Beli Bor Magnetik bekas (4.059)

Kondisi: baik (bekas), en-25017 Fgodpett Aiqofx Am Sjc

Kondisi: baik (bekas), Internal item no.: 24025 Boring Head Mount: HSK-A63 Manufacturer: Komet M03 Speed Boring range: D100 - 206 Division: 0.002 Attachment: Komet M03 / 20 100 Boring range with attachment: D100-130 Fgedpfstr Dgwjx Am Ssc Max. speed: 11,500 rpm Overall length: 300 mm

Kondisi: baik (bekas), Nomor artikel internal: 23045 Fodpslvrmtofx Am Sjgc Pelat Elektromagnetik Produsen: Assfalg 600x300x80 mm 110V Pada pelat terdapat lekukan dengan lebar sekitar 55 mm dan kedalaman 4 mm.

Kondisi: baik (bekas), Internal article no.: 24019 HSK-A63 Fgodpfxotr A Aaj Am Sjc Boring head / fine boring head Komet G01 72110 / 72110.11 D 50-70mm Graduation: 0.1mm Base holder HSK-A63 / Komet A06 30150 / 50-HSK-A63

Kondisi: baik (bekas), Internal item no.: 24023 Fodpfx Astr A E Ism Sjgc Boring head Mount: HSK-A63 x40x80 Attachment: 40x25x60 Attachment 25x60 Manufacturer: Kelch Boring diameter range: D30-40mm Graduation: 0.01mm

Kondisi: baik (bekas), Internal item no.: 24035 Column Drilling Machine Solid TB15 - 2 speed settings - Forward and reverse rotation - Spindle taper: MK2 - Quill stroke: 100mm (with adjustable depth stop) - Speed adjustable via belt - Speed levels not visible (presumably up to 4000 rpm) - Table size: 320 x 260mm Fgjdpett Ahpofx Am Sec Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300kg

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, penjepit spindle: MK 3, kedalaman tenggorokan: 297 mm, berat keseluruhan: 680 kg, No.: 4.1-551 1 unit mesin bor duduk bekas, produsen ALZMETALL, model AC 25, tahun 2002 Kepala bor dapat diatur tingginya, meja tetap, perangkat pendingin Data teknis: Kapasitas bor baja/besi cor: 25/30 mm Klep bor: MK 3 Kecepatan putar: 35-1400 rpm Langkah spindle: 120 mm Jarak spindle-ke-kolom: 297 mm Fodpfx Ajy Hik Som Sogc Tipe fitting alat: MK3 Berat mesin: 680 kg Data teknis, perlengkapan, dan deskripsi mesin tidak mengikat.

Kondisi: bekas, nomor mesin/kendaraan: 007870, max-breite-panel-3200-laenge-panel-800-an-aggregate-2-injektoren -12 Fjdpjwimz Hjfx Am Segc

Kondisi: bekas, nomor mesin/kendaraan: 007869, max-breite-des-paneels-3200-mm Fgedpfx Aewimzysm Sec

Kondisi: baik (bekas), Kode: 0405 Merek: VITAP - ITALIA Model: ALFA 21 Fgodpfeyrrhiox Am Ssc Mesin bor multi-spindle untuk furnitur, dapur, furnitur kustom, furnitur kamar mandi, dan berbagai keperluan lainnya Data teknis: Jumlah spindle: 21 - Jarak antar pusat mm 32 Kedalaman bor maksimum mm 80 Dimensi meja mm 860 x 500 Putaran spindle 2800 rpm Daya motor 2,5 Hp Kepala miring 0-90° Tekanan kerja 6-8 atm Dimensi keseluruhan mm 950 x 800 x 1140 h Berat kg 300

Kondisi: baik (bekas), Kode: 0365 Merek: LTF Model: SB 25 - Standar CE Mesin bor tiang untuk kayu, logam, dan berbagai material – Standar CE Spesifikasi teknis: Motor tiga fasa, 2,5 kW Pelindung keselamatan Kapasitas pengeboran hingga 25 mm Meja kerja dapat diatur ketinggiannya Dimensi meja 350 x 350 mm Fgjdpfx Ajy E Trksm Soc Tirus spindle 3 cm 9 tingkat kecepatan Kecepatan spindle 230 ÷ 1910 rpm Diameter kolom 92 mm Jarak meja/spindle 720 mm Jarak alas/spindle 1250 mm Jarak kolom/spindle 225 mm Dimensi keseluruhan 400 x 750 x 1800 mm (t) Berat 180 kg

