Beli Meba bekas (37)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
MEBA
Iklan kecil
Jerman
11.023 km
Gergaji pita logam
MEBA560 DG-1000 + PEDDINGHAUS TDK 1000 /9P
Hubungi
Tahun pembuatan: 2001, jam operasional: 33.733 h, Kondisi: siap digunakan (bekas), Data Umum
Ihjdpfsx Sz Exex Aa Njt
Dimensi lebar 4400 mm // 6100 mm
Dimensi kedalaman 3300 mm // 2100 mm
Dimensi tinggi 2800 mm // 3000 mm
Berat mesin 6055 kg // 9000 kg
Media
Konsumsi daya 11 kW
Ini adalah sistem Mesin Pemotong & Bor. Mesin MEBA 560 DG-1000 dan PEDDINGHAUS TDK 1000 /9P ini diproduksi pada tahun 2001. Sistem ini dilengkapi gergaji pita logam dengan kapasitas potong pada 90°: Bulat 560 mm, Datar 1000×560 mm. Dimensi mata gergaji adalah 9300×54×1,6 mm, dan beroperasi pada kecepatan potong 18 hingga 95 m/menit. Mesin bor memiliki 9 kepala bor, 3 per sumbu. Pertimbangkan kesempatan untuk membeli sistem Mesin Pemotong & Bor ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini.
Jenis Aplikasi
Pemotongan
Iklan kecil
Günzburg
11.086 km
BARU gergaji pita
MEBAMEBAswing 320 DG
Hubungi
Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Two speeds: 35/75 m/min
Saw blade speed: 15-150 m/min
Saw blade dimensions: 4200x34x1.1 mm
Cutting range at 90 degrees, round: 325 mm
Cutting range at 90 degrees, flat: 500x300 mm
Cutting range at 45 degrees right, round: 300 mm
Cutting range at 45 degrees right, flat: 300x300 mm
Cutting range at 30 degrees right, round: 200 mm
Cutting range at 30 degrees right, flat: 200x200 mm
Cutting range at 45 degrees left, round: 300 mm
Ihodpfx Aaox Sq Tfo Njt
Cutting range at 45 degrees left, flat: 300x300 mm
Minimum remnant piece length without bundle clamping – manual: 85 mm
Minimum remnant piece length with bundle clamping – manual: 260 mm
Smallest diameter: 5 mm
Working height: 750 mm
Total connected load: 3.0 kW
Dimensions: 1450x2200x1400 mm
Features/Accessories:
- Quick mitre adjustment from 30° to 150°, stepless, with digital mitre display accurate to 0.1°
- Quick-release material clamping: material is clamped parallel at 90° at every saw frame angle
- MEBA high-performance package “HSS” version – Hydraulic raising and lowering of the saw frame and hydraulic clamping of saw material
- Stepless hydraulic adjustment of cutting pressure and feed rate
- Display of lowering speed via scale. Display of cutting pressure via manometer.
- Rapid approach lowering of the saw frame to material edge via push-button
- Frequency-controlled AC drive 15-150 m/min – 3 kW
- Hydraulic full-stroke material clamping
- Machine base with chip collection tray
- Saw blade drive with limit switch
- Precision carbide roller guides for the saw blade, saw blade brush
- Complete coolant system with electric submersible pump
- 1 saw blade on the machine, 4–6 TPI
Iklan kecil
Niederlangen
11.198 km
Mesin gergaji pita
MEBA - VOLLAUTOMATMEBAeco 410 DGA 2300
Hubungi
Kondisi: baru, Cutting diameter: 410 mm
Bandsaw blade length: 5800 x 41 x 1.3 mm
Table height: 750 mm
Cutting area at 90 degrees: flat 700 x 410 mm
Cutting area at 45 degrees: round 410 mm
Cutting area at 45 degrees: flat 500 x 410 mm
Cutting area at 45 degrees: round left 410 mm
Cutting area at 45 degrees: flat left 430 x 410 mm
Cutting area at 30 degrees: round 320 mm
Cutting area at 30 degrees: flat 320 x 410 mm
Cutting speed: 15 - 150 m/min
Maximum workpiece weight: 250 kg/m
Total power requirement: 5.5 kW
Machine weight approx.: 3200 kg
Space requirements approx.: 4500 x 2800 x 2000 mm
- The ergonomic control panel can be networked and offers various option packages
* Teleservice for remote maintenance
* Programming of sawing cycles via the control system
* Import of sawing programs from CAD using DSTV interface and data export
- Automatic material feed:
- Available in compact design for shorter cutting lengths or with flexible feeding gripper in virtually any length
- Precise material positioning via servo positioning technology
