Beli Brandt Kdn 340 bekas (91)

Kondisi: bekas, nomor mesin/kendaraan: 008371, Typ der angebrachten Kante: dünne Kante, starke Kante, massivholz Klebesystem: EVA Multifunktionsaggregat: ja Nodpfx Aex Swfbjhwowc Max. Vortriebsgeschwindigkeit: 16 m/min Maximale Plattendicke: 60 mm Arbeitsaggregate: 7 nr

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipped with pre-melter unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Application of glue to the workpiece via adhesive roller, both in co-rotating and counter-rotating mode Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compressing upper and lower glue joints Centrally adjustable upper pressure Central manual lubrication of chain track Control panel at machine infeed End trimming unit for front and rear edge overhang; highly precise linear guides 2 motors of 0.18 kW each Tilting range for straight and bevel trimming: 0–15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Tilting range 0–15 degrees with 2 milling motors with combination of straight/radius reversible knives Digital counters allow for quick and precise—i.e., repeatable—settings Two-point pneumatic adjustment of top and bottom milling motors Scraper unit for finishing, with horizontal and vertical tracing Extendable workpiece support up to 350 mm Integrated control system for contactless management of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Nwjdpfx Ahoxya Rtewjc Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Stock location: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, kecepatan rotasi (maks.): 10.960 rpm, Perlengkapan: Penandaan CE, de_en_001 Nedpfx Ahsxw Tugowowc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: 0-261-20-4583, Edge banding machine BRANDT, model KDN 200 Ambition 1200, used Year of manufacture: 2010 Operating air pressure: 6 bar Nwjdpfx Ahoh Ak D Ujwec Power supply: 400V, 3-phase, 50 Hz Total connected load: 4 kW Workpiece thickness: 0.3 / 0.4 up to 8.5 mm Extraction port diameter: 3 x 60 mm Working height: 950 mm Feed speed / Edge banding speed: 10 m/min Coil tape thickness: max. 0.4 mm – 3.0 x 45 mm Noise emission: 84 to 87 dB(A) Transport/overall dimensions (LxWxH): 3,450 x 1,300 x 2,180 mm Net weight: 1,200 kg Processing units: Gluing, End trimming, Top & Bottom trimming, Scraping Price: 4,900 EUR plus VAT (negotiable), FCA: Oradea/Romania Subject to errors, technical modifications, and prior sale. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: C-261-04-2523, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 9.000 m/menit, diameter mata gergaji: 100 mm, kecepatan rotasi (maks.): 12.000 rpm, The submission of a bid obligates the buyer to collect the item by the deadline, no later than 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, edge trimmings, roll material Feed rate: 9 m/min Edge material thickness: 0.4–3.0 mm Lipping thickness: 0.4–3.0 mm Edge material height: 55 mm Roll diameter: 800 mm Speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction connection Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Nwjdpfx Ahexhgk Aowoc Edge material: Roll material Max. band cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Gluing Unit Speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trimming Unit Speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling heads Ø 50 × 12 × 16 mm, z = 4 Combination tools, r = 3 mm: 2 × Trimmers Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Auxiliary voltage: 24 V

Kondisi: bekas, nomor mesin/kendaraan: 006603, Jenis sisi yang terpasang: sisi tipis, sisi tebal, kayu solid Sistem perekat: EVA Penyambungan milling: ya Unit multifungsi: ya Kecepatan makan maksimum: 14 m/menit Ketebalan panel maksimum: 60 mm Unit kerja: 8 buah Nedpfoyngz Asx Ahwowc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis tepi KTD51 untuk profil dan tepi lurus, dengan pengaplikasian lem langsung. Panjang benda kerja minimum 160 mm, ketebalan benda kerja 10–40 mm, ketebalan tepi 0,5–1 mm, radius dalam sekitar 25 mm. Tahun pembuatan 1993, kecepatan maju dapat diatur 4–9 m/menit, 2,6 kW, 400 Volt. Njdpfxovf H I Te Ahwswc

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Nedpovvkd Tefx Ahwjwc

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Nwedpfx Aevvkfwshwsc

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mesin ini dilengkapi dengan alat frais alur, unit pemotong silang, 2 gergaji, stasiun milling, penjiplak sudut, radius dengan bilah pelapis permukaan. Daya terpasang total 10 kW, sambungan udara bertekanan 6 bar. Konsumsi udara per siklus 43 l/menit. Ukuran: 4740 x 1635 x 1706 mm. Ukuran badan: 3100 x 1040 x 1706 mm. Ketebalan tepian 40 – 8 mm. Kondisi baik. Njdpfxsyl Uure Ahwowc Transportasi tersedia dengan biaya tambahan!

Kondisi: bekas, Einseitige Kantenanleimmaschine in Rechtsausführung zum Schmelzkleberauftrag. Schnellwechsel-Leimauftragseinheit für Schmelzkleber. Verarbeitung von PUR-Klebergranulat gemäß Klebstoffvorgaben möglich. Leckagesicherer Leimbehälter unter dem Leimwalzenaggregat. Präziser Leimauftrag auf das Werkstück durch die Leimwalze – keine Anpassung der Werkstückdicke erforderlich. Leimwalze mit wählbarer Drehrichtung für Gegen- oder Gleichlauf. Leimtemperaturüberwachung über elektronisches Thermostat. Automatische Reduzierung der Leimtemperatur während Arbeitspausen. Infrarotbeheizung zur Reaktivierung des Schmelzklebers. Nwjdpsynhwfsfx Ahwec Automatisches Kantenbandmagazin für Rollenmaterial und Fixlängen, inklusive Rollenplatte Ø 800 mm sowie verstärkte Schere für dickes PVC/ABS, max. 3 x 45 mm. Serienmäßige Ausstattung mit Kantenband- und Werkstückabstandskontrolle mit optischer Anzeige. Stabile Druckzone mit angetriebenem, pneumatisch vorgespannter Hauptdruckrolle und drei frei laufenden Nachdruckrollen. Serienmäßige automatische Zentralschmierung der Transportkette. Motorisch verstellbarer Anpressdruck. Bedienpult am Maschineneinlauf. Technische Daten Kantenbandstärke: 0,4 – 12 mm Schneidwerkzeug: max. 3,0 x 45 mm oder 0,8 x 65 mm Werkstückdicke: 8 – 60 mm Vorschubgeschwindigkeit: 11 – 16 m/min (siehe unten) Bei Auswahl von Kantenbanddicken > 3 mm wird die Vorschubgeschwindigkeit automatisch auf 14 m/min umgeschaltet. Beim Einsatz von Formfräsern schaltet die Vorschubgeschwindigkeit automatisch auf 11 m/min. Elektrischer Anschluss: 400 V, 3 Phasen, 50 Hz Druckluftanschluss: 6 bar Anschlussleistung ca. 17 kW Maschinenlänge: 6.860 mm Vollständige Informationen zur Maschine finden Sie auf unserer Webseite burbagemaskin.se

Kondisi: baik (bekas), 0134 Marke: BRANDT - DEUTSCHLAND Modell: KTD 53 Automatische Kantenanleimmaschine für Holz, PVC, Furnier, Möbel, Sonderanfertigungen und Tischlereien. Technische Daten: Min./Max. Plattenhöhe: 10/40 mm Kantenstärke min./max.: 0,4 - 1,5 mm Vorschubgeschwindigkeit: 7 m/min auf motorisiertem Rollenförderer Min. Plattenbreite: 65 mm Ausstattung: Leimauftragseinheit Schneideeinheit Kappschneideeinheit Obere/untere Fräseinheit Fahrrollen am Maschinenuntergestell für einfaches Bewegen Spannung: 380 V / 50 Hz Nsdpfx Ahowq Sc Sewowc Gesamtanschlusswert: 4,5 kW Druckluft: 6 bar Abmessungen (L x B x H): 1800 x 615 x 1170 mm Gewicht: 280 kg

