Beli Camlock bekas (156)

Kondisi: bekas,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 150 High-Precision Lathe with 2-axis Digital Readout ND780 Technical Specifications: Nwsdpfx Ajwynlujbusb >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025 - 0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-jaw chuck 160 mm, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of spare jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: bekas, Tahun pembuatan: 2022, Optimum Optiturn TH5620V - Lathe with DPA and SWH Used, with signs of wear - Hardened and ground Z-axis guideway - Camlock spindle mount DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide swiveling range ± 90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Gearwheels smoothly running, hardened, and ground, mounted in 2 adjustable precision tapered roller bearings - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life cycle calculation, tested according to EN ISO 13849 - Bed carriage right-/left-hand operation via changeover shaft - Central lubrication on bed carriage - Leadscrew cover - Emergency stop push button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling: 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Strongly ribbed prism bed, inductively hardened and precision ground from grey cast iron Nwjdpjx Dzxajfx Abujb - Coolant system with separate coolant tank, level indicator, and oil separator; easy and complete drainage and cleaning to DIN standard - LED machine lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity: Ø 105 mm - Siemens Sinamics frequency converter / Safety Integrated - Energy chain for gentle cable and hose routing - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for 25 mm square tool bits - Digital Position Display DPA 21 - Glass linear scales Dimensions and Weights: Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges: Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data: Output power (motor power): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump power: 125 W Standards and Approvals: Standard: DIN EN 55011 Tailstock: Taper: MT 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder height: 25 mm Spindle taper: Ø 113 mm (taper 1:20) Threading: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Travel: Top slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Kondisi: bekas, Tahun pembuatan: 2023, en-001 Nwsdpfx Abjx Hdq Teusb

Kondisi: baik (bekas), colchester-combi-4000-en Nwjdpfjx S N Hdsx Abuob

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LVM50GIRJA/02115, SPESIFIKASI MESIN Tinggi pusat: 170 mm Putaran di atas tempat tidur: 350 mm Putaran di atas eretan silang: 196 mm Nwodpfx Ajycg Thjbueb Putaran pada celah: 535 mm Lebar depan pelat muka: 165 mm Panjang tempat tidur antara pusat: 1250 mm Kecepatan spindle (variabel tak terhingga): 15-3250 rpm Mounting hidung spindle (Camlock): D1-4 Lubang spindle: 42 mm Motor spindle: 7,5 kW Lebar over bedways: 318 mm Perjalanan eretan silang: 250 mm Perjalanan eretan atas: 100 mm Perjalanan laras tailstock: 145 mm Taper dalam laras tailstock: No. 4MT Mesin dengan eksekusi Imperial MESIN DILENGKAPI DENGAN Sistem DRO 2 sumbu Newall DP700 Chuck 3 jaw Quick change toolpost dan 3 toolholder Bedstop Penerangan Pelindung chuck Sistem pendingin Splashguard belakang

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0153, de Nedpfx Abonxi H Uouswb

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Manufacturer: 600 Lathes Model: Harrisson V350 Center height: 170 mm Turning diameter over bed: 350 mm Turning diameter over cross slide: 196 mm Turning diameter in gap: 535 mm Width in front of faceplate: 165 mm Distance between centers: 650 mm Spindle speeds (infinitely variable via potentiometer in 3 speed ranges with digital display): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle nose (Camlock): D1-4 Spindle bore: 54 mm Spindle motor: 7.5 kW Saddle guide width: 318 mm Cross slide travel: 250 mm Top slide travel: 140 mm Tailstock quill travel: 140 mm Quill taper: MT4 Quill diameter: 63 mm Machine supplied in metric version Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral pitch: 8 - 56 (20) Drive power: 7.5 kW Equipment: 3-axis digital readout Röhm 3-jaw chuck, dia. 200 mm 4-jaw chuck, dia. 160 mm Collet chuck Steady rest Nsdpfoxcuulsx Abujwb 4-position quick-change tool post Live center Chuck guard Additional chip guard on carriage Coolant system Rear splash guard Machine documentation including circuit diagram Dimensions: Floor to spindle center: 1050 mm Overall length: 1900 mm Overall width: 1100 mm Overall height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site. All information without guarantee. Subject to errors and prior sale.

Kondisi: bekas, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 240 mm - Camlock: 3-pin mount, bolt circle Ø 140 mm, short taper Ø 102 mm - Bore: Ø 77 mm Nsdpfjduiwvjx Abujwb - Weight: 29 kg

Kondisi: bekas, Chuck flange, flange mount, lathe chuck adapter, drive flange - Chuck flange with: drive pins Nwjdpfxjd Hcqyj Abujb - Outer diameter: 190 mm - Camlock mounting: DIN 55029 - Taper size: 5 - Bolt circle: Ø 104.8 mm - Weight: 8 kg

Kondisi: bekas, Chuck flange, flange mount, lathe chuck flange, driving flange - Chuck flange: suitable for three-jaw chucks, four-jaw chucks, faceplates - Outer dimensions: Ø 270 x 110 mm - Inner dimensions: Ø 240 x 81 mm - Mount: Camlock short taper 8 (139 mm) - Bolt circle: Ø 171 mm - Quantity: 1 disc available - Price: per piece - Weight: 16.6 kg Nwsdpfob Hd Ucsx Abusb

Kondisi: bekas, Chuck flange, flange mount, lathe chuck flange, drive flange - Chuck flange suitable for: 3-jaw chuck, 4-jaw chuck, faceplate - Outer diameter: 230 mm Nwsdpfx Aed Hcrhobujb - Camlock mount: DIN 55029 - Cam size: 6 - Bolt circle: Ø 6 x 133.4 mm - Weight: 10 kg

Kondisi: baik (bekas), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Chuck size: Ø 250 mm -Camlock: 8 -Thread: M30 Nwsdpfx Ajd Itcljbueb -Pitch: 1.5 mm -Weight: 38.5 kg

Kondisi: bekas, Face plate, faceplate chuck, four-jaw chuck, facing chuck - Chuck size: Ø 320 mm - Mount: Camlock short taper 6 - Bolt circle: Ø 133 mm - Through hole: Ø 95 mm Nsdpfsgqylxjx Abujwb - Weight: 40 kg

Kondisi: baik (bekas), Four-jaw chuck, four-jaw lathe chuck, 4-jaw chuck, faceplate, faceplate chuck, facing chuck -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Bore: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Short taper 6 / Cone 103-106 mm, short taper flange with Camlock mounting -Dimensions: Ø300 x 190 mm Nwsdpfxet Sz Idj Abueb -Weight: 40 kg

Kondisi: bekas, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 160 mm Nwjdod R Excspfx Abusb -Camlock: 5 -Through-hole: Ø 42 mm -Weight: 8.7 kg -Scope of delivery as shown in the pictures

Kondisi: baik (bekas), Face plate, faceplate chuck - Chuck size: Ø 500 mm - Camlock: short taper mount, taper size 11, bolt circle Ø 235 mm Nwjdodu Ufmjpfx Abujb - Weight: 67 kg

Kondisi: baik (bekas), 3-jaw chuck adapter, 3-jaw chuck, 3-jaw lathe chuck - Outer diameter: Ø 300 mm - Spindle mount taper: Ø 139 mm Camlock size 8 - Bolt circle: Ø 172x6 mm - Mounting thread: Ø 80x5 mm - Weight: 46 kg Nwodpob A Szijfx Abueb