- Future-oriented electric saw feed with ball screw drive:
- highest cutting performance and quality, while gentle on the saw blade
- Consistent use of the latest linear guide technology:
- smooth operation, high load capacity, low maintenance, backlash-free
- Unique and patented double mitre system:
Ihedpsx Sr Drofx Aa Net
- Material is always clamped at a right angle
Equipment:
- Automatic cutting pressure and feed monitoring
- Frequency-controlled AC drive 15-150 m/min, 5.5 kW
- Hydraulic full-stroke material clamping
- Automatic movement of the clamping jaws
- Automatic saw frame height adjustment
- Minimum speed and blade monitoring
- Electric mitre adjustment via servomotor
- Visualised program entry with CNC control
- Integrated MEBA gripper feed system, 5-2300 mm per stroke with integrated roller conveyor
*Special equipment:
- Laser line for cut line display / marking cuts
- Powered chip brush
- Micro-lubrication system
- Clamping pressure regulation
- Bundle clamping for material
- Job menu
- Material database
- Zero stop
- Scraper belt conveyor for optimal chip removal, 2000 mm length
- Cut trajectory control

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Niederlangen
11.198 km
Gergaji pita
MEBAMEBAbase 24 DG-HS
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 240 mm
Saw blade length: 2910 x 27 x 0.9 mm
Cutting width: 310 mm
Table height: 900 mm
Cutting speed: 35 + 75 m/min
Total power requirement: 1.1 / 1.8 kW
Machine weight: approx. 470 kg
Space requirement: approx. 800 x 1720 x 1450 mm
Standard equipment of the MEBAbase 24 DG-HS:
- MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade.
- Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy
- The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes
Isdpjwa Ui Tjfx Aa Noht
- End stops at 30° - 45° - 90° - 45°
- Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle
- Centralized machine operation
- Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring
- Saw blade drive with end stop
- Stepless vise jaw adjustment
- Adjustable movable blade guide arm for material width
- Saw blade deflection pulleys with carbide guide
- Practical chip collection tray with drip screen
- Integrated chip cleaning brush
- Mechanical saw blade tensioning
- Operating instructions and spare parts list (digital)
- 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine
- Complete coolant system
- Paint finish anthracite (RAL 7016)
Iklan kecil
Niederlangen
11.198 km
Gergaji pita
MEBA - VOLLAUTOMATMEBAeco 335 DGA 2300
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter 335 mm
Saw band length 4400 x 34 x 1.1 mm
Table height 750 mm
Feed rate 5 - 2300 mm per stroke
Cutting range at 90°: flat 500 x 335 mm
Cutting range at 45°: round 330 mm
Cutting range at 45°: flat 320 x 335 mm
Cutting range at 45°: round (left) 305 mm
Cutting range at 45°: flat (left) 305 x 335 mm
Cutting range at 30°: round 180 mm
Cutting range at 30°: flat 170 x 335 mm
Cutting speed 15 - 150 m/min
Workpiece weight max. 250 kg/m
Total power requirement 3.0 kW
Machine weight approx. 2550 kg
Space requirement approx. 4350 x 2300 x 1900 mm
Standard equipment of the MEBAeco 335 DGA-2300:
- Safety access according to CE standards via light barrier
- MEBA automatic bandsaw in proven twin-column linear design with integrated MEBA gripper feed system from 5 - 2300 mm per stroke
- MEBA visualised program input with CNC control
Fully automatic operation for any angle setting from 30° - 135°, length, and quantity.
Simple program creation and management for up to 255 programs.
Operations staff enter the sawing task using the display template with a cut diagram. Input errors are minimized, ensuring easy and secure creation of production orders by different operators.
- MEBA high-performance package:
Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimum conditions for each sawing task, i.e., constant pressure for solid materials and constant feed for thin-walled profiles.
- Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, including integrated roller conveyor up to 3000 mm.
- Both-sided opening of the gripper feed system clamping jaws.
Ribbed bars for handling heavy materials.
- Saw frame constructed from robust, low-vibration steel welded structure.
- Saw band inclined 3° to the material support surface for highest cutting performance and blade life when cutting structural steel profiles.
- Combined saw band guide, precision bearings for gentle band guiding.
Chamfered carbide slide guides for saw band guidance.
- Mitre pivot point (zero point) is the intersection between the saw band and the fixed clamping jaw, meaning no change in length measurement when changing the angle. Automatic calculation of kerf width at each angle position.
- NC angle programming. Control panel is free-standing as standard on these machines.
- Patented twin-mitre vice system (ERP no.)
Automatic movement of clamping vices. The material clamping vice automatically moves with the desired mitre in the throughput direction, so the material is always clamped square and close to the saw band. Material clamping is performed using full-stroke cylinders.
- Rapid lowering of the saw frame via automatic height adjustment bar until just above the material. For serial cuts, the saw frame only lifts shortly above the material, and a new workpiece can be positioned.
Ijdpfx Aajulnb Dj Nsht
Optimal cycle times for single and serial cutting.
- AC frequency-controlled saw band drive, steplessly adjustable from 15 - 150 m/min
- Zero-play preloaded, low-maintenance recirculating ball linear guides for material feed and saw frame advance for smooth, jerk-free operation...
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBAswing 260 DG
Hubungi
Kondisi: baru, 1
Iedpjd Tb N Aefx Aa Njht
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA320 DG
Hubungi
Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Semi-automatic sawing cycle with workpiece clamping-sawing-frame raise to preset height after completed cut.
Infinitely variable hydraulic cutting pressure and feed rate monitoring at the saw band. This ensures optimum settings for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles.
Especially suitable for universal use with different cross-sections, materials, and frequent miter cuts.
The machine control complies with CE standard 89/289.
Technical Data:
Cutting capacity in mm round/flat
Ijdpfx Ast D Azcja Nsht
90°: 325/500 x 300
45°: 300/300 x 300
30°: 200/200 x 200
45°: 300/300 x 300
Rapid lowering of the saw frame to the material edge via push button
Manual miter adjustment from 45°–90°–30°, continuously adjustable via scale
The miter pivot point is the intersection between the saw band and the fixed clamping jaw, which ensures no change in length measurement when changing angles
Hydraulic full-stroke workpiece clamping – CETOP hydraulic system
At any frame angle, material is clamped parallel at 90°
Complete coolant system with electric submersible pump
Centralized machine operation
Saw band drive with limit switch
Movable band guide arm, adjustable to material width
Saw band deflection rolls with carbide guides
Integrated chip removal brush
Saw band tensioning with torque wrench
Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031)
Minimum remnant piece length: 60mm
Cutting speed:
AC frequency-controlled drive 15–150 m/min, steplessly adjustable on operator panel
Drives:
Saw band: 3.0kW; 400V, 50Hz
Hydraulics: 1.1kW
Coolant pump: 0.1kW
Saw frame feed:
Stepless up to 300mm/min, hydraulically controlled
Saw band tensioning: Mechanical, with torque wrench
Saw band dimensions: 4200x34x1.1mm
Working height: 750mm (without mounting elements)
Weight: 850kg
Dimensions (LxWxH): 1450x2350x1350mm
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA335DG
Hubungi
Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
2-column guided bandsaw, semi-automatic version with stepless miter adjustment on both sides: 30° - 45° - 90° - 135°
With patented miter system (ERP No. 0491120)
Particularly suitable for universal application with varying cross-sections, materials, and frequently changing miter cuts.
The rotation center remains unchanged at every angle setting, ensuring precise length measurement at 90° as well as in the miter range.
MEBA Eco Saw Innovation 2000
The universally applicable miter bandsaw MEBA 335 DG is ergonomically optimized and offers an excellent price-performance ratio.
Simple, central operation. The machine control complies with CE standard 89/289.
