Kondisi: baru, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Workbench frame, new Gkedpsh Euqlefx Ag Rsf Material color: anthracite Overall width: approx. 1,400 mm Overall height: approx. 900 mm Overall depth: approx. 600 mm 01x Worktop, new Overall width: approx. 1,400 mm Overall depth: approx. 600 mm Notes: - The workbenches are picked and delivered unassembled General information about the item: This item is only offered for collection. Any transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our services at a glance: (Prices on request) Assembly and Installation Please observe our general assembly conditions. Racking Inspection Racking inspection according to DIN EN 15635, carried out in accordance to BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (without unloading)

Kondisi: bekas, Base dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical specifications for the workbench: Manufacturer: Polypal Model: Stockpal Included in the scope of delivery: 02x Workbench uprights, used Material color: anthracite Upright height: 900 mm Gkodetgkwmepfx Ag Rof Upright depth: 900 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted lattice structure) 04x Workbench beams, used Material color: orange Box section: 120 x 50 mm Clear span: 2,300 mm 08x Safety locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 01x Chipboard panel, grade II, used Panel thickness: 38 mm Panel width: 2,500 mm Panel depth: 900 mm Surface: optionally coated (possibly two-piece) 01x Chipboard panel, grade II, used Panel thickness: 38 mm Panel width: 2,280 mm Panel depth: 900 mm Surface: optionally coated (possibly two-piece) 06x Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used For securing or inserting chipboard panels Surface: galvanized Note: - Images are for material illustration purposes only. - Material color may vary. - Workbench frames are supplied unassembled; - Workbench uprights are pre-assembled; - Production time is generally approx. 3-5 working days. You can also purchase the workbenches from us in the following alternative depths: Workbench 2,500 x 600 mm / 2 tiers / (221.00€ net) Workbench 2,500 x 700 mm / 2 tiers / (229.00€ net) Workbench 2,500 x 800 mm / 2 tiers / (238.00€ net) Workbench 2,500 x 1,000 mm / 2 tiers / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 tiers / (259.00€ net) Workbench 2,500 x 1,100 mm / 2 tiers / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 tiers / (271.00€ net) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport/shipping is available at additional cost, which can be quoted separately depending on destination and scope of delivery.

Kondisi: baik (bekas), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery: 02x Workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Incl. cross and diagonal braces, base plates Uprights are pre-assembled (bolted lattice construction) 04x Workbench beams, used Gkjdpfjth N Shsx Ag Rsf Colour: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm 08x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting Note: - Images are for illustrative purposes only. - Colours of materials may vary. - Workbench frames are picked/dispatched unassembled; - Bench uprights are pre-assembled; - Standard production time is about 3-5 working days. You may also purchase the workbenches from us in the following alternative depths: Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is available for collection only. If transport or shipping is required, this is subject to additional costs, which can be individually quoted depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Note: This is a used steel locker. Minor signs of wear (e.g. scratches, dents, stains or similar) may be present. Scope of delivery includes: 01x Used steel locker with sloped roof Material colour: grey Door colour: grey Number of doors: 2 pcs. with ventilation grille Door handle: Butterfly latch Total width: approx. 610 mm Total depth: approx. 500 mm Total height: approx. 1,895 mm Weight: approx. 50.0 kg Compartment configuration per door: Door handle: 01x Butterfly latch Compartment dimensions: approx. 285 x 490 x 1,600 mm (WxDxH) Clothes rail: 01x pc. | approx. 280 mm Top shelf: approx. 285 x 307 x 400 mm (WxDxH) Godpjwaa D Ajfx Ag Rokf Can be locked with a padlock (padlock not included) 01x Substructure bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (WxDxH) Shoe rack dimensions: approx. 570 x 285 mm (WxD) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (WxDxH) Currently in stock: approx. 21 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Additional transport or shipping of this item is subject to extra charges, which can be quoted separately depending on the place of delivery or scope of delivery.

Kondisi: bekas, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 Scope of delivery includes: 02x Workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) 04x Workbench beams, used Colour: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm 08x Locking pins, used Version: Sendzimir galvanized For securing the main beams against unintentional lifting Gedpethfddsfx Ag Rjkf 01x Particle board, 2nd grade, used Board thickness: 38 mm Board width: 3,200 mm Board depth: 600 mm Surface: possibly coated (possibly two-part) 01x Particle board, 2nd grade, used Board thickness: 38 mm Board width: 2,980 mm Board depth: 600 mm Surface: possibly coated (possibly two-part) 06x Self-drilling screw, new Version: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used For securing/inserting particle boards Surface: galvanized Note: - Pictures are for material illustration purposes. - The actual colour of the materials may vary. - The workbench frames are supplied unassembled; - The workbench uprights are pre-assembled; - Production time is generally approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following alternative depths: Workbench 3,200 x 700 mm / 2 levels / (€271.00 incl. 19% VAT) Workbench 3,200 x 800 mm / 2 levels / (€282.00 incl. 19% VAT) Workbench 3,200 x 900 mm / 2 levels / (€293.00 incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (€304.00 incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (€309.00 incl. 19% VAT) Workbench 3,200 x 1,100 mm / 2 levels / (€315.00 incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (€325.00 incl. 19% VAT) Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope.

Kondisi: baik (bekas), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery: 02x Workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Incl. cross and diagonal braces, base plates Uprights are pre-assembled (bolted lattice construction) 04x Workbench beams, used Colour: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm Godethi Huspfx Ag Rskf 08x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting Note: - Images are for illustrative purposes only. - Colours of materials may vary. - Workbench frames are picked/dispatched unassembled; - Bench uprights are pre-assembled; - Standard production time is about 3-5 working days. You may also purchase the workbenches from us in the following alternative depths: Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is available for collection only. If transport or shipping is required, this is subject to additional costs, which can be individually quoted depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), EN-001 Godpfx Asth N Slsg Rskf

Kondisi: baik (bekas), Note: The images are for illustrative purposes to clarify the material supplied. - The workbench frames are picked and delivered unassembled. - Standard production time is approximately 3-5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Scope of delivery includes: 04x Square section tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling pattern: 75 x 50 mm Drill hole diameter: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Chipboard, used Chipboard thickness: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: possibly coated (possibly two-piece) 06x Self-drilling screws, new Specification: galvanized Dimensions: 6.3 x 70 mm 16x Screws: M12 16x Nuts: M12 16x Washers: M12 Gjdpfx Aswgicbjg Rokf Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be specifically requested from us depending on the delivery location and scope of supply.

Kondisi: baru, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Workbench frame, new Material colour: anthracite Total width: approx. 1,750 mm Total height: approx. 865 mm Total depth: approx. 600 mm 01x Worktop, new Total width: approx. 1,750 mm Material thickness: approx. 35 mm Total depth: approx. 600 mm Notes: - The workbenches are picked and shipped unassembled General information about the item: This item is offered for collection only. Should transportation or shipping of this item be required, it will incur additional costs. These costs can be provided separately on request, depending on the delivery location and scope. Our range of services at a glance: (Prices upon request) Assembly and installation Gjdpfxjh Euk Uo Ag Rjkf Our general assembly conditions apply Racking inspection Inspection of racking according to DIN EN 15635, carried out as per the requirements of BGR 234 visual inspections for all racking systems Delivery by our own fleet (unloading not included)

Kondisi: baru, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable Scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: height-adjustable 01x Drawer cabinet, new Body material colour: grey Door material colour: blue Lockable: yes Number of drawers: 3 pcs Drawer height: 115 mm 01x Worktop, new Material: multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Estimated delivery time: 10-12 weeks Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Gkedov Tm Icjpfx Ag Rjf This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope of delivery.