Beli Emco Vmc 200 bekas (142)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 800 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: Ledpfx Aex E Dncjglohb • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, EMCO C40 Linear Tool Milling Machine with Digital Display and Path Control - Excellent Condition, CE Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 T-slot width: 14 mm H8 T-slot pitch: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speed: 10-5000 rpm >> Infinitely variable feed rate: 10-2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions: approx. 2.5 x 2 x 2 m Lhedpfx Aswxxdfeglsb >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Swing-away enclosure >> Coolant system >> Machine lamp >> Indexing head with tailstock >> Counter-support >> Röhm machine vice About the machine: For sale is an Emco C40 Linear tool milling machine with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal milling is very straightforward thanks to the pivoting vertical head. The Emco has been mechanically and electrically inspected at our facility. Take advantage of the opportunity to view and test the machine under power at our location.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tool Milling Machine Emco C40 Linear with Digital Readout, Path Control - Excellent Condition, CE Compliant!! Technical Specifications: >> Year of manufacture: 2008 | Machine no.: BA1DW2503 >> Milling table clamping area: 800 x 400 mm Clamping slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Max. table load: 300 kg Lhodpswxxd Eofx Aglsb >> Infinitely variable spindle speeds: 10-5000 rpm >> Infinitely variable feed rate: 10-2000 mm/min Rapid traverse X: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Approx. dimensions: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts lists, operating manual >> Enclosure (sliding cabin) >> Coolant system >> Machine lamp >> Indexing head with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered here is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in nearly new condition. It comes from a state-owned facility where it has seen very little use. The control system is very user-friendly. Additionally, the machine features hydraulic clamping both for vertical and horizontal operations. Conversion from vertical to horizontal is very straightforward, simply by swinging the vertical head aside. The Emco has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our facility.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Werkzeugfräsmaschine Emco Emcomat FB-450 Linear with Position Display – As New Condition, CE-Compliant! Technical Specifications: >> Year of manufacture: 2013 Machine no.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10-5000 rpm >> Infinitely variable feed rates: 10-5000 mm/min Rapid traverse (X-axis): 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (L x W x H): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Swing-type enclosure >> Coolant system >> Machine lamp >> Indexing head >> Rotary table >> Machine vice >> Steady rest About the machine: Offered for sale is a Emco Emcomat FB-450 Linear universal milling machine with position display. This universal milling machine is in like-new condition. It comes from a government facility, where it was only minimally used for training purposes. The control system is very easy to operate. In addition, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal configuration is very straightforward, thanks to the swiveling vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to inspect and test the machine under power at our facility. Lhedswycv Iopfx Agleb

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Lodpswvuf Tefx Aglehb Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm Ledjwag Stspfx Aglshb >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840Dsl, Description: Ledpfsw Tg Adjx Aglehb Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Sub Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Features/Accessories: Chip management: Chip conveyor Coolant management: High-pressure internal coolant pumps, 14 bar Barfeed: Short bar loader, EMCO LM 1200 Finished part removal: Workpiece picker (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, make Absolent Tool holders: Various static and driven holders Additional equipment: Spindle chiller unit

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Penggunaan Logam Lhedpfjyalhxex Agljb Jenis produk Mesin bubut Mode operasi Manual Nomor seri 8303059 Kecepatan spindle maksimum 2200 rpm Merek Emco Daya yang dibutuhkan (kW) 1,4 Negara dan wilayah produksi Austria Sumber energi Listrik Jenis kontrol Konvensional Berat mesin (kg) 300 Model/Tipe Maximat Super 11 Tahun produksi 1983

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Bubut Emco Super 11 CD. 380V, motor 3 tahap 2 kecepatan, operasi halus. Poros utama digerakkan melalui girboks, roda gigi berjalan dalam oli. 8 kecepatan spindle dapat diatur dari 55 hingga 2200 rpm. Girboks Norton untuk pemotongan ulir yang mudah. Gerakan otomatis memanjang dan melintang. Senter tailstock MK2. Pompa pendingin terletak di bagian belakang kabinet dasar. Pelindung chuck. Penukar alat pelepas cepat. Jarak antara senter: 650 mm. Tinggi senter: 140 mm. Diameter spindle: 35 mm. Ledpfx Aoyalrksgljhb

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Data teknis: Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat. Lhsdswyit Hopfx Aglob

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R7A V09, lubang spindel: 65 mm, saluran batang: 65 mm, Dijual dua pusat pemesinan CNC EMCO HYPERTURN 665, tahun 2005, lengkap dengan feeder batang. Mesin bubut dengan dua turret (keduanya memiliki alat berpenggerak) dan spindle lawan. Lubang spindle berdiameter 65 mm. Dengan banyak aksesori tambahan (feeder kepala, alat berpenggerak, dll.). Kedua mesin dirawat secara teratur dan dalam kondisi baik. Harga mesin dengan feeder FMB: €23.000. Harga mesin dengan feeder Hydrobar: €20.000. Lhjdpfxeyahils Agljb Jika membeli kedua mesin, harga total: €40.000.

Kondisi: baik (bekas), Tahun pembuatan: 1999,

Kondisi: baik (bekas), Tahun pembuatan: 1996, mosógép-emco-fräsmaschine-2024 Lodpfx Agjxvraxslehb

Kondisi: baik (bekas), Tahun pembuatan: 2006, Maschine wurde ausschließlich für Kunststoff verwendet. Technische Details sind im beigefügten PDF-Dokument ersichtlich. Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Lodpfxeu Ibihs Aglshb

Kondisi: bekas, Tahun pembuatan: 1999, Technical Details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MK3 Spindle torque: 350 Nm Max. workpiece weight – between centers: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions (LxWxH) approx.: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal carriage X-travel: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Lhedsu Ixw Aepfx Agljb Cross slide Y-travel: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Top slide swiveling right 60° and left 120° Thread cutting Machine lighting No coolant system (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Ledpfx Agou Ixwijlshb

Tahun pembuatan: 1982, Kondisi: bekas, Technical Details: Z-travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Dimensions (LxWxH) approx.: 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, with depth measurement operation mode, is offered for sale including a base cabinet (by Emco, specifically for hardness testers). The device is suitable for the following testing methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastics testing per DIN 53 456 Other materials to be tested only after consulting the manufacturer. Test forces: Electronically controlled via microprocessor, strain gauge, and DC motor (for M4R-075 = 49 to 7355 N) Test table Ø 90 mm height-adjustable via handwheel Test table mount per DIN 51 225 = Ø 25 mm Operation and programming via control panel with graphic-capable, illuminated LC display Accessories: Additional test tables/plates as shown in the photos Ljdou N Avxspfx Agljhb On request.

Kondisi: bekas, Tahun pembuatan: 2008, en Ljdpfjvvtpxjx Agljhb

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Table size: 800 x 400 mm Spindle speed range: 63 - 3150 rpm / 18 steps Infinitely variable feed: X/Y/Z: 8 - 800 / 8 steps mm/min Spindle taper: SK 4 Spindle head swivels left and right: 90° Quill stroke: 105 mm Total power requirement: 5.3 kW Machine weight approx.: 2245 kg Machine dimensions LxWxH: 2.1 x 2.8 x 1.9 m Control screen replaced with a new LCD. Lhsdpfx Agevbhcdsljb The milling machine is equipped with a PROTOTRAK MX2 digital readout system. The X and Y axes can be run in cycles (interpolating); the Z axis is operated manually. Spindle with forward/reverse rotation Automatic tool clamping via control command Coolant system (without tank) Chip collection tray Tooling accessories (as shown in photo) *

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Lodpsxzq Ncefx Aglshb Transport can be organized upon request!

Kondisi: baik (bekas), Alat Uji Kekerasan Tipe: M5U 300-030 Produsen: emco Kondisi: bekas, baik, tanpa garansi Ledpox U Dprefx Aglohb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Kontrol Heidenhain TNC 620 Perjalanan sumbu X/Y/Z: 350 x 250 x 300 mm Kecepatan spindle 12.000 min-1 Lodpfxox Rpaho Aglohb Meja putar dan miring Majalah alat untuk 50 alat, ISO 30 Konveyor serpihan Otomasi LANG

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A8A R19 52, panjang pembubutan: 225 mm, diameter putar di atas sled silang: 250 mm, diameter pembubutan: 80 mm, daya motor spindle: 4.400 W, kecepatan spindel (min.): 300 rpm, kecepatan spindel (maks.): 6.300 rpm, lubang spindel: 25 mm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 300 mm, Diameter batang (maks.): 25 mm, gores kuas bulu: 50 mm, Perlengkapan: dokumentasi / manual, Info tambahan: turret alat 12-stasiun untuk alat quick change VDI16, logika dua arah untuk alat berputar. Lhodpfxsxvb Thj Aglsb

Kondisi: sangat baik (bekas), EMCO precision lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: ø 340 mm Swing diameter over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed slide guideway length: 380 mm Tool cross-section: 20 x 20 mm Distance spindle centre – top slide: 34 mm Swivel range top slide (compound rest): 60 / 120° Main spindle: Spindle connection: DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper to DIN 7178 1 : 22 Spindle diameter at front bearing: ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Main drive: Power output at 40% duty cycle: 5.3 kW Max. rated torque at the main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Thread cutting: 20 (28) metric threads (standard): 0.4 - 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill taper: MT 3 Lhjdpjxx S R Ajfx Agleb Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weight (unsupported): 50 kg, with tailstock support: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: EMCO 3-axis digital readout with color display Potentiometer, emergency-stop button, digital speed display on control panel next to DRO 3-jaw chuck MULTIFIX tool post size B Electrically interlocked chuck guard Quick-action collet system MICROJET coolant spray system Chip guard Machine light Machine levelling feet Bed stop Condition: Very good, from a training workshop Note: Due to its quality and price, the machine is not suitable for private individuals. Available from March 2026.

Kondisi: baik (bekas), EMCO FB 3 Universal Milling Machine (not a DECKEL FP 1) with 3-Axis Digital Readout HEIDENHAIN Year of manufacture: 2007/2008 3 units available! Travel (X/Y/Z): 300 x 200 x 350 mm Spindle taper vertical/horizontal: SK 30 DIN 2080 Tool clamping: manual Quill stroke: 45 mm Vertical milling head swivels: +/- 90 degrees Spindle power: 1.1/1.4 kW (60/100% duty cycle) Speed (vertical/horizontal): 80 – 2,200 rpm Gear stages: 8 Fixed angle table: 600 x 200 mm Infinitely variable feed: X/Y-axis: 0-550 mm/min Rapid traverse: X/Y-axis: 1,200 mm/min Z-axis feed: manual Machine dimensions (W x D x H): 1,150 x 1,410 x 1,550 mm Weight: approx. 500 kg Standard equipment: - 3-axis HEIDENHAIN digital readout - Coolant unit integrated in machine base - Angle table - Manual central lubrication - Swing-away device for vertical spindle - Chip tray - Splash guard - CE compliant Special features: - HEIDENHAIN precision digital readout - Infinitely variable feed/rapid traverse in longitudinal and cross directions - Operator panel with clear keyboard for intuitive operation - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting, hardened gib strips - Removable coolant tank Additional equipment: - SEMER brand mist lubrication unit connected to coolant switch/standard coolant pump Application range: Ideal for instrument and prototype construction, training, workshops, and advanced DIY users The machines are from a training facility. Condition: good to very good Lhsdpfxsxx R Itj Aglsb Available from March 2026 (possibly earlier by arrangement)