Beli Biesse Akron bekas (328)

Tahun pembuatan: 1999, Kondisi: baik (bekas), Edge Bander Biesse Polymac ERGHO 5, year of manufacture 1999 Biesse Italy S/N 80709 Max. panel thickness: 10–45 mm Min. and max. edge band thickness: 13–60 mm Max. thickness of edging material (roll): 0.4–3 mm Min. panel width: 50 mm Min. panel length: 150 mm Feed speed: 10/20 m/min Technical specifications: - Glue pot VC 700 - End trimming unit 701 - Edge trimming unit RS 700 - Corner rounding unit CR 200 - Tilting trimming unit + chamfering RI 700 - Compact scraper RBK501 - Buffing unit SP700 - Edge sanding unit LV 700 Iisdpfxsgtx Aqs Adqeh Features: - Heated infeed guide - PLC control - Panel support guide - Large-diameter roller holder - Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: AGG0062 - Kode Pabrikan: 6314A0111 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin yang kompatibel: CNC BIESSE ROVER 23/24/27/30/346 - Jika berminat kami menawarkan layanan overhaul, silakan hubungi kami. Berat dan dimensi untuk pengiriman: 2,5 kg, 20x20x20 cm Iiodpfx Adovu Auusqsh

Kondisi: sangat baik (bekas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveying belts No. 2 horizontal drilling supports No. 1 drilling unit per each horizontal drilling support Spindles per each horizontal drilling unit (qty.): 20 Max. working width (mm): 3200 Iiedpform Ik Tsx Adqjh Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units per each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal belts Total connected load (kW): The CNC control system regulates the movement (X-axis) of the horizontal drilling supports The CNC control system regulates the movement (Y-axis) of the stops The CNC system controls the movement (X-axis) of the conveyor belts

Kondisi: bekas, Tahun pembuatan: 1992, Used machine Year of manufacture: 1992 Working range: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable feed rate: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: Diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: Diameter 120 mm Drilling spindles: Isdpjwwnf Njfx Adqeih 4 horizontal spindles in X, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum pump capacity: 40 m³/h CNC: Monitor: Monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 19.200 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 2.500 mm, panjang umpan sumbu Z: 40 mm, Perlengkapan: ABS, de001 Iijdpfoxb Dk Hsx Adqoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Biesse Techno Kernell ini diproduksi pada tahun 2010. Ini adalah lini bor multi-spindle bekas dengan sistem penumpukan, dilengkapi unit pemasukan dan penumpukan otomatis dari Wamhoff. Ideal untuk operasi pengeboran volume tinggi yang efisien, mesin ini memiliki beberapa dudukan pengeboran dari atas dan bawah. Jika Anda mencari kemampuan pengeboran berkualitas tinggi, pertimbangkan mesin Biesse Techno Kernell yang kami tawarkan – hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Iodpfx Asw Nb Nwodqeih Pemboran & Peneboran (Kayu)

Kondisi: bekas, Numerical control XP 600 with Biesse Works software Working area X-axis: 3000 mm Working area Y-axis: 1000 mm Working area Z-axis: 60 mm Automatic loading system with motorized belt conveyor No. 2 clamps for blocking and transporting the panel No. 1+1 vertical electrospindle, 3 axes (bottom + top) Iiedpfx Adsuickyeqjh No. 1+1 independent saw blade (bottom + top) No. 29 + 29 independent spindles for vertical drilling in X and Y directions (top + bottom) No. 10 + 10 independent spindles for horizontal drilling in X and Y directions (top + bottom) Automatic unloading system with motorized belt conveyor

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: AGG0056 - Kondisi: Bekas - Fungsionalitas: Berfungsi penuh - Mesin Kompatibel: CNC BIESSE ROVER - Jika berminat kami menyediakan layanan perbaikan, silakan hubungi kami. Berat dan dimensi untuk pengiriman: 4 kg, 36x26x21 cm Isdpfxovu Aqis Adqeih

Kondisi: bekas, Tahun pembuatan: 2020, CNC control with Sintra software Panel height: 60 mm Solid wood: 8 mm PVC/ABS: 0.4–3 mm Feed speed: 12 m/min Adjustable infeed guide Side roller conveyor with return rollers for panel support Precision unit Roller holder plate Gluing unit for EVA hot-melt adhesive and glue pot End trimming unit with 2 motors Chamfering unit with 2 tilting motors Multifunctional corner/rounding unit with 2 motors (corner/corner-rounding unit) Scraper unit Iiedpfx Aew Ew Ddedqjh Buffing unit TECHNICAL DATA TO BE VERIFIED

