Beli Fp3 bekas (105)

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 380 mm, Perlengkapan: dokumentasi / manual, Sayangnya harus dijual karena keterbatasan ruang. Berasal dari bengkel pelatihan, sangat terawat. Saya juga tidak punya waktu untuk menggunakannya. Siap digunakan kapan saja untuk pengujian. Aksesori seperti holder pengukur 3D, pisau frais, dan lain-lain tersedia. Tsdpfxoxudw He Aatsf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW Tedpfsxu E I Hjx Aatjf >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Mesin Frais Universal DECKEL FP 3 Todpfxsxuh Rdj Aatjf Dengan tampilan digital aktif 3 sumbu Heidenhain TNC 11 Tahun pembuatan: 1984 Perjalanan sumbu: X 500, Y 300, Z 400 mm Rentang putaran: 25 – 2500 rpm Dengan perlengkapan berikut: Meja sudut tetap 850 mm x 400 mm area penjepitan Meja putar berputar Ø 450 mm dengan cakram pembagi Kepala slotting Kepala milling vertikal yang dapat digeser Kepala bor yang dapat ditarik keluar Feed kontinu melalui potentiometer Berbagai arbor frais SK 40 / S22 x 2 Wadah serpihan Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z Lampu mesin Sistem pendingin 4 buah alas mesin Petunjuk pengoperasian

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2351, jarak pergerakan sumbu X: 490 mm, jarak lintasan sumbu Y: 370 mm, kecepatan spindel (maks.): 2.000 rpm, lebar meja: 255 mm, panjang meja: 900 mm, Tanpa harga minimum – penjualan dijamin untuk penawar tertinggi! Tjdpfx Aajxqm Aqetsf Mesin dilelang akibat penutupan operasi. Penawaran bersifat mengikat untuk pengambilan tepat waktu antara 26.01.2026 dan 29.01.2026! DETAIL TEKNIS Perjalanan sumbu X: 490 mm Perjalanan sumbu Y: 370 mm Kecepatan spindel: 40 - 2.000 rpm Koneksi alat: SK 40 Gerakan blok spindel otomatis: 290 mm Gerakan blok spindel manual: 300 mm Penyesuaian ketinggian spindel milling secara manual: sekitar 100 mm Dimensi meja: 900 x 255 mm Rentang feeding: 10 - 500 mm/menit Movement cepat: 1.500 mm/menit DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 2.000 x 1.500 x 1.900 mm Berat: 1.500 kg PERLENGKAPAN Layar digital 3-axis Rahang ragum mesin terpasang (lebar rahang 160 mm)

Kondisi: bekas, Technical details: X-travel: 600 mm Y-travel: 300 mm Z-travel: 360 mm Tjdpsu U E T Iefx Aatsf Speed range: max. horizontal: 40–2000 rpm Spindle taper: vertical / horizontal: SK 40 / SK 40 Speed range: max. permissible: 40–2000 rpm Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Dimensions (LxWxH): approx. 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Kondisi: baik (bekas), Tahun pembuatan: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by appointment. Tjdpfx Aajxu Uvtetjf

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, We hereby offer milling machines of the type Deckel FP3. Each machine undergoes at least a thorough technical inspection in our workshop to ensure full operational functionality. We are looking forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg Travel distance X-axis: 500mm Travel distance Y-axis: 300mm Travel distance Z-axis: 380mm Table clamping surface: 800x420mm Spindle speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500mm/min Rapid traverse: approx. 1500mm/min Todpfx Aajq H Eabjtsf Additional equipment and accessories: on request Our service commitment to you: - We are a certified master craftsman business specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand - Upon request, we can overhaul your selected machine completely or partially - You may freely choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can also install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation for you

Kondisi: bekas, Power output 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you the following from stock, subject to prior sale or error, without obligation: DECKEL Universal milling machine with FAGOR 3-axis digital readout Model: FP 3 Year of manufacture Serial No. Table travels: longitudinal motorized / manual 490 / 500 mm vertical motorized / manual 370 / 380 mm Cross slide travel: motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Distance spindle to table 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feeds 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive 3 kW Total power 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special Features Todov Nq Skopfx Aatef • FAGOR 3-axis digital readout V 300 (glass scales) with extended functions such as chain dimension, absolute dimension, mm/inch switch, etc. • Moveable DECKEL universal vertical milling head, swiveling +/- 90° • Original Deckel tool cabinet with extensive accessories such as a variety of toolholders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Add-on manual DECKEL universal rotary table Ø 380 mm with direct and indirect indexing, various index plates • Coolant system, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well maintained! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net, strictly upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please contact us!