Technical Data:
Cutting Capacity:
Round/Flat
90° 335/500x335 mm
45° right 330/305x335 mm
30° right 180/170x335 mm
45° left 305/305x335 mm
Cutting speed:
AC frequency-controlled drive, 15-150 m/min, infinitely adjustable via control panel
Drive
- Saw band: 3 kW; 400 V, 50 Hz
- Hydraulic: 0.55 kW
- Coolant pump: 0.11 kW
Saw frame feed:
Infinitely adjustable up to 300 mm/min, hydraulically controlled
Saw blade tension: Mechanical with torque wrench
Saw blade dimensions: 4400 x 34 x 1.1 mm
Working height: 750 mm (without installation elements)
Weight: 1320 kg
Bfpzm8E9K3
Dimensions (LxWxH): 1450 x 2350 x 1900 mm
Technical specifications subject to change.
Standard equipment MEBA 335 DG-500
Semi-automatic sawing cycle with clamping – sawing – raising to preset height after cut is finished
MEBA High Performance Package:
Stepless hydraulic monitoring of cutting pressure and feed rate at the blade back. This provides optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles.
Manual miter adjustment, digital display with 0.1° accuracy
Rapid traverse lowering of the saw frame to the material edge via push button
Patented double miter system (ERP No. 0491120)
Ihjdpfxst Dpw Re Aa Net
Unique double miter bandsaw, with easy and efficient miter adjustments on both sides simply by swiveling the saw frame and material support.
Automatic positioning of the vices and digital miter adjustment. The material clamping vice automatically moves in the flow direction according to the desired miter, so the material is always clamped square and close to the saw blade.
The miter rotation point is at the intersection of the saw blade and fixed clamping jaw, ensuring the length dimension remains unchanged with varying angle settings.
Hydraulic full-stroke workpiece clamping. Quick material clamping. With every saw frame angle position, the material is clamped parallel at 90°.
Sturdy two-column, linear-guided saw frame
Saw blade tilted 3° towards the material support surface
Central machine operation
Saw frame throat height adjustment
Movable band guide arm, adjustable to material width
Saw blade guide rollers, carbide-guided
Traveling chip removal brush
Saw blade tension with torque wrench
Operation manual and spare parts list
CETOP hydraulic system
Coolant system (approx. 100 ltr.).
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA320 G HSS
Hubungi
Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Semi-automatic sawing cycle with workpiece clamping-sawing-frame lift to preset height after completed cut.
Continuously adjustable hydraulic cut pressure and feed rate monitoring at the saw band guide, providing optimal conditions for every sawing task—i.e., constant pressure for solid materials and constant feed for thin-walled profiles.
Particularly suited for universal use with varying cross-sections, materials, and frequent mitre cuts.
The machine control complies with CE standard 89/289.
Technical data:
(round/flat)
90°: 325 mm / 500 x 300 mm
45°: 300 mm / 300 x 300 mm
30°: 200 mm / 200 x 200 mm
Rapid lowering of the saw frame by push button until edge of material.
Manual mitre adjustment from 90° to 30°, infinitely variable via scale.
The mitre pivot point is the intersection of the saw band and the fixed vise jaw, so there is no change in cut length when changing angles.
Hydraulic full-stroke workpiece clamping – CETOP hydraulic system.
At any saw frame angle, the material is clamped parallel at 90°.
Complete coolant system with electric immersion pump.
Centralized machine operation.
Saw band drive with automatic shut-off.
Movable band guide arm, adjustable to material width.
Saw band guide rollers with carbide guides.
Chip removal brush driven.
Saw band tensioning with torque wrench.
Paint finish: silver-grey / blue-grey (RAL 7001 / RAL 7031).
Remnant piece length: 25 mm.
Cutting speed:
AC frequency-controlled drive 15-150 m/min, infinitely variable at the control panel.
Drive:
Saw band 3.0 kW; 400V, 50Hz
Hydraulics 1.1 kW
Coolant pump 0.1 kW
Ihedpfxshppabo Aa Njt
Saw frame feed:
Infinitely variable up to 300 mm/min, hydraulically controlled
Saw band tension: mechanical with torque wrench
Saw band dimensions: 4200 x 34 x 1.1 mm
Working height: 750 mm (without install elements)
Weight: 850 kg
Dimensions (LxWxH): 1300 x 2050 x 1400 mm
The following options are available:
Laser line
Micro-spraying device
Clamping pressure regulator
Support table on infeed side
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBAswing 260DG HS
Hubungi
Kondisi: baru, Tersedia dari stok!
