Beli Basah Penggilingan Mesin bekas (78.775)

Kondisi: baik (bekas), Tahun pembuatan: 2008, panjang penggilingan: 1.250 mm, panjang meja: 1.250 mm, beban meja: 1.200 kg, lebar meja: 500 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 1.000 rpm, berat keseluruhan: 9.300 kg, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, daya: 185 kW (251,53 hp), tegangan masuk: 400 V, kebutuhan tinggi: 2.870 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance from table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Lrsdpfx Ageu Hiq Roljg Note: The grinding area in the cross direction (Z-axis) depends on the travel and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data.

Kondisi: baik (bekas), Tahun pembuatan: 1980, Tischgröße 1.100 x 760 mm Motorleistung 4,7 kW Spindeldurchmesser 30 mm Drehzahl(en) 3.000/4.500/6.000/9.000 U/min - Polumschaltbarer Motor RS-LS-Lauf - Steckdose für Vorschubapparat - Aigner Fräsanschlag - Aigner Spannlade - Holz Her Vorschubapparat Typ 1117, 3 Achsen mit 9 Vorschubrollen 110 x 50 mm Lodpfsxzuwwsx Aglorg

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 50 h, nomor mesin/kendaraan: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with crosswise T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool release: pneumatic Lredpfx Agowwq Hceleg Blow air / MQL: external Linear Axis Drives Feed rate X and Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light gray Z-slide and milling head: orange Additional Equipment - 15-position tool changer - Control unit in separate, mobile console

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Lsdpsw Au H Refx Agljrg Connection data Connected load: 40 kW Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 1095, ger-zimm-umf-0624 Lrodsxy Ntqopfx Aglsg

Kondisi: diremajakan ulang (bekas), SZ2-Zimmermann-HU Ljdsx Ahi Aspfx Aglerg

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 306, en-001 Lrsdpfx Ajvy Dugoglog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Commissioning: 2014 Control System: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on time: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Axis Travel Ljdjwywciopfx Aglorg X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping Table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply system with belt filter unit - 50-position chain-type tool magazine - Work area enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the Machine Fully functional, in very good condition, and still under power for inspection! Images are for illustration purposes and depict a new machine of this type. Original pictures to follow shortly!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, First commissioning: 2000 Control unit: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Lrsdpfx Agsw Rl S Sslsg !!! Spindle completely overhauled at the end of 2024 !!! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - Illustrated additional clamping table not included in scope of supply Condition of the machine Fully functional, very good condition. Machine remains powered and is available immediately.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control: Heidenhain TNC 640 with HR 520 handwheel Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminium with cross T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Air blast: external Drives Linear Axes Feed rate X- and Y-axis: up to 60 m/min Feed rate Z-axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Z-slide and milling head: blue Additional Equipment - 15-position tool changer - Oriented milling spindle, e.g. for thread cutting - Direct path measuring system on all 5 axes Lrsdpfx Agjxm Tv Aoljg - Two-sided enclosure - Heidenhain TT140 (optional at extra cost) - Heidenhain TS260 (optional at extra cost) - 3D machine model (optional at extra cost) Condition of the Machine Fully functional condition, immediately available and still under power until November 2025

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Dear customers, we are currently offering you a fully refurbished Zimmermann oscillating drum sanding machine for model and mold making. Here are the technical specifications for type OZS: Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Drum diameter: 20-120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Lodpfxsxlzize Aglerg With emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been freshly painted in RAL 7035 light grey. A completely new control cabinet has been built and installed, meaning the electrics are entirely new. For machine safety, a motor brake as well as an emergency stop system have been installed. Mechanical parts were purchased from the manufacturer or custom-made. The scope of delivery also includes a drum of your choice as well as sanding sleeves and other machine-specific accessories. The machine is sold with a 6-month warranty! Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please feel free to contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 82.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.750 mm, kecepatan pemakanan sumbu X: 65 m/menit, laju pemakanan gandar Y: 65 m/menit, laju pemakanan sumbu Z: 65 m/menit, kecepatan spindel (maks.): 20.000 rpm, gerak cepat sumbu X: 65 m/menit, pergeseran cepat sumbu Y: 65 m/menit, pergerakan cepat sumbu Z: 65 m/menit, torsi: 63 Nm, berat keseluruhan: 90.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece dimensions: 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining in a single setup (90° fixed A-axis) using a 300 mm long tool is possible. Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table The machine is offered without a machine table. We are happy to offer a customized solution at additional cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axis drives Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s² Lrodpfoxl R Hvox Agleg Electrical specifications Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions & weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 Light Grey Milling head and applications: RAL 5002 Aquamarine Blue Additional features - Minimum quantity lubrication - 50-tool automatic tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Machine condition Fully functional, very good condition. Can be inspected under power until April 2026.