Kondisi: baik (bekas), Tahun pembuatan: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by appointment. Tedpfx Aasu Ezb Estef

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital display AXESTA and 2 accessory cabinets – ex-university, in very good condition Technical data: >> Machine No.: 0494 >> 3-axis digital display AXESTA >> Rotary-tilt-swivel table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel paths X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle Todpfx Ajxxzl Neatsf >> Vertical quill and horizontal quill extendable – SK-40 >> Clamping system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> 3-axis digital display AXESTA >> Coolant system >> Central lubrication 2 accessory cabinets including: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, machine vice, tailstock, faceplate, additional small rotary-tilt-swivel table, rotary table, tailstock, machine vice, and much more About the machine: Offered for sale is a Deckel FP3 universal milling machine in very good condition. All spindles move smoothly. The machine comes equipped with 2 tool cabinets and accessories. The previous location was a university. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital display makes work easier and even more precise. Take advantage of the opportunity to inspect and test the Deckel machine on site under power.

Kondisi: baik (bekas), Tahun pembuatan: 1998, The machine is dirty. Technical condition: good. Rotary and swivel table is installed. Tjdjvptmkspfx Aatjf

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 36109, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 6.000 m/menit, pergeseran cepat sumbu Y: 6.000 m/menit, pergerakan cepat sumbu Z: 6.000 m/menit, daya nominal (semu): 16 kVA, tinggi total: 2.000 mm, panjang total: 3.000 mm, lebar total: 2.800 mm, lebar meja: 480 mm, panjang meja: 800 mm, beban meja: 530 kg, kecepatan rotasi (min.): 31 rpm, kecepatan rotasi (maks.): 5.000 rpm, berat keseluruhan: 2.800 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Mesin dalam kondisi baik, masih berjalan mulus dan menghasilkan pekerjaan yang presisi. Mesin dapat dilihat dalam keadaan beroperasi. Tjdpsxt Nlyofx Aatef

Kondisi: bekas, Dijual mesin frais alat yang terlihat pada foto, buatan perusahaan Jerman Deckel model FP3A. Mesin ini dapat beroperasi dalam mode manual, semi-otomatis, dan otomatis. Pengoperasian menggunakan G-code. Jenis kontrol: CNC 2102 Deckel. Tedpfoxluu Rox Aatjf

Tahun pembuatan: 1975, Kondisi: baik (bekas), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition. Can be demonstrated under power by appointment. Todeildwxspfx Aatef

Kondisi: baik (bekas), Nomor gudang: 3012 Produsen: Deckel Nomor mesin: 3686 Tipe / Model: FP 3 Tsdpfxsxcillo Aatjf Perjalanan sumbu x-y-z: 500 - 300 - 380 mm Jarak gerak spindle: 95 mm Meja: 650 x 370 mm Rentang kecepatan putar: 40 hingga 2.000 rpm Taper spindle: SK 40 Feed: 10 hingga 500 mm/menit Daya terpasang: 2,2 kW Aksesori/perlengkapan: Meja universal putar, miring dan tilting; Display digital Elesta Kondisi: baik Berat: 1,3 t Dimensi: 1.500 x 1.800 x 1.800 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with new 3-axis FPS Aktiv Digital Readout Heidenhain Completely overhauled by FPS in 2015 As-new condition Technical data: - Year of manufacture: 1980 Machine No. 2201-5045 Tsdpfx Aaju Dm E Hotof - Fixed angle table - Spindle speed: 25 – 2,500 rpm - Infinitely variable feed rate on 3 axes - Rapid traverse on 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head adjustable on the spindle carrier by 200 mm - Vertical and horizontal quill – SK40 extendable - Drawbar M16 - Weight approx. 1,500 kg Accessories and features: - 3-axis Aktiv digital readout Heidenhain (latest version) - Coolant system - Central lubrication system About the machine: Offered is a universal milling machine Deckel FP3 in as-new condition. The FP3 was completely overhauled by FPS in 2015 and has since seen very little use. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is steplessly adjustable in all three axes. Additionally, the machine features rapid traverse in each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain path control system, you can enter dimensions that the machine automatically moves to. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Brand: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating manual - Drill grinder with diamond wheel Tedpfx Aash Rv U Eetef -Used, as seen-

