Beli Deckel Fp 50 Cc bekas (670)

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used, well-maintained CNC-controlled tool milling machine in travelling column design, equipped with GRUNDIG Dialog 11 CNC path control Table size: 1600 x 675 mm Tool holder: SK / ISO 40 Travel paths: X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load capacity: 2000 kg Spindle speed range: 20 – 6300 rpm Feed range, stepless: 2 – 10,000 mm/min Rapid traverse (all axes): 10 m/min Quill stroke: 80 mm Drive power 100% duty cycle: 7.5 kW 40% duty cycle: 12 kW Machine dimensions (L x W x H): 3600 x 3000 x 2300 mm Machine weight: 6800 kg Control cabinet dimensions: 1700 x 900 x 1750 mm Iiedpohhuf Hjfx Aahsk Control cabinet weight: 470 kg Accessories / Special Features: • CNC tool milling machine suitable for tool and jig construction, training, and mould-making applications • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input supported by graphics, “contour pocket” milling cycle for automatic rough-milling of irregular pockets, including those with islands, coordinate system offset and rotation • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling device • Fully enclosed safety cabin • Ball screw spindles in all 3 axes • Coolant system • Machine lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, spindle speed: 6300rpm, feed rate: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The monitor and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. An on-site inspection is possible. Iiodpfxowzbbls Aahsk

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1990, Suku cadang untuk mesin frais CNC, pabrikan DECKEL FP5CC/T th. 1990. Suku cadang seperti: kontrol DIALOG 11, lemari listrik lengkap, spindle frais vertikal & horizontal ISO 40, meja universal miring-putar, majalah alat dengan penukar, konveyor serpihan, motor, dll. Silakan ajukan permintaan sesuai kebutuhan. Iiedpfefgvu Ujx Aahjk

Kondisi: baik (bekas), Tahun pembuatan: 1998, The machine is dirty. Technical condition: good. Iedpfx Aaovptmkohsik Rotary and swivel table is installed.

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 36109, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 6.000 m/menit, pergeseran cepat sumbu Y: 6.000 m/menit, pergerakan cepat sumbu Z: 6.000 m/menit, daya nominal (semu): 16 kVA, tinggi total: 2.000 mm, panjang total: 3.000 mm, lebar total: 2.800 mm, lebar meja: 480 mm, panjang meja: 800 mm, beban meja: 530 kg, kecepatan rotasi (min.): 31 rpm, kecepatan rotasi (maks.): 5.000 rpm, berat keseluruhan: 2.800 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Mesin dalam kondisi baik, masih berjalan mulus dan menghasilkan pekerjaan yang presisi. Mesin dapat dilihat dalam keadaan beroperasi. Iodpext Nlysfx Aahoik

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Travel range X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swiveling range B: -15°/45°, rotary range C: 360°, spindle speed: 6300rpm, power: 12kW, tool stations: 40, tool holder: SK40, feed rate: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11. Including chip conveyor and Knoll PF 50 coolant system, year of manufacture: 1989. An inspection on site is possible. Iiodpfewtg Ibex Aahek

Kondisi: baik (bekas), Drilling and milling head for Deckel milling machine Isdpfx Aaev U A S Hehjik

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de_DE Iijdpferzu Stjx Aahjk

Kondisi: baik (bekas), Aksesori dan suku cadang untuk mesin frais Deckel FP: Meja putar 400 mm 31 holder ISO 40 S 20 dengan pisau frais Kepala bor-frais FP2-3 Blok perantara Meja FP2, meja FP3 Ijdex Hpd Eepfx Aahoik Palet dengan aksesori bekas Lemari laci dengan banyak aksesori: Collet panjang 328E 31 buah, collet MK4 9 buah, adaptor ISO 40-MK4, holder ISO 40 panjang 16 buah. Cincin penggerak, dudukan khusus ISO 40 S 20 1 set, collet 462 E. Laci berisi bush, kaki mesin, penahan balik, dll. dijual sebagai satu paket

Kondisi: baik (bekas), No. Artikel internal: 25094 Iedpfjxxkwnex Aahoik Mesin Frais Universal Deckel FP1 + Aksesoris (Ragum mesin / kepala pembagi / adaptor SK40 / penyangga belakang) Pada kepala frais terpasang drawbar M16 + Selain itu, tersedia drawbar S20x2 Mesin dapat diperiksa dalam kondisi listrik menyala.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3149- Iiedpfx Aaowxxd Sehok Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guide surfaces are in very good condition. The dimensions of the slotting head can be found in the last picture.

Kondisi: baik (bekas), Tahun pembuatan: 1996, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 380 mm, jarak gerak sumbu Z: 380 mm, kecepatan rotasi (maks.): 18.000 rpm, berat keseluruhan: 4.000 kg, For sale is a 5-axis machining center by DMG MORI, model DMU 50 5. The machine comes from a vocational school, is in good condition, and has been very well maintained. Particularly noteworthy: the spindle has only 2,000 operating hours, 18,000 rpm, and the machine is equipped with a through-spindle coolant system (IKZ). Technical specifications: Year of manufacture: 1996 Operating hours: 35,000 h Spindle replacement at: 33,000 h Spindle hours: 2,000 h Spindle taper: SK 40 Control: Heidenhain Mill Plus Iijdery Tn Espfx Aahjk Max. spindle speed: 18,000 rpm Travel (X/Y/Z): 500/380/380 mm Rotary table: 500x380 mm Installation dimensions (L/W/H): approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg Europe-wide delivery can be arranged upon request for an additional charge. All prices are plus VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your machine? For further information or to get in touch, please visit our website.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Mesin Milling Universal untuk Perkakas Merek: DECKEL Model: FP 1 Aktiv Tahun pembuatan: 1990 – telah diuji di bengkel No. Seri Mesin: 2102-5866 Tipe Kepala Milling: 2171 Nomor Kepala Milling: 4613 Penerimaan geometris dengan protokol pengujian Aksesori: - Tampilan digital aktif 3-sumbu HEIDENHAIN TNC 113 dengan fungsi aktif pada sumbu X, Y, dan Z - Meja universal 590 x 250 mm (alur-T: 12 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 - Tanpa sistem pendingin cairan dapat dipasang jika diperlukan - Pelumasan sentral elektrik - Manual pengoperasian Bekas pakai sesuai kondisi, tanpa garansi Mesin secara teknis sesuai standar tahun pembuatannya. Isdpfxex It Rxo Aaheik

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2351, jarak pergerakan sumbu X: 490 mm, jarak lintasan sumbu Y: 370 mm, kecepatan spindel (maks.): 2.000 rpm, lebar meja: 255 mm, panjang meja: 900 mm, Tanpa harga minimum – penjualan dijamin untuk penawar tertinggi! Mesin dilelang akibat penutupan operasi. Penawaran bersifat mengikat untuk pengambilan tepat waktu antara 26.01.2026 dan 29.01.2026! DETAIL TEKNIS Perjalanan sumbu X: 490 mm Iedpexqm Aqjfx Aaheik Perjalanan sumbu Y: 370 mm Kecepatan spindel: 40 - 2.000 rpm Koneksi alat: SK 40 Gerakan blok spindel otomatis: 290 mm Gerakan blok spindel manual: 300 mm Penyesuaian ketinggian spindel milling secara manual: sekitar 100 mm Dimensi meja: 900 x 255 mm Rentang feeding: 10 - 500 mm/menit Movement cepat: 1.500 mm/menit DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 2.000 x 1.500 x 1.900 mm Berat: 1.500 kg PERLENGKAPAN Layar digital 3-axis Rahang ragum mesin terpasang (lebar rahang 160 mm)

Kondisi: hampir baru (bekas), Dijual mesin frais produksi Jerman, merek Deckel model FP2A, seperti terlihat pada foto. Mesin dalam kondisi sangat baik, seperti baru. Tersegel pada panel kontrol. Siap digunakan. Pengangkutan mesin di lokasi disediakan. Isdpfoxq Rymex Aahjik Spesifikasi mesin: - Kontrol Dialog 11 - Putaran spindle 0–4000 rpm - X 300 mm - Y 300 mm - Z 400 mm Dokumentasi lengkap antara lain: - Buku manual penggunaan mesin - Buku panduan pemrograman - Buku daftar kesalahan dan penjelasannya - Data teknis mesin - Skema kelistrikan Aksesoris mesin: - 2 ragum 150x300 - Probe pengukuran 3D - Alat pengukur panjang alat potong - Set ER 32 - Arbor - Kepala milling

Kondisi: bekas, CNC milling machine DECKEL type FP 3 A Tool milling machine with handwheels, also suitable for manual operation Serial no. 2206 - Year of manufacture: 1982 CNC path control GRUNDIG CNC 2101 Travel distances X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle taper SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, infinitely variable Rapid traverse speed 1200 mm/min Spindle drive motor power 2 / 4 kW, pole-changeable Power connection 380 Volt, 50 Hz - CNC path control GRUNDIG CNC 2101 - Mechanical handwheels for all three axes Iiodpfx Aasv R E Rdehek - Universal swivel, tilt, and rotary table - Vertical milling head swiveling and manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Safety enclosure at front and sides with 3 folding doors - Control cabinet mounted separately (L x W = 600 x 430 mm) Space requirements L x W x H 1900 x 1700 x 1950 mm Weight 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Kondisi: bekas, x-Weg 500 mm y-Weg 200 mm z-Weg 400 mm Tischaufspannfläche 700 x 300 mm Werkzeugaufnahme SK 40 - S20 Vorschub 8 - 400 mm/ min Eilgang in X und Z 1200 mm / min Iiodpjx Hay Defx Aahok Drehzahl 40 - 2000 U/min Gesamtleistungsbedarf 2,2 kW Maschinengewicht ca. 1400 kg Raumbedarf ca. 1500 x 1200 x 1600 mm inkl. 2-Achsen Digitalanzeige Heidenhain

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 420 mm, jarak gerak sumbu Z: 380 mm, model controller: Heidenhain Mill Plus IT, tinggi total: 5.600 mm, panjang total: 9.000 mm, berat keseluruhan: 6.000 kg, For sale is a 5-axis machining centre of the DMU brand, model 50 eVolution. Of particular note is the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical data: Year of manufacture: 2004 Iisdpfx Astyit Esahsk Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx. 500 mm diameter Travel range: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirement as per drawing: 9,000 x 5,600 mm Transport dimensions: 2,800 x 3,700 x 2,800 mm Weight: 6,000 kg Upon request, transport and loading can be organised throughout Europe for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Fzho0bc Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Steuereinheit Marke: HEIDENHAIN Modell: iTNC 530 Allgemeine Daten Maschinengewicht: 3.600 kg Hauptantrieb Spindeldrehzahlbereich: 20 - 10.000 U/min Spindelmotorleistung: 9 / 13 kW Werkzeugaufnahme: SK 40 Achsenanzahl: 5 Verfahrwege X-Achse: 500 mm Y-Achse: 450 mm Z-Achse: 400 mm Zusätzliche Ausstattung Werkzeugplätze: 16 / Max. Werkzeuggewicht: 6 kg / Max. Werkzeuglänge: 300 mm Max. Werkzeugdurchmesser: ohne Nebenbelegung: 130 mm / mit Nebenbelegung: 80 mm Gesamtanschlusswert: 17 kVA Kein Späneförderer enthalten / Kein automatischer Messtaster enthalten / Keine Werkzeuge enthalten Dieses 5-Achs-Bearbeitungszentrum DMG DECKEL MAHO DMU 50 wurde 2005 hergestellt. Es verfügt über eine Heidenhain iTNC 530 Steuerung, einen Hauptspindeldrehzahlbereich von 20 - 10.000 U/min sowie einen Rundtisch mit einer Spannfläche von 630 x 500 mm. Die Maschine wurde umfassend überholt, einschließlich vollständigem Austausch der X-Achsen-Lager und dem Einbau einer neuen Kühlmittelpumpe. Wenn Sie hochwertige Fräsleistungen suchen, ist die hier angebotene DMG DECKEL MAHO DMU 50 eine hervorragende Wahl. Kontaktieren Sie uns für weitere Informationen. Iodjx E D U Aopfx Aahoik Einsatzgebiete Fräsen

Kondisi: baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Detail Teknis Perjalanan x: 300 mm Perjalanan y: 160 mm Perjalanan z: 290 mm Ukuran meja: 210 x 600 mm Tipe pemegang alat: SK 40 Kecepatan spindle (16): 40 - 2000 rpm Feed tak terbatas: 5 - 500 mm/menit Pergerakan cepat: 1,2 m/menit Penggerak spindle: 1,5 / 1,9 kW Kebutuhan daya total: 9,5 kVA Berat mesin sekitar: 730 kg Kebutuhan ruang sekitar: 2000 x 2200 x 1655 mm Informasi tambahan Mesin dalam kondisi sangat baik dan berasal dari bengkel pelatihan. Perlengkapan: Pelindung keselamatan dan lampu LED dipasang tambahan tahun 2016 Display digital aktif 3-sumbu merek Heidenhain Iodpfjx D T Nqox Aaheik Meja sudut tetap Perangkat pendingin

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop tested Machine no.: 53426/08 Geometric acceptance with test protocol Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Steady rest with counter bearing - Operating manual Iedpsflc N Aefx Aahoik - Used, as seen, without warranty -

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 53.776 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 380 mm, diameter meja putar: 500 mm, kecepatan rotasi (maks.): 18.000 rpm, For sale: Deckel Maho DMU 50 eVolution 5-axis simultaneous milling machine The machine is in good condition and immediately ready for operation. Iijdpfx Aaewxd Agshok Technical Data: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0–180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 × 2,400 × 2,500 mm Weight: 5,500 kg Transport and loading can be organized Europe-wide upon request and at additional cost. All prices plus VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machines Purchase / Sales BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact options, please visit our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Unit Kontrol Iijdpfx Aaox D Dukshjk Merek: HEIDENHAIN Model: tidak ada Gerakan Gerakan Sumbu X: 500 mm Gerakan Sumbu Y: 400 mm Gerakan Sumbu Z: 400 mm DECKEL MAHO DMU 50 T ini diproduksi pada tahun 2002. Dilengkapi dudukan spindle SK40 DIN69871, ukuran meja 700x500 mm, dan RPM maksimum 9000. Ideal untuk pekerjaan pemesinan yang fleksibel. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling (Frais)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1978, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance test with inspection protocol Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 Iodpfedf E H Asx Aahoik - Coolant system - Operating manual - Used, as seen -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 4.500 rpm, For sale is a machining center of the brand Deckel Maho, model DMU 50 M, equipped with CNC control and manual rotary axes. The machine is in very good condition, fully functional, and immediately ready for operation. A special feature is the option to operate it in an open enclosure. Iiedpfx Aju Unh Ijahsk Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotary range: 360° (mechanical) Swivel range: +90/-15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request. Transport and loading can be arranged at extra cost, Europe-wide. Prices are subject to VAT. Inspection by appointment is possible. Contact us — our team is happy to assist you. Trade-in or exchange possible! Machine purchase and sales BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.