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), - BEKAS - MESIN MILLING CNC KOLOM BERJALAN DENGAN KEPALA Sumbu A/B OTOMATIS PERGERAKAN MEMANJANG: 4000 mm PERGERAKAN MELINTANG: 1200 mm PERGERAKAN VERTIKAL: 2000 mm FEED CEPAT L-T-V: 15 m/menit UKURAN MEJA: 5000 x 2000 mm SPINDEL: 4000 rpm; 27 kW; 1200 Nm KEPALA: Sumbu A/B Otomatis; A 2,5° - B 2,5°; ISO 50; 4000 rpm MAGAZINE TOOL: TIPE RANTAI; 30 POSISI UNIT KONTROL: SELCA S3045 BERAT: 25.500 kg Lrsdpfx Agjh Stzksleg AKSESORIS: KONVEYOR SERPIHAN; HANDWHEEL PORTABEL CATATAN: EKSTENSI 400mm - ISO50 - 6.500rpm; PERTUKARAN KEPALA OTOMATIS; PENGAMAN KELILING

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERGERAK DENGAN MEJA PUTAR DAN GESER GERAK LONGITUDINAL: 8000 mm GERAK TRANSVERSAL: 1500 mm GERAK VERTIKAL: 2500 mm GERAK CEPAT L-T-V: 35 m/menit UKURAN MEJA: 2000 x 2000 mm GERAK TRANSVERSAL MEJA: 1500 mm KEPALA: SUMBU A/B OTOMATIS; KONTINU; ISO 50; 7000 rpm; 49 kW; 1180 Nm MAGAZIN TOOL: TIPE RANTAI; 80 POSISI UNIT KENDALI: HEIDENHAIN iTNC 530 AKSESORIS: KONVEYOR SERBUK LOGAM; Lredpfewl R Agsx Agljg LASER TOOL SETTER; HANDWHEEL PORTABEL CATATAN: DENGAN MEJA PUTAR 1500X1500 mm

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), - BEKAS - MESIN CNC MILLING TIPE JEMBATAN 5-SUMBU PERJALANAN LONGITUDINAL: 2500 mm PERJALANAN MELINTANG: 3500 mm PERJALANAN VERTIKAL: 1300 mm PERGERAKAN CEPAT L-T-V: 40 m/menit Lsdpfxowla Hnj Agljrg UKURAN MEJA: 3500 x 2500 mm KEPALA: SUMBU A/B OTOMATIS; Sumbu A ±185° - Sumbu B ±270°; HSK A100; 12000 rpm MAGAZINE TOOL: TIPE RANTAI; 64 POSISI UNIT KONTROL: HEIDENHAIN TNC640 BERAT: 51370 Kg AKSESORIS: COOLANT TEKANAN TINGGI; KONVEYOR SERBUK; LASER TOOL SETTER; FILTER KERTAS; PROBE SENTUH; HANDWHEEL PORTABEL

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERJALAN DENGAN KEPALA OTOMATIS SUMBU A/B JARAK GERAK LONGITUDINAL: 3500 mm JARAK GERAK TRANSVERSAL: 1100 mm JARAK GERAK VERTIKAL: 1500 mm LAJU RAPID L-T-V: 40 m/menit UKURAN MEJA: 3800 x 1000 mm KEPALA: OTOMATIS SUMBU A/B; POSISI MILLESIMAL; ISO 50; 5000 rpm; 34 kW MAJALAH ALAT: TIPE RANTAI; 40 POSISI UNIT KONTROL: HEIDENHAIN TNC 640 COOLANT TEKANAN TINGGI: 40 Bar BERAT: 35.020 kg DIMENSI KESELURUHAN: 8760 x 4950 x 3780 mm AKSESORIS: - Konveyor serbuk Ledpfxjwla Hzo Aglorg - Laser tool setter - Touch probe - Portable handwheel