Kondisi: baru, en-GB Nsdsk Egrpspfx Abujwb

Kondisi: baru, Max. turning diameter: 560 mm Max. turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Center height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed speeds: 35 / 0.059 – 1.646 m/min Cross feed speeds: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight approx.: 2,560 kg Space requirement approx.: 3,450 x 1,150 x 1,650 mm Item no. 3462170 This is a heavy-duty machine, distinguished by high flexibility, precision, and efficiency. Equipped with digital position display DPA 31 Plus and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guideways are adjustable via tapered gibs - Right/left-hand rotation at bed carriage selectable via control spindle - Dual-channel safety electronics - Central lubrication on bed carriage - Top slide adjustable range ±90° Njdpfsucgr Isx Abuswb - Main spindle runs in oil bath - Shafts and gears operating in oil bath - Gears are smooth-running, hardened, ground, and supported with 2 adjustable precision taper roller bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125, X and Z axes - Gears and shafts hardened and ground, running in precision oil bath bearings - Clearly arranged selection levers for feed speed selection - Enclosed quick-shift feed gearbox design - Emergency stop toggle switch, motor protection switch, lockable main switch - Emergency stop device with foot control - Tailstock offset ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose management - Heavily ribbed prismatic bed, inductively hardened and precision ground from cast iron - Coolant system with separate coolant tank, level indicator, and oil separator; easy and complete draining and cleaning as per DIN - Thread dial gauge scale adjustable Scope of delivery: - Fixed steady rest, max. capacity Ø 165 mm - Follow rest, max. capacity Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø 113 mm / MT 5 - Fixed center MT 5 - Fixed and revolving center MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial gauge - Initial fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, self-centering Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Kondisi: baru, Swing diameter 360 mm Turning length 1000 mm Swing over cross slide 360 mm Centre height 180 mm Spindle speed 70–2400 rpm Total power requirement 2.2 kW Machine weight approx. 680 kg Space requirement approx. 2000 x 1500 x 900 mm Equipment: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 5 - Motor circuit breaker - Main motor electrically braked - Switching between clockwise/counter-clockwise rotation possible at the carriage - Dual-channel safety electronics - Switch tested with life cycle assessment according to EN ISO 13849 - Perfectly concentric main spindle ensures high load capacity thanks to mounted precision taper roller bearings - Safety device prevents simultaneous operation of thread-cutting and feed mechanism - Safety handwheels with disengaging function on X and Z axes - All gears in the feed gearbox made of steel, hardened and ground, Nwjdpfxjw U U Tms Abusb - Shafts supported on needle bearings, all components lubricated in an oil bath - Simple feed operation - One change gear position - Control cabinet with OPTIMUM control system - Coolant pump with coolant tank and level indicator. Tank removable for easy cleaning - LED machine lamp integrated in machine housing - Machine base of stable steel construction - Emergency stop push-buttons on the right and left - Lockable main switch Special accessories: Incl. 3-jaw chuck Incl. quick-change toolholder

Kondisi: baik (bekas), Faceplate, Faceplate Chuck Nodpfx Asdu Ufzjbuewb - Chuck size: Ø 500 mm - Camlock: Short taper mount, taper size 8, bolt circle Ø 171.4 mm - Weight: 54 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 37 mm, diameter pembubutan: 250 mm, diameter pembubutan di atas alas geser: 250 mm, tinggi pusat: 125 mm, panjang pembubutan: 1.000 mm, panjang total: 1.500 mm, lebar total: 800 mm, tinggi total: 1.200 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan rotasi (maks.): 2.000 rpm, Pabrikan: Harrison Model: M-250 Nwedox Rrpfspfx Abusb Kondisi: Bekas Diameter putar maksimum di atas tempat tidur: 250 mm Panjang pemesinan maksimum antara pusat: 1000 mm Lubang spindle: 37 mm Kecepatan spindle maksimum: 2000 rpm Koneksi spindle: Camlock Jenis dudukan alat: Drehblitz Dimensi mesin (P x L x T): 150x80x120 cm Tegangan sambungan: 400 V Sistem pendingin: Ya Tampilan digital: Ya, 2 sumbu

