Beli Cepat Radial Pengeboran Mesin bekas (87.669)

Kondisi: siap digunakan (bekas), Max. speed: 2000 rpm, with operating manual. Dkjdelbmtgopfx Aayou

Kondisi: baik (bekas), COLETT / GAMESA - Radial Drilling Machine, Mobile Deployment via Crane - Boom length approx. 1200 mm - Universal angle head - Spindle speeds: 95 - 750 rpm - Automatic feed - Morse taper MK 4 - Height-adjustable boom, approx. 1400 mm - Control cabinet - retrofit Dimensions: LxWxH: 2 x 1 x 2.1 meters / Weight: 1500 kg Djdpfx Ajw Dpn Eeayjku Subject to errors and input mistakes.

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm Djdpfxoq Ii Dls Aaysku - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: baik (bekas), Maximum drilling diameter in steel: 50 mm Minimum arm reach (minimum distance from spindle axis to column): 450 mm Maximum arm reach (maximum distance from spindle axis to column): 1600 mm Minimum spindle speed: 20 rpm Maximum spindle speed: 2000 rpm Dedpfx Aasttriwoyjku

Kondisi: baru, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Dkodpfx Aeq E Izmjayeu Spindle stroke ----- 135 mm Throat depth ----- 300 ~ 720 mm Spindle taper ----- MT3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/rev Cube table ----- 250 x 250 x 250 mm Column diameter ----- 150 mm Base ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 kW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDED * Cooling system * CE plug * SCHNEIDER electrics OPTION * Base cabinet

Kondisi: siap digunakan (bekas), Radialbohrmaschine, Gebrauchtmaschine Marke: CSEPEL Modell: R.F. 2a Beschreibung: Säulendurchmesser: 350 mm Dkodpow Db Nuofx Aayou Vertikaler Verfahrweg des Auslegers: 1200 mm Horizontaler Verfahrweg des Bohrkopfes: 1000 mm Vertikaler Verfahrweg der Spindel: 400 mm Spindeldurchmesser: 65 mm 12 Spindeldrehzahlen: 47,5 – 2100 U/min 8 Vorschubstufen: 0,048 – 1,2 m/min Motorleistung: 9 PS

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A CNC fixed-table milling and drilling center Bimatec Soraluce is available. Travel distances X/Y/Z: 2500mm/900mm/1600mm, spindle speed: 2000 rpm, spindle taper: ISO40/M16, tool stations: 30. Transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13,500kg, control unit: Heidenhain CNC 415, operating hours: 31,507 h. Includes fixed table, moving column, automatic indexing milling head, manual touch probe, coolant system, and filtration unit. Documentation is available. Inspection on site possible. Dkedpju T Rgwjfx Aayju

Kondisi: baik (bekas), Nomor gudang: 3024 Produsen: GSP Tahun pembuatan: Tipe / Model: 405T125 Nomor mesin: 2913 Kapasitas pengeboran: 40 mm Kepala spindle: MK 4 Rentang kecepatan putar: 40 hingga 1.800 rpm Feeder: 0,09 hingga 0,36 mm/putaran Kontrol: konvensional Jarak radial: 250 hingga 1.250 mm Meja kubus: 800 x 560 x 600 mm Luas area pemasangan: 1.800 x 800 mm Daya total yang terhubung: kW Aksesori/perlengkapan: Blok penjepit Kondisi: baik, siap pakai Berat: sekitar 1 t Dksdpfjw Rkc Aox Aayeu Dimensi: 2.000 x 800 x 2.500 mm

Kondisi: bekas, Tahun pembuatan: 1999, Outreach approx. 10 cm Dkjdpfewk Rapox Aayou T-slot clamping cube Chip container: yes Space requirement approx. 80 x 60 cm with 2 steel cabinets, shelf section, with accessories

