Beli Caddy Jendela bekas (1.099)

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), Emmegi Classic Magic Elektronische Doppelgehrungssäge Doppelkopf‑Säge für Aluminium- und PVC-Profile, mit NC‑gesteuertem Gleichstrommotor für die automatische Bewegung des beweglichen Sägekopfs. Sämtliche Winkel pneumatisch einstellbar bis zu 22°30’ außen. Hauptmerkmale Sägeblatt: Ø 450 / 500 mm, Hartmetall bestückt Schnittlänge: 5 m Nutzschnitt Gehrungsbereich: 90° bis 22°30’ außen (pneumatische Verstellung) Positionierung: Direktes Magnetbandsystem zur Längenmessung Steuerung: Alphanumerisches Fluoreszenzdisplay (2 × 40 Zeichen) Speicher: - 99 Profilkorrekturwerte (automatische Winkelerrechnung) - 20 Schnittlisten (je 50 Positionen) über Tastatur - 10 Schnittlisten (je 100 Positionen) über USB (PC) Anschlüsse: USB-Schnittstelle, RJ45-Netzwerkkarte; Etikettendrucker vorbereitet Spannung: Pneumatische Horizontal-/Vertikalspannzangen mit Niederdruckeinrichtung Sicherheit: Pneumatische Vollschutzhauben für den Schnittbereich Kühlschmierung: Wassersprüheinrichtung (Ölemulsion oder Minimalmengenschmierung) Technische Daten Motoren: 2 × 2,2 kW (400 V); Gesamtleistung 5,3 kW Schnittgeschwindigkeit: 2.800 U/min Betriebsdruck: 6–8 bar; Luftverbrauch 15 NL/Zyklus Abmessungen (5 m-Ausführung): 9.400 × 1.080 × 1.840 mm (L×T×H) Gewicht: ca. 1.500 kg Gsdpfxoy U Tczs Agreuc Einsatzgebiete Präzisionsschnitte von Aluminium- und PVC-Profilen für Fenster, Türen, Fassadenelemente und Leichtmetallverarbeitung.

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Elumatec 130 Pusat pemesinan 3-sumbu dengan penukar alat otomatis 8-stasiun untuk profil aluminium atau PVC Jarak gerak maksimum sumbu X: 4200 mm Jarak gerak maksimum sumbu Y: 480 mm Jarak gerak maksimum sumbu Z: 325 mm Kecepatan dapat disesuaikan secara kontinu hingga 6.000 rpm unit kontrol genggam penyemprotan jumlah minimum Kepala sudut dua arah dan spindle kecepatan tinggi Pengukuran dengan kunci 8 penjepit material pneumatik Pengaman cahaya (light barrier) Kondisi sangat baik Gujdpfx Agsy U Dtqeroc

