Beli Demag Ac 80 bekas (508)

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 878 0730, gaya penjepit: 2.500 kN, jarak antara tiang: 630 mm, tinggi cetakan (min.): 330 mm, gaya ejektor: 69.000 N, lintasan ejektor: 200 mm, langkah pembukaan: 675 mm, panjang pelat: 950 mm, lebar pelat: 950 mm, panjang total: 6.500 mm, lebar total: 1.900 mm, tinggi total: 2.300 mm, berat keseluruhan: 13.100 kg, kapasitas pemanasan: 27 kW (36,71 hp), tekanan: 190 batang, daya pompa: 4.500 W, daya: 72 kW (97,89 hp), jenis arus masuk: AC (pendingin udara), frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 167 A, Perlengkapan: dokumentasi / manual, Technical Data – Demag Ergotech 250/630–1450 Clamping Force: 2,500 kN Tie Bar Distance: 630 × 630 mm Maximum Opening Stroke: 675 mm Minimum Mold Height: 330 mm Maximum Mold Height (with WA): 710 / 830 mm Platen Size (H×V): 950 × 950 mm Max. Tool Weight: 3,300 kg Max. Weight of Movable Mold Half: 2,200 kg Ejector Stroke: 200 mm Ejector Force: 69 kN Injection Unit Isdpsw Hq Hhsfx Aahsik Screw Diameter: 50 / 60 / 70 mm Injection Pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Stroke Volume: 530 / 763 / 1,040 cm³ Shot Weight (PS): 480 / 690 / 940 g Heating Capacity (Plasticizing Cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Hydraulic Power Pack: 37 / 45 kW Total Installed Power: 52 / 60 / 64 / 72 kW Supply Voltage: 3×400 V Frequency: 50 Hz Max. Current Draw: 167 A Dimensions & Weight Overall Length: 6,500 mm Overall Width: 1,900 mm Overall Height: 2,300 mm Net Weight of Machine: 13,100 kg

Tahun pembuatan: 2005, Kondisi: bekas, nomor mesin/kendaraan: SB218+221, Demag Erikkila overhead crane system with steel structure Dimensions approx. 20.4m x 3.6m incl. 3 bridge cranes, each with 500 kg payload/lifting capacity Iisdorwi A Djpfx Aahok Technical data of the installation: Crane runway / steel construction made from HEA 180/200 beams Dimensions as follows: External dimensions – space requirement approx. 20.4 x 4m with bridge crane payload 3x 500 kg with 3x Demag PK chain hoists Approximate measurements: Top edge of steel structure: 4.1m Bottom edge of steel structure: 3.85m Bottom edge of runway rail: 3.35m Top edge of bridge: 3.25m Bottom edge of bridge: 3m Hook height: 2.5m Crane span: 3m Crane girder length: 4m Support clear width: 3.24m Runway rail length: 20m Base plate of support: 30x30cm Support: HEA240 Runway rails: HEA240 Support spacing: 10 + 10m System will be delivered complete as shown: Complete steel structure + crane + 3x Demag PK 2 chain hoist 500kg Used condition Crane is dismantled and immediately available Item location is 75053 Gondelsheim Shipping by freight forwarding or collection only by prior appointment

Kondisi: baik (bekas), Overhead crane, crane, crane runway, crane rails, steel beams, HEB steel beams, double-T beams, IPB steel beams Iedpfxeu Inris Aaheik -Steel beams: for bridge crane, length 2x 13,400 mm / 2x 11,000 mm / 2x 7,970 mm -Beam type: IPB 340, HEB 340 -Crane runway rail: flat bar 50 x 30 mm -Dimensions: see photos -Sale/Price: in pairs or complete -Weight: 1,650 / 1,360 / 950 kg each / 7,920 kg total.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 74.627 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, volume langkah: 1.212 cm³, tekanan injeksi: 1.877 batang, panjang pelat: 710 mm, lebar pelat: 630 mm, The machine was in operation until December 2024! TECHNICAL DETAILS Screw diameter: 70 mm Injection pressure: 1,877 bar Stroke volume: 1,212 cm³ Clamping force: 3,500 kN Mould Mounting Tie bar spacing: 710 x 630 mm Minimum mould height: 330 mm Maximum mould height: 710 mm Maximum daylight opening between platens: 1,385 mm MACHINE DETAILS Overall length: 7,700 mm Overall width: 2,000 mm Overall height: 2,300 mm Total weight: 16,000 kg Iisdpfx Aajvvtplshek EQUIPMENT - Documentation - Manuals

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various injection molding machines available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100 t, screw diameter: 30/35 mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100 t, screw diameter: 25 mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200 t, screw diameter: 25/12+15 mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 35 mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30/25 mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60 t, screw diameter: 25 mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80 t, screw diameter: 25 mm, year of manufacture: 2001. 10) 2x KM SilcoStar 922A, year of manufacture: 2007. Inspection possible on site. Sale of individual machines possible. Some machines are partially cannibalized and/or defective. Iisdpfxswkiicj Aahok

Kondisi: hampir baru (bekas), jam operasional: 57.410 h, Mesin injeksi plastik - tanpa robot. Unit penjepit 35/320 Iijdpfx Aswxb Dbjahok Daya tersedia KW 35 -2025 Tahun: 2008 Jam kerja: 125433 Jam kerja pompa: 57410 Gaya penjepit / gaya pengunci [kN] 350/350 Maks. langkah pembukaan cetakan [mm] 350 Tinggi cetakan Min./WA211 [mm] 180/230/280 Jarak maksimum antar pelat [mm] 530/580/630 Pelat cetakan (h x v) [mm] 460x450 Jarak antara batang pengikat (h x v) [mm] 320x320 Diameter cetakan minimum yang diizinkan (k) [mm] 160 Bobot cetakan maksimum / pelat bergerak [kg] 440/330 Langkah ejektor std./diperbesar [mm] 100 Gaya eject/retraksi [kN] 33/13 Unit injeksi 35 Diameter sekrup [mm] 22 Rasio L/D 20 Tekanan injeksi spesifik (hingga 400°C) [bar] 1570 Volume kepala silinder maks. [cm³] 34 Berat suntikan maksimum (PS, PE*) [g] 30 Bobot bersih (tanpa oli) 4) [~kg] 2620

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 878 0643, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.212 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 1.090 g, panjang total: 6.500 mm, lebar total: 1.900 mm, tinggi total: 2.300 mm, berat keseluruhan: 13.800 kg, tekanan: 190 batang, daya pompa: 45.000 W, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 173 A, Perlengkapan: dokumentasi / manual, Mesin: Demag Ergotech System Jenis mesin: Mesin injection moulding Gaya penjepit: 3000 kN Diameter ulir: 70 mm Volume langkah: 1212 cm³ Tekanan injeksi: 1877 bar Berat tembakan: 1090 g Panjang keseluruhan: 6,5 m Lebar keseluruhan: 1,9 m Tinggi keseluruhan: 2,3 m Berat total: 13.800 kg Kapasitas pompa: 243 l/menit Unit pompa: 45 kW Iiodpfow U Dp Dox Aahsk Daya terpasang total: 64–72 kW Tekanan: 190 bar Koneksi: 3 × 400 V, 50 Hz, 173 A