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: AGG0049 - Kode Produsen: 6314A0354 - Kondisi: Bekas - Fungsionalitas: Berfungsi sepenuhnya - Mesin Kompatibel: CNC BIESSE ROVER - Jika berminat kami menawarkan layanan pemeriksaan ulang, hubungi kami. Berat dan dimensi untuk pengiriman: 9KG, 46X39X27 CM. Iiedpfx Asvu Amwjdqoh

Kondisi: bekas, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first or second machine in a sizing and edge banding line Numerical control with Sintra software Machine suitable for first and second panel pass Motorized mobile side opening by CNC, 3000 mm Panel height 60 mm PVC/ABS up to 3 mm Iedpfxsu Rim He Adqoih Continuously variable feed speed by CNC (up to 40 m/min) Electronically adjustable working height by CNC (up to 60 mm) Mobile side opening electronically adjustable by CNC Motorized pressure belt with increased contact pressure Support rail with concealed pins – distance between pins 500 mm Automatic large panel support system Anti-adhesive unit Squaring/edging section for each side including: * Automatically timed anti-chipping unit * Double pre-milling unit * Dual-motor scoring unit Edgebanding section for each side comprising: * Gluing unit for EVA hot-melt glue with pre-melter * Edge pressing unit for straight profiles with electronically adjustable pressure rollers by CNC * 6-position coil magazine with automatic edge selection by CNC * Trimming unit with 2 motors with automatic tilt * Overlapping trimming unit with 2 motors * Corner rounding unit with 2 electronically adjustable tilting motors by CNC * Multifunction rounding unit with 4 motors (cutter + corner rounding) with CNC automatic control * Milling unit (with 2 motors on fixed left side / with 1 motor with 0–90° tilt on movable right side) * Edge scraper unit electronically controlled by CNC * Glue scraper unit * Oscillating brush unit * Hot air dryer unit

Kondisi: bekas, Tahun pembuatan: 2017, Numerical control system with B-Solid software – 3D CAD-CAM program for designing, simulating, and managing processes Processing for machining centers and boring machines from Biesse BNest software – software module for processing in nesting mode, allowing you to create projects Includes a list of parts with the quantities to be produced and a list of panels to be used, aiming to minimize material usage and processing times Working area X-axis: 4300 mm Working area Y-axis: 2200 mm Number of working zones: 2 Iodpfx Aot Ul Dnjdqeih Nesting worktable Automatic loading system with side-lift table Panel separation system with 2 suction cups 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool change, HSK taper type Automatic tool changer with 16 positions – positioned at the rear of the machine Boring head BH 10 with 10 spindles arranged as follows: - 5 vertical spindles on X-axis - 5 vertical spindles on Y-axis Automatic unloading system with motorized conveyor belt Work table cleaning system Label printing and application system with labelling machine, 22" monitor, keyboard and mouse, and dedicated PC Safety and protection system with perimeter fencing Safety system with bumper Automatic lubrication system Air conditioning unit for cooling and cleaning the machine control cabinet 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Kondisi: bekas, Tahun pembuatan: 2019, Numerical smart-touch control with Sintra HD software Panel height: 10 - 60 mm 22 mm solid wood PVC / ABS mm 3 Feed speed up to 25 meters/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Side roller conveyor with wheels for panel support ADZ-700 anti-stick unit Rectifier unit with 2 electronically controlled motors via CNC FI-502 Lamps for heating the panel edge AdIRL-700 Roll holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressure group for straight profiles with electronically adjustable pressure rollers via CNC Iiodpfx Asr Ip Sdsdqoh Anti-stick unit End trimming unit with 2 motors IN-801 Flush trimming/post-processing unit with 2 motors electronically adjustable via CNC RF400 PRO-NESTING KIT for post-processing unit Anti-stick unit Corner rounding unit with 2 multifunction motors (radius + rounding) AR30 NC LPT-700 anti-stick liquid application system Electronic edge scraper, electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper RCC-701 glue scraper unit Brush unit "SP-501" Telephone group "PH-700"

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: Iedpekvrxusfx Adqsih * Type: KR210-2 * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening via C.N., 1500 mm Panel height: 60 mm PVC/ABS: 3 mm Infinitely variable feed speed Electronically adjustable working height via C.N. Motorized, rubber-coated belt with superior pressure Squaring unit consisting of (per side): * Double trimming unit * Automatic, timer-controlled anti-splintering group Edgebanding unit consisting of (per side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Edgeband pressing unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge changeover Iisdpjrxzb Uefx Adqjh * Overlapping trimming unit with 2 motors * Pick-off unit with 2 tilting motors * Profile scraping unit tiltable from 0–90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit

Kondisi: bekas, Tahun pembuatan: 2015, NC 1000 numerical control, Biesse Works Advanced software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Z-axis working stroke: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lift table Automatic labeling unit for barcode printing Automatic print-and-apply system for adhesive labels No. 1 vertical electrospindle preset for 4-axis machining (C-axis vector), with automatic tool change, HSK F63, 12 kW, including flange for aggregate use Knife unit integrated in the drilling head on X-axis – diameter 120 mm Automatic tool changer with 8 positions – mounted on the machine operating head Automatic tool changer with 21 positions – positioned at the rear of the machine with chain Drilling unit BH 40 L with independent spindles arranged as follows: - No. 17 vertical in X-axis - No. 12 vertical in Y-axis Iedpewt Snyjfx Adqsih - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Automatic unloading system with motorized belt Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning unit for the electrical cabinet No. 2 vacuum pumps, each 250 m³/h

Kondisi: bekas, Tahun pembuatan: 2013, Touch panel operation, panel thickness 60 mm, solid wood 15 mm, PVC/ABS 3 mm, variable feed speed, working height electronically adjustable via CNC, adjustable panel support guide, side roller conveyor with return rollers for panel support, anti-adhesive unit, 2-motor rectifier unit, lamps for panel edge heating, roller holder plate, gluing unit for EVA hot-melt adhesive, gluing unit with AFS (Air Force System), edge pressure unit for straight profiles with adjustable pressure rollers, trimming unit with 2 motors, chamfering unit with 2 swivel motors, multifunctional 2-motor rounding unit (corner rounding + rounding), edge scraper, glue scraper, brushing unit. Iedpfjwwkyiex Adqjih

Kondisi: bekas, Tahun pembuatan: 2017, Osi Plus numerical control, QUICK OPTI software for pattern optimization directly at the machine, OPTIPLANNING cutting optimization software PROFESSIONAL version, barcode label printer – OS-Labelling add-on key for office programming software, control cabinet air conditioner. Cutting length: 4,400 mm, cutting width: 4,300 mm, blade projection: 90 mm. Manual loading of the front panel. Integrated lateral aligner in the blade carriage. No. 1 fixed front Bakelite table with air cushion system for unloading panels (2,050 x 850 mm), no. 3 adjustable front Bakelite tables with air cushion system for unloading panels (2,050 x 650 mm). Main saw unit (max. blade diameter / power): 355 mm / 11 kW. Scoring unit (max. blade diameter / power): 200 mm / 2.2 kW. Adjustable saw carriage speed. Sliding carriage with 9 clamps. Saw carriage speed: 120 m/min. Twin Pusher 1.2 system with 1 additional clamp on the pusher carriage (position 570 mm) for simultaneous cutting of different patterns. TECHNICAL DETAILS MUST BE VERIFIED. Iodsvtbzkepfx Adqoih

Kondisi: bekas, Tahun pembuatan: 2022, Smart-touch numerical control with Sintra HD software. Panel height (mm): 10 - 60 solid material, 22 mm. PVC/ABS (mm): 3. Feed speed up to 25 m/min. Electronically adjustable working height via CNC. Motorized pressure belt with increased pressure. Motorized and electronically adjustable panel infeed guide via CNC. Air cushion table for panel infeed. Side roller conveyor with free-running rollers for panel support. Anti-adhesive unit. Rectifier unit with 2 electronically controlled motors via CNC. AdIRL-700 heating lamps for panel edges. Roller tray with single positioning. Glue application unit for EVA hot-melt adhesive with glue pot and pre-melter. Pressure station for edging on straight profiles with electronically adjustable pressure rollers via CNC. End trimming unit with 2 IT 70 P motors. Overlapping trimming unit with 2 motors. Offset edge milling unit with 2 motors, electronically adjustable via CNC. Anti-adhesive group. Corner rounding unit with 2 multifunction motors (corner tool + rounding tool). Anti-adhesive liquid application system. Electronically adjustable scraper blade group, adjustable via NC. Glue scraper group. 0-90° tilting router unit. Brush unit. Total weight: 3800 kg. Total installed power: 27 kW. TECHNICAL DETAILS TO BE VERIFIED. Iisdpfow Eawtjx Adqeh

