Beli Deckel Kf2 bekas (702)

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2005, jam operasional: 38.534 h, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 29310001024, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 560 mm, model controller: Heidenhain iTNC530, kecepatan rotasi (maks.): 18.000 rpm, en Bwsdpsy Ib H Iefx Am Iel

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2003, jam operasional: 30.434 h, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 1114 000402 3, jarak pergerakan sumbu X: 1.060 mm, jarak lintasan sumbu Y: 710 mm, jarak gerak sumbu Z: 710 mm, model controller: Heidenhain iTNC530, kecepatan rotasi (maks.): 10.000 rpm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! RINCIAN TEKNIS Perjalanan sumbu X: 1.060 mm Perjalanan sumbu Y: 710 mm Perjalanan sumbu Z: 710 mm Ukuran kerja: Ø800 NC meja putar Kecepatan putar: 10.000 rpm Jumlah sumbu: 5 Penukar alat: 30 posisi Tipe holder alat: HSK63 DETAIL MESIN Kontrol: iTNC530 Dimensi & Berat Dimensi mesin (P x L x T): 4.080 x 4.490 x 3.117,5 mm Dimensi transportasi (P x L x T): 3.500 x 2.500 x 2.410 mm Berat: 9,7 t Bedjy Ib A Nspfx Am Iswl Jam Operasional Jam spindle: 30.434 jam Jam operasi: 66.001 jam Catatan: Suhu mesin langsung naik dan sebelumnya juga sudah pernah mengeluarkan asap. Mesin mengalami kerusakan spindle. Berbagai isolasi kabel sudah aus.

Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2001, de-9947 Bwjdpfx Aoy I A Umjm Ijl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 6.300 rpm, tinggi total: 2.750 mm, berat keseluruhan: 10.200 kg, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, daya motor spindle: 16.000 W, panjang produk (maks.): 6.600 mm, beban meja: 600 kg, jumlah sumbu: 5, en Bwodpfxey I Aquj Am Ijl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 23.198 h, model controller: Millplus V400, jumlah sumbu: 3, en-GB: This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It is equipped with a 24-position tool changer, an NC rotary table, and a spindle speed of up to 6,300 rpm. The machining area is 600 mm in length, 525 mm in width, and 500 mm in height. It features a coolant system with a capacity of 150 litres. Consider the option of purchasing this DECKEL MAHO DMU 60T vertical machining centre. Contact us for further information about this machine. Additional Information Control & Electronics • Control: Millplus V400 • Screen: Colour, text in German/English • Operating voltage: 400 V, 50 Hz • Control voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum spindle speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool holder: ISO 40 - DIN 69871 • Pull stud: DIN 69872 Form A • Tool changer: 24–25 tool positionsWorking Area & Axes • X-axis travel: 600 mm • Y-axis travel: 525 mm Bwedpoy Iwnusfx Am Iol • Z-axis travel: 500 mm • Rapid traverse X/Y/Z: 18 m/min • Feed rate: up to 10,000 mm/min • NC rotary table: 3-axis on fixed tableCooling & Accessories • Coolant system capacity: 150 l • Full enclosure: Yes • Paintwork: Grey/Green (NCS)Documentation: • 2 sets, in German

Kondisi: baik (bekas), Tahun pembuatan: 1986, cnc-deckel-fp5nc-1986 Bwedpfxey H Ifbs Am Ijl

Kondisi: baik (bekas), Tahun pembuatan: 2006, TECHNICAL SPECIFICATIONS Main Drive Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Bsdpfxsu Hkb Rs Am Ijwl Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position Measuring System Resolution C, B, X, Y, Z: 0.001 mm Position tolerance C, B, X, Y, Z: 0.010 mm Working Range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Max. tool diameter without free spaces: 80 mm Max. tool diameter with free spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface, rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: approx. 6,800 kg Operating weight: approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including but not limited to: Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage monitoring system Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the above information.

