Beli Eitec Gmbh bekas (70.277)

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, posisi kepala milling: mittig, kecepatan spindel (maks.): 60.000 rpm, tinggi total: 1.550 mm, panjang total: 1.870 mm, lebar total: 1.040 mm, kecepatan rotasi (maks.): 60.000 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 560 kg, jangkauan kerja: 420 mm, tahun perombakan terakhir: 2025, masa garansi: 12 bulan, jenis penggerak: Linearmotor, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Semi-automatic depaneling / base unit with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of modern production processes. PCB panels of various materials are separated by cutting and routing techniques that minimize dust and mechanical stress, ensuring maximum product flexibility, precision, and throughput. High-dynamic linear motor axes, tools, and grippers fulfill the highest quality requirements, guaranteeing the depaneling machine exceptional durability and reliability. Semi-automatic depaneling – tailored solutions The LOW 4322 depaneler allows for rapid product changeover while maintaining short cycle and handling times. PCBs are loaded using a parallel shuttle; placement and securing are achieved via pin clamping technology, combined with vacuum suction units when necessary. Made in Germany The machine is equipped with: • Shaft and disc tool separation module mounted on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measurement system • Dual loading module configured as a parallel shuttle, left and right separated with sliding doors • Profile frame with two maintenance doors – left and right, ESD-compliant • Standard vision system base module for teach-in programming • Working area: 420 x 330 mm per side • Automatic milling bit length offset management • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Milling bit breakage detection (shaft milling bits only) • Ready for vacuum clamping technology • Disc and sliding doors are ESD-compliant Bjdpfext Dk Rjx Aarjlr Optional: A dust extraction unit can be retrofitted on request.

Kondisi: bekas, Tahun pembuatan: 2016, lebar total: 1.000 mm, tinggi total: 1.200 mm, Control Cabinet/Electrical Control Cabinet/Conveyor Technology Manufacturer: RBS Förderanlagen GmbH Year of Manufacture: 2016 Condition: used Model: Schaltschrank-Rittal Overall height: approx. 1200 mm Overall width: approx. 1000 mm Overall depth: approx. 300 mm Total height including feet: approx. 2000 mm The conveyor system was operational until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics Blodpfxexw N S Uj Aarer Whether you need roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide a custom quote or support you in planning and installation queries. Simply inform us of your specific requirements and your on-site circumstances. Take advantage of our many years of experience and our extensive network of experts. We have successfully implemented projects for companies from various industries, such as logistics, pharmaceuticals, trade, and the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or supplementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Kondisi: sangat baik (bekas), Regulator pengikut 3 fasa untuk beban tidak simetris (regulator arus untuk tegangan konstan) Data lainnya: lihat foto nameplate Bsdsxtu Tijpfx Aarolr

Kondisi: baru, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 150 mm, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 2.200 W, jumlah spindel: 1, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – Powerful, Versatile & In Stock! Features (Premium Configuration): 💨 2.2 kW Milling Spindle (water-cooled) – powerful and quiet during continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movement & smooth running 💧 Minimum Quantity Lubrication – extends tool life and reduces maintenance effort 🌪️ Dust Extraction Hood – clean work area & clear visibility when milling 🔄 4th Axis D 80 mm × 900 mm – ideal for cylindrical parts, engraving & 3D machining ❄️ Cooling System for Milling Spindle – consistent temperature for a long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of large or small workpieces 💻 Control Software Included – Plug & Play: connect, start, mill! 📐 Technical Data: * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Traversing speed: up to 8,000 mm/min * Guide system: Hiwin linear guides, size 20 mm * Drive: TBI ball screw spindles * Machine table: Cast iron T-slot/vacuum table combination * Frame: Welded steel base, CNC machined for flatness & stability Bljdpfx Aexwdkrsaror 🚀 Your Benefits at a Glance: ✅ In stock – immediately available & delivered ready for operation! ✅ Compact size with industrial precision – perfect for workshops & small batch production ✅ High performance for wood, plastics, aluminum & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible with 4th axis & vacuum table – for flat and round workpieces ✅ User-friendly control – fast setup & easy operation 🪵 Ideal for: Joineries • Model Makers • Signmaking • Prototype Construction • Plastics & Aluminum Machining 📦 Get Yours Now! The CNC4ALL Professional 1200 × 600 offers precision, performance and reliability in a compact format – in stock & ready for immediate use. 👉 Contact us now for your personal quote or a demonstration in our showroom.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, jam operasional: 500 h, nomor mesin/kendaraan: 22-014, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Price negotiable! Bljdpfjqabm Eex Aarjr

Tahun pembuatan: 2008, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 346100, en-1 Bledpfx Aaexwvruerjr

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Connection: 3.55 kW / 230 V / 50 Hz External dimensions W x D x H: 945 x 830 x 1025 mm External dimensions W x D x H (open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Spray rate: 4,200 l/h Load capacity: 100 kg The soiled items to be cleaned are placed in the rotating wash basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the washing solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump assemblies draw the washing solution from the wash tank and distribute it through 6 stainless steel spray pipes equipped with overlapping flat spray nozzles. The items being cleaned are intensively sprayed from all sides with the hot solution during the consistent rotation of the basket, which is driven by the spray jets. After the cleaning process is complete, the unit switches off automatically. Advantages 1 horizontally mounted pump Flow rate: 70 L/min 3 three-dimensional spray pipes made of stainless steel robust stainless steel design additional stainless steel small parts cleaning basket (Ø 170 mm) rotating stainless steel wash basket, water jet driven steam extraction Bedpfx Aoxiwc Sjarelr stainless steel perforated sheet with filter inlets above the wash tank low water level safety device

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, panjang total: 800 mm, lebar total: 920 mm, lebar transportasi: 680 mm, Pneumatic lifter including roller conveyor/lifter Manufacturer: RBS Förderanlagen GmbH Year of manufacture: 2016 Condition: used Model/Drive type: Pneumatic Total length of lifter: approx. 800 mm Total width: approx. 920 mm Bsdpjxw N R Rofx Aarjlr Conveying width: approx. 680 mm Roller conveyor section: Total length: approx. 1200 mm Total width: approx. 750 mm Conveying width: approx. 680 mm Stock: 2 units Price per unit The conveyor system was operational until dismantling. Thanks to the outstanding build quality, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics needs. Whether for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide a customised quotation or advise you on the planning or installation. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trade, and electronics. Together we will develop ways to optimise your workflow and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers. Specifications: Condition: Fully functional, with signs of wear Ideal for rapid material transport Professionally dismantled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) Supplier: Lager-und Fördertechnik Namoni 47800 Krefeld, Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.200 mm, rentang pengukuran sumbu Z: 700 mm, Zeiss Prismo VAST XT Tahun pembuatan: 2003 Retrofit Area pengukuran: X= 900 mm, Y= 1200 mm, Z= 700 mm Kontrol C99 dengan panel operator Kepala pengukur VAST XT Kepala pengukur VAST GOLD opsional Majalah pergantian probe 13 slot Piringan pergantian probe Aksesori probe Bola kalibrasi Dokumentasi teknis Aksesori tambahan Workstation HP dengan monitor Perangkat lunak Calypso Basic versi terbaru Opsi tambahan sesuai pilihan Tersedia dalam waktu singkat Bledpfowyukdsx Aarer Pengiriman tanpa sistem pemuatan otomatis yang terlihat pada gambar

