Beli Fz 08 bekas (4.464)

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Sama sekali tidak ada masalah! Siap pakai segera! Pengiriman memungkinkan! Gedpfx Ahsyr Srbj Robi

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul: 2017 Operating hours: approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115° Water-cooled motor spindle D, 15,000 rpm Travel paths X 450 mm / Y 270 mm / Z 310 mm Rapid traverse in X / Y / Z: 75 m/min / Acceleration X 1g / Y 1.5g / Z 2g 40 tool positions HSK-A 40, chip-to-chip time 2.6 sec. vertical (to DIN) Additional equipment: Prepared for bar machining Rotary table package AWU 160 with D105 mm (indexing axis) Hainbuch Spanntop D100 collet chuck, 6th side additional device Part handling and discharge system for finished parts Bar feeder IRCO SiMag 100.1-3000 (round and profile material) Coolant gun, machine prep for high-pressure internal coolant (IKZ) 70 bar (variable valve), fixture flushing Scraper belt chip conveyor with discharge height 1050 mm Vacuum rotary filter VRF 400 l (KNOLL MAHLE twin-changeable filter) Electrical cabinet cooler, signal tower Tool life monitoring Tool breakage detection Single F500 3D probe system Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO bar guide sets and Hainbuch collets (as agreed) HSK-A40 toolholders Spare parts for this machine type, including special operating fluids Note on machine concept: Unmanned complete machining of cubic workpieces 24/7. Material supply via bar feeder D100 / 3000 mm for round and profile materials. Rotary table as positioning axis and machining of the 4 surrounding sides via vertical milling spindle. End face machining (5th side) horizontally with swivel head. Clamping of the workpiece via chuck, part separation, and 180° rotation, machining of the 6th side also horizontally with swivel head. Part removal and discharge system to parts storage. Note on machine condition: The machine was factory overhauled and technically updated by Chiron (CMS) in 2017. Gbodpjypbmcofx Ah Rei The last spindle replacement was performed in September 2025. The last manufacturer service was carried out in October 2025 (major annual service at 4,000 h). The machine has been continuously maintained, repaired, and kept up to date by the manufacturer under a full-service contract (preventive maintenance) from purchase until today.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Data teknis ditampilkan pada gambar. Gbodpsyk E Dbjfx Ah Rji

Kondisi: baik (bekas), Tahun pembuatan: 2014, de–hu–001 Gbsdpfxjykufhj Ah Rsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Dijual sebuah pusat pemesinan Chiron tipe FZ 08 W yang berfungsi dengan baik. Gjdpfx Aox Swg Sjh Rebi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 14.300 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 414-46, en Gbsdpfx Ahoxqmwbj Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jam operasional: 9.100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 414-38, TECHNICAL DATA Travel ranges ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0.7 / 0.7 / 1.0 g Rapid traverses ; X / Y / Z 40 / 40 / 60 m/min Spindle speed max. 15,000 min-1 Tool holder HSK A 40 Milling performance in St 60 up to 60 cm3/min Drilling performance in St 60 up to dia. 16 mm Thread cutting up to M12 Chain magazine / tool positions 24 – special up to 40 Tool change time approx. 0.8 sec. Gbedpjkx Ek Tsfx Ah Rei Chip-to-chip time approx. 2.2 sec. 5-axis version - NC rotary swivel table +/- 100° - Face plate diameter 100 mm - Grid drilling pattern M6 x 50 mm - 4th axis speed 40 min-1 - 5th axis speed 60 min-1 - Direct measuring system for 4th/5th axis +/-20’’ / +/-20’’ - Distance spindle mount – table surface 170 – 450 mm - Max. transport load 6 kg specifications are subject to change or error

Kondisi: baik (bekas), chiron-fz-08-ks-magnum Godpfxoxx U Nze Ah Robi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 22.500 h, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, produsen pengendali: SIEMENS, model controller: 840D, kecepatan spindel (maks.): 15.000 rpm, jumlah sumbu: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It is equipped with a Siemens 840D control unit and features impressive travel ranges of 450 mm on the X-axis, 270 mm on the Y-axis, and 310 mm on the Z-axis. The machine offers a 40-position tool changer and a high-pressure coolant system. If you are seeking top-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining center we have available for sale. Please contact us for further details. • Overhauled: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last spindle replacement: September 2025 • Last maintenance: Comprehensive annual service (4,000 h) in October 2025 • NC swivel head range: -20° / +115° • Rapid traverse X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool changer: 40 positions, HSK-A40 Gedpsypb Tpjfx Ah Rjbi • Chip-to-chip time: 2.6 s (vertical) • Rotary table: AWU 160 with D105 mm positioning axis • Operating hours: approx. 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar feeder: IRCO SiMag 100.1-3000 for round and profile material • High-pressure coolant: 70 bar with Vario valve • Coolant filtration: Knoll VRF, 400-liter vacuum rotary filter • Chip conveyor: scraper belt, 1,050 mm discharge height • Measuring/Monitoring: Renishaw TS27R 3D probing system; tool life monitoring; tool breakage detection • Collision monitoring: Brankamp Marposs CMS 100 • Guide channel sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool holders: approx. 500 HSK-A40 units • Spare parts: Supplied for this machine type • Operating materials: Specific consumables/materials included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, de Godpfx Aeyq Nyyoh Rsbi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, b1e90960 Gsdpoyn Nz Eofx Ah Robi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Sumbu X: 300mm, sumbu Y: 250mm, sumbu Z: 250mm, kecepatan rapid (X/Y/Z): 40/40/60 m/menit, waktu chip-to-chip: 1,5 detik, ukuran bidang penjepit: 2x 550x300mm, kecepatan spindle maksimum: 15.000/menit, torsi: 23Nm, dudukan alat: HSK-A32, jumlah alat: 12, pengganti alat: Pengganti tipe keranjang CHIRON, kontrol: GE Fanuc Series oi-MC. Inspeksi di lokasi memungkinkan. Gjdpfx Ahew T Su Sj Rebi

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 9.911 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, de Gjdpfx Ahox Iiw Ij Rjbi

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Dijual 2 mesin CNC milling Chiron FZ 08K W, tahun pembuatan 2011 termasuk sistem pemuatan otomatis – sel lengan robot. Mesin-mesin dalam kondisi sangat baik, terawat secara rutin dan siap pakai segera. Menawarkan presisi, keandalan, dan desain yang kompak – ideal untuk produksi massal. Gjdpfx Ahjw Rba Sj Rjbi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 450 x 270 x 310 [mm] - Rapid traverse speed (X/Y/Z): 75 [m/min] SWIVEL AXIS B - Travel: -20/+115 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 20 SWIVEL AXIS A - Max. bar diameter: 32 [mm] - Minimum resolution: 0.001 [degrees] - Travel: 360 [degrees] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 17 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 1,500 x 2,600 [mm] - Machine height: 2,300 [mm] - Machine weight: 5,100 [kg] MACHINE HOURS Gbjdpfx Ahsuhbtqo Rsi - Operating hours: 20,749 [hours] ACCESSORIES - Control: Fanuc 31i-A5 - Interfaces: USB, PCMCIA, RJ45 - Fire extinguishing system *: KRAFT&BAUER FB703 * Note: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer. - Coolant tank - Spindle cooling - Oil mist extraction: HIFI FILTER - Tool measurement probe: Renishaw TS27R - Workpiece measurement probe: Renishaw OMP40 - System for 6th side machining - Collet chuck: ORTLIEB KSF 30-50 - Tool identification via RFID scan: BALLUFF BIS C-650 - Tool holders: 30