Setara dengan Behringer, Kaltenbach, Kasto, Jaespa, dll.
Bandsaw semi-otomatis dengan pengaturan sudut kemiringan dua sisi dari 90° hingga 30° dapat diatur tanpa batas dengan akurasi 0,5° sesuai skala.
Termasuk opsi perangkat penyemprotan mikro!
Pengangkatan/penurunan bingkai gergaji secara hidrolik
Proses pemotongan semi-otomatis
Penjepitan material hidrolik / silinder stroke pendek
Gerakan turun cepat hingga permukaan atas material
30° kiri Ø 130 atau 120x120
45° kiri Ø 200 atau 180x180
90° Ø 260 atau 300x260
45° kanan Ø 200 atau 180x180
30° kanan Ø 130 atau 120x120
Sisa panjang potongan 25mm
Ihedpowcwggsfx Aa Not
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA260 AP
Hubungi
Kondisi: baru, Setara dengan Behringer, Kaltenbach, Kasto, Jaespa, dll.
Area pemotongan 90°
bulat 260 mm
datar 300x260 mm
diameter terkecil 5 mm
Pemasukan material otomatis yang dikendalikan NC dengan penguncian material penuh hidraulik
Pengoperasian mudah melalui kontrol NC dengan tampilan teks jelas
Fungsi penyetelan material tanpa penjepitan ulang untuk potongan pendek
Ihodpfx Ash Tnd Aoa Njt
Penjepit dorong material yang stabil dengan panduan linear dan posisi servo untuk akurasi tinggi
Penyesuaian otomatis panduan pita sesuai lebar material
Opsi yang direkomendasikan:
sikat serpihan bermotor, disinkronkan dengan kecepatan pita
panel kontrol terpisah
Panel CE 7", dapat tersambung ke jaringan, penyimpanan hingga 1000 data, penyimpanan histori untuk berbagai fungsi dan data, dll.
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA335 GA
Hubungi
Kondisi: baru, metal-bandsaw-description
Iedpoh S Nxzsfx Aa Njht
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA405 DG
Hubungi
Kondisi: baru, Setara dengan Behringer, Kaltenbach, Kasto, Jaespa, dll.
Sistem pemotong sudut berpaten
Kecepatan pemotongan dapat diatur tanpa langkah
Kontrol umpan hidrolik
Pengangkatan dan penurunan rangka gergaji secara hidrolik
Penjepitan material secara hidrolik
Penggerak pita gergaji bertenaga tinggi dengan kontrol frekuensi
Rentang putar 30° kanan / 45° kiri
Rentang pemotongan dalam mm
45° kiri bulat 300, datar 300 x 300
90° bulat 410, datar 620 x 410
45° kanan bulat 360, datar 420 x 360
30° kanan bulat 300, datar 300 x 300
Sisa panjang potongan tanpa penjepitan bundel 60mm
Opsi yang direkomendasikan:
Isdpfx Aajh S Nxpj Njht
Perangkat penyemprotan mikro
Lampu laser
Regulator tekanan penjepit
Sikat serpihan penggerak
Rol pengangkat manual
Elemen pemasangan
Iklan kecil
Dinkelsbühl
11.070 km
Gergaji pita
MEBA335 DGA 1000
Hubungi
Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Automatic material feed
Double-sided mitre cutting
Compact design
Precise material positioning via servo positioning technology
Advanced electric saw feed with ball screw spindle:
maximum cutting performance and quality while protecting the saw blade
Ihedpfjh S Nxdox Aa Nst
Unique and patented double mitring system:
Material is always clamped at a right angle
Cutting range in mm
90°: round 335, flat 500 x 335
45° right: round 330, flat 320 x 335
45° left: round 305, flat 305 x 335
30° right: round 180, flat 170 x 335
Minimum remnant piece length without bundle clamping:
Manual: 80 mm
Automatic: 300 mm
Automatic monitoring of cutting pressure and feed
Frequency-controlled AC drive 15-150 m/min
Hydraulic full-stroke material clamping
Automatic movement of the clamping jaws
Minimum speed and saw blade monitoring
Electric mitre adjustment via servomotor
Visualised program input with CNC control
