Beli Gabungan Mesin Perencanaan bekas (87.056)

Kondisi: baru, en-GB: - New - Description: - For sawing, milling, surfacing, thickness planing and, optionally, slot mortising - The work tables are made of heavily ribbed cast iron and the base frame is constructed from welded steel, ensuring torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running anodised aluminium sliding table with ball contact system - Tilting saw blade from 90° to 45° - Table extension with degree scale and aluminium cross-cut fence for miter cuts on panels and large workpieces - Planer unit with TERSA quick-change system featuring three planer knives - Helically toothed steel feed roller for constant workpiece feed during thickness planing - Curved cutter guard for profile milling, standard with fine adjustment - Milling unit with two speeds - Independent drive motors for all units - Quality Made in Italy Technical Data: Dimensions and Weights Net weight approx. 245 kg Surfacing Surfacing table width 300 mm Surfacing table length 1200 mm Saw/surfacing fence tilt angle 90/45° Max. planing depth surfacing 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Note on required space: The dimensions take into account maximum travel paths or usable lengths. Thicknessing Thickness table length 450 mm Thickness table width 300 mm Min. working height thicknessing 3 mm Max. working height thicknessing 200 mm Max. planing depth thicknessing 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor duty cycle S6 Drive motor duty cycle 40% Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Milling Spindle Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle length 75 mm Spindle speed(s) 5000 – 7500 rpm Max. Milling Tool Diameter Max. tool diameter 160 mm Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Planer Cutter Block Planer block type TERSA Planer block diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with parallel fence 540 mm Max. cross-cut width left of saw blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multi-function fence for parallel cuts and surfacing - Table extension with cross-cut fence and fence jaw Isdpfx Ajvwf Ensdqebc - Eccentric clamping arm Item no.: 5500030

Kondisi: baru, Tahun pembuatan: 2025, Our C300 5-function combination machines are distinguished by a robust frame constructed from bent and electro-welded steel sheet. The thick cast iron tables are carefully ground and milled, and all materials used are certified to ensure maximum quality. The units are equipped with three self-braking motors, each individually protected, with adjustable power output from 3 hp to 4 hp, depending on specific requirements. The sliding table, made of milled and anodized aluminum with substantial thickness, can vary in length according to the model or individual needs. It runs on steel balls along a steel guideway, with adjustable settings to ensure optimal smoothness. Standard equipment includes a 1600 mm sliding table, with optional tables available up to 2200 mm. The C300 is the ideal choice for the hobbyist, and indispensable for the professional restorer. Built to standards above the average in its class, it maintains a price-to-quality ratio that makes it highly competitive on the market. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Working table mm 300×1500 Cutterhead diameter mm 70 Cutterhead speed rev/min 5700 Number of knives no. 3 Knife dimensions mm 300x25x3 Max table adjustment mm 4 THICKNESSER Working table mm 300×660 Max stock removal mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Min wood passage mm 4 Cutterhead speed rev/min 5700 CIRCULAR SAW Working table mm 220×1000 Blade speed rev/min 4500 Blade diameter mm 250 Blade bore mm 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0°–45° Max width between blade and fence mm 560/700 Scoring blade mm 90 Scoring blade bore mm 22 Scoring speed rev/min 7000 MORTISER Working table mm 500×250 Longitudinal stroke mm 205 Transversal stroke mm 95 Vertical stroke mm 90 Chuck diameter mm 16 Spindle speed rev/min 5700 VERTICAL SPINDLE MOULDER Working table mm 220×1000 Spindle speed rev/min 2000/3100/4400/7000 Standard spindle diameters mm 30/35/50 Spindle length mm 105 Spindle vertical stroke mm 115 Max tool diameter mm 160 Max tenoning depth mm 55 STANDARD EQUIPMENT Subframe, outrigger extension mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 Ibsdpeuzxh Isfx Adqjc OPTIONAL ACCESSORIES Single-phase motor KW/HP 4.0/3.0 Sliding table mm 2200×315 LIST PRICE EXCLUDING VAT

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, Here we offer centering and facing tools for a UMA countersinking and centering machine, model SZM 80/800. Approximately 11 complete sets for double-sided machining are available. Please refer to the images for further details. Please note: Only the tools are being offered, the machine has already been sold! Purchase of complete lot or individual sets upon request. Isdehfww Ijpfx Adqjbc The tool holders are specifically designed for UMA SZM machines.