Kondisi: belum diuji (bekas), Well-maintained radial drilling machine Drilling capacity in steel: 40.0 mm Arm reach: 1300 mm Tool holder: MT4 Max. swivel angle: +/- 180 degrees Quill stroke: 280 mm Min. distance column to drill spindle (X): 593 mm Max. distance column to drill spindle (X): 1473 mm Spindle speed: 52 - 2000 rpm (12 steps) Feed: 0.05-0.1-0.2-0.3 mm/rev (4 steps) Column diameter: 250 mm Spindle diameter: 68 mm Clamping surface: approx. 1445 x 810 mm Operating voltage: 400 V Total power requirement: 5.5 kW Machine weight: approx. 2815 kg Space requirements (L x W x H): 2010 x 820 x 2495 mm Features: - Electric height adjustment - Hydraulic clamping of drill carriage and column - Cube clamping table with T-slots - Automatic spindle feed - Spindle with forward/reverse rotation Dedjirngaopfx Aaysku - Electric boom height adjustment - Manual speed setting - Manual feed setting - Handwheel for drill carriage adjustment We are happy to demonstrate the machine under power at our premises. All information is given without obligation. Subject to prior sale. This item is sold excluding any warranty or guarantee. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller or for injury to life, body or health.

Kondisi: baik (bekas), Tahun pembuatan: 1973, Drilling capacity in steel (diameter): 55 mm Arm reach: 1600 mm Dsdpsvwgnkjfx Aayoku Workpiece height max.: 1600 mm - Drilling capacity (solid drilling in steel): 55 mm - Maximum arm reach: 1600 mm - Maximum workpiece height: 1600 mm - Quill stroke: 350 mm - Required space (left/right): 2700 mm - Required space (front/back): 1100 mm - Overall height: 3400 mm - Total weight approx.: 4500 kg Quill feed rate: 0.056 - 2.5 mm/min Spindle speed: 20 - 2000 rpm Tool holder: Morse taper 5 (MT 5) The radial drilling machine is in good condition.

Kondisi: baru, Drilling capacity in steel ----- 50 mm Motor power ----- 4 kW Speed range ----- 25 ~ 2000 rpm Spindle stroke ----- 315 mm Swing ----- 350 ~ 1600 mm Spindle taper ----- Morse Taper 5 (MT5) Spindle feed ----- 0.04~3.2 mm/rev Cube table ----- 630 x 500 x 500 mm Dksdpfx Asga Ty Neayou Column diameter ----- 350 mm Base ----- 2400 x 1000 x 200 mm Maximum distance spindle - base ----- 350 ~ 1220 mm Weight ----- 3500 kg INCLUDES * Hydraulic clamping * Coolant system * CE plug * SCHNEIDER electrics

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1959, Three old used machines without documentation are available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines are in working condition. On-site inspection is possible. Djdpfstk Rwlox Aayoku

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 32 mm Throat depth: 1250 mm Max. workpiece height: - mm Distance from column to spindle center: 1250 mm Horizontal travel of drill head: 980 mm Vertical adjustment of arm: 800 mm Distance table to bottom edge of spindle: 2.05 x 9.2 x 2.85 mm Spindle taper: MT 4 Quill stroke: 280 mm Infinitely variable speed range: 28–1,195 rpm (3 steps) Arm swivel range: 90° Feed: 0.1/0.2/0.3/0.4/0.8/1.2 mm/rev (6 steps) Column diameter: 300 mm Clamping surface of base plate: 1,370 x 750 mm Approx. machine weight: - t Approx. machine dimensions (LxWxH): 2.05 x 9.2 x 2.85 m Coolant system with supply Table with clamping surface 1,370 mm x 750 mm Djdpjwid Auofx Aayeku Incl. drill cube

Kondisi: bekas, Tahun pembuatan: 1996, Lintasan x 850 mm Lintasan y 630 mm Dkodouxfz Aopfx Aaysu Lintasan z 500 mm Kontrol Heidenhain Kebutuhan daya total 16 kW Kebutuhan ruang sekitar 5 x 4,2 m