Material feed via servo-controlled ball screw drive
The following options are recommended:
Micro-spray device
Clamping pressure regulator
Mounting elements
Klik keluar
Gersthofen
11.045 km
CNC-ganda pemotong mitra
MEBA335 DGA‑2300
Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: belum diuji, 2910001
Ihodpfjx N Nglsx Aa Nst
Iklan kecil
Niederlangen
11.198 km
Gergaji pita
MEBA - VOLLAUTOMATMEBAmat 330
Hubungi
Kondisi: bekas, Tahun pembuatan: 2022, Schnittdurchmesser 330 mm
Sägebandlänge 4900 x 34 x 1,1 mm
Tischhöhe 750 mm
Schnittbereich bei 90 Grad: flach 350 x 330 mm
Schnittgeschwindigkeit 15 - 150 m/min
Werkstückgewicht max. 670 kg/m kg
Gesamtleistungsbedarf 3,9 kW
Maschinengewicht ca. 2600 kg
Ihodpfxex E Dpts Aa Njt
Raumbedarf ca. 1700 x 2400 x 2200 mm
*Sonderausstattung:
- Schnecken-Späneförderer
- Nullanschlag
- Materialdatenbank
- Spanndruckregulierung
- Bedienpult schwenkbar
- Jobmenü
- Mehrstangen - Spanneinrichtung
- Schnittverlaufskontrolle
- Mikrodosieranlage
- LED Arbeitsleuchte
- Arbeitstisch abfuhrseitig
- Wassersprühpistole
- Kühlmittel-Füllstands- und Durchflussüberwachung
- Beidseitiges Öffnen / verkürztes Reststück
- Materialüberwachung
- Laserleuchte für Schnittlinienanzeige/ Anrißsägen
- Vertikalrolle
Iklan kecil
Kalina Wielka
10.353 km
Mesin gergaji pita
MEBAMebamat 330
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, pl-hu-1
Iedex H Rynepfx Aa Noht
Iklan kecil
Kalina Wielka
10.353 km
Gergaji pita
MEBAMebaEco 410DGA
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Technical data:
• Cutting diameter: 410 mm
• Saw blade dimensions: 5800 x 41 x 1.3 mm
• Feed range: from 5 to 2300 mm per stroke
• Cutting area at 90°: flat materials 700 mm x 410 mm
• Cutting range at 45°: approx. 410 mm
• Cutting area at 45°: flat materials 500 x 410 mm
• Round cutting at 45° (left side): 305 mm
• Cutting area at 45° (left side): flat 430 x 410 mm
• Maximum cutting range at 30°: approx. 320 mm
• Cutting area at 30°: flat 320 x 410 mm
• Cutting speed: infinitely variable from 15 to 150 m/min
• Maximum material load: 250 kg/m
• Total installed power: 5.5 kW
• Machine weight: approx. 3,450 kg
Standard equipment MEBAeco 410 DGA-2300:
• CE-compliant access protection with light barrier.
• Robust double-column linear band saw design by MEBA with automatic material feed system (range 5–2300 mm per stroke).
• CNC control enabling easy program input and visualization.
• Automatic mitre cutting at any angle from 30° to 135°, with adjustable length and quantity of pieces.
• Capability to create and manage up to 255 cutting programs.
• Intuitive data input reduces the risk of operator errors.
• Blade breakage monitoring sensor
• Hydraulic blade tensioning
• Band cleaning brush with separate motor
• Cutting line laser
• Micro-sprayer, blade cooling with oil
MEBA High-Performance Package:
• Saw feed via servo drive and ballscrew with automatic monitoring of cutting and feed pressure.
• Constant, optimized operating conditions when cutting various materials, including thin-walled profiles.
• Accurate and fast material positioning via AC rack-and-pinion drive with a stroke length up to 2300 mm and integrated powered roller conveyor up to 3000 mm long.
• Jaw clamping system that opens on both sides, with support rods for transporting heavier materials.
Construction and functionality:
• Solid saw frame made of welded, vibration-resistant steel.
• The saw blade set at a 3° angle to the table for higher efficiency and blade life when cutting steel profiles.
