Beli Eisen Und Hammerwerk Gmbh bekas (88.729)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Hand pipe bender HRB-3D 850 For bending pipes and solid material up to a maximum of 12 mm. Precise and repeatable bending is ensured by three battery-powered digital displays, which show the bending angle, pipe feed, and pipe rotation accurately. - Three-jaw chuck 80 mm - Stop system for feed - Feed length approx. 850 mm Ijdettagdjpfx Adqetn The hand pipe bender should be securely mounted on a table or frame (not included in the scope of delivery). We are happy to provide you with a detailed offer. Please send us your complete company address including email and contact person.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Layar multicolor untuk pengaturan yang mudah Pengaturan awal jumlah produk yang akan dikemas Penghitung total produk terintegrasi (dengan opsi reset) Penggantian rol dalam waktu kurang dari satu menit Penyegelan dengan pedal kaki, otomatis atau manual Sistem konveyor untuk pengisian kantong otomatis tersedia berdasarkan permintaan Spesifikasi Teknis Panjang kantong maksimum: 450 mm Lebar kantong maksimum: 250 mm Ketebalan kantong maksimum: 0,04–0,1 mm per lapis Kecepatan pengemasan: hingga 25 pcs/menit Tegangan suplai: 1Ph, 220 V, 50 Hz Daya total: sekitar 1 kW Berat mesin: sekitar 70 kg (termasuk printer) Dimensi mesin: sekitar 670 × 665 × 860 mm Area cetak: 53 × 75 mm Jenis kantong: kantong rantai pada rol Itodpfx Adoxlzr Aeqsn

Kondisi: baik (bekas), Tahun pembuatan: 1996, rumed-3300-kuehl-brutschrank Iedpoxl Awgefx Adqetn

Kondisi: bekas, Tahun pembuatan: 1997, Dijual oven enamel yang terlihat pada gambar. Jika ada pertanyaan, silakan hubungi kami. Iodpfxexlq Elj Adqotn

Kondisi: baik (bekas), Thread cutting machine Hahn und Goebel HG 12E Itodpfxed Rkbrj Adqjn Spindle speed 180–900 rpm 380V Machine no. 1917/16 M4–M65

Kondisi: bekas, Technische Details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m Itodpfswiu Smox Adqen BRUSHING MACHINE for deburring / brushing of tube ends / welded profile tubes / tube bodies on the face side

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of pipe geometries with bending radii from 1.5 x D → Maximum bending capacity for pipes: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for pipes: 30 x 30 x 3 mm → Maximum bending capacity for pipes: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW → Pipe feed length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display enables easy and intuitive programming and operation of the machine. After the pipe is fed in, it is clamped in the carriage by the chuck, allowing for precise positioning of the pipe and, thus, the creation of dimensionally accurate geometries. The standard configuration also includes pipe geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not allow operation. This eliminates operator errors. Optional additional features provide increased convenience and boost the output and efficiency of the system. Data exchange with the optional TBS-3D pipe calculation program (PC version) is handled via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → Servo drive for the bending axis 1.5 kW → Adjustable speed → Left-hand bending direction → Bending angle resolution: 0.1° → Maximum bending radius: 120 mm → Bending shaft diameter: 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic pipe clamping with adjustable clamping pressure → Programmable mandrel pre-retraction Isdpfx Aetr U Hlodqetn PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control system calculates feed values and bending angles immediately upon input of length and angle. Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: RPM 1000 D, Robot bekas - Mesin poles P 1000 D Tipe: P1000 Versi kanan Itsdexludxjpfx Adqsn Piringan poles Ø 1000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, jam operasional: 110 h, The twin-screw laboratory extruder was located at a university and used exclusively for teaching purposes. It has only 110 operating hours. Machine designation: Twin-Screw Laboratory Extruder Manufacturer: Leistritz Extrusionstechnik GmbH Model: MICRO 27 GL / 32D Year of manufacture: 1997 Screw speed: 400 rpm Operating voltage: Electrical connection: 400V, 50Hz; Control voltage: 230V Operating hours: 110 h Drive motor: 8.4 kW, Input speed: 2200 rpm Dimensions: Extruder height: 1050 mm; Length: approx. 2500 mm; Width: approx. 800 mm; Height with operator panel: approx. 1900 mm; Total weight of extruder: approx. 950 kg. Technical documentation: Yes Isdpsxlpzfefx Adqotn Remarks: Screw diameter: 27 mm, Screw length: 32 D, Screw flight depth: 4.3 mm, Screw rotation: co-rotating / counter-rotating, Screw speed range: 10 - 400 rpm, Total screw torque: 200 Nm, Screw back pressure (continuous operation): max. 200 bar, Gear ratio: i = 5.38. Accessories: Dosing unit, die head / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel version), strand dryer, pelletizer, downstream profile, die head / LSA tool. Condition: Used, very good Price: On request

Tahun pembuatan: 2025, Kondisi: baru, Separation of light and heavy fractions, removal of lint, bristles, foreign materials, etc. Separator sizes: Separator width 200mm - 1800mm. Itsdpfx Adschb Ruoqen Our standard separators: - Number of separation stages: 8 / 12 / 15 / 17 - Air velocity inside the separator: 2 to 20m/s Upstream and downstream equipment available as required. Upon request, we offer planning, installation, and commissioning. See sample photos. We are the manufacturer of these zigzag separator systems and we produce various sizes/types. In order to provide you with an offer, we require the following information: 1. What material do you wish to separate? 2. Particle size 3. Bulk density (kg/l) 4. We have a technical center in our facility where we can test your material.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Performance: 1000 x 3.5 mm; light barrier, Itjdpfsxdv Ucex Adqen - electric foot switch - left side gauge 600 mm, two support arms each 600 mm - central lubrication - Ortlinghaus brake-clutch combination - switchable between upstroke or tilting roller table.

Kondisi: baru, Tahun pembuatan: 2025, Five-Axis CNC Milling Center – 3D CNC Machining Center > The CNC milling system ‘Basis’ is the ideal entry-level model for machining plastics, composite materials such as CFRP, model building materials, or aluminum. > High feed rates, a compact 5-axis milling head for spatial machining, and top-class milling results: The machine is individually configured to your material requirements prior to delivery. This ensures excellent surface quality and outstanding machining results with all materials. > Using a fixture from HG GRIMME SysTech, the milling quality can be further significantly enhanced. Existing fixtures or tables can continue to be used at any time. > Modular expansion stages: The CNC machine can be upgraded at any time. Individual requirements can also be quickly implemented. For example, with an optional partition wall, one half of the table can be loaded and unloaded while machining takes place on the second half. This technology accelerates the production cycle. Isdpsxdwn Rofx Adqjtn > Safe operation: The safety cabin, even in the basic configuration, features a large access area and can optionally be equipped with a noise reduction package. All drives and guides are protected and located above the work area. We offer around 365 options to tailor your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time. > Basic Version of the CNC Machining Center • Cabin with sliding doors, automatic pneumatic opening • High-performance NUM Flexium+ CNC control with handheld terminal (nPad) and 19`` graphical display • Tool changer system with 13 positions, externally loadable • Bellows dust protection on Z-axis • Cooling unit Workpiece Envelope X/Y and Z • 2,500 x 1,000 x 600 mm (plus 162 mm base) Travel Range X/Y and Z • 3,100 x 1,600 x 910 mm Rotary Axis Travel Ranges (A and C) • C-axis rotation: 540° • A-axis swivel: ±110° Speeds • Rapid traverse, linear axes X/Y: 80 m/min • Rapid traverse, linear axis Z: 30 m/min • Rapid traverse, rotary axes A/C: 10,800°/min / 18,000°/min Accuracies • Positioning accuracy: ±0.045 mm • Repeatability: ±0.040 mm Milling Spindle • High-frequency milling spindle, 9 kW for continuous operation (S6) • High-frequency milling spindle, 8 kW for continuous operation (S1) • Max. speed: 36,000 rpm • Tool holder: HSK E 40 Machine Weight: • Approx. 8,000 kg Included Special Equipment • Vacuum pump and vacuum system, 1x 6-fold • Knee switch, 1x • Ethernet and remote maintenance • 3D spline • 3D head data • T-Box interface

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Bodi boks aluminium untuk Iveco 70 C dengan 3 pintu gulung, tangki air stainless steel 3000 liter dengan 2 lubang pembersih. Boks dan tangki sudah terpasang penuh pada rangka pemasangan untuk Iveco Allrad 70C. Itodpsxlkpkefx Adqsn

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: RPM 1000 ZO, Robot bekas - Mesin pemoles P 1000 ZO desain kanan Isdjxludlepfx Adqotn Disc pemoles Ø 1000 mm Dengan feed dan osilasi

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent markings, the use of a laser has now become indispensable across numerous industries. Itjdsxd A I Aepfx Adqsn The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—and without extensive programming knowledge. Serial and article numbers are automatically incremented after initial setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side arms for the marking of long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (including activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for status indication • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Aluminum profile frame • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2025, Kondisi: baru, de_001 Itedpfx Adjchb Ryjqjn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.140 mm, lebar total: 1.040 mm, kapasitas muatan per bagian penyimpanan: 900 kg, berat keseluruhan: 555 kg, jumlah laci: 5, MESSER RETURN UNIT! Direct from the manufacturer, the original from the patent holder Apfel GmbH. Equipped with 5 vertical drawers, each 180 mm wide, and a maximum load capacity of 900 kg per drawer. Dimensions: W = 1040 mm, D = 1050 mm, H = 2140 mm Two-tone powder-coated finish Housing: black grey, textured (RAL 7021) Drawers: black grey, textured (RAL 7021) Customs tariff number: 94032080 Swiss customs tariff number: 9403.2010 Origin: DE/08 Weight: approx. 555 kg Supplied as a fully assembled set, including: Itodpeuudgzofx Adqjn - 50 storage trays - Sample kit with bins and divider plates

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 12.000 rpm, kecepatan spindel (maks.): 36.000 rpm, de-hu-01 Isdpfexdwndex Adqetn

Kondisi: sangat baik (bekas), Tilting and Swivelling Vice Jaw width: 130 mm Maximum opening: 100 mm Swivel range: 360 degrees Tilting range: +45 degrees / -12 degrees Jaw height: 40 mm Overall height: 175 mm Transport dimensions: Length: 410 mm Width: 155 mm Height: 175 mm Iodpfxen Slias Adqetn Weight: 20.5 kg

Kondisi: bekas, Kami menjual unit robot polishing bekas. Mesin dalam kondisi bekas pakai. Unit mencakup: Itedpfxexlufve Adqjn 1x KUKA KR30/2 2x mesin polish robot 1x meja geser ganda 1x lemari kontrol Jika ada pertanyaan, silakan hubungi kami!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), jenis pendinginan: udara, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Isdpexd Az Nofx Adqetn with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2025, Kondisi: baru, Geschlossene Freischwingende Kreis - Siebmaschinen, mit Ballklopfreinigung und nach hinten auf einfache Weise wechselbare Sieblagen Geeignet zum sieben von allen mehl-, koernigen-, Granulatfoermigen Materialien im trockenen Zustand. Groessen von Breite 500 -1500mm / Laengen 1200 -2400mm Iedpfebcngijx Adqstn Sieblagen 2 bis 4 lagig, Koernung < 18mm frei waehlbar Wir produzieren verschiedenen Groessen / Typen. Um Ihnen ein Angebot zu unterbreiten, benoetigen wir folgende Angaben: 1. Was fuer Material moechten Sie sieben? 2. Koerngroesse 3. Schuettgewicht kg/l

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 26.000 kg, Tahun pembuatan: 2001, nomor mesin/kendaraan: PZEWL 160 R / HK, Machine model: Two-Column Eccentric Press Model: PZEWL 160 x 1 750 R / HK Serial number: A01006-03 Year of manufacture: 2001 Manufacturer: Müller Model: PZEWL 160 R / HK Year of manufacture: 2001 Machine No.: A01006-03 Included: Strip feeding line, consisting of: - Müller straightener combination, type VR-IV-S - Strip width: 400 mm - Strip thickness: 7.0 mm - Compact decoiler - Technical documentation (DE) EU Directive Conformity: - Machinery Directive 89/392/EEC (as amended by 91/368/EEC, 93/44/EEC, 93/68/EEC) - Low Voltage Directive 73/23/EEC Applied harmonised standards: - EN 292, Part 1 and 2 - EN 60204, Part 1 - EN 692 National specifications: - VBG 7n5.1 - ZH1/456 - ZH1/457 General specifications: - Height: approx. 4.70 m - Width: approx. 3.41 m - Depth: approx. 2.64 m - Weight: approx. 26,000 kg - Power consumption: 25 kW Technical parameters: - Max. pressing force at 6.7 mm before BDC: 1,600 kN - Torque at 120 strokes/min: approx. 9,350 Nm - Torque at 40 strokes/min: approx. 10,700 Nm - Clearance between ram guides: 1,750 mm - Width between guides: 1,450 mm - Table to slide distance (at max. stroke, top position): 560 mm Working table: - Dimensions: 1,700 x 1,050 mm - Thickness: 160 mm - Table opening: 1,200 x 240 mm - T-slots: 7 pcs, width 22 mm, thread M20 Ram: - Stroke: 8–160 mm - Number of strokes: 30–120/min - Height adjustment: 100 mm - Clamping area: 1,400 x 800 mm Counterbalancing pressure: - For the machine: 3.60 bar - For 100 kg tool weight: 0.32 bar Ijdpjwmmzuofx Adqetn Drive – Flywheel: - Speed: 171–685 rpm - V-belt dimensions: SPB x 4,500 mm - Number of belts: 4 - Run-down time at max speed: 90 s Motor: - Power: 22 kW - Type: B3 - Speed: 1,500 rpm - Voltage: 400/690 V Hydraulic clutch: - Type: 0-123-010-80-001-846 - Operating pressure: 60 bar - Hydraulic power pack: 2.2 kW

Kondisi: bekas, Thread tap for pipe threads Roughing and finishing cutter Itsdpfx Asdk Rdvedqen R 2 3/4 inch

Tahun pembuatan: 2025, Kondisi: baru, Geschlossene Freischwingende Kreis-Siebmaschinen, mit Ballklopfreinigung und nach hinten auf einfache Weise wechselbare Sieblagen Isdpfxobcnatj Adqjtn