Kondisi: baru, Tahun pembuatan: 2025, The CORMAK 500 x 1000 (CJ6250Cx1000) universal lathe is a robust and precise conventional metalworking lathe, designed for professional use in industrial plants, tool rooms, and maintenance workshops. Featuring a high-rigidity bed, modern drive system, and versatile standard equipment, this machine ensures reliable and repeatable performance for both single-piece and series production. Key features: - Induction-hardened bed, resistant to twisting and vibrations – ensures machining accuracy. - Removable gap bridge, allowing machining of workpieces up to 630 mm in diameter. - Modern spindle support with ball bearings ensures stable operation at high speeds. - Precise spindle speed and feed adjustment – full process parameter control. - Rapid longitudinal and cross feeds – increases productivity. - Digital readout for 3 axes for enhanced dimensional control and reduced setup time. - Extensive threading capabilities – metric, imperial, module, and DP threads. - 5.5 kW main motor – high power for demanding material machining. Standard equipment: - 3-axis digital readout system - 3-jaw self-centering chuck, 250 mm diameter - Fixed steady rest - Travelling (follow) steady rest - Spindle reducing sleeve - Foot-operated safety brake - Full-length chip guard - Coolant system - 24V halogen lighting system - Thread indicator - Tool kit - EC Declaration of Conformity - Operating manual - Brand new machine, under warranty Technical specifications: - Swing over bed: 500 mm - Swing over cross slide: 325 mm - Swing in gap: 630 mm - Gap length: 260 mm - Turning length: 1000 mm - Bed: Induction hardened - Bed width: 330 mm Njdpfxoxd Upxo Abuewb - Chuck diameter: 250 mm - Spindle bore: 80 mm - Spindle nose: D1-8 CAMLOCK - Spindle speed range: 24–1600 rpm - Max tool size: 25 x 25 mm - Longitudinal feed range: 0.072–4.038 mm/rev - Cross feed range: 0.036–2.019 mm/rev - Cross slide travel: 305 mm - Compound slide travel: 130 mm - Metric threads: 1–192 mm - Imperial threads: 0.5–28 TPI - Module threads: 1–56 mm - DP threads: 8–56 - Tailstock quill diameter: 65 mm - Tailstock quill travel: 120 mm - Tailstock taper: MT 5 - Digital readout: 3 axes - Main motor power: 5.5 kW - Coolant pump power: 0.1 kW - Machine weight: 1700 kg

Kondisi: baru, Tahun pembuatan: 2025, CORMAK GOLIAT 660 x 4000 mm Industrial Metal Lathe – robust cast iron bed construction equipped with a 12-speed gearbox and a powerful 7.5 kW/400V induction motor – maximum torque, large 105 mm spindle bore. Key advantages: - Centralized feed switching system, leadscrew and feed shaft for threading - Digital readout operates on three axes: longitudinal, cross, and compound. The processed electronic signal from optical scales displays values of axis movements on the digital screen. - Lathe equipped with a high-quality, reinforced spindle bearing system. Modern main spindle supported on ball bearings - Optimum machining results provided by a large 105 mm spindle bore, 4000 mm center distance, 320 mm three-jaw chuck, and a powerful 7.5 kW motor. - Rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. - Hardened and ground gears in the spindle gearbox – ensuring long-term stable operation. - Equipped with a leadscrew and feed shaft for thread cutting, automatic longitudinal and cross feeds. Nwsdpfxjvw Abgj Abujb - Easy spindle speed and automatic feed adjustments via an ergonomic control panel on the gearbox. - Capable of cutting a wide range of threads without the need to change gears in the gear train. Wide threading capability: metric (22) 1 – 14 mm, imperial (25) 2-28 TPI, module (18) 0.5-7 MP, D.P. thread (24) 4-56 DP. Supports both right-hand and left-hand threading. - Threading dial for precise thread pitch counting. The function is intended to save time by allowing the leadscrew nut to be disengaged and quickly returned to its original position for repeated passes. - The bed is fitted with a removable gap bridge for turning oversized workpieces, such as discs. This lathe model allows machining of up to 870 mm diameter with the bridge removed. Technical specifications Maximum turning diameter over bed: Ø660 mm Maximum turning diameter over carriage: Ø420 mm Maximum turning diameter in gap: Ø870 mm Gap length: 240 mm Distance between centers: 4000 mm Maximum turning length: 3950 mm Spindle bore: Ø105 mm Spindle nose diameter and taper: Ø113 mm 1:20 Spindle mount: D1-8 CAMLOCK Spindle speeds: 12 (36–1600 rpm) Number and range of longitudinal feeds: 65 (0.063–2.52 mm/rev) Number and range of cross feeds: 65 (0.027–1.07 mm/rev) Metric threads: 22 (1–14 mm) Imperial threads: 25 (28–2 TPI) Module threads: 18 (0.5–7 mm) DP threads: 24 (56–4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Leadscrew pitch: 12 mm Spindle axis distance to tool surface: 28 mm Tool size: 25 x 25 mm Maximum compound rest travel: 145 mm Maximum cross slide travel: 380 mm Tailstock quill diameter: 75 mm Tailstock taper: MT5 Maximum quill travel: 150 mm Tailstock offset: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W, 25 L/min Dimensions (L x W x H): 5500 x 1100 x 1450 mm Weight: 5200 kg