Kondisi: bekas, en-GB: Technical Details: Drilling capacity in steel (diameter): 50 mm Arm reach: 360–1600 mm Maximum workpiece height: 320–1220 mm Spindle stroke: 315 mm Spindle taper: MT 5 Dkodpfewutvhsx Aayou Drill spindle speeds: 25–2000 rpm Number of spindle speed steps: 16 Table clamping surface: 630 x 500 x 500 mm Total power requirement: 4 kW Space requirements approx.: 2600 x 1120 x 2600 mm Machine weight approx.: 3.5 t 1 pc. Radial Drilling Machine Z3050 x 16/2 – Trade Fair Demonstration Machine / NEW Includes: - Box table - Drill chuck - Reducing sleeve - Wrenches - Foundation bolts Special features: - Sturdy cast iron construction - Gearbox with hardened and ground gears running in an oil bath - Thread cutting via spindle reversal - Hardened and ground heavy-duty column - Right/left rotation - Drilling depth stop - High spindle torque - Feed overload clutch - Low-noise operation - Hydraulically shifted feed and spindle gearbox with preselection - Hydraulic clamping of the stop, column, and drill head

Kondisi: perlu perbaikan (bekas), Drilling capacity in steel / diameter: [mm] Throat depth: 1000 mm Workpiece height, max: [mm] - Max. throat depth: 1000 mm - Quill stroke: 250 mm Milling spindle / head: - Spindle speed range from: 47.5 rpm - Spindle speed range up to: 2120 rpm - Spindle diameter: 60 mm - Space requirement (left/right): 2000 mm - Space requirement (front/back): 750 mm - Overall height: 2160 mm - Total weight approx.: 2500 kg The machine is partially overhauled. Dodsvmtlhspfx Aayjku - Vertical and cross adjustment have been renewed.

Kondisi: sangat baik (bekas), en-001 Dkodpfxodg Itns Aaysu

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Kapasitas bor: 35 mm, Dudukan spindel bor: MK4, Gerak pinol: 285 mm, Jangkauan: 300 mm–1000 mm, Kecepatan: 2500 rpm, Lengan: 500 mm, Jarak spindel ke pelat dasar: 1000 mm, Dimensi pelat dasar X/Y: 1150 mm/780 mm. Peninjauan di lokasi memungkinkan. Dkedow Nq Suspfx Aayju

Kondisi: sangat baik (bekas), Horizontal boring supports (qty.) 1 (adjustable / rotatable 0° - 180°) Boring units per horizontal boring support (qty.) 1 Spindles per horizontal boring unit (qty.) 29 Max. working width (mm) approx. 1000 Upper vertical workpiece clamps (qty.) 3 Total connected load (kW) approx. 3 Dsdpfxohgbhce Aayjku

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Kapasitas pengeboran: 55 mm, jarak lengan: 1600 mm, dudukan spindle: MK5, langkah spindle: 400 mm, kecepatan: 1800 rpm, feeding: 1,5 mm/putaran, dimensi meja X/Y: 1500 mm/800 mm, dimensi mesin X/Y/Z: sekitar 2800 mm/1000 mm/3000 mm, berat: sekitar 5500 kg. Inspeksi di lokasi memungkinkan. Dkedpfxew Na E Ds Aayou

Kondisi: sangat baik (bekas), CNC-controlled Throughfeed Boring and Dowel Inserting Line (3 machines) J06031) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) Dodpfjg Urn Ejx Aayoku - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps + No. 2 endless screws for chip removal J06032) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps - No. 2 endless screws for chip removal J06033) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 4 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 4 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control (Software: Tooling System + Woodmaster) CNC controls movement (X-axis and Hv) of the 2 horizontal boring units CNC controls movement (X-axis) of vertical boring units CNC controls movement (Y1 and Y2 axes) of drilling units + (Y-axis) of stops CNC controls movement (X-axis) of workpiece clamps CNC controls movement (X-axis) of conveyor belts

Kondisi: sangat baik (bekas), CNC-controlled (automatic) throughfeed drilling line. Also suitable for NARROW PARTS, min. width 100 mm W05024F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); Dksdeu Tp Slepfx Aayou - No. 6 top vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control – PC DESK TOP (module editor) – Tooling System software W05024G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 3 upper drilling supports (each with drilling heads, 2.3 kW each, each with various drilling heads); - No. 6 top vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); Dkjdpfx Ast Ig A Soayeu - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) Dodpfx Asvnq Txoayoku - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction