Beli Ddr Smalcalda Pengeboran Mesin bekas (76.970)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, mesin bor kaca horizontal Dcedpfx Ajyub Azsg Dsg dengan meja rol yang dapat diperpanjang, 700 mm Ukuran mesin: Panjang: 1850 mm, Tinggi: 1800 mm, Kedalaman: 1200 mm

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), c437c7f2 Dcodpfxsytgpkj Ag Deg

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 Dodsq Ii Dlepfx Ag Dscg - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: bekas, nomor mesin/kendaraan: 006158, Maximum panel width: 1000 mm Maximum panel length: 2500 mm Number of injectors: 14 Positioning via NC control: yes Dcodpoiwptuefx Ag Djg

Kondisi: bekas, Tahun pembuatan: 1971, en-Technische Details: Max. facing diameter: approx. Ø 900 mm Spindle speed: 12.5 - 600 / 24 steps rpm Faceplate speed: 8 - 190 / 12 steps rpm Feed rates (faceplate): 0.03 - 3 mm/step Rapid traverse (all axes): 2000 / 4000 mm/min Tool holder (work spindle): ISO 50 / SK50 Clamping surface (table): 700 x 800 mm Table rotatable: 360° Cross travel (drilling table): 800 mm Max. table load: 1,500 kg Total power requirement: approx. 11.0 kW Machine weight: approx. 7,800 kg Machine dimensions (LxWxH): 3.0 x 2.0 x 2.6 m Control cabinet dimensions: 1,800 x 400 x 1,950 mm Faceplate diameter: 420 mm Faceplate slide travel: 180 mm Max. facing diameter: approx. 900 mm Column longitudinal travel: 700 mm Dcsdpfx Asu Idtpeg Dog Vertical travel (spindle head): 700 mm Feed drive for column, spindle head and clamping table: - In spindle operation: 0.20 - 10 mm/rev with 34 steps - In faceplate operation: 0.16 - 16 mm/rev with steps Equipment: Heidenhain optical fine measuring system/axis travel measurement system for X/Y/Z/C-table Hydraulics Machine leveling feet/base plates Operator control panel with pendant arm *

Kondisi: baru, Bernardo Gear-driven Drill Press GB 28 S Technical Specifications - Maximum drilling capacity: 28 mm - Maximum tapping capacity: M12 - Drill chuck: 1 - 13 mm / B 16 - Morse taper: MK 3 - Spindle speed (12 steps): 75 – 3200 rpm - Throat depth: 250 mm - Max. distance spindle / table: 810 mm - Distance spindle / base plate: 1210 mm - Quill stroke: 130 mm Dodpfx Ajd Du T Asg Dscg - Column diameter: 100 mm - Table working area: 325 x 330 mm - Table size / T-slot size: 375 x 375 mm / 14 mm - Motor rated output S1 100%: 0.85 / 1.1 kW (400 V) - Motor input power S6 40%: 1.1 / 1.5 kW (400 V) - Machine dimensions (W x D x H): 450 x 600 x 2020 mm - Weight approx.: 215 kg Scope of delivery • Hardened geared drill chuck 1 – 13 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2 • Automatic tool ejector • Tapping device • Forward/reverse drive function • Height-adjustable safety guard • LED machine work light

Kondisi: baru, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Maximum face mill diameter: 80 mm Throat: 280 mm Spindle speed (12 steps): 75 – 3200 rpm Spindle taper: MT 4 Quill travel: 120 mm Quill feed rates (3): 0.10 / 0.18 / 0.26 mm/rev Table dimensions: 730 x 210 mm T-slot size: 14 mm Max. spindle-to-table distance: 640 mm Max. spindle-to-baseplate distance: 1190 mm Dcodpfx Agogd H Uxe Dsg Travel (x / y): 495 / 200 mm Milling head swiveling: -90° to +90° Milling head vertical adjustment: 260 mm Column diameter: 115 mm Baseplate working surface: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of delivery • Quick-action drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Drawbar M 16 • Reducing sleeve MT 4 / 3 • Combination shell end mill arbor MT 4 / 27 mm • Automatic quill feed • Height-adjustable safety guard • Digital quill position display • Tapping function • Coolant system • LED machine light • Longitudinal scale • Service tools

Kondisi: baru, Bernardo GB 35 THS Gear-driven Drilling Machine Technical Specifications - Drilling capacity in steel: 35 mm - Drilling capacity in cast iron: 40 mm - Maximum thread cutting: M24 - Drill chuck: 1 – 13 mm / B16 - Morse taper: MK 4 - Spindle speed (12 steps): 43 – 2,355 rpm - Feed rate range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev - Throat depth: 340 mm - Max. distance spindle to table: 580 mm - Distance spindle to base plate: 1,185 mm - Quill travel: 200 mm Dcodpfsd Du Twsx Ag Deg - Column diameter: 160 mm - Table size / T-slot size: 540 x 440 mm / 14 mm - Working area base plate: 430 x 440 mm - Motor power: 1.3 / 1.8 kW - Machine dimensions (W x D x H): 660 x 900 x 2,240 mm - Weight approx.: 553 kg Scope of Delivery • Drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 • Motorized table elevation • Electromagnetic spindle feed • Initial fill with Shell Tellus 46 • Automatic tool ejector • Thread cutting device • Digital speed display • LED machine lamp • Coolant system • Digital drilling depth display • Height-adjustable safety guard

Kondisi: baru, Bernardo drilling and milling machine KF 60 including 3-axis digital display and y-axis feed Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Tapping capacity (max): M 16 Throat depth: 210 - 550 mm Spindle head swivel range: 90° Spindle speed (8): 115 - 1750 rpm Spindle taper: ISO 40 Quill stroke: 125 mm Table size: 800 x 240 mm T-slot size: 16 mm Tilting table: -45° to +45° Distance spindle / table: 120 - 375 mm Longitudinal travel (x): 375 mm Dcjdpfx Agsd Du Tlj Djg Cross travel (y): 175 mm Vertical travel (z): 255 mm Motor output S1 100%: 0.85 / 1.5 kW Motor input S6 40%: 1.1 / 2.2 kW Machine dimensions (W x D x H): 1300 x 1400 x 2100 mm Weight approx.: 750 kg Scope of delivery: • 3-axis digital readout i200 with LCD display • Drawbar M 16 • LED machine lamp • Coolant system • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reduction sleeve MK 3/2 • Height-adjustable safety guard • Automatic milling table feed on x-axis • Automatic milling table feed on y-axis

Kondisi: baru, Bernardo GB 30 Vario Gear-Driven Pillar Drill Technical Specifications - Drilling capacity in steel: 32 mm - Drilling capacity in cast iron: 35 mm - Maximum tapping capacity: M22 - Drill chuck: 1 – 13 mm / B 16 - Morse taper: MK 3 - Spindle speed (2 ranges): 70 – 495 / 495 – 3500 rpm - Feed range: 0.1 / 0.2 / 0.3 mm/rev - Throat depth: 280 mm - Max. spindle-to-table distance: 650 mm - Spindle-to-baseplate distance: 1120 mm - Quill stroke: 125 mm - Column diameter: 110 mm - Table size / T-slot size: 450 x 380 mm / 14 mm - Work area baseplate: 340 x 330 mm - Motor output S1 100%: 1.1 kW - Motor input S6 40%: 1.5 kW - Machine dimensions (W x D x H): 500 x 800 x 2100 mm - Approximate weight: 320 kg Scope of Delivery • Drill arbor MK 3 / B 16 • Reducing sleeves MK 3 / 2, MK 3 / 1 Dedpfx Asgd H Uujg Decg • Geared drill chuck 1 – 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Tapping device • Automatic tool ejector • LED machine lamp • Digital speed display • Initial fill Shell Tellus 46 • Height-adjustable safety guard

Kondisi: baru, Bernardo BM 32 SB Column Drilling Machine Maximum drilling capacity: 32 mm Chuck capacity: 1 - 16 mm / B 18 Morse taper: MT 4 Spindle speed: (12) 150 - 2,450 rpm Throat depth: 255 mm Swiveling drill table: 360° Max. distance spindle / table: 750 mm Distance spindle / base plate: 1,210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Base plate working area: 380 x 335 mm Motor output (S1 100%): 1.1 kW / 400 V Motor input (S6 40%): 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1,730 mm Dcsdpfx Aged Tcchj Djg

Kondisi: baru, Bernardo Vario Column Drilling Machine SB 40 Profi Technical Specifications Maximum drilling capacity: 40 mm Drill chuck: 1 – 16 mm / B 18 Morse taper: MT 4 Spindle speed, stepless: 90 – 1455 rpm Throat depth: 320 mm Drill table swivel range: -50° to +50° Maximum spindle/table distance: 590 mm Spindle/base plate distance: 1155 mm Quill stroke: 160 mm Quill feed: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 120 mm Table size / T-slot size: 505 x 425 mm / 14 mm Base plate working area: 360 x 370 mm Motor power: 1.0 / 1.5 kW Machine dimensions (W x D x H): 500 x 930 x 1870 mm Weight: approx. 380 kg Features Vario drive for precise speed adjustment Quill feed can be selected: manual or mechanical feed Easy tool change via automatic tool ejector Set speed easily and quickly readable via digital display Heavy-duty, swiveling cast iron table with T-slots and coolant channel Coolant system and lighting included in delivery Adjustable drilling depth stop, drilling depth readable via scale Right- and left-hand rotation for thread cutting Scope of Delivery Drill chuck arbor MT 4 / B 18 Coolant system Digital speed display Keyless drill chuck 1 – 16 mm / B 18 Reducing sleeves MT 4 / 3, MT 4 / 2, MT 3 / 1 LED machine lamp Dcedpfx Agjd Hxk Nj Djg Automatic tool ejector Height-adjustable safety guard

Kondisi: baru, en_Bernardo GB 35 Vario Gearhead Drilling Machine Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Maximum tapping capacity: M24 Drill chuck: 1 - 13 mm / B 16 Morse taper: MT 4 Spindle speed / 2 ranges: 65 - 460 / 460 - 3250 rpm Feed range: 0.1 / 0.2 / 0.3 mm/rev Throat depth: 320 mm Max. spindle-to-table distance: 580 mm Spindle-to-base distance: 1145 mm Quill travel: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Base working area: 365 x 370 mm Motor output (S1 100%): 1.5 kW Motor input (S6 40%): 2.2 kW Dcjdsd Du Tyspfx Ag Djg Machine dimensions (W x D x H): 600 x 870 x 2170 mm Weight approx.: 375 kg Scope of delivery • Key-type drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Reducing sleeves MT 4 / 3, MT 4 / 2 • Coolant system • Tapping device • Electromagnetic spindle feed • Automatic tool ejector • LED machine light • Initial fill with Shell Tellus 46 • Digital speed display • Height-adjustable safety cover

Kondisi: baru, Column Drilling Machine Bernardo GB 35 HSV with Coolant System Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B 16 Morse taper: MT 4 Spindle speed (12): 75 – 3200 rpm Feed range: 0.10 / 0.18 / 0.26 mm/rev Throat depth: 295 mm Max. spindle-to-table distance: 775 mm Spindle-to-base distance: 1185 mm Quill stroke: 125 mm Column diameter: 115 mm Table size: 500 x 455 mm T-slot size: 14 mm Base working surface: 375 x 365 mm Motor output (S1 100%): 1.1 / 1.5 kW (400 V) Motor input (S6 40%): 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 630 x 700 x 2050 mm Weight: approx. 340 kg Scope of delivery: - Keyless drill chuck 1 – 16 mm / B 16 Djdpfsd Hbwiox Ag Djcg - Drill chuck arbor MT 4 / B 16 - Coolant system - Reducing sleeve MT 4 / 3 - Height-adjustable safety guard - Digital drilling depth display - Thread cutting device - LED machine lamp - Operating tools

Kondisi: baru, Bernardo Drilling and Milling Machine FM 50 HSV including 3-axis digital display Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat: 220 mm Spindle speed (12): 75 – 3200 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed (3): 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Swiveling milling head: -60° to +60° Spindle-to-table distance: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: • 3-axis digital readout i200 with LCD display • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MT 4 / B 16 • Drawbar M 16 • Reducing sleeve MT 4 / 3 • Combination cutter arbor MT 4 / 27 mm • Height-adjustable safety guard • Automatic quill feed • Milling head feed motor • LED machine lamp • Digital quill stroke indicator Dsdpfx Aod Du Tfeg Decg • Tapping device • Accordion safety cover • Longitudinal scale • Operating tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Control system: Heidenhain TNC 310 Accessories included Working area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Main drive Infinitely variable spindle speed: 20 – 4,500 rpm, programmable Dcedpsp H S Uxefx Ag Djg Tool holder: SK 40 Work table B/C-axis drive: manual Clamping surface: ø 700 x 500 mm T-slot pitch/size: 63/14H7 mm Rotational range: 360° Swivel range: +95 / -10° Dimensions Length: 1800 mm (750 mm control unit) Depth: 1800 mm Machine weight: 2,600 kg

Kondisi: baru, Tahun pembuatan: 2026, Our XZ 6350ZB Milling and Drilling Machine guarantees both reliability and precision. Featuring a straightforward and robust design, this machine ensures trouble-free operation for extended periods. Equipped with both a horizontal spindle and a vertical head, the XZ 6350ZB stands out for its versatility. Machine Features: Dsdpfxevxg T As Ag Djcg - Vertical Head and Horizontal Spindle: The XZ 6350ZB is fitted with both a vertical head and a horizontal spindle, offering a broad spectrum of machining capabilities. - ISO 40 Tool Taper: Stable and reliable tool clamping is ensured with the ISO 40 taper, guaranteeing high-precision operations. - Power Feed and Rapid Traverse: The machine is equipped with power feeds on the X and Y axes, and a rapid traverse setting feed on the Z axis, enabling precise adjustments and efficient workflow. - Extendable Vertical Spindle: The extendable vertical spindle ensures easy access to the workpiece, making the machine intuitive and convenient to operate. - Mechanical Feed and Automatic Thread Cutting: Three-range mechanical feed and automatic thread cutting enhance machining flexibility. - Swiveling Vertical Head and Extendable, Rotating Upper Beam: The vertical head swivels 0–90°, while the upper beam can be extended and rotated, further increasing operational precision and versatility. Choose our XZ 6350ZB milling and drilling machine and benefit from a comprehensive service package including warranty, Polish-language manual, professional servicing, and convenient delivery. We are prepared to meet your machining needs, providing not only high quality but also complete customer support. Technical Details: WORK TABLE DIMENSIONS 1270 mm x 260 mm TABLE TRAVEL X/Y/Z 710 / 320 / 360 mm NUMBER OF T-SLOTS IN TABLE 5 DISTANCE BETWEEN SLOTS 50 mm MAX. TABLE LOAD 200 kg VERTICAL HEAD Swiveling 90° SPINDLE Extendable, L = 120 mm SPINDLE TAPER ISO 40 MECHANICAL SPINDLE FEED 0.08–0.15–0.25 mm/rev VERTICAL SPINDLE SPEED RANGE 90–2000 rpm HORIZONTAL SPINDLE SPEED RANGE 40–1300 rpm LONGITUDINAL FEED RATE RANGE 24–402 mm/min CROSS FEED RATE RANGE 24–402 mm/min RAPID TRAVERSE Rapid setting for Z axis UPPER BEAM EXTENSION 460 mm DISTANCE SPINDLE TO COLUMN (VERTICAL) 260–740 mm DISTANCE SPINDLE TO TABLE (VERTICAL) 100–440 mm DISTANCE SPINDLE TO TABLE (HORIZONTAL) 0–300 mm DIGITAL READOUT 3 axes MAIN MOTOR POWER 2.2 kW / 3 HP OVERALL DIMENSIONS 1520 x 1289 x 2150 mm WEIGHT 1420 kg

Kondisi: baru, Tahun pembuatan: 2026, The ZX7045 B1 DRO milling-drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for screws up to M12 mm. With a milling capacity of up to 80 mm (width) and keyway cutting up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features an automatic spindle feed, increasing work efficiency. Additionally, it is equipped with a digital readout for enhanced precision and a coolant system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals who demand high quality and performance in metalworking. Product Features: - HEAVY-DUTY, STABLE CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTARY HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Base available as an optional accessory TECHNICAL DATA: - DRILLING CAPACITY IN STEEL: 32 mm - DRILLING CAPACITY IN CAST IRON: 45 mm - FACE MILLING CUTTER DIAMETER: 80 mm - END MILL DIAMETER: 28 mm - SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) - SPINDLE TAPER: MT 4 - SPINDLE STROKE (AUTOMATIC FEED): 125 mm - WORK TABLE DIMENSIONS: 820 mm x 240 mm - BASE DIMENSIONS: 580 x 600 mm - MAX. DISTANCE SPINDLE TO TABLE: 445 mm - DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm - TRAVEL X/Y/Z: 515/175/430 mm - QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev Dcjdpfoud H H Uex Ag Dsg - HEAD ROTATION LEFT/RIGHT: 90° - MOTOR POWER: 1.8 kW (2.5 HP) - POWER SUPPLY: 400 V - WEIGHT: 350 kg Available Accessories: - MK4/B18 drill chuck arbor - Digital readout - Service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Kondisi: baru, Tahun pembuatan: 2026, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, perfect for small and medium-sized maintenance and production departments. This mid-size machine not only offers vertical head power feed, but also tapping capabilities and a standard digital readout. Product Features Standard Readout: Discover the reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy-Duty Cast Iron Frame: The robust cast iron construction ensures durability and precision. The ZX 7055 DRO milling and drilling machine maintains stability even during the most demanding tasks. Automatic Feed: Save time and increase productivity with automatic feed. The vertically driven head allows for efficient material processing without the need for constant supervision. Massive Precision-Ground Cross Table: Attention to detail is key in the design. The heavy-duty, precision-ground surface cross table ensures excellent flatness, translating to precise machining. Dovetail Guideways: Innovative dovetail guideways ensure smooth and precise movement across three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gears: Focus on your work, not the noise. Ground gears guarantee quiet operation, improving working comfort. Djdoud H Thepfx Ag Dscg Left and Right Spindle Rotation: Adapt the machine to your needs. The ability to rotate both directions provides added flexibility in machining processes. Swiveling Head +/- 90° and Adjustable Head Height: Tackle various tasks with a head that swivels +/- 90° and adjustable head height. Achieve precise results in every situation. The ZX 7055 DRO milling and drilling machine is a modern tool that will redefine your material processing experience. Order today and experience outstanding performance in your workshop! MAXIMUM FACE MILL DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD SWIVEL ANGLE +/- 90° SPINDLE SPEEDS 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEEDS 0.1; 0.18; 0.26 rpm SPINDLE TAPER MT4 SPINDLE TRAVEL 125 mm (automatic feed) TABLE DIMENSIONS 1000 x 240 mm TABLE TRAVEL X/Y 670 x 185 mm T-SLOT SIZE/DISTANCE/NUMBER 18 mm / 80 mm / 3 DISTANCE SPINDLE TO TABLE 90 - 460 mm DISTANCE SPINDLE TO COLUMN 235 mm MOTOR POWER 1.5 kW / 2.1 HP SUPPLY VOLTAGE 400 V WEIGHT 425 kg PACKAGE DIMENSIONS 970 x 760 x 1160 mm Standard Equipment - Automatic spindle feed - Digital readout - Longitudinal table power feed with speed adjustment - Electrically powered spindle head height adjustment - Coolant system

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, High-precision drilling and milling machine Aciera 22 VA Good condition, previously used in educational facility Year of manufacture: approx. 1990 Table size: 600 x 320 mm Spindle speed: 40 - 3600 rpm Spindle speed selection (rpm): 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter: 65 mm Quill stroke: 120 mm Spindle mount: Aciera Quick-change system Automatic thread cutting Drilling capacity in solid material: 25 mm Maximum drilling capacity: up to 30 mm Height adjustment via hand crank Dcjdpfx Aehqm D Nsg Dog Motor: 1.1 kW Lamp Several quick-change holders included Dimensions (W x D x H): 90 x 130 x 185 cm Weight: approx. 800 kg Technical specifications subject to change

Kondisi: baik (bekas), Tahun pembuatan: 1977, werkstueckgewicht-lager-2024-07-05 Dodpsrfd U Rofx Ag Decg

Kondisi: bekas, Tahun pembuatan: 1996, Lintasan x 850 mm Lintasan y 630 mm Dcodouxfz Ajpfx Ag Dog Lintasan z 500 mm Kontrol Heidenhain Kebutuhan daya total 16 kW Kebutuhan ruang sekitar 5 x 4,2 m

Kondisi: baik (bekas), en-001 Dcodpfxswiucfo Ag Dog

Kondisi: siap digunakan (bekas), Max. speed: 2000 rpm, with operating manual. Dedpslbmtgofx Ag Dscg

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A CNC fixed-table milling and drilling center Bimatec Soraluce is available. Travel distances X/Y/Z: 2500mm/900mm/1600mm, spindle speed: 2000 rpm, spindle taper: ISO40/M16, tool stations: 30. Transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13,500kg, control unit: Heidenhain CNC 415, operating hours: 31,507 h. Includes fixed table, moving column, automatic indexing milling head, manual touch probe, coolant system, and filtration unit. Documentation is available. Inspection on site possible. Dcodeu T Rgwepfx Ag Dog