• Combined saw blade guides with high-precision bearings minimizing blade deflection.
• Carbide sliding guides for maximum cutting precision.
• Zero point (mitre rotation): at the intersection of the blade with the movable clamping jaw—no length correction needed when changing angles.
• Automatic angle programming via the control panel.
Vice system:
• Patented double-vice mitre system with automatic position adjustment according to cutting angle, ensuring secure and precise clamping close to the cutting line.
• Clamping with full-stroke cylinders.
Additional features:
• Automatic saw frame descent in front of the material at the start of the cut, minimizing cycle times.
• Optimal conditions for both single and serial cutting.
Ihodpfjx Hyclsx Aa Not
• Infinitely variable band saw drive via frequency inverter (15–150 m/min).
• Precisely pre-machined elements eliminate play.
Iklan kecil
Essen
11.253 km
Gergaji pita/gergaji gergaji ganda/mesin otomatis penuh
MEBAECO 320 DGA
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.680 mm, lebar total: 2.350 mm, tinggi total: 1.350 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 1.800 kg, Rentang pemotongan baja bulat pada 45°: 300 mm, Rentang pemotongan baja bulat pada 90°: 325 mm, panjang mata gergaji pita: 4.400 mm, lebar pita gergaji: 34 mm, tinggi kerja: 750 mm, kecepatan pemotongan: 150 mm/menit, jenis penyesuaian ketinggian: hidrolik, Technical Data:
Bundle Clamping Range:
Width: 0 – 300 mm
Height: 5 – 300 mm
Material Infeed: Single: 0 – 600 mm
Multiple: 0 – 9999 mm
Remaining Piece Length: Manual: approx. 70 mm
Automatic: approx. 300 mm
Cutting Speed: 15 to 150 m/min – AC Drive
Cutting Pressure: continuously adjustable, hydraulic
Downfeed Rate: 0 to 300 mm/min – infinitely variable
Saw Blade Dimensions: 4400 x 34 x 1.1 mm
Saw Blade Tensioning: with torque wrench
Machine Weight: approx. 1800 kg (net)
Machine Dimensions: Length x Width x Height approx. 2680 x 2350 x 1350 mm
Max. Support Weight: Material weight max. 250 kg/m
Working Height: 750 mm
With base elements approx. 800 mm (option)
Iedpfx Aeq Atyzoa Njht
Noise Emission: 74 dB(A)
Measured at the operator’s workstation
Including both depicted roller conveyors.
Iklan kecil
Weilheim an der Teck
11.136 km
Bandsaw logam otomatis
MEBAMEBARATIO 210 A
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 4.100 mm, lebar pita gergaji: 27 mm, tinggi total: 1.700 mm, panjang total: 2.400 mm, lebar total: 2.300 mm, kecepatan pemotongan: 75 mm/menit, panjang pemotongan (maks.): 400 mm, berat kosong: 1.500 kg, DATA TEKNIS & PERLENGKAPAN:
Penggerak pita gergaji: 2,2 kW
Unit hidrolik: 0,37 kW
Pompa pendingin: 0,12 kW
Kebutuhan daya total: min. 2,7 kW
Kecepatan potong: hingga 75 m/menit
Gerak maju gergaji: hidrolik
Kecepatan turun: 0–250 mm/menit
Dimensi pita gergaji: 4100 x 27 x 0,9 mm
Berat material maksimal: 250 kg
Iedew U Tt Eepfx Aa Nsht
Panjang potong: sekitar 400 mm
NOMOR REFERENSI 17
UKURAN & BERAT:
2400 x 2300 x 1700 mm
1500 kg
CATATAN PENGAMBILAN:
Barang tersedia mulai September 2025. Jadwal pengambilan harus disepakati pada tanggal tertentu mulai 01.09.2025
FCA: 73235 Weilheim an der Teck (DE), dimuat ke truk.
Iklan kecil
Poznań
10.564 km
Tangki pencelupan
MEBA
Hubungi
Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tangki celup bekas untuk perawatan kayu setelah renovasi menyeluruh. Ukuran: 6,5 m x 1,35 m x 1,5 m tinggi, platform 6 m. Pengendalian otomatis.