Kondisi: bekas, Tahun pembuatan: 2009, Biesse factory control system Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Stroke on the Z-axis: 350 mm 2 working zones Bar worktable 8 adjustable support bars 4 pneumatic Bakelite support bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal for securing the panel during processing 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK-type cone Iiedpfx Ajw D Dhajdqoh 10-position rotary tool change system on the working head 24-position chain tool change system—located at the rear of the machine Drilling head with vertical and horizontal spindles composed as follows: - 12 vertical spindles in the X direction - 12 vertical spindles in the Y direction - 6 horizontal spindles in the X direction - 4 horizontal spindles in the Y direction 1 independent saw blade for producing X-grooves Carpeted front protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control Sintra Panel height 60 mm Solid wood up to 20 mm PVC / ABS up to 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Powered pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Panel infeed table to facilitate alignment of entry panels Side roller track with running wheels for panel support Rectifier unit Coil holder magazine with 2 positions, automatic edge-change via CNC Iisdpfxjh Uhxno Adqsh Gluing unit for EVA hot-melt adhesive with premelter and glue pot Prepared for PUR glue adhesive unit Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End-trimming unit with 2 motors and automatic tilt adjustment Flush trimming unit with 2 vertically stacked motors Corner rounding unit with 2 tilting motors Multi-functional 4-motor corner rounding unit (trimmer + rounder) with CNC control, automatic Anti-adhesive unit Adjustable edge scraping unit Glue scraper unit Oscillating brush unit

Kondisi: bekas, Numerical control XNC Working area on X-axis: 3400 mm Working area on Y-axis: 1300 mm Stroke on Z-axis: 155 mm Number of work zones: 2 Bar worktable 8 manually adjustable bars with display for indicating working height Iedpfx Adev Edggjqoih 8 pneumatic Bakelite bars for lifting the panel 3 manually adjustable suction cups per bar, with vacuum seal for panel fixation during machining 1 vertical electrospindle with C-axis Vector, automatic tool changer, ISO 30 taper, flange for use with aggregates Automatic tool changer with 3 positions for laterally mounted aggregates Automatic tool changer with 20 positions and chain Drilling head with spindles arranged as follows: - 10 vertical spindles on X-axis - 12 vertical spindles on Y-axis - 6 horizontal spindles on X-axis - 2 horizontal spindles on Y-axis Front safety carpet and safety system Perimeter safety fence Motorized carpet for chip extraction Vacuum pump

Kondisi: bekas, Numerical control NC 1000 Software Biesse Works Working area in X-axis: 3685 mm Working area in Y-axis: 1290 mm Working stroke in Z-axis: 200 mm – Workpiece passage: 70 mm FT nesting full-plane worktable Automatic loading system with side lift table No. 1 vertical electrospindle with automatic tool changer Automatic tool changing system with 18 positions, positioned at the rear of the machine Drilling head with independent spindles arranged as follows: – No. 7 vertical on the X-axis – No. 7 vertical on the Y-axis – No. 2 horizontal on the X-axis – No. 2 horizontal on the Y-axis Automatic unloading system with motorized belt Frontal protection and safety system featuring mats and perimeter nets Automatic lubrication system Air conditioning for control panel Vacuum pumps TECHNICAL DETAILS TO BE VERIFIED UPON ARRIVAL OF THE MACHINE Ijdpfx Aswufv Tjdqsih

Kondisi: bekas, Numerical control XP 600 with Biesse Works software Working area X-axis: 3000 mm Working area Y-axis: 1000 mm Working area Z-axis: 60 mm Automatic loading system with motorized belt conveyor No. 2 clamps for blocking and transporting the panel No. 1+1 vertical electrospindle, 3 axes (bottom + top) Iiodpjpp Thnsfx Adqeh No. 1+1 independent saw blade (bottom + top) No. 29 + 29 independent spindles for vertical drilling in X and Y directions (top + bottom) No. 10 + 10 independent spindles for horizontal drilling in X and Y directions (top + bottom) Automatic unloading system with motorized belt conveyor

Kondisi: bekas, Tahun pembuatan: 2017, Numerical control with B-Solid software X-axis working range: 3,600 mm Y-axis working range: 1,800 mm Number of working zones: 2 Stackable worktable Automatic loading system with side lift table Label printing system with automatic application on the loading table Panel separation system with suction cups Ijdpsqvt D Rofx Adqjih 1 three-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 cone type Automatic tool changer with 16 positions – mounted at the rear of the machine Automatic tool changer with 8 positions – on the machine Drilling unit BH 10 with 10 spindles arranged as follows: - 15 vertical spindles on the X-axis - 17 vertical spindles on the Y-axis Automatic unloading system with motorized conveyor belt Workpiece cleaning system Protective and safety system with perimeter fencing Safety system with bumper Automatic lubrication system Air conditioning unit for cooling and cleaning the machine control 250 m³/h vacuum pumps