Kondisi: baru, Description Work table made of heavily ribbed grey cast iron and base frame made of welded steel ensure torsional rigidity and vibration-free operation. Unique in its performance class: sliding table made of anodised aluminium for maximum cutting precision. Cutting line directly at the saw blade. Tilting saw blade from 90° - 45°. Crosscut frame with aluminium length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Weight (net): approx. 190 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Rated operating mode main motor: S6 Duty cycle main motor: 40 % Motor power: 2 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle Moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000 / 7500 rpm Max. Tool Diameter for Spindle Moulder Max. tool diameter: 160 mm Max. tenoning diameter: 200 mm Circular Saw Unit Rip length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of the saw blade: 1200 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. saw blade projection at 90°: 67 mm Max. saw blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Ibjdsvwfqwopfx Adqjc Equipment Anodised aluminium sliding table Crosscut frame with angle-adjustable length stop, flip stop, and degree scale Rip fence Eccentric clamp Table extension Milling fence with wooden jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Kondisi: bekas, combined with: - slotted hole boring device - heavy-duty rolling table used Manufacturer: Rex Storage location: 97447 Gerolzhofen, free loaded, unpackaged Handover in as-inspected condition, without warranty or guarantee Iedpfjvwfyxsx Adqobc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Brandt KDF 530 C edge banding machine with jointing unit, corner rounding, two scraper blades, and Riepe spraying systems. A video of the machine in operation can be sent upon request. The machine is highly automated. Edge thickness approx. 0.4 – 8mm Workpiece height approx. 10 – 50mm Feed speed approx. 11 m/min Noise protection hood Extendable workpiece support Extraction connection 1x200mm, 1x100mm including pictured piping PC16 control system with color screen for simple operation Units: Isdpfjxd Dudox Adqsbc Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Riepe separator agent spraying unit Jointing cutters with Leitz Whispercut diamond cutters, sharpened Glue application unit switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers Cut-off saw with 2 motors, programmable for straight or angled cuts Combination milling unit with motorized lateral adjustment Radius scraper R2, pneumatic adjustment Corner rounding unit R2 with 1 motorized diamond cutter, pneumatic setting for thin or thick edge Pneumatically retractable glue joint scraper with large roller Riepe cleaning agent spraying unit Buffing unit Hood lock CE marking Operating instructions in binder and CD format All indexable inserts for the milling units and scrapers have been replaced or rotated, saws sharpened, jointing cutters sharpened, buffing discs replaced. The machine is therefore ready for immediate use. Only the diamond cutter in the profile milling unit was not replaced, but is still sharp. Minor paint touch-ups. Approx. 3,500 operating hours. The condition of the machine speaks for itself. Occasionally, the PC restarts during operation (usually at high room temperatures), but this has not been an issue for us as work can continue during this time. Machine dimensions approx. 4800 x 1200 x 1800 mm (LxWxH) Weight approx. 1900 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse; see 'Other offers from this seller'.