Kondisi: baik (bekas), 0072 Fedpfx Amoyv Inzo Ssgc

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Bor Merek: GSP Tipe: 407C22 Fgjdpfxey D Hr Uo Am Ssc Jangkauan: 2250 mm Kapasitas pengeboran (baja): - Maju normal: diameter 70 mm - Maju lambat: diameter 90 mm Jarak gerak carriage pada lengan: 1900 mm Radius pengeboran (min. - maks.): 630 - 2500 mm Tinggi (min. - maks.): 500 - 1750 mm Gerak vertikal lengan: 850 mm Gerak spindle: 400 mm Kecepatan spindle: 25 hingga 1400 rpm Daya motor: 6 kW Kepala spindle: MT 5

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, da_01 Fgjdpfx Amezb El Hs Ssc

Kondisi: bekas, Mesin bor vertikal 4 spindle untuk benda kerja melengkung seperti sandaran kursi atau sejenisnya Fgedpfx Aozb A Rgsm Sec

Kondisi: bekas, Tahun pembuatan: 1976, nomor mesin/kendaraan: 5591, Drilling capacity in steel (diameter): 13 mm Throat depth: 185 mm Drilling stroke: 70 mm Spindle mounting: Drill chuck 1 - 13 mm Fgsdpjcxxvbjfx Am Soc Speed range: 400 - 4000 rpm Spindle speed steps: 6 Table size: 200 x 250 mm Distance spindle / table: 170 mm Column diameter: 65 mm Total power requirement: 0.22 kW Machine weight approx.: 0.08 t Space requirement approx.: 0.75 x 0.3 x 0.65 m Bench drilling machine with 6-step speed range (400 - 4000 rpm), table size 200 x 250 mm, mounted on sheet metal cabinet (h = 845 mm). The drilling machine features a drilling stroke of 70 mm, throat depth of 185 mm, and a drilling capacity of 13 mm. Machine is in good condition.

Kondisi: bekas, Drilling capacity in steel (diameter): 10 mm Throat depth: 190 mm Drilling stroke: 65 mm Total power requirement: 0.5 kW Machine weight approx.: 0.05 t Space requirement approx.: 0.3 x 0.7 x 0.7 m Fedoh Ra Nxopfx Am Sjgc Column diameter: 80 mm Machined base plate: Yes Table size: 300 x 250 mm Height adjustment: 0 - 280 mm Spindle speeds: 950 - 2000 rpm Older, very robust bench drill with T-slots in the machined base, drill chuck, and a clamping surface of 300 x 250 mm. Suitable for machining workpieces with a height of 1 mm to 260 mm as well as a drilling depth of 65 mm at a spindle throat depth of 190 mm. The condition is good, consistent with its age.

Kondisi: bekas, Drilling capacity in steel (diameter): 5 mm Fgodocxxmlopfx Am Sec Throat depth: 100 mm Drilling stroke: 30 mm Operating voltage: 220/380 V Speed: 2820 rpm Clamping table: 170 x 120 mm Maximum workpiece height: 120 mm Total power requirement: 200 W Machine weight approx.: 35 kg Space requirements approx.: 0.25 x 0.43 x 0.5 m Older, robust bench drill with T-slots in the machined base, drill chuck, and a clamping surface of 170 x 120 mm. Suitable for machining workpieces with a height of 1 mm to 120 mm and a drilling depth of 30 mm, featuring a swivel range of over 180 degrees and a spindle throat depth of 100 mm. The condition is good, considering its age.