Kondisi: bekas, nomor mesin/kendaraan: 008363, Typ der angebrachten Kante: dünne Kante, starke Kante, massivholz Klebesystem: PUR Fügefräsen: ja Nwodpex Swddofx Ahwjc Multifunktionsaggregat: ja Max. Vortriebsgeschwindigkeit: 18 m/min Maximale Plattendicke: 60 mm Arbeitsaggregate: 7 nr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, lebar benda kerja (maks.): 40 mm, tinggi total: 950 mm, panjang produk (maks.): 3.672 mm, This BRANDT edge banding machine, model Ambition 1110 KDF 110, was manufactured in 2016. It is a single-sided edge bander designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses ranging from 8 to 40 mm. Check the availability of this BRANDT edge bander Ambition 1110 KDF 110 for purchase. Contact us for further details. • Machine type: Single-sided edge bander for straight panel edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge material parameters • Workpiece thickness: 8–40 mm • Workpiece width: min. 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) • Edging material (coils): 0.4–3 mm • Edging material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one clockwise, one counter-clockwise) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable for flush, radius, or chamfer trimming • Profile scraper: For rounding or chamfering prefabricated PVC edges (max. 3 mm) • Glue joint scraper: Removes residual glue in the glue joint area • Control and electrics • Control system: EASY CONTROL EC 10+ with 7” widescreen touchscreen • Program memory: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for transport chain (standard) • Safety: CE compliant; dust tested (TRK max. 2 mg/m³) Nwedeyir S Nepfx Ahwoc Technical Specification Feed speed 8 m/min

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 0-261-04-5736, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 806 h, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 8 mm, kecepatan pemakanan sumbu X: 11 m/menit, panjang total: 5.700 mm, Perlengkapan: dokumentasi / manual, Brandt AMBITION 1440 KDF Tahun produksi: 2011 Tahun pemakaian: 2013 Kondisi sangat baik Nwjdpfx Ahsylvpqowjc

Kondisi: bekas, nomor mesin/kendaraan: 008365, de Nsdpfx Aox Swf Ushwowc

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1996, Mesin Pelapis Tepi Brandt Optimat KD 690 Perlu diperbaiki, kontrol tidak berfungsi dengan baik lagi Tanpa pra-milling Pemotongan tepi depan/belakang Pembulatan milling atas/bawah Pembulatan milling depan/belakang Pisau tarik atas/bawah Pemolesan atas/bawah Nsdpfxeylttge Ahwswc

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with error indication Infrared heating element CE compliant Note regarding used machines: • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Nwsdec Tmygspfx Ahwoc Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: bekas, nomor mesin/kendaraan: 006216, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Pre-milling: yes Multifunction unit: yes Nwjdpfx Asiyu Ibohwsc Top milling unit: yes Max. feed speed: 18 m/min

Kondisi: bekas, nomor mesin/kendaraan: 007834, Jenis tepian yang diterapkan: tepian tipis, tepian tebal, kayu solid Sistem perekat: EVA, udara panas Pramilling: ya Unit multifungsi: ya Kecepatan maju maks.: 18 m/menit Ketebalan panel maks.: 60 mm Unit kerja: 8 unit Nwedpfxjv Sf I Ee Ahwoc

Kondisi: bekas, nomor mesin/kendaraan: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Number of working units: 9 Nedpewuz E Refx Ahwewc

Kondisi: bekas, nomor mesin/kendaraan: 007251, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Nwodpstvrf Tofx Ahwsc Maximum feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 units

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Nsdpfet Hxxpox Ahwewc Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, One-sided edge banding machine with jointing, copy milling, suitable for EVA hot-melt adhesives Nwsdpfeygg Nkox Ahwjc Technical Data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Roll separation: 3 x 45 mm or 0.8 x 65 mm Machine length approx. 6,860 mm Top pressure adjustable in height (manual) Equipment: Infeed fence adjustable (manual) Jointing unit with 2 motors, 2.2 kW each, both motors pneumatically controlled Hot-melt glue application Pressure zone: 1 main pressure roller and 3 subsequent pressure rollers End trimming unit with 2 motors, 0.35 kW each, automatic changeover via program from bevel to straight end trims Edge trimming unit with 2 motors, 0.55 kW each, for flush, bevel or radius trimming, with 4-position fixed point adjustment for side tracing Grooving unit with horizontal shaft (e.g. for back panel grooves) Copy milling unit with 2 motors, 0.35 kW each Pneumatic activation/deactivation Profile scraper unit with pneumatic activation/deactivation Flat scraper unit Buffing unit Additional features: * Release agent application at the infeed PC 16 control unit with color graphic user interface Mounted return system LIGMATECH BOOMERANG ZHR 11 Return system not in operation, requires repair

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Dijual mesin edge banding Brandt yang bagus ini. Mesin dapat dilihat dan diuji di lokasi. Spesifikasi mesin: - Unit potong - Pemanas tepi - Unit gergaji ratakan - Cutter profil atas/bawah Nwodpfx Ahjykindewec - Pisau perata atas/bawah - Unit polishing