Kondisi: sangat baik (bekas), 7382 TECHNICAL DATA Tenoning carriage: - Electrically driven carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on extendable telescope: 1860 mm - Rotating block in the cross fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Working spindle height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 200 mm - Working spindle height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Extendable support from table - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200 mm - Blade bore diameter: 30 mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw Guodpfx Aozcu Tcogrjc – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Kondisi: bekas, Lubang bor 40 mm Diameter lingkar potong 112–320,4 mm Sistem pisau WP Material: Baja Guodjzc Rx Ijpfx Agroc Satu set alat jendela dari Leitz untuk pembuatan jendela IV 68/78 dalam kondisi sangat baik. Set ini untuk pengumpanan manual (tes BG) pada mesin router meja atau mesin sejenis. Ideal untuk bengkel kayu tanpa lini produksi jendela otomatis.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2020, Panjang benda kerja maks. 6360 mm Spindel frais 1 unit Motor utama 13 kW Kontrol Maestro SCM CNC machining center ACCORD 40 FX untuk jendela dan pintu ----- Sudah termasuk berbagai alat kerja untuk jendela dan pintu, di antaranya (potongan jendela atas permintaan!): Jendela kayu IV 68, 78, 92 Jendela kayu "stilfenster" Jendela kayu-aluminium Pintu masuk rumah Pintu geser angkat Jendela kotak Mesin masih dapat dilihat dalam kondisi operasional! Ringkasan teknis (deskripsi lengkap atas permintaan!): ----- - Area kerja X-Y= 6360x1905 Z =350 - Meja otomatis 8 rel pendukung MATIC - L1825 - Spindel 5-sumbu MAXI - Prisma T, HSK 63 E, 13 kW - Pengaturan RTCP – Sistem kalibrasi sendiri untuk unit kerja Prisma - Perangkat pengelolaan chip pada spindle elektrik, dapat disesuaikan - Persiapan untuk gearbox sudut "Prisma T-S" - Satuan kerja BRC: Mata gergaji untuk pemrosesan ujung, 1 port untuk cutter, vertikal 3 kepala bor vertikal, independen, jarak sumbu 32 mm 3 kepala bor vertikal (tidak saling independen), jarak sumbu 21,5 mm, untuk lubang kunci 4 kepala bor horizontal (masing-masing 2 per sisi, tidak saling independen), jarak sumbu 21,5 mm 2 kepala frais horizontal (masing-masing 1 per sisi) - TRC 48 – Majalah alat di bagian belakang 48 tempat alat (pemegang alat tidak termasuk) Jarak sumbu antar posisi 104 mm Diameter alat maks. 350 mm Panjang alat maks. 320 mm Berat alat maks. per item 10 kg (15 kg dengan spindle HSK 63 E) Berat total maks. pada majalah 250 kg - MACH 5 – Sistem pergantian alat cepat: Memungkinkan pergantian alat pada spindle elektrik hanya dalam beberapa detik. - Operasi bandul - Pelumasan otomatis pada sumbu - Konsol pengoperasian eye-M dengan PC terintegrasi - Panel pengoperasian tambahan yang tetap - TECPAD – remote control untuk fungsi mesin - Persiapan rahang penjepit H145 untuk meja kerja dengan 8 rel - Deretan pembatas depan H110 untuk meja kerja dengan 8 rel - Deretan pembatas belakang H110 untuk meja kerja dengan 8 rel - Vacuum cup H110 145x145 mm - Vacuum cup H110 145x55 mm, dapat diputar - Vacuum cup H110 180x65 mm, dapat diputar - Baris pembatas samping pertama H145 untuk meja kerja dengan 8 rel - Baris pembatas samping kedua H145 untuk meja kerja dengan 8 rel - Penjepit H145 dengan basis bulat - Penjepit H145 dengan basis persegi - 6 perangkat pengangkat double stroke H145 - Laser & pembatas referensi H145 untuk lengkungan (kiri) - Sistem keamanan PRO-SPEED Gjdoy Hl Iyspfx Agrjuc - Maestro cnc – antarmuka untuk pengoperasian dan pemrograman mesin - Maestro pro view – perangkat lunak simulasi Penjualan alat sesuai dengan kondisi, kelengkapan dan aksesoris seperti yang tersedia di gudang kami. Catatan untuk potongan jendela, gambar alat, daftar sistem alat: Perusahaan Engelfried tidak menjamin bahwa alat yang tersedia secara aktual sesuai dengan sistem yang disebutkan atau digambarkan. (data teknis sesuai dengan keterangan pabrikan – tanpa jaminan!)

Kondisi: belum diuji (bekas), de-001 Gusdpfoyn R Iyjx Agroc

Kondisi: belum diuji (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Godpex Tu N Hefx Agrjuc Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): Gjdowunwyepfx Agreuc ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: baru, Finiture lini pengecatan untuk jendela dan pintu ----- Deskripsi singkat: Pos. 1: 1x konveyor gantung rel ganda Pos. 2: 1x unit putar untuk traves dengan satu kopling Pos. 3: 1x "Superjet" sistem pencelupan Gedpfxsy D A Hhe Agrjuc Pos. 4: 1x humidifier bertekanan tinggi Pos. 5: 1x instalasi pemisah air limbah Opsional: Kanal pencelupan atau bak celup (5-6 bak) Deskripsi teknis lengkap dan tata letak, lihat lampiran PDF! ----- Harga lini pengecatan di atas tersedia atas permintaan! ----- (data teknis sesuai produsen - tanpa jaminan!) Semua harga tidak termasuk pajak. PPn berlaku sesuai hukum.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Maximum workpiece length 4400 mm Milling spindle 1 unit Main motor 19.2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specifically designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimal tool configuration - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of workpieces - CNC-controlled work table with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window manufacturing software, meaning the machine does not have to (but can, of course) be operated from the office with external industry software - Powerful 19.2 kW HSK-63 E motor Please note that this stock machine is located with us in Oberkochen and is already equipped with many useful options. Tools available at short notice upon request! Request a quote and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available on request! Enclosed you will find the technical description of the machine as a PDF document. We would also be pleased to take your used machine in part exchange at a fair price! Suitable stationary or mobile extraction systems available on request (see e.g. #5674 NESTRO NE 300) Suitable compressor available on request (#5997 Kaeser Aircenter SM 15) (Technical data as per manufacturer – subject to change!) Godpfeyyqm Ujx Agrjuc

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Spindle slotter 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles as well as VARIO table ..... Machine has already been professionally dismantled and stored at 73447 Oberkochen Technical Data Summary (additional included accessories on request) ..... Cross-cut saw ..... > Cross-cut saw electronic, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detection of saw section > Axial travel 150 mm NC axis, stepless electronic > Radial travel pneumatic, 8 positions for e.g. edge rounding from above Rounding unit ..... > Position: horizontal bottom > Axial travel together with cross-cut saw. electronic length stop ..... > Length: 4500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Rear counter bearing, the full clamping length is supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Rear counter bearing, the full clamping length is supported Transfer belt ..... For transfer of parts to longitudinal processing including double part separation upstream of the longitudinal processing infeed. 1st Profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm NC axis, stepless > Radial travel 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm NC axis, stepless > Radial travel 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm 3rd Profile milling unit (grooving unit from above) Gedpeyrtzkjfx Agrsuc ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial travel 30 mm NC axis, stepless > Radial travel 125 mm NC axis, stepless > Spindle speed: 90...

Kondisi: belum diuji (bekas), Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Guodpfxjx H Al Ne Agrjc 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm Gjdpfxexpi Due Agrsuc pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: siap digunakan (bekas), Slot spindle, 1 unit Number of milling units: 1 unit Spindle diameter: 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot mortiser. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4,000 3) Oertli tooling for Haberkorn and Okoma machine. Price: €7,500 Timber window tool set IV 68/78/88 and timber-aluminium window tool set IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and handle drilling machine, for Maco MultiMatic hardware. Price: €7,000 (Hardware can be changed for a surcharge upon request!) ----- Technical Manufacturer Description: - Haberkorn FZS1 slot mortiser with automatic feed - Stepless height adjustment, D 40 mm Crosscut saw: - Spindle mounting: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2,800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning: pneumatic, manually adjustable - Safety and extraction hood with suction port diameter: 100 mm Slot spindle D 40 mm: - Power: 7.5 kW - Speed: 4,200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm Gjdpfx Aexa Hi Nsgrjuc - 220 mm stroke, stepless height adjustment via precision recirculating ball screw - Safety and extraction hood with suction port diameter: 180 mm - Automatic brake with speed monitoring Swing table: - Swivel range: +/- 65° - Automatic counter block change (programmable) - Pneumatic clamp - High-precision electronic degree display - Automatic length compensation - Counter block in the cutting plane at every angle setting Special equipment: - Laser for workpiece positioning - Pneumatic saw positioning - Length stop LA 2,500 mm + 1,850 mm extension ----- 2) Okoma SF3F table milling machine with vertical spindle, 3 tools - Suction port connectors: 2 x 120 mm - Spindle length: 270 mm - Fence with fine adjustment and turret head - Triple stroke, max. lift height 90 mm - Glazing bead separating saw with safety and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for glazing bead saw setup - Pneumatic notching device, electronically controlled for edge gear, speed 6,000 rpm - 2 x 3 kW motors - Mounting diameter: 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set wooden window IV 68/78/88 - 1 set timber-aluminium window IV 68/78 Tools are sold in the condition, scope, and with accessories as available at our warehouse. Note regarding window profiles, tool drawings, tool system lists: Fa. Engelfried provides no guarantee that the tools actually available correspond to the named or illustrated systems. ----- 4) Götzinger OBM Plus corner hinge and handle drilling machine - Corner and scissor stay + handle drilling - Vertical drilling unit with: - Quick change drill head - Pneumatic feed via foot pedal - 1 x handle drill head, 24 mm - 1 x double head corner bearing - Maco MultiMatic hardware - 1 x adjustable folding stop left with 6 stops - 1 x adjustable folding stop right with 6 stops - 1 x machine stand complete with storage shelf - 220/400 V, 60 Hz, 1.3 kW - 1 x roller track approx. 1 m long with 2 rollers - 1 x roller track approx. 1.5 m long with 3 rollers ----- Price of the ...

Kondisi: diremaj di bengkel (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle Gjdpfjvu Hfqjx Agrsuc ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), Pusat perakitan perangkat keras untuk kusen pintu dan jendela - Standar CE Data teknis: Meja kerja dilapisi dengan strip felt anti gores, bagian belakang dapat dimiringkan secara pneumatik dari 0° hingga 10° dengan sudut antara Komposisi: Kereta dengan obeng pneumatik otomatis yang dilengkapi pengisi Böllhoff, langkah kerja dikendalikan oleh silinder pneumatik dengan sistem inklusi-eksklusi, penyesuaian tinggi Stopper kanan/kiri untuk posisi ketinggian lubang pegangan kanan/kiri Unit pengeboran dengan kepala 3 mata bor untuk membuat lubang pegangan Gunting hidrolik yang dioperasikan secara pneumatik untuk pemotongan perangkat keras Ukuran meja kerja mm 3500 x 1230 Tinggi meja kerja mm 920 Dimensi kerja maksimum mm 2800 x 2450 Dimensi kerja minimum mm 350 Gujdpfxozcqxnj Agrjc Pengumpul debu Tekanan kerja 6/7 bar Dimensi keseluruhan mm 3600 x 1700 x 1000 h Berat kg 480

Kondisi: bekas, Tahun pembuatan: 2023, mlt_f8-e4e63566-d128-4f24-baee-eec9bfa2f50c Godpfx Agezbvmhorjuc

Kondisi: belum diuji (bekas), Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Guodpfsyq Sztex Agrec Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: siap digunakan (bekas), Weinig Unicontrol 6 - Technical Data Summary The machine will be inspected at our facility in Oberkochen before delivery! Technical Data Summary (Please inquire about any additional included accessories.) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pcs. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for cut line recognition CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenon and Slot Spindle ----- > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (climb and counter-rotation) ----- > Position: vertical right > Number of tools: 1 pcs. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: 3 (pneumatic stroke 2 x 100 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 – 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle for processing narrow, short parts (e.g., glazing bars). Glazing bar guidance comprising a glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment range: 52 mm, indexed to 2 positions > Radial adjustment range: 125 mm, indexed to 2 positions Pos. 6: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 90 mm, indexed to 3 positions > Radial adjustment range: 100 mm, indexed to 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further Features Gsdpfxextvgkj Agreuc ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Rebate device for chip-free rebating > Double workpiece package > Return conveyor for one-man operation: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control / NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profile spindle 1....