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel: -20/+90 degrees - Minimum resolution: 0.001 degrees TOOL CHANGER - Tool changer type: Parapluie (umbrella-type) - Number of tools in magazine: 40 TURNING SPINDLE - Spindle speed: 8,000 rpm - Max. bar diameter: 32 mm - Minimum resolution C-axis: 0.001 degrees - Travel: 360 degrees ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS Gbedpfxeuhbr Te Ah Rei - Footprint: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 2,850 kg MACHINE HOURS ACCESSORIES - Control: Siemens 840 D - 3-color status light

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 250 mm, produsen pengendali: FANUC, model controller: 21i-M series, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 3.700 W, jumlah sumbu: 3, CHIRON FZ08W 3-sumbu ini diproduksi pada tahun 2006. Pusat pemesinan vertikal CNC ini dilengkapi dengan kontrol Fanuc seri 21i-M dan menawarkan perjalanan sumbu X, Y, dan Z masing-masing sebesar 300 mm, 250 mm, dan 250 mm. Memiliki ukuran meja 550 x 300 mm, kecepatan spindle 10.000 rpm, serta majalah alat dengan 12 posisi. Manfaatkan kesempatan untuk membeli pusat pemesinan vertikal CHIRON FZ08W ini. Hubungi kami untuk informasi lebih lanjut. • Kondisi: Bekas • Kondisi: Baik • Ukuran meja: 550 x 300 mm • Beban maksimum: 200 kg • Majalah alat: 12 posisi Gjdpoygl D Hofx Ah Rebi Perlengkapan tambahan • Sistem ekstraksi serbuk sisa

Kondisi: bekas, berat muatan maksimum: 2.217 kg, berat keseluruhan: 2.600 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 05/2025, panjang ruang muatan: 3.660 mm, lebar ruang muat: 1.750 mm, tinggi ruang muatan: 350 mm, lebar total: 1.810 mm, tinggi total: 930 mm,

Kondisi: bekas, berat muatan maksimum: 1.530 kg, berat keseluruhan: 2.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 01/2025, panjang ruang muatan: 2.760 mm, lebar ruang muat: 1.500 mm, tinggi ruang muatan: 1.600 mm, lebar total: 1.565 mm, tinggi total: 1.600 mm,

Kondisi: bekas, berat muatan maksimum: 1.090 kg, berat keseluruhan: 1.300 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 01/2025, panjang ruang muatan: 2.300 mm, lebar ruang muat: 1.510 mm, tinggi ruang muatan: 1.560 mm, lebar total: 1.580 mm, tinggi total: 300 mm,

Kondisi: bekas, berat muatan maksimum: 622 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 01/2025, panjang ruang muatan: 2.500 mm, lebar ruang muat: 1.140 mm, tinggi ruang muatan: 355 mm, lebar total: 1.845 mm, tinggi total: 900 mm,

Kondisi: bekas, berat muatan maksimum: 1.449 kg, berat keseluruhan: 2.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 10/2023, panjang ruang muatan: 3.200 mm, lebar ruang muat: 1.960 mm, tinggi ruang muatan: 1.940 mm, lebar total: 2.095 mm, tinggi total: 2.510 mm,

Kondisi: bekas, berat muatan maksimum: 649 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 03/2026, panjang ruang muatan: 2.100 mm, lebar ruang muat: 1.100 mm, tinggi ruang muatan: 650 mm, lebar total: 1.555 mm, tinggi total: 900 mm,

Kondisi: bekas, berat muatan maksimum: 660 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 01/2025, panjang ruang muatan: 2.011 mm, lebar ruang muat: 1.100 mm, tinggi ruang muatan: 1.125 mm, lebar total: 1.510 mm, tinggi total: 1.125 mm,

Kondisi: bekas, berat muatan maksimum: 1.995 kg, berat keseluruhan: 2.600 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 03/2026, panjang ruang muatan: 2.760 mm, lebar ruang muat: 1.510 mm, tinggi ruang muatan: 300 mm, lebar total: 1.569 mm, tinggi total: 642 mm,