Beli Bank Kedua bekas (3.184)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Spesifikasi Produsen: IMV Itodpjyw Uf Ajfx Adhoh Model: DM125 Tahun: 2016 Kondisi: Bekas Nomor stok: 0396 Gaya slitter: 1.250 ton Jumlah titik dorong: 2 Kinematika: Eksentrik dengan perubahan langkah Langkah slitter: 250-400 mm Jumlah stroke/menit: 5-35 Jarak vertikal dari penahan cetakan, CBRA: 1.150 mm Dimensi meja: 4.500 x 2.000 mm Dimensi slitter: 4.500 x 2.000 mm Bukaan rangka samping: 2.600 mm Maks. bukaan rangka depan: 4.900 mm Trolley bergerak: 2 unit Daya motor utama: 290 kW Berat press: 310.000 kg

Kondisi: siap digunakan (bekas), large gripper triple transport Itedpfed A Rvrjx Adhoh 6 mm needle gauge complete on base frame with 220 V clutch motor

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms Iedpfx Aowbp Nwodheth No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a production line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 Cam spacing (mm): 500 FORMATTING UNIT (per side): - Protection milling cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) - 2 x Hogger heads DT 10 (2 x approx. 5.8 kW) - Spray unit for liquid anti-adhesive EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue + premelter) SP30 (High Melt + Edge Control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for coils (No. 6 positions) - End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°–25° - Multifunctional unit (radius milling and contour milling) AR 30 (2 x 0.35 kW) Iedpjywk Elsfx Adhsth - Left: 2 x Universal milling units for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0°–90° - Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x approx. 5 kW) 0°–90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 – spray aggregate (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower – edge trimmer PH 10 OPTION: D.O.M. stacker with carrier column and mobile jib (with vacuum suction cups) for unloading and stacking edge-processed panels.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin hampir baru dari likuidasi perusahaan Itedpjyl R U Isfx Adheh

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Shredder 2 poros RSS seri 600, 2 x 7,5 kW Panjang rotor: 600 mm Pisau: 30 mm Mesin dapat disesuaikan sesuai keinginan Anda, termasuk panel kontrol. Waktu pengiriman berdasarkan kesepakatan. Opsi konveyor masuk dan keluar tersedia. Shredder ini sangat cocok untuk penghancuran harddisk, laptop, ponsel, karet, kayu, kertas, dll. Ingin tahu lebih lanjut? Silakan hubungi kami via telepon atau email. Pengiriman dan instalasi mesin juga bisa kami lakukan berdasarkan kesepakatan. Isdpfx Adjw Ry Alohjth Mohon balas dengan nama, nama perusahaan, dan nomor telepon yang valid untuk respon cepat.

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 609086, Penawaran 26074 Otomatis Gergaji Pita Horizontal dengan Panduan Tiang Ganda Hidrolik Data Teknis: Isdjyn Ikrspfx Adheth - Area pemotongan pada 90° bulat: 260 mm - Area pemotongan pada 90° datar: 260 x 260 mm - Otomatis pengumpan material maks. langkah tunggal: 600 mm - Panjang pemotongan maks. dalam multi-langkah: mm - Dimensi pisau gergaji sekitar: 4100 x 32 x 1,2 mm - Kecepatan pemotongan variabel: 12 - 100 m/menit - Tekanan pemotongan dapat diatur variabel: 0 - 10 m/menit - Penjepitan material hidrolik dengan pengaturan tekanan penjepitan - Sistem pendinginan - Konveyor serbuk serpihan - Daya penggerak total: 400 V / 8,5 kW - Kebutuhan ruang sekitar: L 2350 x T maks. 2340 x P 3050 mm - Berat sekitar: 1900 kg - Jalur rol masukan: 1500 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Produsen: ROVETTA Iodoyv I N Sspfx Adhoth Model: SC2-630 Tahun: 1995 Kondisi: Bekas Nomor stok: 0393 Daya tekan: 630 ton Jumlah titik tekan: 2 Langkah slider: 152 mm Penyesuaian slider: 203 mm Ukuran meja: 1.830 x 1.220 mm Ukuran slider: 1.830 x 1.220 mm Luas bukaan depan: 1.880 mm Jumlah pukulan/menit: 25-60 Daya motor utama: 58 kW

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), de-to-hu-Werkstatt-Zahnradpruefgeraet Itsdpfx Ajy Ax Thedhoh

Kondisi: bekas, Tahun pembuatan: 1964, nomor mesin/kendaraan: 64 / 39.9037 / 2, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 1.200 t, panjang langkah: 600 mm, lebar meja: 4.500 mm, panjang meja: 2.700 mm, tabel jarak ke piston: 1.600 mm, jarak antara tiang: 5.200 mm, berat keseluruhan: 400.000 kg, Perlengkapan: dokumentasi / manual, Pressing force: 1,200 t Ram stroke: 600 mm Ram adjustment: 600 mm Stroke rate: approx. 9 strokes/min Shut height: approx. 1,600 mm Drawing system: Blankholder force: approx. 225 t Blankholder stroke: approx. 200 mm Pneumatic ejector in ram: Force: approx. 95 t Ijdpfx Adsy An H Rshsth Stroke: approx. 150 mm Heavy-duty mechanical eccentric drawing press in robust double-column design from Schuler, engineered for continuous industrial operation in the automotive sector. The machine features a pressing force of 1,200 t as well as a fixed ram stroke of 600 mm, in addition to a ram adjustment of 600 mm. The stroke rate is approximately 9 strokes per minute. The shut height is approx. 1,600 mm, allowing for the processing of large-volume tools and components. A particular highlight is the large working area with a table size of approx. 4,500 mm as well as a movable / extendable press table, which significantly simplifies die setting and tool changes, making the machine ideal for use with heavy tooling. The integrated drawing system (blankholder cushion) provides a pressing force of approx. 225 t with a stroke of approx. 200 mm, enabling demanding deep-drawing and forming operations as typically required in body shell manufacturing. Additionally, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), which supports automated part removal. Since the 1990s, the press has not been operated in continuous production at its current location and has only been used for testing purposes.

Tahun pembuatan: 1984, Kondisi: sangat baik (bekas), • Year of manufacture: 1984 • Main motors: 2 x 55 kW • Maximum saw blade diameter: 300 mm • Maximum cutting height: 200 mm • Track width: 350 mm Isdelrxfqjpfx Adheth • Shaft length: 430 mm • Shaft diameter: 60 mm • Feed speed controlled by frequency inverter

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Twin-head automatic saw for cutting aluminium and PVC profiles, featuring electronic control and pneumatic tilting of the heads. Equipped with a virtual tilt axis for the saw heads. Itjdpfx Aowwtwqjdheh Cutting length: 5000 mm Control: Electronic with automatic movement of the movable head Head tilting: Pneumatic, with adjustable angles (range from 90° to 45°). Manual setting of heads for remaining angles, down to 20°30’. Additional features: Hydro-pneumatic blade feed, profile clamping.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.230 kg, AUTOMATIC SAW / DOUBLE-HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Itsdpfor E Alqex Adhjh

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Itedpfx Asyttrxedhjh Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection molding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tons Tie bar spacing: 720 x 720 mm Minimum/maximum mold height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Itsdpfx Ajv S E Dgodhsh Max. shot volume: 392 cm³ Injection weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Injection weight in PS: 31 g Control system: Selogica Please request technical specifications.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 1.450 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 10.900 mm, lebar total: 2.550 mm, tinggi total: 3.200 mm, berat keseluruhan: 25.500 kg, diameter rotor: 680 mm, kecepatan rotasi (maks.): 31 rpm, kecepatan rotasi (min.): 18 rpm, lebar bilah: 60 mm, torsi: 240.000 Nm, daya: 257,42 kW (349,99 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Lindner Miura 1500DK – Shredder Dua Poros Data Teknis: - Tahun pembuatan: 2021 - Jam operasi: 1.450 jam Penggerak: - Produsen mesin: Scania - Tipe mesin: DC09 - Daya mesin: 257 kW - Bahan bakar: Diesel Sistem penghancuran: - Shredder dua poros Iodpfx Aoyzdvfjdheth - Penggerak langsung hidrolik (dikontrol sesuai beban) - Torsi: hingga sekitar 240.000 Nm Chassis / Berat: - Rangka berjalan berantai - Berat total: sekitar 25.500 kg Perlengkapan: - Sistem penekan debu - Sistem cepat ganti poros FX Bahan yang dapat diproses: - Sampah hijau - Kayu bekas - Bonggol akar - Sampah besar

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Ijdpfxshlnzke Adheth

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Isdpfx Aoyq Avhedhoth Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: bekas, Tahun pembuatan: 2002, Mesin edging softforming dua sisi HOMAG tipe Power KF 20/34/QE/30, No. mesin 0-202-25-8815, tahun pembuatan 2002. Itsdpfx Aeyyxc Rsdhsh

Kondisi: bekas, Tahun pembuatan: 1990, Tenoner ganda dengan 3+3 motor, dilengkapi dengan kabin pelindung dan peredam suara, bukaan 6 meter. Itsdpfx Ajyzraljdhsh

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Iedpeu Ekbnsfx Adhoth Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: sangat baik (bekas), translation-001 Itedpfx Adewz Ic Aehjh

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Ijdsunrwnepfx Adheth Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Itsdelikydopfx Adheh Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Control system: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (per side): Pre-milling cutter (trimming) 1 x 4.5 kW (hydro) Milling unit KD 11 (2 x 8.1 kW) hydro EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot No. 6) Edge pressure zone "C" Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free slot

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Iedpfx Aeifnxxedhjth Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°