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 200 mm, gerak cepat sumbu X: 25.000 m/menit, pergeseran cepat sumbu Y: 25.000 m/menit, pergerakan cepat sumbu Z: 25.000 m/menit, panjang benda kerja (maks.): 3.000 mm, lebar benda kerja (maks.): 1.500 mm, berat keseluruhan: 1.600 kg, kecepatan spindel (min.): 12.000 rpm, kecepatan spindel (maks.): 24.000 rpm, pasokan pendingin: 3 batang, jumlah spindel: 1, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 🚀 CNC4ALL Industry 3000 × 1500 Milling Machine / Gantry Milling Machine High-Performance CNC Milling Machine – In Stock & Ready for Operation! Premium Features: 💪 5.5 kW Spindle Motor (water-cooled) – robust power for precise machining of wood, plastics, aluminum & composite materials ⚙️ Servo motors on all axes – high dynamics, precise repeatability, and smooth operation 🧲 Vacuum pump (side channel blower) – optimal workpiece clamping on the vacuum table, even for large-format materials 🌪️ Extraction hood – keeps the workspace clean 💧 Minimum quantity lubrication – extends tool life, reduces coolant consumption, and ensures clean results 🔧 Technical Highlights * Working area: 3000 × 1500 × 200 mm * Repeatability: ± 0.03 mm * Traversing speed: up to 25,000 mm/min * Rigid welded steel frame for maximum stability * Hiwin linear guides and rack & pinion/ball screw drives for precise motion * Controller with user-friendly CNC software (included) Blsdpfx Asxwc Ipsarjr ✅ Your Benefits * Immediately available – no lead time! * Delivered fully operational – just connect, power on, and start milling * Ideal for joiners, sign makers, and industrial companies * Efficient, quiet, and low-maintenance – suitable for continuous professional use 📞 Get information & secure your quote now! The CNC4ALL Industry 3000 × 1500 combines power, precision, and reliability in industrial quality – and is immediately ready for operation in your facility. 👉 Contact us now for a tailored quotation or a live demonstration in our showroom

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Layar multicolor untuk pengaturan yang mudah Pengaturan awal jumlah produk yang akan dikemas Penghitung total produk terintegrasi (dengan opsi reset) Penggantian rol dalam waktu kurang dari satu menit Penyegelan dengan pedal kaki, otomatis atau manual Sistem konveyor untuk pengisian kantong otomatis tersedia berdasarkan permintaan Spesifikasi Teknis Panjang kantong maksimum: 450 mm Lebar kantong maksimum: 250 mm Ketebalan kantong maksimum: 0,04–0,1 mm per lapis Kecepatan pengemasan: hingga 25 pcs/menit Bljdpsxlzr Aefx Aarsr Tegangan suplai: 1Ph, 220 V, 50 Hz Daya total: sekitar 1 kW Berat mesin: sekitar 70 kg (termasuk printer) Dimensi mesin: sekitar 670 × 665 × 860 mm Area cetak: 53 × 75 mm Jenis kantong: kantong rantai pada rol

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, BHS Rotor Impact Mill, tahun pembuatan 2000 – bekas, berfungsi Bedpfsxhgp Ssx Aarolr

Kondisi: bekas, Tahun pembuatan: 2004, übersicht-dr-datz-2004 Bsdpfoxrfzhsx Aarelr

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 14 kg, masa garansi: 12 bulan, tegangan masuk: 230 V, panjang total: 420 mm, tinggi total: 450 mm, lebar total: 245 mm, laju aliran volumetrik: 420 m³/jam, Perlengkapan: kebisingan rendah, sasis, Smoke extraction unit with remote control and extraction hose Air inlet interface: Flange Blodpoxrgl Iofx Aarer Max. power: 300W Airflow speed: 24 m/s Filtration efficiency: 0.3 µm / 99.97% Noise level:

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 10 kg, jangkauan lengan: 1.418 mm, produsen pengendali: FANUC, model controller: R-30iB Plus, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 0,05 mm, masa garansi: 6 bulan, Perlengkapan: dokumentasi / manual, Sel otomatisasi bergerak GEWA "RoboFlex 10", terdiri dari... - FANUC CRX10iA - Kontroler R-30iB Plus - Tablet Teach Pendant - Rangka dasar termasuk 5 grid Bljdpjxrknmofx Aarjr - Tanpa gripper (opsional tersedia) Sel ini berada di lokasi kami di Eifel dan dapat diperiksa dalam kondisi bertegangan. Penjadwalan janji temu sebelumnya diperlukan. OPSIONAL: Koneksi RoboFlex ke mesin perkakas Anda - Konfigurasi antarmuka otomatisasi - Instalasi dan commissioning - Pelatihan operator (2 jam) - Uji coba dan serah terima dengan pelanggan Kami dengan senang hati akan membuatkan penawaran sesuai kebutuhan untuk Anda.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: SNR 020559121, jenis arus masuk: tiga fasa, tegangan masuk: 360 V, Perlengkapan: kompresor, 4 kantong pelipatan pengalihan Data teknis: Panjang lipatan: 3,5 cm Kapasitas: 200 m/menit Format kertas: maks. 38x65 cm; min. 10x12 cm Berat kertas: 40–250 g/m² pada pelipatan paralel tunggal Bledjxv Aqhepfx Aarsr Tegangan jaringan: 3x400V / 50Hz / N / PE atau 230V dengan feeder friksi dan satu unit pelipatan Konsumsi arus: maks. 10A

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 1160821, en-BA-600-2-CNC-Horizontal-Milling-and-Boring-Center-SW-Schwaebi sche-Werkzeugmaschinen-GmbH-Machine-No-166-0821-Year-2008-Used-Op erational-Traverse-Paths-X-Axis-600-mm-Y-Axis-shuttle-position-60 0-975-mm-Z-Axis-500-mm-Control-Siemens-840D-control-panel-mounted -on-side-Feed-Rapid-traverse-X-Y-Z-1-45000-mm-min-Max-feed-force- X-Y-Z-15000-N-Average-Acceleration-X-Y-Z-2-5-m-s2-Measurement-Sys tem-Absolute-linear-measurement-system-X-Y-Z-Spindles-Spindle-spe ed-infinite-variable-20-10-000-rpm-Torque-2-x-363-Nm-S6-40-ED-Pow er-2-x-38-kW-S6-40-ED-HSK-A-100-horizontal-side-by-side-spindle-a rrangement-Spindle-distance-600-mm-Spindle-bearing-diameter-100-m m-Motor-spindles-liquid-cooled-AC-technology-Working-Area-Swiveli ng-carrier-with-helical-gearing-max-load-capacity-2000-kg-Swivel- time-0-180-degrees-approx-6-0-sec-Partition-between-machining-and -loading-area-Tool-magazine-2-x-40-tools-HSK-A-100-chain-magazine -position-coded-Automatic-pickup-Tool-change-time-chip-to-chip-4- 9-sec-Max-tool-diameter-100-mm-250-mm-with-adjacent-position-free -Max-tool-length-350-mm-Max-tool-weight-20-kg-Equipment-Central-l ubrication-Minimal-quantity-oil-lubrication-spindle-lubrication-C hip-conveyor-Connection-for-central-coolant-system-Hydraulic-syst em-Service-unit-Water-chiller-Fully-enclosed-design-crane-loading -possible-Dimensions-with-paper-band-filter-approx-5-15-x-8-50-x- 4-20-m-Weight-approx-20-000-kg-Dimensions-without-paper-band-filt er-approx-5-15-x-6-60-x-4-20-m-Other-information-Age-appropriate- good-condition-Annual-maintenance-performed-regularly-by-previous -owner-Sale-without-clamping-devices-Without-foundation-parts-Imm ediately-available-date-by-agreement-EXW-72793-Pfullingen-Dismant led-into-main-components-Transport-to-installation-site-by-custom er-buyer-Dimensions-transport-dimensions-of-main-machine-componen ts-1-pc-Machine-unit-X-Y-Z-mm-3800-x-3350-x-3400-approx-13000kg-1 -pc-Table-unit-mm-4400-x-2400-x-3400-approx-10000-kg-Plus-periphe rals-such-as-chip-conveyors-small-parts-sheet-metal-etc-Short-del ivery-time-possible-date-by-agreement Blsdpfoxqrvvsx Aaror

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Beckhoff Automation GmbH & Co. KG PC Industri Rak 19 Inci, C5102 0060 Model: C51020060 Kondisi: Bekas Spesifikasi Teknis: 100-240V AC 50-60Hz 6-3A Bedpexq Eicsfx Aarslr Umum: Mainboard: CB1061-0001 CPU: Core i7-4770TE 2,3GHz Memori: 2x 4096MB DDR3L-RAM SO Harddisk 0: 3,5" 1 TB SATA-III Harddisk 1: 3,5" 1 TB SATA-III CD ROM: Multi-DVD DV-W5600S Windows 7 ULT EMB X32/X64 OEM Software Casing ATX 7-slot untuk rack 19 inci, 4U semua slot mendukung kartu ekspansi panjang penuh pintu depan dapat dikunci penahan kartu Perlindungan IP60 saat beroperasi Rentang suhu operasi: 0...55 °C.

Tahun pembuatan: 2025, Kondisi: baru, For separating and sorting according to specific weight into light and heavy fractions. Suitable for applications ranging from grain, aluminium/plastics, rubber/textiles, to cable recycling, etc. Type and size selectable depending on product and throughput. With an approximately constant machine length, working widths of 450mm, 600mm, or 900mm are available. Bsdpfx Aaebbr Ipjrelr

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, berat keseluruhan: 150 kg, tinggi total: 2.300 mm, panjang total: 1.200 mm, lebar total: 600 mm, kapasitas beban per penyangga: 5 kg, jangkauan kerja: 400 mm, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Bjdpfx Aexrgkwearelr Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2025, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, pergerakan cepat sumbu Z: 60 m/menit, model controller: Simens Sinumerik 840 D SL mit Handterminal HT 2, panjang benda kerja (maks.): 3.500 mm, lebar benda kerja (maks.): 1.500 mm, tinggi benda kerja (maks.): 700 mm, kecepatan spindel (min.): 12.000 rpm, kecepatan spindel (maks.): 24.000 rpm, CNC machines by HG GRIMME SysTech – CNC 5-Axis Milling Machine G-S-F/Universal Ideal for: Applications in model and mould making, as well as milling operations for other materials – versatile powerhouse with a rapid traverse speed of 80 m/min Bsdpfevcax Tex Aarolr Materials: Plastics, composites such as CFRP / GFRP, model making materials, aluminium Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary engineering, boat building, automation _____ Reference number: 1204 Availability: April 2025 Model: 5-Axis CNC Milling Machine G-S-F/Uni Spindle data: 13 kW / 10.3 Nm; 12,000–24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions: 3500 x 1500 x 700 Control: Siemens Sinumerik 840 D SL with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other features: pneumatic sliding gate Year of manufacture: 2025 Condition: new

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.064 mm, daya laser: 60 W, jenis pendinginan: udara, berat keseluruhan: 35 kg, masa garansi: 12 bulan, panjang area pemindaian: 220 mm, lebar area pemindaian: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Series Production & Automation GLT – Grossmann Lasertechnik GmbH Bodsxvtu Dspfx Aarjlr Made in Germany • Automated • Industry 4.0 Ready The Integra Fiber Laser is a fully integrated laser marking system for industrial series manufacturing, designed for high throughput rates, precision, and process reliability. Combining fiber laser technology, integrated PLC, and modular machine architecture, the Integra is ideal for production lines, custom machinery, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-Theta lens for maximum engraving speed • Working area: 100×100 mm up to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: Camera systems, pallet handling, conveyor belt integration • CE certified, low maintenance, suitable for continuous operation Advantages • Integration system "Made in Germany" – directly from the manufacturer • Custom machine building & automation per customer specifications • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminum, brass, plastics, and many more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machinery Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation, and commissioning across Europe • Lifetime after-sales support including remote maintenance

