Beli Elumatec bekas (92)

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 2004 Elumatec AKS 134 Gehrungssäge – Hochpräzises Gehrungsschneiden für Fassaden, Oberlichter & Wintergärten Hersteller: Elumatec Modell: AKS 134 Baujahr: 2004 Zustand: Sehr gut Jetzt verfügbar: Elumatec AKS 134 Gehrungssäge, Baujahr 2004, in sehr gutem Zustand. Diese robuste, deutsche Qualitätsmaschine ist speziell für das präzise Ausklinken von Aluminiumprofilen entwickelt und richtet sich an Verarbeiter von Fassaden, Wintergärten, Oberlichtern sowie komplexen architektonischen Aluminiumsystemen. Die AKS 134 verfügt über ein Doppelsägesystem – vertikale und horizontale Einheit – und bietet dadurch maximale Flexibilität, genaue Winkelschnitte und hohe Arbeitssicherheit. Durch digitale Winkelanzeigen, hydro-pneumatischen Vorschub und automatische Schnittzyklen ist diese Maschine die Premiumwahl für anspruchsvolle Aluminiumverarbeiter. 🛠️ Wichtige Technische Daten: 🔻 Untere Vertikale Sägemaschine: Sägeblattdurchmesser: 550 mm Neigungsbereich: +45° (vorwärts) bis -60° (rückwärts) Max. Schnitthöhe: 210 mm Motorleistung: 3 kW (mit Motorbremse) Drehzahl: 2.800 U/min Manuelle Schwenkverstellung mit Digitalanzeige 400V, 3~, 50Hz 🔺 Obere Horizontale Sägemaschine: Sägeblattdurchmesser: 500 mm Neigungsbereich: +55° (nach unten) bis -60° (nach oben) Max. Ausklinktiefe: 190 mm Motorleistung: 3 kW (mit Motorbremse) Drehzahl: 2.800 U/min Verfahrweg: bis 830 mm Manuelle Schwenkverstellung mit Digitalanzeige 400V, 3~, 50Hz ⚙️ Maschinenmerkmale: Zwei Sägeblätter für vielseitige und komplexe Ausklinkarbeiten Das Werkstück bleibt fixiert – nur die Sägeeinheiten bewegen sich für höchste Präzision Gleichzeitige Höhenverstellung der vertikalen Sägemaschine via Handrad (mit Analoganzeige) Digitale Winkelanzeigen für beide Sägen und den Schwenkanschlag Manuell verstellbarer Auflagetisch Horizontale und vertikale pneumatische Werkstückspannung Automatischer Schnittzyklus bei 90° mit Zweihand-Sicherheitsschaltung für Winkelschnitte Hydro-pneumatischer Sägevorschub für gleichmäßige, saubere Schnitte Druckluftversorgung: 7 bar (35–45L pro Zyklus) 📏 Maschinenabmessungen & Gewicht: Dedpfx Asxyupkjg Noup Aufstellfläche: 3000 × 1420 × 1600 mm Gewicht: 1.250 kg 🏗️ Ideal für: Hersteller von Aluminiumfassaden und Vorhangfassaden Fertiger von Oberlichtern und Wintergärten Präzise Ausklinkarbeiten an Aluminiumprofilen Werkstattumgebungen mit hohem Volumenbedarf und vielseitigem Gehrungsbedarf 🧰 Zuverlässig, präzise und für anspruchsvolle Einsätze gebaut: Die Elumatec AKS 134 ist ein bewährtes Spitzenmodell in der architektonischen Aluminiumverarbeitung. Elumatec AKS 134 zu verkaufen Aluminium-Gehrungssäge Irland Fassaden-Ausklinkmaschine Elumatec Säge für Vorhangfassadensysteme Ausklinksäge für Aluminiumprofile Elumatec AKS 134 Spezifikationen 550 mm Ausklinksäge Doppelblattsäge für Ausklinkungen Gebrauchte Elumatec Maschinen Säge für Aluminiumkonstruktionen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 193 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 480 mm, jarak gerak sumbu Z: 340 mm, lebar pemotongan (maks.): 335 mm, panjang benda kerja (maks.): 6.000 mm, kecepatan spindle milling (maks.): 6.000 rpm, panjang bagian (maks.): 6.000 mm, TECHNICAL SPECIFICATIONS – Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control system: eluCAM graphical, Windows XP user interface Work stations: 2 independently operating stations Revolver tool changer: 8 tools, servo-driven Tool holder: BT 30 Disc milling cutter diameter: 180 mm Tool length: 150 mm (from mounting point) Travel distances Travel path X-axis: 7,200 mm (without end-face machining), 7,080 mm (with end-face machining) Travel path Y-axis: 480 mm Travel path Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min electrical connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT Two independent workstations with light curtain and camera system Dodpfjwprmzex Ag Nsup Fixed-angle milling head (not tiltable) for 2 tools, ER20A, up to 18,000 rpm Tiltable milling head 4 × 90°, ER20, up to 22,000 rpm Fixed-angle milling head for steel, ER20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide-tipped saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Coolant/lubrication unit for steel processing Disc milling cutter holder BT30, D=16 mm Disc mill D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL SPECIFICATIONS – Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inward, intermediate angles and acute 22.5° manually adjustable with digital display Cutting angle (tilting): pneumatically adjustable 90° and 45° inward Sawing direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilting: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic clamping Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electrical connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing safety guards Electronic positioning of heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotation and tilt angles Operation via Windows control system with 8.4" display and handwheel Saw blade cooling system included Saw unit with feed from below for optimal cutting force

