Beli Edm bekas (513)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HU50610, 15" touch screen control with Windows operating system Table dimensions: 630 x 360 mm Tank dimensions (LxWxH): 940 x 550 x 350 mm X travel: 400 mm Y travel: 300 mm Z travel: 300 mm Table and clamping device size: 100 ~ 400 mm Max electrode weight: 11/50 kg Max workpiece weight: 500 kg Max output current: 50A Best surface finish after machining: 0.08 Ra Input power: 10 kVA Nwedpfxowktkko Abuob Dielectric water capacity: 300 L Machine dimensions (LxWxH): 1320 x 1380 x 2150 mm Weight: 1450 kg Accessories, equipment: - Number of filters: 3 pcs. - C-axis (load capacity 11 kg) - Dielectric system - Machine feet - Documentation - Hand tools

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: JM325D, Mesin EDM lubang awal HGH berfungsi normal inkl. dokumen dijual. Nwsdpfx Aexnba Ejbueb

Kondisi: baik (bekas), Tahun pembuatan: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis: 350 mm. Y-axis: 250 mm. Z-axis: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Nodju Tq Hwspfx Abuowb Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight: approx. 2600 kg.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Travel X, Y: 14.6" x 10.6" Travel U, V, Z: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 lbs Max. X, Y rapid traverse rate: 31.5 in/min Drive system: AC servo motor / linear motor Wire diameter: 0.004" – 0.012" Max. wire feed rate: 11.8 in/s Njdpfx Aowqq Rhobuowb Wire tension: 0.44 – 5.52 lbs Taper angle: ±21° / 4.33 in (DA+DB=0.6 in) Machine dimensions (W x D x H): 90.6" x 89.2" x 80.6"

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: belum diuji, nomor mesin/kendaraan: XXX,

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: belum diuji, nomor mesin/kendaraan: XXX,

Kondisi: bekas, Tahun pembuatan: 2006, edm01 Nwodpew S Egfsfx Abujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 4.245 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 350 mm, berat benda kerja (maks.): 400 kg, tinggi total: 259 mm, lebar total: 185 mm, panjang total: 270 mm, lebar meja: 450 mm, panjang meja: 600 mm, tahun perombakan terakhir: 2024, kapasitas tangki: 400 l, Agie Hyperspark 2HS. Visible in our workshop in Semsales, Switzerland. Machine in excellent condition. Few operating hours. 26-position tool changer. Nwedpfjv T U Tyex Abusb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124322, berat benda kerja (maks.): 500 kg, jarak pergerakan sumbu X: 318 mm, jarak lintasan sumbu Y: 218 mm, jarak gerak sumbu Z: 114 mm, TECHNICAL DETAILS Travel Range X-axis: 318 mm Travel Range Y-axis: 218 mm Travel Range Z-axis: 114 mm Travel Range U-axis: ±48 mm Travel Range V-axis: ±48 mm Control System: PC-based, 14" color monitor, MS-DOS Taper Angle/Height: ±30° / 65 mm Working Area Type: Tank with swing door Max. Workpiece Dimensions (W × D × H): 1,130 × 510 × 260 mm Door Width: 1,010 mm Max. Workpiece Weight: 500 kg Table Dimensions (W × D): 560 × 440 mm Distance Floor to Table: 1,050 mm Dielectric Volume: 240 l Dielectric Level Control: Automatic Wire EDM System Wire Diameter: 0.10 – 0.25 mm Type of Wire Guide: Diamond-closed, backlash-free Programmable Wire Feed Rate: 0.2 to 15 m/min Programmable Wire Tension: 0.3 to 3 daN Permitted Spool Weight and Types (DIN): 1.6 kg Nodpov Tpnrjfx Abuowb Permitted Spool Weight and Types (JIS): 3 kg Used Wire Disposal: Wire chopping at rear Automatic Threading for Wire Diameter: 0.050 to 0.300 mm Automatic Re-threading for Wire Diameter: 0.070 to 0.300 mm Minimum Start Hole Diameter for Threading: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized water Total Dielectric Volume: 900 l Dielectric Temperature: ±0.5 °C Cartridge Filters: 16 Deionizer Resin Filling Volume: 30 l Deionization Control: Automatic Number of Deionizer Bottles: 3 Flush Pressure Range: 0 – 20 bar Number of Programmable Pressure Stages: 16 Generator Max. Machining Speed (Material: Steel, Wire: SW30X): 300 mm²/min Min. Surface Roughness (Material: Steel, Height: 20 mm): 0.12 µm Ra Min. Surface Roughness (Material: Carbide, Height: 20 mm): 0.1 µm Ra Available Technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine Dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input Voltage: 380/400 V Power Consumption: 12 kVA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 921022, berat benda kerja (maks.): 750 kg, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, TECHNICAL DETAILS Travel range X / Y / Z: 350 × 220 × 220 mm Travel range U / V: 350 × 220 mm Taper angle/height: ±30° / 220 mm Machining type: submerged cutting technology Control: Windows NT with 12" TFT display, standard keyboard, and remote control Work area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Taper cut: max. ±30° / 220 mm Wire EDM system Wire diameter: Ø 0.33 to 0.10 mm Diameter for automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic re-threading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Nodsv Ul I Dopfx Abuswb Dielectric temperature: ±1 °C Ion exchanger resin volume: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire chopper - Standard interfaces (PCMCIA, Ethernet, etc.)

Kondisi: bekas, Table length 400 mm Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive set of accessories. Nodpfxsvwgq Ss Abuswb

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.000 kg, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 400 mm, tinggi total: 2.230 mm, panjang total: 1.800 mm, lebar total: 1.600 mm, tinggi benda kerja (maks.): 400 mm, lebar benda kerja (maks.): 500 mm, panjang benda kerja (maks.): 850 mm, berat keseluruhan: 2.500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection in X/Y/U/V/Z axes Standard wire guides: 0.25 mm Nwodpfxow Hxqns Abusb Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation at our customer’s site until recently and is now immediately available.

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 331965, berat benda kerja (maks.): 500 kg, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 200 mm, tinggi total: 2.180 mm, panjang total: 1.800 mm, lebar total: 1.600 mm, tinggi benda kerja (maks.): 200 mm, lebar benda kerja (maks.): 500 mm, panjang benda kerja (maks.): 850 mm, berat keseluruhan: 2.190 kg, en-GB Nwedpfx Aow Htdpobusb

Tahun pembuatan: 2005, Kondisi: diremajakan ulang (bekas), AGIECUT Progress 3 Year of manufacture: 2005 Travels: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Njdpfx Aogzv Scobuswb Available wire diameters: 0.20 – 0.33 mm Submerged cutting machine with automatic wire threading and re-threading after wire breakage Maximum threading height: 420 mm Equipped with manual front door (accessible from one side) Including AGIEJOGGER hand pendant for convenient setup AGIE IPG high-performance generator AGIEVISION control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be fully overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. We are also happy to offer commissioning and training services.

Tahun pembuatan: 2007, Kondisi: diremajakan ulang (bekas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in water bath) / 800 kg (out of water bath) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Nwsdpfjmmfwujx Abusb Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled upon receipt of order. You will receive a 6-month warranty on all machine components. We are also pleased to offer you commissioning and training services.