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, • Travel distances: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 530 control system with HR 410 handwheel • NC rotary table for multi-side machining, 1600 mm x 1250 mm • 1-axis NC universal boring and milling head for simultaneous and positioning operation (A-axis, 45° axis) • Motor spindle: maximum 7,000 rpm, SK 50 taper, 530 Nm spindle torque • Tool changer system for SK 50, 40 positions, accommodates tools up to 400 mm in length • Chip augers along the X-axis for optimal chip evacuation • Chip conveyor (hinged belt type) for transverse evacuation, manufacturer: Knoll, discharge at the front Bjdoxmr Uwspfx Aarelr • Coolant system, 950 l capacity, manufacturer: Knoll • External/internal air supply at the spindle • ICS (internal coolant supply) 60 bar for deep hole machining • Operating mode 4 • Fully enclosed machine cabin with safety glass sliding doors, optimized for crane loading • Split sliding doors at the front • Split sliding doors on operator side • Wireless probing system RMP 60 • Including cleaning gun • Short delivery time upon request; subject to prior sale • Used machine • Z-axis ball screw replaced, including bearings, in September 2023 • Optional: clamping elements and anchor rods • Optional: commissioning/setup • Optional: transport

Kondisi: baru, Tahun pembuatan: 2025, Five-Axis CNC Milling Center – 3D CNC Machining Center > The CNC milling system ‘Basis’ is the ideal entry-level model for machining plastics, composite materials such as CFRP, model building materials, or aluminum. > High feed rates, a compact 5-axis milling head for spatial machining, and top-class milling results: The machine is individually configured to your material requirements prior to delivery. This ensures excellent surface quality and outstanding machining results with all materials. > Using a fixture from HG GRIMME SysTech, the milling quality can be further significantly enhanced. Existing fixtures or tables can continue to be used at any time. > Modular expansion stages: The CNC machine can be upgraded at any time. Individual requirements can also be quickly implemented. For example, with an optional partition wall, one half of the table can be loaded and unloaded while machining takes place on the second half. This technology accelerates the production cycle. > Safe operation: The safety cabin, even in the basic configuration, features a large access area and can optionally be equipped with a noise reduction package. All drives and guides are protected and located above the work area. We offer around 365 options to tailor your CNC machining center precisely to your workpiece and material. The base machine can be expanded at any time. > Basic Version of the CNC Machining Center • Cabin with sliding doors, automatic pneumatic opening • High-performance NUM Flexium+ CNC control with handheld terminal (nPad) and 19`` graphical display • Tool changer system with 13 positions, externally loadable • Bellows dust protection on Z-axis • Cooling unit Workpiece Envelope X/Y and Z • 2,500 x 1,000 x 600 mm (plus 162 mm base) Travel Range X/Y and Z • 3,100 x 1,600 x 910 mm Rotary Axis Travel Ranges (A and C) • C-axis rotation: 540° • A-axis swivel: ±110° Speeds • Rapid traverse, linear axes X/Y: 80 m/min • Rapid traverse, linear axis Z: 30 m/min • Rapid traverse, rotary axes A/C: 10,800°/min / 18,000°/min Accuracies • Positioning accuracy: ±0.045 mm Bodpfx Aexdwn Rsarelr • Repeatability: ±0.040 mm Milling Spindle • High-frequency milling spindle, 9 kW for continuous operation (S6) • High-frequency milling spindle, 8 kW for continuous operation (S1) • Max. speed: 36,000 rpm • Tool holder: HSK E 40 Machine Weight: • Approx. 8,000 kg Included Special Equipment • Vacuum pump and vacuum system, 1x 6-fold • Knee switch, 1x • Ethernet and remote maintenance • 3D spline • 3D head data • T-Box interface

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 12.000 rpm, kecepatan spindel (maks.): 36.000 rpm, de-hu-01 Bedpjxdwndsfx Aarelr