Kondisi: sangat baik (bekas), Pengiriman dalam UE ~350 euro Duedpfx Ajl Skk Uog Njp

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, en-it-01 Dusdex Rvmuopfx Ag Nsp

Tahun pembuatan: 1992, jam operasional: 100 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Deskripsi Mesin crimper sudut untuk menekan profil dengan tinggi hingga 68 mm. Gaya penekanan yang sangat tinggi dicapai oleh silinder bellow berkapasitas besar (bebas perawatan). Mesin mudah disesuaikan dan dioperasikan. Bantalan lawan dapat diposisikan secara pneumatik dengan penguncian mekanis Lengan penyangga dan bilah penekan sudah termasuk dalam standar Pengoperasian dua tangan untuk keamanan Opsi Duedpfx Aex Rvl Rjg Nop Penopang tambahan Mata pisau penekan khusus Data Teknis Tinggi penekanan: 68 mm Gaya penekanan: 40 kN (4 t) Penggerak: Pneumatik Pasokan udara tekan: 7 bar Konsumsi udara per siklus: 30 l Dimensi (P × L × T): 650 × 820 × 1.270 mm Berat: 205 kg

Tahun pembuatan: 2006, Kondisi: bekas, 3-ACHS-BEARBEITUNGSZENTRUM-ALU-PVC Dodjx Ecfkopfx Ag Njup

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts Dujdpsuiy Nyofx Ag Nop - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Dsdeuiy Ngopfx Ag Njup The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12200991016, kecepatan rotasi (min.): 24.000 rpm, berat keseluruhan: 1.635 kg, berat alat: 2.900 g, tegangan masuk: 400 V, For economical and efficient machining of aluminium profiles, plastics, and thin-walled steel profiles All machining operations such as milling, drilling, and tapping are performed on a stationary profile, ensuring the surface is protected Improved performance thanks to intelligent control technology Rapid positioning of the machining unit at speeds up to 60 m/min due to dynamic servo drives Tapping without a compensating chuck Automatic clamp detection and positioning Automatic tool magazine with four tool stations (tools not included) Modern 3-axis control system Ergonomic operation provided by a modern inclined bed No axis referencing required due to the use of absolute encoder systems Collision avoidance via automatic clamp detection and positioning Power-Torque milling motor with closed-loop speed control for short spindle start-up and braking times Certified, integrated drive safety functions Low power consumption with intelligent control technology Higher energy efficiency thanks to linked axis drives between circuits Emergency power supply (UPS) Windows operating system 15.6" PC panel, i3 processor, USB ports, and network interface Easy and convenient program entry via eluCam on the operator panel – also during machining Online remote maintenance Machine Equipment Air-cooled 8 kW milling spindle, S1 Operator protection cabin Four horizontal pneumatic clamps for material fixation Material stop, left side HSK-F63 tool holder Minimal quantity lubrication High-performance coolant Manual control panel Depth template Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotary HSK-F63 angle head for two tools Green-line cooling unit for the control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with full enclosure Standard configuration with four clamps, expandable up to eight clamps Right reference material stop for positioning components with excess length machining Additional stop for excess length machining on the left side Dujdpfx Agowgmyqo Nep Double-sided length measurement Double clamp and additional accessories available upon request 18.5" PC panel, i5 processor 21.6" PC panel, i7 processor Note holder Sound-absorbing enclosure Chip disposal using chip trays

Tahun pembuatan: 2007, Kondisi: bekas, 5-Achs-Bearbeitungszentrum-Alu-PVC Djdoxwydbepfx Ag Noup

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, pl-hu-001 Dusdpfx Ajx E Rd Deg Njp

Tahun pembuatan: 2010, Kondisi: bekas, 4achs-bearbeitungszentrum-mit-8-fach-werkzeugwechsler Dujdpfxoxvp Nks Ag Nep

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1400040164, panjang benda kerja (maks.): 7.900 mm, kecepatan spindel (maks.): 21.000 rpm, Motor spindle telah dirombak total di pabrik beberapa tahun yang lalu dan sejak itu hanya beroperasi sekitar 100 jam. DETAIL TEKNIS Panjang benda kerja: 7.900 mm Kecepatan putar: 21.000 rpm DETAIL MESIN Pneumatik Tekanan: 8 bar Djdpjxy Hcijfx Ag Neup Data Listrik Jenis koneksi: 3/PEN Tegangan: 400 V Frekuensi: 50 Hz Arus: 24 A

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Dusdpfx Aex Diqwjg Nsp Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Tahun pembuatan: 1999, Kondisi: bekas, Mesin bekas Tahun pembuatan: 1999 Area frais besar meskipun desainnya ringkas Frais penyalinan menggunakan pembatas samping atau template dalam rasio 1:1 Dusdpfx Agoxqihio Nsp Penunjuk penyalin pneumatik dua tingkat untuk dua diameter pisau frais berbeda Suspensi tuas penyalin yang dipatenkan menjamin proses pemfraisaan presisi dengan sedikit tenaga Penyesuaian tinggi meja untuk profil sangat tinggi hingga 400 mm Penggantian alat sederhana dengan "Spindle lock" Sistem penjepit material pneumatik Unit semprotan dosis Opsi Template penyalin ter-frais untuk lubang gagang standar dan pemfraisaan PZ Penunjuk penyalin Collet penjepit Sistem pembatas Sistem penjepit material dengan 2 silinder penjepit Alat frais 8 mm Ketersediaan: segera Lokasi gudang: Flörsheim

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1340020469, Mesin pemotong ujung AKS 134/00 1 x mata gergaji Ø550mm Dujdpfx Agex A D Ihe Nop 1 x mata gergaji Ø500mm dilengkapi pembacaan digital untuk pengaturan sudut

Tahun pembuatan: 2010, Kondisi: bekas, 3-axis machining center with automatic tool changer for aluminum or PVC profiles Max. X-axis travel: 6,700 mm Dedpfxswwukxo Ag Nsup Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Control: Windows 10 with new PC in 2023 Spindle speed infinitely variable up to 24,000 rpm Handheld control unit Minimum quantity lubrication system Tool changer with 2 magazines (total of 10 tool positions plus angle head) Clamp detection and clamp shifting 2 pneumatically folding material stops and 2 light barrier areas enable pendulum operation A total of 8 material clamps Spindle in very good condition, spindle draw-in force: 12.5 kN Safety fence dismantled, demonstration possible by arrangement Weight: approx. 3,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, en bon état de fonctionnement, DG244/E555/1, 6 mètres Dusdpfx Astuvg Dsg Nop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050285, jarak pergerakan sumbu X: 7.800 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 630 mm, kecepatan spindel (maks.): 24.000 rpm, jumlah slot dalam magazin alat: 14, translation_01 Dusdpfxjxx Uf Ne Ag Nsp

Tahun pembuatan: 2003, Kondisi: bekas, 4-axis machining center with 8-position tool changer for aluminum or PVC profiles Maximum machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° max. Spindle speed: 21,000 rpm Windows operating system Minimum quantity lubrication system Clamp detection and automatic positioning Chip conveyor integrated in the bed Dujdouwq S Dspfx Ag Njp Chip extraction system Pendulum operation via two light barrier zones Loading is included in the price Weight: approx. 4,500 kg

Tahun pembuatan: 2007, Kondisi: bekas, 3-axis machining center with automatic 8-position tool changer for aluminum or PVC profiles Max. X-axis travel: 4200 mm Duedpfx Aow Axfqeg Nsp Max. Y-axis travel: 480 mm Max. Z-axis travel: 325 mm E 500 control system Continuously variable spindle speed up to 6,000 rpm Handheld control unit Minimum quantity lubrication system Double-sided angle head and a high-speed spindle Clamp detection 8 pneumatic workpiece clamps Light barrier

Tahun pembuatan: 2006, Kondisi: bekas, 3-axis machining centre with automatic 8-position tool changer for aluminium, PVC, or steel profiles Max. machining length: 7200 mm Max. Y-axis travel: 480 mm Max. Z-axis travel: 325 mm Control system E 500 Continuously variable speed up to 6,000 rpm Minimum quantity lubrication system 2 angle heads High-speed spindle Clamp detection and repositioning 8 pneumatic material clamps Pendulum operation possible via 2 light curtain zones Loading included in the price Duedou T Nm Nopfx Ag Nop Weight: approx. 5,000 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, de Dedow Syzqopfx Ag Nsup

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), Maximum positioning length: 2600–3000 mm Stop and measuring system with E 255 control unit for positioning of cutting lengths Suitable for mounting on all single-head (right) saws Dsdofibfnjpfx Ag Njup

Tahun pembuatan: 2003, Kondisi: baik (bekas), Rollenbahn Elumatec 3000 mm Dodpfstpcrgex Ag Neup