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Ibodpfxjvvkd To Adqjc

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Flush trimming unit top and bottom RS-100 2 motorized multifunction profile milling units CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with profile milling unit (depending on profile): 35-65 mm Edge thickness, coil: 0.4-3 mm Ijdpfx Aov R Nk Ujdqjbc Edge thickness, strip material: 0.4-22 mm (depending on unit) Min. workpiece length: 140 mm Min. workpiece width (with length 140 mm): 85 mm Min. workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing extraction connection: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half capacity: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without workpiece return conveyor as shown in the pictures Availability: short notice Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) Iedpevvkfdefx Adqebc with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Iodjvvkfwspfx Adqsbc

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Iedpfx Aewmf E Ssdqjbc Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Iodjw Aim Eopfx Adqjbc Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: bekas, Tahun pembuatan: 2022, termasuk 2 bak lem Ketebalan pelapisan tepi rol: 0,4 - 3 mm Ketebalan pelapisan tepi strip: 5 mm Tinggi benda kerja min - maks: 8 - 50 mm Kecepatan makan: 9 m/menit Unit pra-routing Unit lem Unit pemotong Unit pembulat Unit frais sejajar Pisau tarik radius Pisau tarik bidang Unit polisher Perangkat semprotan Iodpew Aig Sofx Adqobc Lokasi penyimpanan: Pelanggan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 674 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 140 mm, jarak lintasan sumbu Y: 70 mm, jarak gerak sumbu Z: 235 mm, Diameter batang (maks.): 42 mm, 1 Iodpfxexlfu Us Adqsbc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 94.936 h, produsen pengendali: Siemens SINUMERIK 80 D, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 600 mm, kecepatan pemakanan sumbu X: 100 m/menit, en-001 Ibodpfx Adexlctzeqsc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 225 mm, model controller: Fanuc 16T, RINCIAN TEKNIS Iodoxlix Dopfx Adqobc Tinggi puncak: 225 mm RINCIAN MESIN Kontrol: Fanuc 16T

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.680 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, DETAIL TEKNIS Area kerja: 3.680 x 1.260 x 150 mm Motor frais: 1 unit, 8,5 kW (11,5 HP) Penukar alat: 1 gearbox otomatis berputar dengan 12 posisi Ibedpfxoxg Izaj Adqjc Unit bor: 18 pengeboran vertikal, 8 horizontal, dan 1 bor gergaji "X" Perangkat lunak: Kompatibel dengan DXF Standar keselamatan: Perlindungan BUMPER, standar CE Berat: 3.000 kg Catatan: Mesin memiliki masalah perangkat lunak dan tidak dilengkapi pompa. Estimasi biaya perbaikan masing-masing sekitar €3.000.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, daya laser: 4.000 W, panjang meja: 1.500 mm, lebar meja: 3.000 mm, Perlengkapan: unit pendingin, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Ibedpfxoxgg Irj Adqsc Mesin telah diservis pada tahun 2022 oleh teknisi ahli Amada. Protokol servis dapat ditemukan di lampiran iklan ini! DETAIL TEKNIS Daya laser: 4 kW Lebar meja: 3.000 mm Panjang meja: 1.500 mm PERLENGKAPAN Pendingin Ridel Unit ekstraksi Donaldson 2 meja tukar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 320 mm, jarak pergerakan sumbu X: 240 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 495 mm, saluran batang: 51 mm, Mesin bubut dengan loader batang LNS & perlengkapan tambahan! Mesin telah diperiksa secara menyeluruh dan diukur secara geometris oleh penjual. Siap langsung digunakan! DETAIL TEKNIS Perjalanan X: 240 mm Perjalanan Y: 100 mm Perjalanan Z: 495 mm Ibedpfxoxg D Ame Adqoc Diameter pemesinan maksimum: 320 mm Diameter lubang batang: 51 mm Kecepatan spindle utama: 5.000 rpm Daya motor spindle utama: 22 kW Kecepatan spindle lawan: 5.000 rpm Daya motor spindle lawan: 22 kW DETAIL MESIN Kontrol: Mazatrol640T PERLENGKAPAN 2 x revolver 12-posisi dengan alat bertenaga Paket opsi CNC pemrograman EIA/ISO Alat pengukur (Tool-eye) Sekat Penangkap bagian otomatis dengan konveyor LNS loader batang pendek Quick Load Servo III Pendingin bertekanan tinggi 10 bar Konveyor serbuk Mayfran ConSep 2000 II

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, saluran batang: 32 mm, model controller: Traub TX8i-S, jumlah slot dalam magazin alat: 12, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Diameter Batang yang Dapat Dimasukkan: 26 / 32 mm Kecepatan Putaran Maks. Spindel Utama: 8.000 rpm Sumbu: X1 / Y1 / Z1, sumbu C terintegrasi di spindel utama Revolver: 1 Posisi alat: 12 Daya penggerak: 6,7 kW (100% duty cycle) / 10,7 kW (40% duty cycle) Torsi: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) RINCIAN MESIN Waktu hidup: 116.721 jam Ibsdpfxoxlfk Ns Adqoc Jam operasi: sekitar 48.000 jam Kontrol: Traub TX8i-S Dimensi & Berat Dimensi (P × L × T): sekitar 4,4 × 1,4 × 1,7 m Berat mesin: sekitar 4.000 - 4.200 kg PERLENGKAPAN Konveyor serbuk: sabuk engsel, tinggi pembuangan sekitar 950 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 1.720 kg, kecepatan operasi: 10.700 mm/dtk, lebar rol: 2.200 mm, DETAIL TEKNIS Material Kaku Tinggi benda kerja: maks. 50,8 mm Berat benda kerja: maks. 34 kg/m² Material Roll Lebar: min. 900 mm – maks. 2.200 mm Berat: maks. 50 kg Diameter: maks. 240 mm Kecepatan cetak maks.: 64,2 m²/jam (dalam mode Ekspres) DETAIL MESIN Iodsxdiyfepfx Adqjbc Dimensi & Berat Dimensi: 3.080 × 2.500 mm Berat: 1.720 kg Catatan: Kepala mesin harus diganti. Penjual dapat memberikan layanan lengkap. Mesin tersedia mulai 02.12.2025!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 26BB2444, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Iedpfjxliwyjx Adqjbc DETAIL MESIN Data Listrik Koneksi: 380 V / 50 Hz Daya terpasang: 10 kVA Pengaman: 25 A Tegangan kontrol (AC): 220 VAC Tegangan kontrol (DC): 24 VDC PERLENGKAPAN Tangki pendingin

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, lebar benda kerja (maks.): 60 mm, Die machine has been serviced and is in excellent condition. It is immediately ready for operation! Iodpfx Adexg Ix Soqobc TECHNICAL DETAILS Edge thickness (glued): max. 20 mm Maximum gluing height: 60 mm Maximum edge band thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electric height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with pre-fabricated container Glue pot: interchangeable/variable Spraying unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner rounding unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Aggregates: synchronized aggregates with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device, 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper PN 10 - HOMAG FA 11 finishing unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15135, panjang penggilingan: 800 mm, lebar penggilingan: 600 mm, tinggi penggerindaan: 500 mm, diameter roda gerinda: 400 mm, jenis kontrol: Kontrol NC, TECHNICAL DETAILS Control: NC Ergomatic Grinding length: 800 mm Grinding width: 600 mm Ibjdexl Sifjpfx Adqec Grinding height: 500 mm Grinding wheel diameter: 400 mm EQUIPMENT Electromagnetic chuck Coolant purification system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 135 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 16 mm, kecepatan spindle sekunder (maksimal): 6.000 rpm, jumlah slot dalam magazin alat: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-chucking: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing main spindle: 1° Rapid Traverses Rapid traverses X, Y: 21 m/min Rapid traverses Z1, Z2: 15 m/min Tooling Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 positions Tool holder: 10 × 10 mm MACHINE DETAILS Drive Power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic Connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor – spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: incremental and absolute Interface: RS232 Spindle synchronization: main spindle and sub spindle FEATURES Work area lighting Part ejection and unloading unit Coolant tank and central lubrication Door interlock Part catcher and workpiece container Ibsdpsxlffyofx Adqjc 5 turning tool holders 10 × 10 mm Coolant device with adjustable jet arms Power clamping system for main and pick-off spindle