Ihedpsx Azqaofx Aa Nst
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Rödermark
11.160 km
Dua tiang gergaji pita otomatis potong sudut
MEBA
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 60115, Offer 25422
Hydraulic Two-Column Guided Mitre Band Saw Automatic
Ihsdsx Aqxaepfx Aa Not
Technical Data:
- Automatic cutting cycle, hydraulic lifting / lowering of the saw frame
- Manual mitre adjustment with hydraulic clamping
- Automatic material feed unit, motorised mitre adjustment
- Saw band dimensions: 4400 x 34 x 1.1 mm
- Cutting speed, stepless adjustable: 15 – 150 m/min
- Cutting pressure regulation, stepless: 10 – 15 bar
- Downfeed speed: 0 – 300 m/min
- Cutting range: 30° – 90°
- at 90° round: 335 mm
- at 90° square/flat: 500 x 335 mm
- at 45° round: 330 mm
- at 45° square/standing: 320 x 335 mm
- at 30° square/standing: 170 x 335 mm
- Automatic material feed
- Discharge roller conveyor: 4000 mm
- Infeed roller conveyor: 4000 mm
- Drive: 400 V / 6.5 kW
- Required space (approx.): W 2300 x H 1750 x D 2200 mm
- Weight (approx.): 1800 kg
Iklan kecil
Root
11.253 km
Band saw
MEBA
Hubungi
Kondisi: baik (bekas), Kondisi kerja baik.
Ihodpjxvnh Sjfx Aa Net
Iklan kecil
Oslo
10.818 km
Band saw
MEBA407A-OV
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 5.120 mm, tinggi total: 2.000 mm, panjang total: 1.400 mm, lebar total: 2.500 mm, kecepatan pemotongan: 300 mm/menit, Rentang pemotongan baja bulat pada 90°: 407 mm, lebar pemotongan (maks.): 407 mm, tegangan masuk: 230 V, daya: 5,5 kW (7,48 hp), panjang bilah gergaji: 5.120 mm, berat kosong: 3.500 kg, MEBA 407A-OV CNC gergaji pita horisontal
Lintasan pengumpan
Tahun pembuatan: 2005
Kontrol Siemens
Konveyor serpihan
Daya: 5,5 kW
Berat: 3,5 t
Dimensi (P x L x T): 1,4 x 2,5 x 2 m
Panjang pita gergaji: 5120 mm
Kecepatan pemotongan: 15 - 150 m/menit
Tinggi penggenggam: 10 - 407 mm
Lebar penggenggam: 10 - 407 mm
Rentang pemotongan: 407 x 407 mm
Rentang pemotongan bulat: 407 mm
Ihedpfx Aoxz Dkyja Njt
Kecepatan turun tak bertingkat: 0 - 300 mm/menit.
Iklan kecil
Reichenbach am Heuberg
11.198 km
Gergaji pita
MEBA230 GHA
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1995, 1 x Bandsaw Otomatis
Meba
230 GAH
Tahun pembuatan: 1996
dengan meja rol
Data teknis:
Mode manual: Kapasitas pemotongan: Material bulat 220 mm, material datar: 300 x 150 mm
pada 90°
Mode manual: Kapasitas pemotongan: Material bulat 200 mm, material datar: 200 x 200 mm
pada 45°
Mode manual: Kapasitas pemotongan: Material bulat 120 mm, material datar: 120 x 120 mm
pada 60°
Mode otomatis: Kapasitas pemotongan: Material bulat 220 mm, material datar: 250 x 220 mm
pada 90°
Mode otomatis: Kapasitas pemotongan: Material bulat 200 mm, material datar: 200 x 200 mm
pada 45°
Kecepatan potong: 28 + 56 m/menit
Isdpsxy Si Iefx Aa Njht
Pengumpanan material: 1 - 500 mm
Gergaji dapat didemonstrasikan dalam kondisi hidup.
Kami memudahkan pencarian untuk Anda: "meba"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Meba (37)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan














































































































