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 004-040.0004, CNC cylindrical grinding machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear axes / Guides X-axis (cross slide): maximum travel approx. 310 mm X-axis traverse speed up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): maximum travel approx. 850 mm Z-axis traverse speed up to approx. 30,000 mm/min Grinding spindle / Grinding wheel Main spindle power, e.g., 12.5 kW in standard version Grinding wheel diameter standard, e.g., Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g., grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Standard control, e.g., FANUC 31i-A (PC integrated) with StuderWIN operating interface Guideways: machine bed made of Granitan® S103 (mineral cast) for thermal stability and damping Lrjdpfxextpnzs Agljg Dimensions / Power supply Total machine weight approx. 8,500 kg Power supply typical 400 V / 50 Hz (country-specific)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Diameter roda – maks. 10 – 330 mm Lebar roda 180 mm Modul – maks. 7 Modul – min. 0,5 Panjang penjepitan 420 mm Ledow I Hq Dopfx Agljrg Jumlah gigi 10 – 600 Sudut heliks – maks. +/- 45° Kecepatan putar 1100 – 1900 rpm Diameter batu gerinda 280 – 350 mm Lebar batu gerinda 84 – 104 mm Berat mesin sekitar 5,1 t Kebutuhan ruang sekitar 4,5 x 6,0 x 2,3 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Diameter roda - maks. 820 mm Lebar roda 300 mm Modul - maks. 8 Modul - min. 0,5 Panjang penjepitan 865 mm Jumlah gigi 10 - 600 Sudut heliks - maks. +/- 30 ° Lrjdpfx Agowy H Ihjlsg Kecepatan putar 1100 - 2150 rpm Diameter roda gerinda 280 - 400 mm Lebar roda gerinda 84 /104 Berat benda kerja maks. 300 kg Berat mesin sekitar 11,5 t Kebutuhan ruang sekitar 6,0 x 4,8 x 2,9 m termasuk filter Reishauer AF, cakram, flens,...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Travel (X/Y/Z): 400 / 320 / 400 mm Control: HEIDENHAIN TNC 410 Spindle speeds – stepless: 0 – 4,000 rpm Quill stroke: 60 mm Lsdeunt Ihspfx Aglsrg Tool holder: SK 40 Clamping surface of table: 650 x 350 mm Total power requirement: 6.5 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.5 x 1.8 x 2.0 m Electronic handwheel: HR 410 Touch probe: MP 11, automatic tool measurement: TT 120 Enclosure, tool holders, ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, 4368a28a-231a-4e33-aa43-2d46d600f63a Lrsdpfount Eysx Aglsg

Kondisi: siap digunakan (bekas), produsen pengendali: ECS AZ 200 CNC, berat kosong: 8.500 kg, 5 sumbu simultan Perjalanan longitudinal maksimum poros X: 1500 mm Perjalanan melintang maksimum poros Y: 750 mm Perjalanan maksimum poros Z: 700 mm Daya pada spindle: 2,2 kW Penerimaan pada kepala bor (ISO): ISO-40 Kecepatan spindle: 80 – 3600 rpm AKSESORIS & PERLENGKAPAN: ya Pompa pendingin: ya Lodpfx Ageycy Edolerg Pemegang alat: ya Jumlah alat: 24

Kondisi: siap digunakan (bekas), berat kosong: 7.000 kg, + 3 kepala bebas Perjalanan longitudinal maksimum sumbu X: 1500 mm Lredpjycy Eksfx Aglog Perjalanan silang maksimum sumbu Y: 800 mm Perjalanan maksimum sumbu Z: 500 mm Daya pada spindle: 15 HP / 11 kW Tipe kepala milling: ISO 50 Kecepatan spindle: 31 > 1400 rpm Ukuran meja: 2000 x 600 mm Layar digital: Heidenhain 3 sumbu

Kondisi: siap digunakan (bekas), tinggi total: 3.300 mm, lebar total: 3.450 mm, panjang total: 6.000 mm, produsen pengendali: Siemens, berat kosong: 17.000 kg, Model: FTV 850 Pendinginan melalui spindle Area kerja dapat dibagi menjadi dua bagian Ljdpfx Agewxz D Usljrg 2 meja magnetik Kolom bergerak, mirip dengan Mazak VTC / Unisign / Hedelius Struktur sasis berat Gerak longitudinal sumbu X: 1800 mm Perjalanan silang sumbu Y: 850 mm Gerak sumbu Z (Tinggi): 800 mm Dimensi area penjepitan - meja: 2300 x 900 mm Universal (2x 360°): ISO 50 Kepala bor (1 x 90°): 19 kW

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 24.970 h, nomor mesin/kendaraan: 15175183974, No. Inv.: 371400, lintasan X/Y/Z: 1.800x700x700 mm, berat maksimum benda kerja: 1.500 kg, kecepatan spindle: 20 - 8.000 rpm, dudukan alat: SK40, penukar alat 60 posisi, berat mesin: 13.250 kg, dengan kontrol SIEMENS Sinumeric 840D sl, handwheel elektrik, konveyor serbuk, No. inv.: 473100, unit hidrolik, dengan meja penjepit bersalur-T, sekitar 210x70 cm, dengan meja putar terintegrasi, sistem penjepit titik nol, 4x ragum NC HILMA NC 125, 1 konsol GARANT Zeroclamp. Lrodpoyciunefx Agleg