Kondisi: baik (bekas), Tahun pembuatan: 1988, DECKEL S11 tool grinding machine Bwjdpor Elwkjfx Am Iel - Good condition - Scope of delivery as shown in photos - EXW CH-4528 Zuchwil Technical Data Clamping surface of the tool carriage: 500 x 180 mm Max. tool diameter between centers: 130 mm Max. tool diameter with cantilevered mounting in the universal dividing head: 620 mm Max. tool length between centers: 270 mm T-slot size machine base: 12 mm T-slot size grinding head, tool carriage, and accessories: 8 mm Grinding stroke: 190 mm Grinding stroke for spiral grinding: 190 mm Cross adjustment tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm Tool holder: 220 mm Grinding head support: 800 mm Universal dividing head on tool carriage: 330 mm Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds: stepless 2000 to 12000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760 mm Space requirement: 2.5 x 2.3 m No guarantee is given for the accuracy, completeness, or timeliness of the information.

Kondisi: sangat baik (bekas), stichelschleifmaschine-01 Bodsy Ifc Tspfx Am Iowl

Kondisi: baik (bekas), Nomor Artikel Internal: 26045 Mesin Gerinda Alat Universal Deckel S11 Bodpfx Ajy Ibfqem Iewl + Paket aksesori lengkap + Optik dengan tampilan digital + Sistem hisap debu + Lampu mesin Tinggi pusat kepala pembagi universal: 170 mm Tinggi pusat kepala lepas: 120 mm Diameter benda kerja terbesar antara pusat: 338 mm Diameter benda kerja terbesar dengan penyanggaan melayang: 600 mm Panjang maksimum antara pusat: 950 mm Jarak gerinda: 190 mm Penyesuaian silang dudukan alat: 100 mm Penyesuaian ketinggian kepala gerinda: 325 mm Diameter maksimum roda gerinda: 125 mm Mesin dalam kondisi sepenuhnya berfungsi dan dapat dilihat saat teraliri listrik di gudang berpemanas lebih dari 500 m², dengan perjanjian terlebih dahulu.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Universal – Mesin Frais & Bor DECKEL MAHO DMU 50 M Dengan kontrol Heidenhain TNC 310 Tahun pembuatan: 2001 Perjalanan sumbu: X 500 Y 400 Z 400 Rentang putaran: 20 – 4.500 rpm tanpa langkah Dengan perlengkapan berikut: Meja putar miring manual dengan tampilan digital untuk sumbu C + B Bsdpfsy Id Stjx Am Ijwl Permukaan penjepit 700 mm x 500 mm Handwheel elektronik untuk sumbu X, Y, Z Kabinet pelindung cipratan Lampu mesin 4 pcs kaki mesin yang dapat disetel tinggi Perangkat pendingin media Manual pengoperasian

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: SIEMENS, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 35.000 W, jumlah sumbu: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with an X-axis travel of 750 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of 24,000 rpm and a tool magazine with a capacity of 120 positions. It also includes a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, the DMG DECKEL MAHO DMU 70 EVO Linear we offer for sale is an excellent choice. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping area 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 l • Probe • Chip conveyor • Electronic handwheel (remote control) • DMG PH 150 L8 pallet changer system, 8 stations (pallets not included) Bwedpfx Ameymcvme Iel Technical Specification Taper size HSK 63

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, tsydet1 Bjdjy Idfmspfx Am Iswl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 885 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 90 m/menit, pergeseran cepat sumbu Y: 90 m/menit, pergerakan cepat sumbu Z: 90 m/menit, produsen pengendali: Heidenhain, model controller: iTNC 530, diameter meja putar: 750 mm, kecepatan spindel (maks.): 18.000 rpm, hidung spindel: HSK63, jumlah slot dalam magazin alat: 60, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Machine description: 5-axis machining centre with comprehensive equipment and linear drives on all axes Regularly serviced and fully operational Current operating hours: Program ON: 27,011 h / Machine ON: 57,198 h / Spindle ON: 24,324 h Travels and speeds: X-axis (longitudinal): 885 mm Y-axis (cross): 600 mm Bsdey Hix Nepfx Am Iewl Z-axis (vertical): 600 mm Feed rate in all axes: 90,000 mm/min Clamping table / NC rotary table: NC rotary table diameter: 750 mm Table load capacity: 800 kg Control: Heidenhain iTNC530 with handwheel Spindle and B-axis: Speed range: 50 – 18,000 rpm Tool holder: HSK63 Spindle power: 35 kW (S1) Torque: 80 Nm (S4) NC-controlled B-axis: +110°/-10° Coolant system and chip disposal: External coolant with nozzles: 4 bar Internal coolant: 40 bar External air: yes Internal air: yes Paper belt filter: yes Chip conveyor: yes Automatic tool changer: Tool holder: HSK63 Number of stations: 60 Machine weight: Weight: ~10,900 kg Additional features and accessories: Direct measuring system Heidenhain, ventilated on all axes iR probe by M&H Tool measurement with Blum laser Chip flushing gun Work area rinse system Machine documentation

