Beli Eisen Und Hammerwerk Gmbh bekas (88.732)

Kondisi: baru, Tahun pembuatan: 2022, Gerobak panen buah dengan tiga titik untuk dihubungkan ke traktor. Hanya tersisa 2 unit di stok. Dilengkapi dengan: - Platform kerja yang dapat diperpanjang secara hidrolik Iodpfeh N A Sbex Adqsih - Penyeimbang lereng hidrolik (kemiringan) - Poros kemudi hidrolik - Pengangkatan hidrolik untuk pengaturan ketinggian Tempat palet besar - 2 unit. Bobot total diizinkan maksimum: 1.500 kg Bobot kosong sekitar 650 kg Tinggi: sekitar 2 m Lebar: sekitar 1,5 m Panjang: sekitar 4,2 m Opsional: - Rem pisau hidrolik (€1.500,- netto) - Stabilisasi hidrolik (€1.300,- netto)

Kondisi: baik (bekas), Tahun pembuatan: 2009, Bürck + Lang gergaji bawah tanah dengan pengumpanan otomatis, alat penjepit untuk profil, pengaturan samping untuk lebar potong, berfungsi penuh. Ijdpfx Adowb H T Tsqjih

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Technical Description with Key Data: Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Iodpfsk E Hmtox Adqeih Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm.

Kondisi: baru, berat keseluruhan: 33.400 kg, berat kosong: 3.400 kg, berat muatan maksimum: 30.000 kg, ukuran ban: 559x300, Tahun pembuatan: 2025, TPW 30 VL - LK Turntable steering on front axle Trailing axle fixed 6,000 mm length Ijdpfjhbmu Ijx Adqeih 2,200 mm width Drawbar with safety latch and adjustable height Wheels with 559x300 solid rubber tyres on steel rims 5 lashing points on each longitudinal side for load securing Paint finish: RAL 5010 blue Transport platform: 40 mm recessed wooden floor, bolted #HeavyDutyTransport #InHouseTransportSystems #HeavyDutyTrailers 6-100 tons #HeavyDutyTrailers from 3 to 100 tons #HeavyDutyTransportPlatform #PlatformHeavyDutyTrailer #AllWheelSteering #TransportTrolley

Kondisi: baru, Tahun pembuatan: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lift door, with the advantage that the blasting media falls into the cabinet when opening the door and not onto the floor. If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are manufactured at our Grossenlüder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their familiar long-standing contacts. Iodpfxofnh Rvs Adqeih

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: fungsi terbatas, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), berat kosong: 4.000 kg, laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Ijdpfxou Thh Ej Adqsih Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6,000 mm - For round pipes up to max. OD = 150 mm - For square tubes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting sequence Iiodpfxjg Dvdcs Adqjh - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The images show an older, larger machine.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, consisting of: > Stop rail, 2 m long > 2 complete stops Iodpfxjfrnpne Adqoih > 1 measuring scale, right to left > 1 measuring scale, left to right > Mounting screws - The wooden base rail 50 x 45 mm, onto which the stop rail is mounted, is not included in the scope of delivery.

Kondisi: baru, Tahun pembuatan: 2025, TPW 30 AL - AS dengan kemudi king pin penggerak semua roda, ban 559x300. Lantai transportasi dari kayu Douglas, tebal 40 mm. Dimensi: Panjang 4000 mm, lebar 2000 mm. Lengan penarik 1600 mm dengan mata penarik 40 mm dan pengaman jatuh dengan penyesuaian ketinggian. Pengecatan sesuai RAL 2000. #Sistem Transportasi Internal #Trailer Beban Berat 6-100 Ton #Trailer Beban Berat dari 3 hingga 100 Ton #Kendaraan Platform Transportasi Beban Berat #Trailer Platform Beban Berat #Kemudi Semua Roda #Gerobak Transportasi Iiodpfxshbmuko Adqjh

Kondisi: baru, Tahun pembuatan: 2025, Instalasi penyaring debu yang mudah dirawat, dirancang khusus untuk debu sandblasting yang agresif dengan praseparator ruang benturan, terdiri dari: a) 1 unit filter kering cartridge, tipe PF 2.16.B250 untuk 30.000 m³/jam (ukuran lain tersedia), terdiri dari housing baja 3 mm yang tahan vakum, dibagi menjadi ruang gas mentah dengan cartridge filter, praseparator ruang benturan, dan ruang gas bersih dengan pembersihan filter menggunakan udara tekan, masing-masing dengan pintu perawatan terpisah Easy Open. Corong penampung debu dengan katup celah atau rotary valve untuk pembuangan debu dengan Big Bags. Kontrol katup magnetik dengan indikator tekanan diferensial untuk pengaturan optimal pembersihan cartridge filter. Pintu perawatan model engsel putar untuk kemudahan perawatan. Iiodpfx Aew Ivqmedqjh

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 19.173 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 150 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 35.800 kg, kapasitas tangki oli: 4.300 l, Technical Data – Baler: Manufacturer: Europress Umwelttechnik GmbH, Germany Model: EP5 150 V5 Year of manufacture: 2015 Operating hours: 19,173 h Number of bales pressed: 282,961 Number of press strokes: 1,895,112 Main press force: 150 t Specific press force: 181.8 N/cm² Filling chute dimensions: 1,000 x 2,000 mm (W x L) Bale dimensions: 750 x 1,100 mm (H x W), length variable Drive power: 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current: 230 A Supply cable cross-section: 120 mm² Binding: 5-fold vertical, fully automatic Hydraulic oil tank capacity: 4,300 l PLC control: Siemens S7 / ET200S Transport weight (baler): 35,800 kg Iisdpfju Thfdox Adqeh Special equipment: - Floor plates and side walls made of HARDOX - Bale pusher in front of counter blade, with cleaning cycle Scope of delivery: - 1 baler - 1 control cabinet - 1 set of drip trays under the press - 1 maintenance platform on the press channel - 1 feed hopper - 1 drop shaft - 10 wire roll stands - 2 wire feed stations with return pulleys - 1 set of machine documentation (operating instructions, electrical schematic, hydraulic schematic, EC Declaration of Conformity) Remarks: The machine is still fully assembled and available at short notice. Dismantling and loading are the buyer's responsibility. Complete documentation (operating instructions, electrical schematic, hydraulic schematic, EC Declaration of Conformity) is available in German. Inspection by appointment. No liability for technical data or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm - For round pipes up to max. OD = 220mm - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display - Data import via USB and LAN Iijdpfx Asgu Nmhedqjh - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany The images show an older machine.

Kondisi: baru, Tahun pembuatan: 2025, TPW 8000 AL - AS Industrial Heavy-Duty Transport Trailer Iodpfehbicwsx Adqsih Length: 6000 mm, Width: 2000 mm Payload: 8,000 kg, All-wheel stub axle steering, 30 mm wooden transport floor, drawbar 1,150 mm with 40 mm pin, solid rubber tires 425x150, painted in RAL 2000, double-acting wheel chock, 6 lashing brackets per side for load securing.

Kondisi: baru, Tahun pembuatan: 2025, f5d67387 Iodpfow Ivrwex Adqeih

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Isdpfx Adeu Th S Seqeih Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput capacity for empty beverage cans with: • One press stroke: approx. 1.7 t/h • Two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions assembled: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel plate, as well as aluminum, brass and copper scrap. Condition of baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic wiring diagram). Inspection by appointment is possible. We assume no liability for technical data or possible errors.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: semi-otomatis, Diameter pipa (maks.): 60 mm, panjang mandrel: 6.000 mm, tahun perombakan terakhir: 2025, Perlengkapan: Penandaan CE, henti darurat, Mandrel Bending Machine S6006 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5 x D. → Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Tube feeding length 6 m Robust and durable steel construction with a friction-locked design – no torsion-prone construction due to, e.g., a split construction of bending head and mandrel support. Maintenance-free electromechanical drive for the bending axis. The touch display of the control unit allows for easy and intuitive programming and operation of the machine. After sliding the tube in, it is clamped by the chuck in the carriage, ensuring precise positioning of the tube and thus the creation of dimensionally accurate geometries. Standard equipment also includes a tube geometry check before the bending process: if the bending process is started at an incorrect position, the machine will not grant approval. This eliminates operating errors. Optional additional features provide greater comfort and increase output, thus enhancing the system’s efficiency. Data exchange from the optional TBS-3D tube calculation program (PC version) is via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are provided as standard. Existing tube geometries can easily and quickly be converted, for example via the STEP format. Standard features: → Electromechanical drive for the bending axis, 2.2 kW → Rotational speed 2.9 rpm (=17°/sec.) → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 200 mm → Bending shaft diameter 50 mm Iiedew Sr Ucspfx Adqsh → Electronic length measurement ±0.1 mm → Electronic rotation measurement ±0.1° → Manual stop system (overrun stops in length) → Manual indexing system (15° increments for rotation) → Three-jaw chuck for tube clamping in the carriage → External control console PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transfer via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the control determines the feed values and bending angles automatically. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (rollers) → Radius extension Sample image shows a similar machine.

Kondisi: baru, Tahun pembuatan: 2025, Pressure blast cabinet DSK 15.15.20.RB75, available with or without roller conveyor. Blasting chamber dimensions: W=1150 mm, D=1150 mm, H=930 mm. Includes one TÜV-certified pressure vessel, 20-liter capacity, with a conical discharge hopper. One abrasive metering valve with pneumatically controlled abrasive quantity regulation. One integrated closing cone with guide tube. One compressed air connection with pneumatic shut-off valve and branch for control air. One pressure regulator for setting blast pressure. One blast hose DN19. One handpiece with boron carbide Venturi blast nozzle, 8 mm. One pair of blasting gloves. Dust extraction filter unit: 2000 m³/h, 2.2 kW. Iijdpfx Adega I R Eeqeh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of Manufacture: 12/2022 Isdpju Thkajfx Adqjih Drive Power (Shredder): 4 kW Drive Power (Compacting Screw): 7.5 kW Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW Total Connected Load: 12.6 kW Power Requirement: 32 A Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material) Block Weight After Compaction: approx. 300 kg/m³ (material dependent) Block Dimensions: 320 x 320 mm, length variable Throughput Capacity: approx. 100 kg/hour (depending on material) Achievable Density: approx. 250 – 300 kg/m³ Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film. Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport Weight (Compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug. Scope of Delivery: 1 piece EPS compactor, ready for connection and operation. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors Iijdpettah Refx Adqjh → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: siap digunakan (bekas), Kontainer sewa sandblasting 20 kaki dengan mesin sandblasting tekanan, sistem filter, dan perlengkapan keselamatan Ijdsxl Dq Uspfx Adqsih

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 56.748 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.400 kg, lebar rotor: 1.600 mm, daya: 45 kW (61,18 hp), kecepatan rotasi (maks.): 107 rpm, lingkaran penerbangan rotor: 380 mm, lebar kerja: 1.600 mm, lebar bilah: 40 mm, en-01 Iiedpou Thabjfx Adqeh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Hand pipe bender HRB-3D 850 For bending pipes and solid material up to a maximum of 12 mm. Precise and repeatable bending is ensured by three battery-powered digital displays, which show the bending angle, pipe feed, and pipe rotation accurately. - Three-jaw chuck 80 mm - Stop system for feed - Feed length approx. 850 mm Iisdpfx Adettagdsqsh The hand pipe bender should be securely mounted on a table or frame (not included in the scope of delivery). We are happy to provide you with a detailed offer. Please send us your complete company address including email and contact person.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya: 9,7 kW (13,19 hp), Technical Data Cardboard Shredders (2-Shaft Shredders): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2011 (38,761 h), 2007 (52,386 h), 2007 (52,998 h), and 2007 (55,325 h) - operating hours as of November 2021 Throughput volume: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder internal dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions without hood: 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Iiodpfx Aeu Tha Isdqsh Areas of Application: The four Presto PZA cardboard shredders were in operation until 15/12/2021 at a Dutch logistics center, where they processed loose, upright boxes from the returns department, shredding them before pressing into bales. Boxes were manually fed onto the infeed conveyor and transported directly via a belt conveyor to the shredder for processing. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 4 units Presto Cardboard Shredders (2-shaft shredder), type PZA Remarks: The cardboard shredders were a fundamental part of the disposal line and were well maintained to ensure high availability in the returns department. The machines are in good condition and ready for immediate use. Price is per unit ex works from our warehouse in Siddeburen, Netherlands. Complete documentation (operating manual, CE declaration, elect./hydr. circuit diagrams) is available. Inspection can be arranged by appointment. No liability is accepted for technical details or potential errors.

Tahun pembuatan: 2015, Kondisi: diremaj di bengkel (bekas), Technical data for feed hopper with hydraulic moving floor and sack opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feed hopper with sack opener was in operation at a large recycling facility, where bagged waste was loaded into the hopper with wheel loaders. The bags were opened by the sack opener, and the waste was metered for further processing. The unit operated flawlessly until it was dismantled and replaced by a larger, higher-throughput system. Remarks: The machine is currently undergoing refurbishment in our workshop. The photos show the machine at its current stage of refurbishment, so it is not yet fully assembled. After completion of the refurbishment work, expected in February 2025, the machine will be tested under operating conditions without material. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Viewing by appointment is possible. We accept no liability for the technical specifications or possible errors. Iedpfsu R Rtbjx Adqsih

Kondisi: bekas, Technical Data IFE Cascade Screen (Vibrating Waste Screen): Iijdpfxeu Tg Rre Adqeh Manufacturer: IFE Aufbereitungstechnik GmbH, Austria Type: SM 2400 x 5000 F – UW30 Year of manufacture: 2009 Drive motor: 22 kW Rated current: 43 A Overall screening area: 5,000 x 2,400 mm (L x W) Dimensions per screen segment: 950 x 800 x 130 mm (L x W x D) Screen aperture grid: 150 x 125 mm Length of screen fingers (steel pipes in front of the screen segments): 400 mm Max. stroke: 18.5 mm Weight: approx. 6,600 kg Applications: This waste screen is suitable for use in systems for the sorting of municipal, commercial and industrial waste, paper and cardboard, scrap metal, and electronic scrap. The screen is designed for clog-free operation even with the most challenging input materials, delivering high throughput capacity. It prevents the formation of long stringers in oversize material, ensures loosened discharge of oversize material across the full screen width, and eliminates downtime for screen cleaning—these are the key advantages of this screening technology. Note: Over time, the screen plates/segments were covered with steel sheets (without screening function) for use in a paper sorting facility. The steel plates are only tack-welded and can be removed. Remarks regarding the entire line: Technical documentation for the machine is available exclusively in German. Inspection of the equipment is possible by appointment. We assume no liability for the technical data or any possible errors.