Tahun pembuatan: 2006, Kondisi: diremajakan ulang (bekas), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading Njdsgfm Rrspfx Abujwb With automatically retractable tank (accessible from two sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled and thoroughly tested by us after order confirmation. Subsequently, we will commission the machine at your site. You will receive a 6-month warranty on the machine. We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, AGIECUT Classic 2S Year of manufacture: 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (not submerged) Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged machine with automatic wire threading and re-threading after wire break Nedpfx Aov Dkvrsbuowb With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, a test cut is performed to verify top surface quality before delivery. You will receive a 6-month warranty on the machine. Commissioning and on-site training can gladly be offered.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, The GF AgieCharmilles CUT 30P, manufactured in 2011, is a powerful and precise pre-owned wire EDM machine, specially designed for demanding applications in the metalworking industry. Equipped with state-of-the-art technology and intelligent controls, the CUT 30P offers superior cutting quality, minimal maintenance requirements, and an excellent return on investment. Key Features & Advantages: ✅ Large Working Area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V axes: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for long operating times ✅ Intelligent Control & User-Friendliness: Windows-based control with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphic verification for accurate simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and durable wear parts Integrated collision protection for maximum safety Ideally suited for: Nwjdpsv S Ua Dofx Abusb ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and cost-effective wire EDM! 📌 Our pre-owned 2011 machine is cleaned, serviced, and thoroughly tested before sale to ensure top quality and reliability. 📩 Contact us for a tailored quotation or to schedule a demonstration! We are also pleased to offer commissioning and operator training on this machine.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (LxWxH): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting speed (cylindrical cut): 300 mm²/min Available wire diameters: 0.07 - 0.33 mm Including AGIE universal clamping frame Nwedpfewwr H Rex Abuob Including AGIE JOGGER handbox Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. Commissioning and training can also be offered upon request.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 800 kg, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged working machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand pendant for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (for use with 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control unit AGIE IPG-V generator Nwsdpfx Ajwprq Tsbueb Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be thoroughly cleaned, overhauled, and extensively tested upon receipt of order. A laser measurement of the axes is performed in-house. We are also happy to carry out a customized test on the CUT 3000 for you. User training at Techma on your overhauled machine is included. Optional extras available on request: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. KIT 50 option Including automatic wire changer (AWC) Submerged machining with automatic wire threading With automatic, two-sided lowerable tank Including AGIEJOGGER hand-held unit for convenient setup Including AGIESETUP 3D Including glass scales for X and Y axes Nwsdpfet I Dtnjx Abusb VISION 5 control 15" LCD color screen, tactile keyboard and mouse Including Conic-Plus option for enhanced tapering Including Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg This machine will be completely overhauled and tested by us. Custom test cuts are available upon request. We also offer on-site commissioning and training for this machine.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes automatically lowering tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed up to 340 mm²/min Best surface finish: Ra 0.10 µm Nodpfx Ajw D Accsbuewb Available wire diameters: 0.15 to 0.33 mm Machine overall dimensions: 2,600 x 2,600 x 2,340 mm Total machine weight: 3,300 kg The machine will be cleaned, completely overhauled, and function-tested by us upon receipt of order. You will receive a 6-month warranty on the machine. We are happy to offer commissioning of the machine.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 800 kg, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 426 mm, model controller: AGIEVISION 5, The seller provides a 6-month warranty on all machine parts. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 426 mm Travel U/V-axis: ± 70 mm Machining Performance Max. taper: 30° at 100 mm height Max. cutting rate: 500 mm²/min Achievable surface quality: Ra: 0.20 µm Nwedpfx Abjwh Sgljueb Available wire diameters: 0.15 – 0.33 mm Workpiece Data Max. workpiece dimensions: 1,050 x 650 x 420 mm Max. workpiece weight (in water bath): 400 kg Max. workpiece weight (without water bath): 800 kg Generator & Control Generator: AGIE IPG-V Control: AGIEVISION 5 MACHINE DETAILS Dimensions (L x W x H): 1,940 x 2,300 x 2,600 mm Net weight: 3,460 kg EQUIPMENT - Water bath machine with automatic wire threading - Automatic wire re-threading after wire breakage - AGIEJOGGER hand box for convenient setup

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, AGIECUT Excellence 3 Year of manufacture: 2003 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged-wire EDM machine with automatic wire threading With automatically lowering work tank (accessible from two sides) Incl. AGIEJOGGER hand-held box for convenient setup Incl. AGIESETUP 3D AGIEVISION control system AGIE IPG generator Nedjrr Uzwspfx Abuswb Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, chiller

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 935089, - Water bath machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters - Collision protection on all 5 axes (ICP) - Clamping accessories shown included in the scope of delivery TECHNICAL DETAILS Travel distances X / Y / Z: 550 / 350 / 400 mm Travel distances U/V axis: 550 / 350 mm Taper: max. +/- 30° at 400 mm height Workpiece dimensions: max. 1200 x 700 x 400 mm Njdpfx Aelru Rbjbujwb Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1500 kg Surface quality: up to Ra 0.22 μm Cutting speed: max. 300 sq mm/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millennium with Windows operating system (12" TFT touchscreen) MACHINE DETAILS Dimensions (L x W x H): 2600 x 2810 x 2240 mm Net weight: 3300 kg Connection voltage: 400 V / 3 phase / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration