Beli Fz 37 bekas (3.380)

Kondisi: baik (bekas), Tahun pembuatan: 2013, berat keseluruhan: 560 kg, polish-hungarian-pump-motor-specs-2023 Cgsdpfx Absydv I Dohen

Kondisi: bekas, berat muatan maksimum: 1.060 kg, berat keseluruhan: 1.400 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 08/2022, panjang ruang muatan: 2.650 mm, lebar ruang muat: 1.560 mm, tinggi ruang muatan: 145 mm,

Kondisi: bekas, berat muatan maksimum: 880 kg, berat keseluruhan: 1.300 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 04/2007, inspeksi berikutnya (TÜV): 09/2026,

Kondisi: sangat baik (bekas), Steady rest (28388) SPH 360 mm Cgedpfomkfd Ssx Abhon Weight: 37 kg Dimensions: see drawing

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of Manufacture: 12/2022 Drive Power (Shredder): 4 kW Drive Power (Compacting Screw): 7.5 kW Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW Total Connected Load: 12.6 kW Power Requirement: 32 A Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material) Block Weight After Compaction: approx. 300 kg/m³ (material dependent) Block Dimensions: 320 x 320 mm, length variable Cgjdpfsu Thkaox Abhon Throughput Capacity: approx. 100 kg/hour (depending on material) Achievable Density: approx. 250 – 300 kg/m³ Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film. Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport Weight (Compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug. Scope of Delivery: 1 piece EPS compactor, ready for connection and operation. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: bekas, Static frequency converter Manufacturer: GARBE LAHMEYER & Co. AG Model: SU3760.2aFZ231 Year of manufacture: 1989 Serial no.: A2K 60229 0001 Rated power: 500 kVA Current type: D Mains voltage: 380 Volt Input frequency: 50 Hz Input current: 760 A Input rated current: 760 A Output voltage: 380 Volt Output frequency: 50 Hz Codpfx Aohutxzebhogn Output current: 760 A Output rated current: 760 A - Control unit GARBE LAHMEYER Type AEB 60 Dimensions cabinet (W x H x D): 2250 x 800/900 x 2550 mm Transport dimensions (W x H x D): 2430 x 1100 x 2700 mm Weight: 1660 kg

Kondisi: sangat baik (bekas), 37 running meters pallet racking Meta Used equipment, very good condition, see pictures Height: 5.5 m Depth: 110 cm Beam length: 3.6 m Load capacity per level: 3,000 kg Frames galvanized Beams red Negotiable price: €3,650 net ex-stock Offer includes: + 11 pcs. pre-assembled frames, depth 110 cm, height 5.5 m + 60 pcs. beams, length 3.6 m, 3,000 kg load capacity per level + 120 pcs. safety clips + 22 pcs. concrete anchors Goods are in stock. Codpfx Aboh R I Uashsgn Transport and installation available on request. Inspection possible at any time by appointment. Further information on request. Over 5,000 running meters of pallet racking from various manufacturers constantly in stock. (Technical data, information, and prices are subject to change and error. Intermediate sale reserved! See our T&Cs, all prices excl. VAT ex-stock) Purchase / Sales We are constantly looking for and offering various items from different fields: - Broom-clean company clearances - Business liquidations - Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Send us a few keywords and we’ll get in touch immediately. To visit our website, please click on our logo!

Kondisi: sangat baik (bekas), SCHELLING FZ 4 Spindle Moulder Heavy Cast Iron Construction Motor Speeds: 2,250 / 3,000 / 4,500 / 6,000 / 9,000 rpm Motor Power: 4.5 kW, 400 V, 50 Hz Spindle Diameter: 30 mm Spindle Height Adjustment: 100 mm Table Size (L x W): 1,100 x 900 mm Extraction Port Diameters: 120 & 80 mm Spindle with Forward and Reverse Rotation Electric Motor Brake Cutter Fence: Swivelling and Precision Adjustable OERTLI Cutter Guard Jaws with Aluminium Inserts INCLUDES: HOLZHER Power Feeder 3 Rollers 4 Feed Speeds Machine Dimensions (L x W x H): 1,100 x 900 x 1,200 mm Machine Weight: approx. 750 kg Note on Used Machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-works, loaded free of charge. Cgsdoxt N Dvopfx Abhen • The machine has been cleaned and function tested. • All machines are sold as viewed, with no warranty or guarantee of any kind. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries that include your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2008, BOTTERO 520 LAM-37 - Tahun 2008 Meja pemotongan untuk kaca laminated Cedpoxqyu Tefx Abhjgn Meja kerja tetap dengan flap Bantalan udara Panjang potong maksimum: 3700 mm Panjang potong minimum: 250 mm Ketebalan: 3-10 mm (monolitik) 2+0,38+2 min. (laminated) 8+4,56+8 maks (laminated) Kecepatan: 100 m/menit Daya terpasang dasar: 15 kW

Kondisi: bekas, Tahun pembuatan: 1994, jam operasional: 21.900 h, Fungsionalitas: berfungsi sepenuhnya, bale-press-avermann-type-avos-1411-37-60-pressing-force-60-t-yea r-1994-good-condition-with-conveyor-belt Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Feed opening: 1,400 x 1,100 mm Throughput (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350–550 kg Tying: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Cedpfxeyhcybo Abhsgn Machine weight: approx. 12,000 kg Note: The press is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of delivery. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for any errors. This offer is subject to prior sale, non-binding, and may be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, prepayment, without warranty or guarantee.

Kondisi: baik (bekas), jarak tempuh: 155.858 km, daya: 105 kW (142,76 hp), pendaftaran pertama: 03/2021, jenis bahan bakar: diesel, ukuran ban: 195/75R16, konfigurasi gandar: 4x2, jarak roda: 3.670 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, suspensi: baja, jumlah tempat duduk: 3, panjang total: 6.250 mm, lebar total: 2.120 mm, tinggi total: 2.500 mm, panjang ruang muatan: 2.900 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 350 mm, Tahun pembuatan: 2021, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kopling trailer, kunci sentral, pendingin udara, pengaturan jendela elektrik, spion elektrik,

Kondisi: bekas, Tahun pembuatan: 2011, BOTTERO 535 AVM-37 – Tahun 2011 Meja Pemotong Kaca Laminasi Low-E Maks. Pemotongan: 3700 mm Cedpfx Abex Hwauohsgn Ketebalan: Float 3-8 mm Laminasi (2+2) (8+8) mm Daya: 23 kW

Kondisi: baik (bekas), jarak tempuh: 84.023 km, daya: 120 kW (163,15 hp), pendaftaran pertama: 10/2018, jenis bahan bakar: diesel, ukuran ban: 205/65R16, konfigurasi gandar: 4x2, jarak roda: 3.670 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, suspensi: baja, jumlah tempat duduk: 4, panjang total: 6.350 mm, lebar total: 2.220 mm, tinggi total: 2.650 mm, panjang ruang muatan: 2.870 mm, lebar ruang muat: 2.170 mm, tinggi ruang muatan: 300 mm, Tahun pembuatan: 2018, Perlengkapan: ABS, kontrol traksi, kopling trailer, kunci sentral, pemanas parkir, pengaturan jendela elektrik, spion elektrik,

Kondisi: bekas, jarak tempuh: 260.000 km, daya: 90 kW (122,37 hp), pendaftaran pertama: 10/1998, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, jumlah tempat duduk: 3, panjang total: 6.000 mm, panjang ruang muatan: 3.300 mm, Perlengkapan: ABS,

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, produsen pengendali: Delem, model controller: DA65, gaya tekuk (maks.): 300 t, lebar kerja: 4.300 mm, panjang langkah: 300 mm, kedalaman tenggorokan: 450 mm, jarak antara penyangga: 3.700 mm, jumlah sumbu: 4, jenis mahkota: dikendalikan CNC, jumlah lengan penopang: 2, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, penghadang cahaya keselamatan, perkakas atas, perkakas bawah, perlindungan jari, sistem pelumasan terpusat, Pressing capacity: 300 tons Bending length: 4,300 mm Frame gap: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Throat depth: 450 mm Approach speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 120 mm/sec Control: Delem DA65 Equipped with: - Y1, Y2, X & R axes CNC-controlled - CNC hydraulic crowning - Various sets of press brake tooling - Safety light curtain Lazer Safe - Operating manual and machine documentation Country of origin: Netherlands Motor power: 30 kW Machine dimensions (LxWxH): 510 x 200 x 330 cm Machine weight: 21,500 kg Csdpfxjydpxvo Abhsgn

Kondisi: bekas, Tahun pembuatan: 2000, kapasitas tangki: 6.779 l, UMUM Desain: tergantung Tahun pembuatan: 2000 Keterangan: Cincin penyangga dari Fe Kecepatan putar: 114 rpm Diameter dalam: 1.800 mm Tinggi total: 4.550 mm Daya: 37 kW Tipe pencampur: pengaduk balok Lokasi: Bremen Pelat identifikasi: Volume: 6.779 liter Material yang kontak produk: V2A 1.4301 (AISI304) Kondisi: bekas Tinggi silinder: 2.200 mm Penggunaan terakhir: Industri kimia TANGKI Tipe dasar: cincin terpotong Cgjdpfx Aboxqbp Sjhjn PERLENGKAPAN Lubang manusia / dome: di bagian atas Saluran keluar: flens DN100 Catatan: terdapat sedikit residu, tutup lubang manusia hilang PENGADUK Produsen pengaduk: Fluid Tegangan: 400/690 V Pengaturan pengaduk: terletak di tengah atas

Kondisi: sangat baik (bekas), jarak tempuh: 20.509 km, pendaftaran pertama: 10/2021, jenis bahan bakar: listrik, konfigurasi gandar: 8x4, bahan bakar: listrik, warna: abu-abu, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, volume ruang muat: 10 m³, Tahun pembuatan: 2021, Perlengkapan: komputer bawaan, kunci sentral, pengaturan jendela elektrik,

Kondisi: bekas, jarak tempuh: 39.900 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 11/2024, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang total: 3.500 mm, lebar total: 2.050 mm, tinggi total: 1.900 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, Tahun pembuatan: 2005, de-to-hu-machine-20240616 Csdpfx Aoycxc Ijbhogn

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, jenis arus masuk: tiga fasa, torsi: 57 Nm, berat keseluruhan: 15.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Initial commissioning: 1999 Control system: Heidenhain TNC430 PA with hand-held unit Working areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 Distance between T-slots 250 mm (The zero-point clamping plates shown as well as additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives for linear axes Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions & Weights Space requirement (machine without control cabinet): approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Cgodpfx Abex Ifdkehon Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 measuring probe Condition of the machine Fully functional, machine is delivered without enclosure and must be enclosed by the buyer in accordance with CE regulations.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 4.486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Cedpfew Au H Rex Abhegn Connected load: 40 kW Pre-fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully functional, very good condition. Dismantled and stored, immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Commissioning: 2014 Control System: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on time: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Axis Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping Table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical Data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, Weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply system with belt filter unit - 50-position chain-type tool magazine - Work area enclosure - Chip conveyor - LTA emulsion mist extraction system Cjdpswywcijfx Abhjgn Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the Machine Fully functional, in very good condition, and still under power for inspection! Images are for illustration purposes and depict a new machine of this type. Original pictures to follow shortly!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, First commissioning: 2000 Control unit: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z axis: up to 1.5 m/s² Cedpfx Aow Rl S Sjbhsgn Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - Illustrated additional clamping table not included in scope of supply Condition of the machine Fully functional, very good condition. Machine remains powered and is available immediately.

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 20 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, jenis arus masuk: tiga fasa, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 9.000 rpm, berat keseluruhan: 15.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Initial commissioning: 1997 Control system: Heidenhain Work areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown as well as other clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Drives for linear axes Cjdpfx Asx Iuguebhegn Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuses: approx. 63 A Dimensions, weights Space requirement machine without control cabinet: approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed by the buyer in accordance with CE regulations. Special features: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, these are NOT standard components of the machine!

Tahun pembuatan: 2021, jam operasional: 9.159 h, Kondisi: bekas, nomor mesin/kendaraan: 374-19, dokumentasi terlampir sebagai PDF Cgsdpfx Asyciu Isbhon