Beli Benjolan Breaker bekas (590)

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2642309, jenis bahan bakar: diesel, produsen motor: Deutz TCD6.1L6-SV, Verwendungszweck: Bauwesen Hodpfoxuzvmjx Aa Iep

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Hodpfxozd Sdgj Aa Ijp Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Eos EOSINT Plastic Laser Sintering System Here we offer an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sintering System P385 The following items are included with the EOS P385 system: - Build chamber - Powder container - Chiller: Termo TEK Termochiller 1100 The following upgrades have already been carried out: - Software: CDs Eosint P3 Process Software PSW 3.2 for Windows 2000, XP - Materialise: Magics RP 9.0 - Machine upgrade from P360 to P385 on 10/08/2007 - Laser replacement 15/05/2008 - X-axis drive motor: replacement with a used motor on 04/05/2020 - Pyrometer replacement 30/06/2020 Build volume: 350 mm x 350 mm x 610 mm Voltage: 3/N/PE/400V, frequency 50 Hz Connected load: 8 kW, circuit breaker 32 A Max. laser power: 100 W, laser class open: 4 Laser class closed: 1 Weight: 850 kg Hedpfxjzdyx Ej Aa Isp Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change or error!) For further questions, please feel free to contact us by phone.

Kondisi: bekas, jarak tempuh: 290.157 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 09/2022, jenis bahan bakar: diesel, berat keseluruhan: 25.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 07/2026, rem: retarder, warna: abu-abu, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2022, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: baru, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €1,896.69 Grinding wheel dimensions: 200 x 32 x 32 mm Motor: 1 kW Hodoy Ig N Iepfx Aa Ijp Speed: 2,550 rpm Extraction port diameter: 42 mm Length: 270 mm Width: 470 mm Height: 1,050 mm Transport dimensions: 600 x 800 x 1,350 mm Weight: 60 kg Smooth-running, maintenance-free motor Laterally enclosed protective hoods Stable, adjustable workpiece supports High safety standards due to adjustable spark deflectors Suitable for grinding, deburring, and sharpening of all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Dual-sided spark/eye protection Power cable with 16 A CEE plug Includes 1 coarse and 1 fine grinding wheel 12-month warranty for single-shift operation Ref.: 317.774 with machine stand, emergency-stop push button, and brake OPTION (price on request): Foot pedal as emergency stop ALTERNATIVE VERSIONS: Ref.: 317.762 table-top version Ref.: 317.777 with MA400D integrated extraction, machine stand, emergency-stop push button, and brake

Kondisi: bekas, jarak tempuh: 62.200 km, daya: 350 kW (475,87 hp), pendaftaran pertama: 07/2000, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: merah, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, kelas emisi: euro2, Tahun pembuatan: 2000, lebar total: 2.500 mm, tinggi total: 3.900 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, penggerak semua roda,

Kondisi: bekas, jarak tempuh: 62.200 km, daya: 350 kW (475,87 hp), pendaftaran pertama: 07/2000, berat keseluruhan: 18.000 kg, jenis bahan bakar: diesel, warna: merah, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, kelas emisi: euro2, Tahun pembuatan: 2000, lebar total: 2.500 mm, tinggi total: 3.900 mm, Perlengkapan: ABS, pemanas parkir, pendingin udara, penggerak semua roda,

Kondisi: bekas, jarak tempuh: 432.389 km, daya: 350 kW (475,87 hp), pendaftaran pertama: 09/2018, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 07/2026, warna: merah, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, lebar total: 2.550 mm, tinggi total: 4.000 mm, Tahun pembuatan: 2017, Perlengkapan: ABS, derek, filter jelaga, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 1.685 h, kecepatan maksimum: 80 km/j, berat keseluruhan: 11.500 kg, tinggi total: 2.500 mm, mobilitas: bergerak, nomor mesin/kendaraan: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Several spare flails are still available and will be included. All 8 V-belts replaced recently. Both NOx and AdBlue sensors are new. Important note: Drawbar is bent, so the machine currently does not have road approval. Throughput: 60-100 m³/h, depending on the material and feed device Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Hjdpoy Hi D Ssfx Aa Ijp Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s description: FLAIL SHREDDER HFG VI “These powerful Husmann machines, designated 'HFG (Husmann Forestry Equipment),' achieve uniform, fine, and clean shredding through a special impact technology and flail arrangement. The shredded material is transported via a spacious intake hopper with a forged steel chain conveyor to the feed roller and then to the flail rotor. The pendulum-mounted feed roller is guided with a rack and hydraulically driven by a large reduction gearbox. The feed roller, which adapts to the incoming material, can also be controlled and lifted using the remote control. The roller or feed opening of 460 mm ensures smooth and rapid feeding. The robust rotor, made of high-quality steel (1000 kg), is fracture-proof even when handling heavy foreign materials, thanks to additional bracing and sophisticated design. Sixty free-swinging flails are staggered on eight hardened flail shafts. The quick-change system allows the tungsten carbide-tipped flail tips to be bolted onto the flail holders. Thanks to the large number of 50 mm wide flails, and the rotor’s direction of rotation over a breaker bar toward the infeed belt, the material is shredded optimally and made suitable for composting. The quality of the end product can be further adjusted and improved by the load-dependent and infinitely variable feed speed of the scraper floor and the feed roller. The rotor trough and discharge area design allow stockpiling up to 2.5 meters high. The powerful superstructure engine with 205 kW is easily accessible through large compartment doors, making operation and maintenance straightforward. User-friendly controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit features an 80 km/h chassis with air brakes and can be supplied as either a stationary device or with a hook lift frame. The HFG IV is a composting machine for organic and inorganic waste designed for mechanical feeding.” If you have any questions or require further information, please feel free to send us a message or give us a call.

Kondisi: bekas, jarak tempuh: 272.250 km, daya: 324 kW (440,52 hp), pendaftaran pertama: 06/2013, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: oranye, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Tahun pembuatan: 2012, Perlengkapan: ABS, pendingin udara,

Kondisi: bekas, jarak tempuh: 386.260 km, daya: 350 kW (475,87 hp), pendaftaran pertama: 09/2020, jenis bahan bakar: diesel, berat keseluruhan: 32.000 kg, konfigurasi gandar: 3 gardan, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang ruang muatan: 6.700 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 800 mm, Perlengkapan: ABS, derek, filter jelaga, pemanas parkir, pendingin udara, sistem navigasi,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 6.000 h, jarak pergerakan sumbu X: 1.530 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 465 mm, produsen pengendali: SIEMENS, model controller: 840D-SPIOS V1, berat keseluruhan: 10.500 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 54, jumlah sumbu: 5, Mesin 5-axis SPINNER U5-1530 ini diproduksi pada tahun 2021. Mesin ini memiliki lintasan yang mengesankan, yakni 1530 mm pada sumbu X, 530 mm pada sumbu Y, dan 465 mm pada sumbu Z. Mesin dilengkapi dengan meja tetap dan kaku yang dikombinasikan dengan meja putar/tilt 2-sumbu, sehingga meningkatkan fleksibilitasnya. Jika Anda mencari solusi pemesinan berkualitas tinggi, pusat pemesinan vertikal SPINNER U5-1530 yang kami tawarkan untuk dijual ini layak dipertimbangkan. Silakan hubungi kami untuk informasi lebih lanjut. Hjdpezc R D Djfx Aa Iop - Jumlah sumbu: 5-axis (pemesinan simultan) - Konfigurasi meja: Meja statis (Starrtisch U-1530) dikombinasikan dengan meja putar/tilt 2-axis (SPRT650 / Versi T) - Kecepatan spindle: hingga 12.000 rpm (Opsi "Advanced Spindle") - Taper spindle: SK40 - Kapasitas magasin perkakas: 54 posisi - Daya hubung singkat jaringan (SK-Netz): >= 1,6 MVA (100xPnE/R-modul dalam kW) - Daya pemasangan: 26 kVA - Tegangan nominal: 3~ 400 V + N + PE - Arus pengaman nominal (In): 50 A - Arus kerja nominal (Ib): 42 A - Frekuensi jaringan: 50 / 60 Hz - Jenis dan koneksi jaringan: TN-Netz (jaringan 5-kawat) dengan titik netral dibumikan dan dimuati - Pemutus arus bocor (FI-Schalter): Tanpa FI-Schalter (disarankan) - Sistem kontrol: SIEMENS 840D-SPIOS V1 (SINUMERIK 840D sl sl SPIOS V2-Platform) - Sistem pengukuran: Skala linier X/Y/Z (U-1530 Advanced) dikombinasikan dengan probe benda kerja 3D BLUM dan sistem pengukuran sumbu B/C - Pendingin melalui spindle (IKZ): Ya, dengan unit pengolahan CTS bertekanan tinggi dan tangki tekanan tinggi (BAZ 70 bar) - Rem putar sumbu: Rem hidraulik di sumbu B dan C dengan rotary union 2-arah (70/7 bar) - Kisaran temperatur lingkungan: 15 °C < T < 35 °C - Kelembapan relatif:

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Short-term availability – YOUR CHANCE! We are offering our well-maintained and fully functional chalet machine from the Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the opportunity to purchase this flawless machine. It is still in current use, so functionality tests and trial runs are no problem. Collection and disassembly by the buyer Assembly in coordination with Krüsi recommended Year of manufacture: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units at 4 kW each, spindle drive via toothed belt - Maximum working area: 250 mm build height and 245 mm wall thickness - With 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on the adjustment spindles for horizontal axes - Pneumatic under-table crosscut saw on the left, 5.5 kW with frequency converter - Drill unit, manual operation, 1.8 kW, mounted on the right side - Hydropneumatic feed for drilling unit - Additional vertical pneumatic clamping cylinder with bracket - Additional horizontal pneumatic clamping cylinder with bracket - Extension table for milling unit, with additional vertical clamping cylinder - 0.5 m stop rail, mounted front left on the machine base - 0.5 m stop rail, mounted front right on the machine base - Additional table for short workpieces - Steel chip chute for pit extraction - Dovetail and tenon slot milling unit (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and tenon slot milling unit: - WS rabbet cutter Ø 230 mm, base Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3, with chip breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3, with chip breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal, top: - WS groove and tenon cutter, aluminum, Ø 270 mm, bore Ø 40 mm, adjustable range 21–40 mm - Center piece, aluminum, Ø 270 mm, width 30 mm, bore Ø 40 mm, Z2 - Center piece, aluminum, Ø 270 mm, width 50 mm, bore Ø 40 mm, Z2 Horizontal, bottom: - WS adjustable rabbet cutter, aluminum, Ø 180 mm, bore Ø 40, adjustable range 26–50 mm, 2 x Z3 F3 - Center piece, aluminum, Ø 180 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical, front: - WS groove and tenon cutter, aluminum, Ø 270 mm, bore Ø 40 mm, adjustable range 21–40 mm - Center piece, aluminum, Ø 270 mm, width 40 mm, bore Ø 40 mm, Z2 Vertical, rear: - WS adjustable rabbet cutter, aluminum, Ø 180 mm, bore Ø 40, adjustable range 26–50 mm, 2 x Z3 F3 - Center piece, aluminum, Ø 180 mm, width 30 mm, bore Ø 40 mm, Z2 Protective cover for upper horizontal unit, with bracket (for cutter Ø 270 mm) Protective cover for rear vertical unit, with bracket (for cutter Ø 180 mm) Hodpfxey Ri Hue Aa Iep

Kondisi: baru, daya: 154 kW (209,38 hp), tipe perpindahan gigi: mekanis, jenis bahan bakar: diesel, kelas emisi: euro2, Tahun pembuatan: 2025, Perlengkapan: pendingin udara,

Kondisi: baru, daya: 353 kW (479,95 hp), jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, warna: oranye, kelas emisi: Euro 5, panjang total: 9.400 mm, lebar total: 2.470 mm, tinggi total: 3.150 mm, Tahun pembuatan: 2023, Perlengkapan: kendali jelajah, kunci sentral, pendingin udara,

Kondisi: baru, daya: 327 kW (444,60 hp), tipe perpindahan gigi: mekanis, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 610 l, kelas emisi: Euro 3, Tahun pembuatan: 2019, jam operasional: 7.900 h,

Kondisi: baru, daya: 327 kW (444,60 hp), jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 610 l, kelas emisi: Euro 3, Tahun pembuatan: 2019, jam operasional: 6.630 h,

Kondisi: bekas, daya: 185 kW (251,53 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, pendaftaran pertama: 01/2017, kelas emisi: Euro 4,

Kondisi: bekas, TECHNICAL DATA - Product: Hydrocarbon Class A3 WASHING CYCLE: - Automatic basket loading - Washing tank filling - Automatic basket rotation - Ultrasonic exposure Hodpfxsug U Sdj Aa Iop - Washing tank draining - Vacuum rinsing in vapor phase with adjustable time - Vacuum drying with adjustable time - Regeneration by vacuum distillation WORK CHAMBER - Diameter: 530 [mm] - Depth: 600 [mm] TANK - Dimensions: 800 x 1100 x 300 [mm] - Volume: 160 [L] - Power supply: 3x 400 [V] ACCESSORIES - Circuit breaker B2008 - Automatic loading with LAUER PCS 095 Plus controller - 5 stainless steel baskets: 445 - MTA cooling unit

Kondisi: sangat baik (bekas), DELTATHERM LT 5.5 Pendingin Proses Produsen: DELTATHERM Tipe: LT 5.5 Tahun pembuatan: 06/2021 Pendingin proses / pendingin industri untuk pendinginan air dan glikol. Cocok untuk pendinginan mesin, mesin perkakas, sistem laser, bangku uji, instalasi produksi, dan aplikasi industri. Data teknis Kapasitas pendinginan: 6 kW Media pendingin: Air / Glikol Kapasitas tangki: 30 liter Refrigeran: R407C Isi refrigeran: 1,8 kg Tekanan operasi maksimum: 28 bar Suhu lingkungan maksimum: 42 °C Tegangan input: 400 / 460 V Frekuensi: 50 / 60 Hz Daya terpasang: 5,3 kW Arus operasi maksimum: 9,1 A Sekering utama maksimum: 16 A Kelas perlindungan: IP54 Kapasitas pompa: 20 l/menit Tekanan pompa: 3,0 bar Hedpfx Aozcx Hgsa Isp Dimensi (P x L x T): sekitar 600 x 600 x 1296 mm Berat: sekitar 140 kg Perlengkapan Pengatur suhu digital Tangki air terintegrasi Kondensor berpendingin udara Konstruksi industri dengan roda Operasi air atau glikol Sakelar utama di bagian depan unit Kondisi Unit bekas. Terdapat tanda penggunaan sesuai usia dan pemakaian. Kondisi visual sesuai gambar. Lingkup pengiriman 1x DELTATHERM LT 5.5 Pendingin Proses Aksesori seperti pada gambar Pengiriman atau pengiriman melalui ekspedisi memungkinkan. Perubahan, kesalahan, dan penjualan antara waktu dapat terjadi. Pertanyaan lebih lanjut bisa dijawab melalui telepon.

Kondisi: bekas, jarak tempuh: 4.116 km, daya: 155 kW (210,74 hp), warna: abu-abu, tipe perpindahan gigi: otomatis, panjang ruang muatan: 45.100 mm, lebar ruang muat: 24.900 mm, tinggi ruang muatan: 22.200 mm, Tahun pembuatan: 2024, Perlengkapan: ABS, kemudi berkuasa, kunci sentral, pendingin udara,

Kondisi: bekas, jarak tempuh: 588.954 km, daya: 330 kW (448,67 hp), pendaftaran pertama: 01/2019, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 08/2026, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 323.000 km, daya: 290 kW (394,29 hp), pendaftaran pertama: 04/2019, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, rem: retarder, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2019, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), tail lift,

Kondisi: bekas, jarak tempuh: 255.000 km, daya: 290 kW (394,29 hp), pendaftaran pertama: 08/2019, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: merah, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, lebar total: 2.550 mm, tinggi total: 3.800 mm, volume ruang muat: 85 m³, panjang ruang muatan: 8.600 mm, lebar ruang muat: 2.430 mm, tinggi ruang muatan: 2.200 mm, Tahun pembuatan: 2019, Perlengkapan: ABS, filter jelaga, pendingin udara, program stabilitas elektronik (ESP), tail lift,

Kondisi: bekas, jarak tempuh: 255.000 km, daya: 290 kW (394,29 hp), pendaftaran pertama: 08/2019, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: merah, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, lebar total: 2.550 mm, tinggi total: 3.800 mm, volume ruang muat: 85 m³, panjang ruang muatan: 8.600 mm, lebar ruang muat: 2.430 mm, tinggi ruang muatan: 2.200 mm, Tahun pembuatan: 2019, Perlengkapan: ABS, filter jelaga, pendingin udara, program stabilitas elektronik (ESP), tail lift,