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8673 0023, gaya penjepit: 15.000 kN, diameter sekrup: 145 mm, tekanan injeksi: 1.454 batang, lebar pelat: 1.880 mm, tinggi pelat: 2.150 mm, Regularly serviced machine – refer to repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between tie bars (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control system: DIAS Injection unit Screw diameter: 145 mm Isdpfx Aaewp Idcshjik Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: Ibed replaced 2015: Wiring board replaced 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with new seals 2017: Circulation pump for oil cooler replaced 2017: Teach box replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Kondisi: baik (bekas), Hall crane, crane, crane runway, crane rails, steel beam, HEB steel beam, double-T beam, IPB steel beam - Crane runway: for overhead travelling crane, length: 2 x 9000 mm - Beams: IPB 320, HEB 320 - Crane rail: flat bar 50 x 30 mm Iisdeu Inr Njpfx Aahok - Dimensions: see photos - Sale/price: as a complete set - Weight: 970 kg/pc / 1940 kg total - Transport dimensions: 9130/600/H380 mm - Weight: 1940 kg total

Kondisi: baik (bekas), Tahun pembuatan: 1999, Demag Ergotech systems 500/200 Clamping force: 50 tons Year of manufacture: 1999 Screw diameter: 30 mm Shot weight: approx. 90 Isdog Emvtspfx Aahjik Tie bar spacing: 355 x 355 mm

Kondisi: siap digunakan (bekas), Clamping force: 350 kN, tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Iiedpewaa H Djfx Aahjk

Kondisi: bekas, Tahun pembuatan: 2001, jam operasional: 58.764 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 502748, gaya penjepit: 1.000 kN, diameter sekrup: 30 mm, jarak antara tiang: 420 mm, volume langkah: 144 cm³, tekanan injeksi: 1,905 batang, gaya ejektor: 41 N, lintasan ejektor: 150 mm, langkah pembukaan: 500 mm, panjang pelat: 590 mm, lebar pelat: 590 mm, tinggi pemasangan: 250 mm, panjang total: 4.550 mm, lebar total: 1.450 mm, tinggi total: 2.000 mm, berat keseluruhan: 4.800 kg, kapasitas pemanasan: 9 kW (12,24 hp), daya pompa: 30.000 W, jenis penyesuaian ketinggian: hidrolik, panjang langkah: 150 mm, tinggi alat: 250 mm, berat alat: 700.000 g, Perlengkapan: dokumentasi / manual,

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Year of manufacture: 2001 Iiedpfx Ajf Tiq Sjahsk Clamping force: 50 tons Screw diameter: 25 mm Injection pressure: 2000 bar Shot weight: 54 g Core pulls: 4

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, DEMAG P1000 H40 2x shell (cover/housing) 2x wire rope drum Isdpfxov Uacvj Aaheik 2x gearbox 2x rope guide all in excellent used condition

Kondisi: baik (bekas), Overhead crane, crane, crane runway, crane rails, suspension track, light crane system - Manufacturer: Demag, 2x straight sections of suspension track for light crane system KBK II - Load capacity: 800 kg - Dimensions: 1x 6015/105/H195 mm / 1x 5630/105/H195 mm - Sale/Price: complete Iisdpfju N Sg Tjx Aahsk - Total weight: 189 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Demag Ergotech 200-50 Compact Clamping force: 50 tonnes Iiedowgdd Tepfx Aahjk Screw diameter: 30 mm Tie bar spacing: 355 x 355 mm

Kondisi: bekas, Tahun pembuatan: 2006, A Demag Ergotech injection moulding machine, including a Wittmann robot and machine enclosure, is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mold height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety cage. Documentation available. An inspection on site is possible. Iedpfowvadnex Aahsik

