Beli Haffner Kf 20 bekas (27)

Kondisi: bekas, Used machine Bedpfx Aasyklfxe Tjld

Kondisi: bekas, Used, good condition, low operating hours Manufacturer: Haffner Model: KF 20 Column-type machine Chain set: 40 x 150 mm Bljdpfx Aajvwgayo Tjd Workpiece support Lubrication device 1 x mechanical workpiece clamping Space requirement (LxWxH): approx. 600 x 800 x 2000 mm Total connected load: 1.7 kW Location: 97447 Gerolzhofen Sale as-is, as inspected - loaded free of charge -

Kondisi: bekas, Tahun pembuatan: 1980, Mesin bekas Kondisi: berbagai kerusakan kecil tanpa rantai Perlengkapan dan data teknis: Angkat Kiri/Kanan: 150 mm, Angkat Atas/Bawah: 150 mm Bjdpjw I U Nhsfx Aa Told Motor: 1,5 kW Dapat digunakan sebagai donor suku cadang Ketersediaan: segera Lokasi: Flörsheim

Kondisi: sangat baik (bekas),

Kondisi: bekas, used Manufacturer: Haffner Model: KF20 Wall-mounted machine Bedpfx Aasvwf T Es Teld Workpiece support Lubrication unit Total connected load: 1.5 kW Location: 97447 Gerolzhofen Sale as seen, in current condition. No repair work included. Prompt collection possible. - loaded free of charge -

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Bor Rantai/Chain Mortiser KF20, dengan beberapa rantai, kondisi sangat baik, 1,7 kW, 380 Volt. Mesin dikenakan pajak diferensial. Blodpfxoxf Hzij Aa Tjd

Kondisi: baik (bekas), Technical data: Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. cross table travel: 90 mm Tilting angle: 5 degrees Machine weight: 72 kg Stand weight: 35 kg Approx. dimensions (HxWxL): 190 x 54 x 60 cm Bljdewm Dlkjpfx Aa Tod

Kondisi: baik (bekas), KF-30 Typ Blodpfedrq Svsx Aa Tjd In gutem Zustand Handbedienung Motor 1,7 kW Kippbar Kettenbreite 18 mm Hergestellt in Dänemark Transportmaße 700х700х1800 mm

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: belum diuji, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, diameter mata gergaji: 500 mm, kecepatan rotasi (maks.): 2.850 rpm, kecepatan rotasi (min.): 2.850 rpm, tekanan udara: 6 batang, tekanan: 6 batang, kecepatan mata gergaji: 2.850 rpm, Kami menawarkan mesin gergaji potong sudut ganda bekas Haffner DGS 187 ini, tahun pembuatan 2000. Tipe: DGS 187 Nomor seri: 0103 Tegangan: 400 V Bjdsyn U Azjpfx Aa Teld Frekuensi: 50 Hz Arus: 20 A Tekanan kerja: 6 bar Konsumsi udara per siklus: 8,0 l Diameter maksimum mata gergaji: 500 mm Kecepatan putar: 2850 /menit Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baik (bekas), de-HAFFNER – DGS 187 – Doppelgehrungssäge mit Schwenkaggregaten für das Schneiden von Holz, Aluminium, PVC und verschiedensten Materialien – CE-Ausführung Bledpfx Asuiwqhea Tsd Technische Daten: Sägeblattdurchmesser: 500 mm (Aufnahmebohrung 30 mm) Anzahl der Motoren: 2 Stück, jeweils 2,2 kW – 2800 U/min Maximale Schnittlänge: 3400 mm Minimale Schnittlänge: 230 mm Sägeblattneigung: 45°–90° Elektronische Positionierung der Schnittlänge des linken Schneidaggregats Hydropneumatischer Sägeblattvorschub Pneumatische Werkstückspannung Bedienpult mit Doppel-Taster Elektronischer Positionsgeber für Aggregatverstellung 2 Absaugstutzen, Durchmesser 120 mm Betriebsdruck: 6 bar Maschinenabmessungen (LxBxH): 4600 x 1300 x 1650 mm Gewicht: 550 kg

Kondisi: baik (bekas), Mesin Frais Slot Kunci Pintu SL 100 - dengan motor frais untuk stulp dan gagang - dengan penjepit pneumatik Bodpsygm Awofx Aa Told - 1,7 kW

Tahun pembuatan: 2019, jam operasional: 500 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 133 0019 020, TA133-Machinery-Description Bjdpfx Aasyhqbgs Tjld

Kondisi: bekas, Door lock mortising machine Used, good condition Manufacturer: Haffner Model: SL 100 Bledpfsvwfmfex Aa Tjd Machine No.: 2269 Column-type machine Chain assembly Door support Workpiece support Spindle lock motor Faceplate motor Lubrication device Extraction port diameter: 80 / 100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without any warranty or guarantee

Kondisi: bekas, Machine cleaned, lubricated, made operational, function-tested, partially overhauled, adjusted, trial run performed Used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 3811 Column machine Chain gear set Door support Blsdpfx Asvxr R Hoa Tjd Handle hole motor Faceplate motor Lubrication device Space required approx. 1200 x 700 x 2000 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without guarantee or warranty

Kondisi: bekas, Used, excellent condition Manufacturer: Haffner Model: SL 100 Machine No.: 5304 Column-type machine Chain set 12-17 50x150 Door support Lever hole cutting motor Faceplate motor Lubrication device Mechanical workpiece clamping Required space approx. 1200 mm x 800 mm x 2000 mm Bjdjvwfd Rjpfx Aa Tsld Weight approx. 300 kg Location: 97447 Gerolzhofen, ex stock, unpacked Handover in as-is condition as inspected, without guarantee or warranty

Kondisi: bekas, Door lock mortising machine Used, good condition Manufacturer: Haffner Model: SL 100 Pillar-type machine Chain assembly: 12 - 17 / 50 x 150 mm Workpiece support Handle hole motor Bodpfovwfv Tsx Aa Tsld Faceplate motor Lubrication unit Mechanical workpiece clamping Required space approx. LxWxH mm: 1500 x 900 x 2010 Location: 97447 Gerolzhofen Handover in as-is condition as inspected - Free loaded -

Kondisi: bekas, used Manufacturer: Haffner Model: SL 100 Upright machine Door support Workpiece support Handle hole motor Faceplate motor Bodpfx Aovxr R Tja Teld Lubrication system Mechanical workpiece clamping Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without any warranty or guarantee

Kondisi: baik (bekas), Double-end profiler, edge processing machine, scribing motor, cutting motor, electric motor, spindle motor, milling motor - Manufacturer: Haffner, Milling Motor Type M 30 - Power: 300 W 17,000 rpm - Voltage: 200 V 300 Hz - Dimensions: 240/70/90 mm Bljdpfx Aaoku Hrrs Ted - Weight: 2.5 kg

Kondisi: bekas, Tahun pembuatan: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Speed: 2800 rpm Bedpstv Rgrefx Aa Tjld Air pressure: 6 bar Machine weight: approx. 700 kg Space requirements: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, enabling simultaneous sawing of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the pivoting mechanism * Safe clamping with dual-pressure system * Dual guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Incl. extraction system (without piping) ALKO Mobil-Jet 100, year of manufacture 2002

Tahun pembuatan: 2008, Kondisi: bekas, de-01 Bedpfx Aex Nm Imoa Tsld

Kondisi: baik (bekas), Router, Vertical Router Machine, Handheld Router Bedpfx Aaeb A N Nme Tsld - Handover: in as-is condition as inspected - Accessories: collet included, but without clamping nut, depth stop - Speed: 12,000 rpm - Rated power: 800 watts - Connection: 230 volts - Dimensions: 320/320/H320 mm - Weight: 12 kg

Kondisi: sangat baik (bekas), Model: DGS 180 Saw angle adjustable in two planes (vertical and horizontal) Bledogh Hl Ejpfx Aa Ted Very good condition.

Kondisi: baik (bekas), Gergaji Mitra Ganda Produsen: Haffner Tipe: DGS 180 Bodpfsx Hgu Iox Aa Tjld Tahun Pembuatan: N.A., sekitar 1990 Panjang potong: 3.400 mm Diameter pisau: 330 mm Daya: 2 x 1,1 kW Kecepatan putar: 2.800 rpm Dapat dimiringkan: 45°, 90° Dapat diputar: -45°, 90°, +45°

Kondisi: bekas, Used machine Equipment and technical data: - Lock case milling unit - Handle hole drill - Faceplate cutter Including accessories Motor: 1.7 kW Bsdpfx Ajwhuk Tja Told 2,800 rpm Location: Mainz Availability: short-term

Kondisi: sangat baik (bekas), Haffner KL-176 crosscut saw Bsdpfjfk I U Rsx Aa Teld