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Set Pisau Profil dan Slot Wendeplatten untuk Jendela & Pintu OPPOLD WEFIX IV 68 Kondisi sangat baik, seperti baru, set pisau ini hanya sedikit digunakan. Terdiri dari 16 kepala pisau profil dan slot double rabbet. Dilengkapi dengan gambar detail, yang dapat Anda terima melalui email bila diperlukan. Semua kepala pisau cocok untuk spindle atau dudukan 50mm. Pisau carbida (Wendeplatten) untuk set pisau jendela ini tetap tersedia dari OPPOLD selama bertahun-tahun ke depan. Sebagian besar pisau menggunakan tipe standar, sangat ekonomis karena pisau standar sangat terjangkau dan dapat digunakan pada beberapa sisi. Tinggi penjepitan: 80 dan 95mm. Pisau carbida memiliki masa pakai yang sangat tinggi. Cocok untuk weather bar tipe BUG R12.25S dan GUTMANN Werra 12.25, serta ambang bawah tipe BUG BSL12.25S dan GUTMANN Lech 12.25. Dengan sambungan dekoratif R 3mm. Set pisau ini lengkap. Semua pisau dalam kondisi baik dan tajam. Kepala-kepala pisau siap langsung digunakan. Dengan set pisau ini Anda dapat memproduksi jendela dan pintu masuk IV68 dengan double rabbet, euronut, euro rabbet, dan celah rabbet 12mm. Harga baru seluruh kepala pisau sekitar 35.000 DM. Untuk ketebalan material 68mm. Seal, weather bar, dan aksesori pisau masih dapat diperoleh untuk set ini dalam waktu lama. Set pisau ini akan dikirim secara personal ke seluruh Jerman seharga 220,00 Euro, sehingga Anda tidak akan menanggung risiko saat membeli. Set terdiri dari: 10 Profil Double Rabbet: K3 4660 L4 Sill luar frame K3 4660 L7 Samping dan atas frame K3 4660 L6 Sisi dalam daun tanpa list 3 140 10 54 Daun tegak dan bawah 3 140 20 70 Pisau lawan 3 140 00 00 Sisi dalam daun dengan list 3 140 10 50 Daun luar samping dan atas 3 140 10 52 Daun luar samping dan atas lawan arah 3 140 10 58 Daun rabbet tengah Gedpfxszda Ego Agrjuc Tanpa penandaan Daun dalam bawah serta 6 Slot Cutter: K2 3663 Z3 Frame slot K2 3663 Z2 Tenon daun K2 3663 Z4 Tenon frame atas melintang K2 3661 Z1 Slot daun K2 3661 Z5 Tenon frame bawah K2 3661 Z6 Pembelian tambahan, tanpa gambar

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, WEINIG Unicontrol UC 10-5 Window Production Machine Godpfx Agsxmr N Ierjuc 1. Electronically controlled cross-cut saw with laser switching between saw cutting and zero-cut wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor 3. Longitudinal/profile milling spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on right side, 3 kW motor Fittings spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position tool changer Electronic length stop 3600 mm Workpiece return via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric tabletops (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi kerja penuh dan dalam keadaan baik. Dimensi kerja: 3200 x 2200 mm Pengaturan dimensi dikontrol secara elektrik dari panel kontrol. Guedpfsxmr Rxsx Agrec Ditenagai oleh unit hidrolik.

Kondisi: bekas, jarak tempuh: 40.760 km, daya: 84 kW (114,21 hp), pendaftaran pertama: 11/2021, jenis bahan bakar: bensin, berat keseluruhan: 2.150 kg, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 2, Tahun pembuatan: 2021, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 47.250 km, daya: 90 kW (122,37 hp), pendaftaran pertama: 05/2022, jenis bahan bakar: diesel, berat keseluruhan: 2.250 kg, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, jumlah tempat duduk: 2, Tahun pembuatan: 2022, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 362.520 km, daya: 77 kW (104,69 hp), pendaftaran pertama: 08/2009, jenis bahan bakar: diesel, berat keseluruhan: 2.035 kg, warna: putih, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 5, Perlengkapan: ABS, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),