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 20020233 UG 1 Brücke, DEMAG KBK ceiling crane runway with approx. dimensions 29 x 6 m (6 m bridge – double girder crane) Load capacity: 1000 KG – 1 ton Technical data of the system: Crane runway made of Demag KBK2 rails with integrated power supply System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable drag chain, brackets/hangers, etc. Incl. Demag PK5 – 1000 KG electric chain hoist – lifting height approx. 4 m Ijdpfx Aaety Tdbjhsik Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight company or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are available from stock! Other KBK systems also in stock. Load capacity 125 KG – 1600 KG Please enquire about your crane runway with required capacity and dimensions without obligation.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Ref. No.: 18142 Manufacturer: DEMAG Model: Ergotech pro 50-270 Year of manufacture: 1997 Clamping Unit Iiodpfswm Iz Asx Aahjk Clamping force: 50 tons Opening stroke: 400 mm Tie bar spacing (h x v): 355 x 355 mm Minimum mould height: 210 mm Platen size (h x v): 540 x 540 mm Injection Unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight (PS): 95 g Injection pressure: 2573 bar Dimensions and Weight Dimensions (LxWxH): 3,65 x 1,15 x 1,18 m Machine weight: 3,600-2,500 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi angkat: 6.000 mm, kecepatan pengangkatan utama: 5.000 mm/menit, in excellent condition, incl. load collective memory with high reserve, incl. under-slung bottle, electrics 400/230/24V, incl. central electrical distribution for crane operation etc.! Advantage: No CAN bus control! Iijdpfjq R N Tqjx Aahjk Also available as a crane set.

Kondisi: seperti baru (mesin pameran), Used/refurbished hub motor for a DH hoist Iedjh Up U Sepfx Aaheik ATTENTION! We have more than 15,000 Demag parts in stock. For more information, please visit our website or view our other listings.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various used injection moulding machines are available: 1) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. Ijdpjv R Ew Dofx Aaheik 3) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2003, operating hours: approx. 100,000 h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2006, operating hours: approx. 105,000 h. 5) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 6) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 7) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 8) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 67,000 h. 9) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2007, operating hours: approx. 98,000 h. 10) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 11) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2001. 13) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2002. 14) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2006, operating hours: approx. 107,000 h. Documentation is available. On-site inspection is possible. Machines can be sold individually.

Tahun pembuatan: 1985, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: (20020324 EG) - VK-RES, DEMAG KBK crane system with runway dimensions approx. 16.5x7m (7m bridge – double-girder crane) Load capacity / lifting capacity: 500 kg – 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/hangers, etc. incl. Demag PK2 500KG chain hoist – lifting height approx. 4.5m Iisdpety S I Eofx Aahsk Crane is dismantled and available immediately Used condition, see photos Location: 75053 Gondelsheim Shipping via freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Load capacity: 125kg – 1600kg Please feel free to send a non-binding inquiry with your required crane runway load capacity and dimensions.

Tahun pembuatan: 1989, Kondisi: baik (bekas), nomor mesin/kendaraan: TH2000/9953, DEMAG KBK overhead crane track with approximate dimensions 9x4m (4m bridge) Multiple units of this crane are available! Payload / Lifting capacity: 500 KG - 0.5 t Technical data of the system: Crane runway made of Demag KBK2 rails The system is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Including 500 kg steel chain hoist - lifting height approx. 3.5 m The crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are stock items! Iiedpsv Iakaefx Aahjk Other KBK systems also available in stock. Payload from 125 kg to 1600 kg Please send us your non-binding enquiry for crane tracks specifying required capacity and dimensions.

Tahun pembuatan: 2013, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: TH2000Messraum, Demag KBK crane runway (crane track) 9.3 x 5.3 m (bridge travel approx. 5 m) The crane is also available in a range of other dimensions, multiple units in stock featuring raised trolleys. Lifting capacity: 500 kg Technical data: - Crane runway made of Demag KBK2 profiles - Equipped with raised trolley system – crane girder is positioned between the two running rails for maximum lifting height - With internal power supply! Iisdpfjv Iai Nsx Aahok The system is supplied complete: - KBK rails, rail connectors, trolleys, end caps, cable chain, suspension brackets/hangers, etc. - Incl. Demag DK chain hoist, 500 kg (older model) Crane is dismantled and available immediately Various cranes in stock Very good condition; see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or collection strictly by prior arrangement Demag KBK1, KBK2, and KBK3 rails are available from stock! Additional KBK systems in stock. Load capacities from 125 kg to 1,600 kg Please enquire about your required crane track regarding load capacity and dimensions without obligation.