Kondisi: bekas, nomor mesin/kendaraan: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Column distance: 900 mm Longitudinal movable table size: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Fedpfsh Ra Stox Am Sogc Table feed range: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Max. spindle bore diameter: 230 mm Max. spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speeds, upper range: 2000 rpm Vertical feed of the spindle head: 0.02 - 0.2 mm/rev Number of feed rates: 6 Main spindle power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Required space approx.: 1.9 x 2.2 x 2.4 m

Tahun pembuatan: 1953, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 46, Condition & Origin: We are offering a former toolmaking factory machine – a SIP Hydropik H-6 jig boring machine in excellent condition. The machine has seen very little use and has been out of operation for approximately 2 years. It is immediately available for use in precision manufacturing, tool and die making, or repair sectors. Features & Special Characteristics: - Rotoptic rotary table (original, including transport box) – for highly accurate swiveling and indexing operations - All original documentation available (operating manual, circuit diagrams, inspection reports, etc.) - Guideways in very good condition – no visible wear due to low running hours - Machine from a controlled toolmaking environment, not from mass production Technical Data (short): - Model: SIP Hydropik H-6 - Year of manufacture: 1953 Fgsdpfx Aszb A Tujm Ssc - Total weight: approx. 10 t including rotary table Organization & Loading: The machine must be loaded on site – an appropriately sized forklift is not available. Upon request, we can arrange a third-party forklift for a service fee. If picking up yourself, loading is the buyer’s responsibility. Inspection: Viewings can be arranged at any time by appointment. The machine can be viewed and demonstrated under power.

Kondisi: bekas, Tahun pembuatan: 1995, Spindeldurchmesser_120_mm_xWeg_1500_mm_yWeg_1000_mm_Steuerung_Fa nuc_Tischbohrwerk_Wotan_Rapid_1_Baujahr_1995_Steuerung_Fanuc_Verf ahrwege_X_1500_mm_Y_1000_mm_Z_1000_mm_B_360_Werkzeughalter_BT_50_ 2017_wurde_Retrofit_durchgefuehrt Fjdpfjy U N I Hox Am Sogc

Kondisi: baik (bekas), S+S mesin bor bantalan sudut dan engsel dengan unit atas untuk pengeboran komponen penutup dengan HECHT-Positiomat. - Unit bor bantalan sudut dan engsel yang mengebor dari bawah Fgodpfjy D Ediex Am Soc - HECHT-Positiomat untuk mengontrol unit pengeboran komponen penutup (tidak kami gunakan) Mesin andal dan terawat dari produsen bermerek Schafberger + Sprödhuber

Kondisi: bekas, Tahun pembuatan: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area Drilling/Grooving mm: 0 x 800 / 0 x 800 Stroke of X axis mm: 750 Max. traverse speed of X-Y axes m/min: 25 DRILLING UNIT Vertical spindles: Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis): Number 2 (1+1) Horizontal spindles (along X axis): Number 1 Fixed grooving saw (direction): X Grooving saw diameter mm: 100 Max. saw thickness mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Grooving saw speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Compressed air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air speed m/sec: 20 Extraction nozzle diameter mm: 80+80 Fedpsvvi I Rjfx Am Ssgc F10L Drilling Unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads: 1 in X direction with one bit, 1 double drilling head in Y direction (1 + 1 Drill chuck D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Workpiece positioning and drive of working unit A CNC-controlled suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along X and Y axes occurs on THK linear guides with transmission via reinforced toothed belts. Movement along Z axis is pneumatic on ball-bushing guides, with adjustable stopper positioning. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and operator language fault messages Programming - Programming via the CN - Automatic optimization of drilling operations - Possibility of panel zero-point shift - Possibility to store and import drilling programs via USB dongle - Ability to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the manuals - Graphical representation of unit configuration Vacuum suction cup "B-Power" Vacuum suction cup with double vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine operating interface Software: Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, min. 2GHz; multicore processor recommended - Memory: Minimum 1GB, 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (Package includes an installation DVD and a USB dongle) Xilog Maestro features Programming - Parametric, graphical programming - Assisted programming with graphic and syntax aids for drilling operations - Ability to create and store machining macros Integrated additional functions - Self-diagnosis and operator language fault messages

Kondisi: bekas, Tahun pembuatan: 2002, Kapasitas bor 25 mm, dudukan spindel MK 3 Lokasi: Nattheim Fedpovvi Ausfx Am Sogc

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 152362081, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 2.700 mm, diameter spindel: 110 mm, ketebalan pelat baja (maks.): 100 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 9 rpm, Mesin Bor Radial MAS U 1000 Tahun produksi: 2000 Kontrol: konvensional / digital Dengan meja cakram 1.000 mm dan paket alat Fedpfx Amjrwxpfo Ssgc Pemeriksaan dapat dilakukan kapan saja setelah janji temu.