Kondisi: baik (bekas), Various Deckel FP3 milling machines are for sale, all of which are in good condition. A special feature of this machine is the mounted table, which can be swiveled, rotated, or shifted. Purchasing the machine with a "standard" milling table is also possible. The machine has been cleaned and inspected by us. On request, safety devices can be installed for an additional charge. Dimensions (L x W x H): approx. 2000 x 1600 x 1900 mm Weight: approx. 1,500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel distances: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverse: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Prices are plus VAT Tsdpfxeiz T Exo Aatof Viewing possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, visit our website.

Tahun pembuatan: 1990, Kondisi: baik (bekas), Various collets and holders, approx. 300 pieces. Suitable for DECKEL milling machines FP1 – FP2 – FP3 – FP4 Tjdpfx Aehvz Iioatof Individual sale upon request.

Kondisi: baik (bekas), Tahun pembuatan: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, operational condition. Can be demonstrated under power by prior arrangement. Tedpfx Aouclbzjatjf

Kondisi: bekas, nomor mesin/kendaraan: 2820-0419, Travel (X): 500 mm Travel (Y): 400 mm Travel (Z): 400 (340) mm Todpfx Aaeh Ra Nistof Table surface: 710 x 430 mm Spindle speed range: 40 - 4000 rpm Feed range: 0.2 - 3600 mm/min Rapid traverse: 4.0 m/min Head swivel +/-: 90° Quill stroke: 80 mm Spindle taper: SK 40 Control: Contour 3 Total power requirement: 5.5 kW Machine weight approx.: 1.9 t Footprint approx.: 2 x 1.4 x 1.8 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with 80 mm quill stroke, feeds and rapid traverses in 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, machine lighting, chip splash guard enclosure with chip tray, pendant control panel, and electronic handwheel. The machine is in good condition.

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1994, nomor mesin/kendaraan: 2803-2194, Universal milling machine Deckel FP3 with 3 – with Deckel Analog 4 control (defective) Technical data: - Year of manufacture: 1994 - Table diameter: 500 mm - Speed range: 40 - 2000 rpm - Drive power: 3 kW - Travel distances X/Y/Z - Weight approx. 1500 kg Accessories and equipment: - Deckel Analog4/Grundig Dialog control display (defective, exact fault unknown) Todpfeu U I Iusx Aatef About the machine: Offered is a Deckel FP3 NC universal milling machine in externally good condition. The spindles move easily. The rotary T-slot table is in good condition. Mechanically operational, however, the control system is defective. Precise fault unfortunately unknown. Sale on behalf of a customer, without any warranty and as a source of spare parts only.

Kondisi: baik (bekas), Tahun pembuatan: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle mount. Good, operational condition. Can be demonstrated under power by arrangement. Tsdjwg S Nkopfx Aatjf

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP3 mesin frais alat dengan digital readout Heidenhain 3-sumbu, meja tetap, dudukan spindle SK 40, aksesori: berbagai collet dan arbor frais, penyangga belakang. Kondisi operasional baik. Dapat didemonstrasikan dengan listrik sesuai janji. Tedpfjxdr Uxjx Aatof

Tahun pembuatan: 2025, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, EN-2025-06-29-LSV1293 Tjdpfjxb Acbjx Aatjf