Beli Ex Lampu Untuk Injeksi Kamar bekas (31.559)

Kondisi: bekas, Tahun pembuatan: 2003, Vertical injection molding machine designed for producing molded rubber and plastic components using the vulcanization method. Manufacturer: RUTIL Model: VERTICALE DAS 100/30 RP Year of manufacture: 2003 Technical specifications: Injection volume: 100 cm³ Injection pressure: 1,480 kg/cm² Nozzle diameter: 22 mm Hydraulic motor: 75 cm³ Max. operating pressure: 200 kg/cm² Heated plates: 350 x 300 mm Fedountc Eopfx Aagsfw Clamping force: 30 tons Minimum mold height: 130 mm Movable plate lifters: 350 mm Installed power: 21 kW Dimensions: width: 1,400 x 1,700 mm, height: 3,050 mm Weight: 3,300 kg Full technical documentation available. Technical condition: used machine, operational until decommissioned from production.

Kondisi: sangat baik (bekas), CTS Model: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in potentially explosive atmospheres in Zone 1. This means it is intended for use in environments where explosive atmospheres may arise. Such equipment is specially designed and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min Heat compensation: - approx. 3500 W at +20°C - approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specifications: Refrigeration unit: water-cooled, low-noise, fully hermetic, continuously variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert grid: Stainless steel, supporting surface 620 x 600 mm, maximum load per grid 35 kg, maximum total grid load 100 kg Control System: 32-bit controller LCD operating panel Digital display of set and actual values Numerical input of set values Plain text error messages RS 232 interface Ethernet interface Free switching channels for customer-specific test specimen control Dimensions: Ffsdpfoygui Ssx Aagsw Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level: [value missing]

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, Fungsionalitas: belum diuji, lebar total: 40.000 mm, panjang total: 9.000 mm, tinggi total: 7.000 mm, jenis arus masuk: tiga fasa, IBC-ontladings- en CIP-station EX, met dampafzuiging. Voorzien van 5 IBC-containers met lekbak, 2 productpompen, volledig uitgevoerd in RVS 316, ongebruikt. Lasdocumentatie en registratie beschikbaar. Inclusief Simatic-bedieningspaneel. Ffodpfx Aaora Dlpegow

Kondisi: bekas, Manufacturer: EATON Type: AB 12240 E Fedpsd N Sv Nefx Aagefw 36 units available New goods

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Silinder injeksi untuk karet Ffsdpsxuvgtsfx Aagjw Demag-Desna Tahun pembuatan sekitar 1999

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Model D2: Dimensi pelat yang dapat diukur: 100 - 1600 mm Pembagian skala: 1/2 mm Akurasi pengukuran: 1/2 mm (1/10 mm memungkinkan) Penyimpangan sudut: 1/2 mm Pencahayaan terintegrasi anti-silau: 3 lampu neon (174 Watt) Tegangan: 220 V – 50 Hz Dimensi luar (mm): 1775 x 1150 x 220 Berat (tanpa rangka besi): ± 86 kg Ffsdpfxoya Hflj Aagew Harga per unit: 3.000,- Tersedia 3 buah meja ukur tipe ini.

Kondisi: sangat baik (bekas), Complete screw cylinder with screw, cylinder head, and shut-off nozzle for Engel injection unit size ES3550 Fsdpefnqapsfx Aagsfw

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, The Wittmann automation system was newly installed in 2016 and used on a Netstal Synergy 2000. Ffedpfx Aajpm Htgjgew All documents, operating manuals, maintenance schedules, measurement diagrams, etc. are included, as well as control modules, power supply units, and control panels. The Wittmann picker can also be operated as a standalone unit. TECHNICAL DETAILS Travel path X / Y / Z: 900 / 1800 / 3000 mm Payload: 15 kg Scope of delivery: Robot, console, support V/2614-3104, adapter, standard MB conveyor system, SE protective enclosure including safety door with SIPA MACHINE DETAILS System dimensions (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE Mains voltage: 400 V Permissible voltage fluctuation: up to 10% Connected load: 11 kVA Frequency: 50-60 Hz Permissible frequency fluctuation: up to 2% Supply line fuse: 16 A Compressed air: max. 6 bar System operation maintained at: min. 5 bar

Kondisi: baik (bekas), panjang total: 1.350 mm, lebar total: 380 mm, Konveyor untuk mesin cetak injeksi Arburg kecil Panjang: 135 cm Fjdpfx Ajw U Aulsagofw Lebar: 38 cm Penggerak: hidrolik

Kondisi: baru, Filter cloths for all types of filter presses, available in all sizes and qualities. Short delivery times—contact us for more information. Location: 58762 Altena. Fsdpsg Azmmefx Aagofw

Kondisi: baru, Filter plates (250 x 250 mm, 300 x 300 mm, 400 x 400 mm, 470 x 470 mm, 500 x 500 mm, 630 x 630 mm, 760 x 760 mm, 800 x 800 mm, 1000 x 1000 mm, 1200 x 1200 mm, 1200 x 1600 mm, 1500 x 1500 mm) for all filter presses in all sizes and qualities, short delivery times, please contact us for enquiries. Fodeikl Uijpfx Aagofw Location: 58762 Altena

Kondisi: baik (bekas), balzers-lte-020 Fodpfsxl A Edjx Aagefw

Kondisi: diremaj di bengkel (bekas), We have a large stock of hydraulic valves for injection molding machinery. Ffedpet Hfw Ejfx Aagow

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0153, de Ffsdpfx Aasnxi H Ujgow

Kondisi: baru, Dijual motor listrik dari produsen ternama ATB Motorentechnik GmbH, dibuat di Jerman. Model CD160M-4, dengan sertifikasi tahan ledakan ATEX II 2G, cocok untuk digunakan dengan inverter. Spesifikasi teknis: • Daya: 11 kW • Tipe: CD160M-4 • Tegangan: 400 V Δ / 690 V Y • Arus: 21 A / 12,1 A • Frekuensi: 50 Hz • Putaran: 1460 rpm (4 kutub) • Cos φ: 0,85 • Kelas isolasi: F • Tingkat perlindungan: IP55 • Berat: 168 kg • Tahun produksi: 2007 • ATEX: II 2G EEx de IIC T4 – motor untuk area dengan risiko ledakan gas • Poros: diameter 42 mm, splined. Ffodpfx Aaexbd U Eegew

Tahun pembuatan: 2000, Kondisi: bekas, nomor mesin/kendaraan: 109920, Bitte teilen Sie uns Ihr Angebot mit. Der Preis versteht sich ohne Verpackung und Transport; Zahlung im Voraus. Wenn Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien. Der Käufer kann bei der Demontage der Maschine behilflich sein. Ffjdpfxjycvwij Aagow Der Käufer ist für den Transport der Maschine verantwortlich. Wir organisieren lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler oder Kran.

Kondisi: bekas, Tahun pembuatan: 1960, de-001 Ffjdpfx Aox U A Igoagjw

Kondisi: bekas, Tahun pembuatan: 1965, de_001 Fjdpsxylq Esfx Aagjfw

Tahun pembuatan: 2005, Kondisi: bekas, Tool holder 50 mm Driven tools: 5 units Non-driven tools: 4 units +++++ Please note that the machine is disassembled and ready for transport. For this reason, a powered demonstration or production of a video is not possible. Furthermore, our listing contains the most representative photos in the best possible quality. Unfortunately, it is not possible to provide any additional images. Fjdpfx Asgtyhrjagsfw +++++

Kondisi: siap digunakan (bekas), Sistem finishing vibrasi, Mesin gerinda geser, Mesin finishing vibrasi alur melingkar, Mesin bekas Pabrikan: Gránit-Ex Kft Tipe: FM-10, 1500 x 1500 Tahun: 2020 Berat: 600 kg d: 550 mm, Keliling: 1670 mm D: 1350 mm, Keliling: 3650 mm Torus: 350 mm Fodjxdfabepfx Aagjfw

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Maximum tool slide stroke 760 mm Ffsdsd Nw Ttspfx Aagew Maximum rack length 610 mm Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP

Kondisi: bekas, Ex-Cell-O XG620 Excello XG 620 Siemens CNC generalüberholt 2011 Dokumentation vorhanden Kugelrillenfräsen für Gleichlaufgelenke Ffodpfxeurt Tlo Aagew Diese Maschine kann in unserem Lager in Gussago (BS), Italien (Großraum Mailand) besichtigt werden.

Kondisi: bekas, Tahun pembuatan: 1987, Max. rolling pressure NA t Workpiece diameter 38 mm Workpiece length 500 mm Total power requirement 24 kW Machine weight approx. 10 t Space requirement approx. ... m Max. stroke of the upper/lower tool slide 760 mm Max. rack length approx. 610 mm Workpiece length between centers approx. 500 mm Max. gear width/profile width 92 mm Max. workpiece diameter 38 mm Fedpfx Ast Hw D Doagsfw Tailstock stroke on the boom (hydraulic) approx. 500 mm Module range min./max. 0.3 to 1.3 module Total drive approx. 24 kW - 380 V - 50 Hz Total weight approx. 10,000 kg Accessories / Special equipment: - KBH workpiece feeder installed parallel to the machine, currently configured for the loading and unloading of shaft-type workpieces approx. 16 mm Ø x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the area of the chucks, including workpiece position monitoring device. - Originally used for rolling the external gearing (Zz = 25) of so-called planet carriers (automotive), approx. 32 mm Ø x 14 mm long, workpiece Ø approx. 80 mm x 80 mm long. - Various accessories, separate control cabinet, separate 900 L hydraulic unit, coolant system integrated in the machine, control panel with plain-text fault diagnostics, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than hobbing. Workpieces are clamped between centers and profiled by synchronously counter-moving rack tools. The material is displaced and formed by the increasing profile height within the rack tool. Profile and surface quality are optimized in the calibration zone of the tool. No run-out – as is necessary with hobbing or shaping – is required. The machine features an extremely robust design. Tool life can reach 25,000 to 100,000 parts, even for helical gears. Condition: Very good – assembled in our warehouse and ready for demonstration Delivery: Ex-stock – as inspected Payment: Strictly net – after receipt of invoice We thank you for your order. Further cold rolling machines and other gear production machines permanently available.

Kondisi: bekas, Fungsionalitas: belum diuji, lubang spindel: 81 mm, diameter pembubutan di atas alas geser: 650 mm, tinggi pusat: 320 mm, panjang pembubutan: 1.500 mm, Used lathe as shown in the pictures. Equipped with Sony digital readout and 660 mm face plate. Year of manufacture: 1976. All technical data can be found in the last image. NOTE: The type plate indicates XD500, but according to dimensions and delivery note, it is actually an XD630. Fsdpfx Aaowm Rviogsfw Centre distance: 1,500 mm Bed length: 2,500 mm Centre height: 320 mm With taper turning attachment and side ruler.

Kondisi: baru, Tahun pembuatan: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettbereich/Ausnehmung: 700 mm Bettbreite: 340 mm Spitzenweite: 1500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2000 min⁻¹ Hauptspindelaufnahme: Bajonett 6 Spindelbohrung: 52 mm Ffedpfxswu Du Io Aagew Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechsel-Stahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselräder-Satz und Bedienungsanleitung