Kondisi: baik (bekas), clw6d4lwo001f3b6f0bu8biu9 Bedpfey H Itlox Am Iswl

Kondisi: bekas, Tahun pembuatan: 1998, dehu-1 Bwedpfxsw Inrvo Am Ijl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis active TNC 111 Heidenhain digital readout with accessories – Excellent condition Technical data: Bwodpsy H Ibcefx Am Ijl >> Year of manufacture: 1979, Machine-No. 2202-10512 >> Fixed angle table >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel (X/Y/Z): 400/220/400 mm >> Vertical milling head on column adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 111 active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, steady rest, dividing head with 3-jaw chuck, machine vice, steady rest, index plates, and much more About the machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 originates from a government facility’s laboratory where it saw very little use. Included is an accessory cabinet with a wide range of tools. The machine has minimal backlash and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. This newer FP2 model features infinitely variable feeds on all three axes and a rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can input dimensions that the machine will approach automatically. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on-site.

Kondisi: baik (bekas), Tahun pembuatan: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angle table clamping area 700 x 285 mm Travel paths X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Bsdpfx Amjm Uygvs Iswl Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 1990, de-to-hu/it/lt/lv/nb/nl/pl Bodjyq Slxopfx Am Iewl

Kondisi: bekas, Tahun pembuatan: 1990, translation Bodpfjyq Sk Usx Am Iewl

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Compressed air through spindle center, Electric oil mist extraction, Electronic handwheel, TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Bwsdpfxspumdco Am Isl Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 54.900 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.350 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: Heidenhain, model controller: iTNC 530 HSCI, beban meja: 600 kg, kecepatan rotasi (maks.): 18.000 rpm, Perlengkapan: konveyor serpihan, Spindle motor SK 40 Bodpoy Hh T Sefx Am Iewl Penjepit alat untuk HSK-A63 Probe pengukur inframerah IKZ 40 bar Handwheel elektrik iTNC 530

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 5, Mesin 5-sumbu DECKEL MAHO DMU 60T ini diproduksi pada tahun 2001. Mesin ini memiliki pergerakan sumbu X sebesar 630 mm, sumbu Y 560 mm, dan sumbu Z 560 mm. Mesin dilengkapi dengan meja berukuran 1000 x 600 mm serta majalah alat dengan kapasitas 2x12 posisi. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal DECKEL MAHO DMU 60T yang kami tawarkan untuk dijual. Silakan hubungi kami untuk detail lebih lanjut. • Ukuran meja: 1000 x 600 mm • Majalah alat: 2x12 posisi Bwjdpfxey Hktbo Am Iol • Mesin dalam kondisi tersambung listrik dan terawat baik. Spesifikasi Teknis Taper SK 40

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 32.498 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, daya nominal (semu): 35 kVA, produsen pengendali: Heidenhain iTNC 530, lebar benda kerja (maks.): 500 mm, diameter benda kerja (maks.): 630 mm, berat benda kerja (maks.): 200 kg, tinggi total: 2.590 mm, panjang total: 4.780 mm, lebar total: 4.410 mm, berat keseluruhan: 5.900 kg, kecepatan spindel (min.): 18.000 rpm, daya motor spindle: 35.000 W, Year of manufacture: 2010 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 500 Travel Y-axis mm: 450 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0º/108º (0.001) Rapid traverse m/min: 80/50/50 NC milling/turning table: Pallet dimensions mm: Ø390 Max. workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Max. spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40% DC/cont) Spindle torque Nm: 130/87 Cooling Tool system Tool holder: HSK-A 63 Number of tools in magazine: 30 With empty neighboring stations mm: 130 With occupied neighboring stations mm: 80 Max. tool length mm: 300 Chip-to-chip time sec.: 5 Equipment Chip conveyor Bedpfx Asyi Dnijm Iewl Infrared probe Rinsing gun Selectable through-spindle air blast via M-function Signal light Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW probe Automatic door Machine operating hours: Power-on hours: 54,257 Spindle running hours: 32,498 Total power requirement kVA: 48 Basic machine: Dimensions/Weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900