Beli Holzher 1215 bekas (163)

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Iiedpfx Asv Sv Enedqsh Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min extendable workpiece support, motorized adjustable infeed fence Jointing unit 1961, diamond joint cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System automatic gluing height adjustment with sensing nozzle, Pressure regulator for adjusting cartridge pressing pressure, use of PUR adhesives possible, Pressure unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separately for top and bottom) Chip catcher for radius scraper, Flat scraper 1964 for removing glue residues for a clean glue joint with extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 for final cleaning and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm, Edge thickness, strip material: 8 mm, Max edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support distance: 470 mm, Support plate Ø for edge material: 800 mm, End trim knife for coil material up to: 3 mm, Heating time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short-term Location: Solingen

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), I am selling a standing automatic vertical panel saw without a scoring unit, HOLZ-HER Supercut. Cutting area: 5300 x 2200 mm Motor power: 3.0 kW Saw unit tiltable from 0 to 90° Main saw blade diameter: 240 – 250 mm / 2850 rpm Condition: very good Iiodpfx Adspl Svcoqjh Available immediately.

Tahun pembuatan: 2016, Kondisi: baik (bekas), de-edging-specs-2024-06-19-01 • Kantenstärke bei Rollenware: 0,4 – 3 mm • Kantenstärke bei Zuschnitt:     o max. 3 mm mit Aggregat FF701     o max. 8 mm ohne Aggregat FF701     o max. 15 mm möglich durch Werkzeugwechsel am Bündigfräsaggregat • Kantenhöhe: max. 65 mm • Werkstückdicke: 8 – 60 mm Iedpfx Adjwkf Twjqjih • Werkstückbreite: min. 65 mm • Werkstücklänge: min. 160 mm • Vorschubgeschwindigkeit: stufenlos 10 – 18 m/min LUMINA 1380 Ltronic, motorische Druckbalkenverstellung Automatische Schmierung der Transportkette Vorbereitung für RETURN-Anbindung Elektrik für stufenlos verstellbaren Vorschub 400 V / 50 Hz, 2,2 kW Bedienung Edge Control 19 mit 18,5" Touchscreen ECO MODE Energiesparmodus Vorfräsaggregat 1802 mit 2 Fräseinheiten Kantenmagazin MG701 SYNCHRO – automatischer Transport von Rollen- und Streifenmaterial Ltronic LT702 NIR+ Laserkantenaggregat Leimauftragsystem Glu Jet GJ302, motorisch angetrieben, automatische Höhenverstellung der Leimdüse (EVA, PUR) Glu Jet Spülbehälter Wechselwagen GJ302 Wechselwagen LT702 Druckzone 1913 MOT: erste Rolle angetrieben, 2 Andrückrollen Sprühaggregat hinter der Druckzone mit Antistatik-Kühlmittel Kappaggregat 1918 (60 mm) pneumatisch Formfräsaggregat FR701: spielfreie Mechanik und 6 voll digitale NC-Servoachsen für höchste Wiederholgenauigkeit Formfräsaggregat FF701: spielfreie Mechanik und 4 voll digitale NC-Servoachsen für 100% Wiederholgenauigkeit auf Knopfdruck Ziehklingenaggregat 1929 MOT4 mit motorischer Einstellung für Abtastrollen Flächenleimziehklinge FK701 mit Vor- und Nachabtastung zum sauberen Entfernen von Leimresten über die gesamte Werkstücklänge Sprühaggregat 1856 für Ein- und Auslaufbereich Poliereinheit 1940 zur Kantenreinigung und Politur

Kondisi: Pembawa suku cadang rusak (bekas), HOLZ-HER 1230 Automatik. Ijdpouuf Akofx Adqsih Der Maschinensteuerung fehlt das Bedienfeld, das für den automatischen Formatbetrieb erforderlich ist. Mit Hilfe eines Elektrikers kann die Maschine auf den normalen Automatikbetrieb umgerüstet werden. Bis dahin ist ein Betrieb weder im manuellen noch im automatischen Modus möglich. Industriemaschine in gutem Zustand, wird jedoch aufgrund des Fehlens als unvollständig angeboten.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 25.996 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 55/1-105 15501954 BAZ11V3, jarak pergerakan sumbu X: 6.566 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 445 mm, kecepatan spindel (maks.): 6.500 rpm, jumlah slot dalam magazin alat: 24, No reserve price – guaranteed sale to the highest bidder! Machine already dismantled TECHNICAL DETAILS Workpiece dimensions for cutting (excluding cutter radius): 6,225 x 1,595 mm Travel X: 6,566 mm Travel Y: 1,800 mm Travel Z: 445 mm Clearance height, standard consoles – 1st stroke: 498 mm Clearance height, standard consoles – 2nd stroke: 598 mm Clearance height, Vario table – 1st stroke: 445 mm Clearance height, Vario table – 2nd stroke: 545 mm Speed Programmable vector speed: 142.0 m/min Speed X: 100 m/min Speed Y: 100 m/min Speed Z: 25 m/min Drilling unit Type: Drilling unit 7976, 24 spindles Drive power: 3.0 kW Vertical spindles Number: 18, individually selectable Configuration: L-shape (10 on X-axis, 8 on Y-axis) Spindle pitch: 32 mm Isdewvi Icepfx Adqjih Max. drilling diameter: 35 mm Total drill length: 70 mm (from screw-in end, depending on panel thickness) Spindle stroke: 70 mm Rotation direction: alternating right-/left-hand Speed range (stepless): 1,000 – 6,500 rpm Connection: M10 thread – press fit 11 mm Horizontal spindles Number: 6 on X-axis: 2 double drilling spindles Spindle pitch (X-axis): 32 mm on Y-axis: 1 double drilling spindle Connection: M10 thread – press fit 11 mm Total drill length: 70 mm (from screw-in end) Consoles & suction cups (VarioTable) Number of consoles (automatic positioning): 6 Workpiece consoles (automatic, X-direction): 5, in fields A + D Suction cup holders per console (automatic, Y-direction): 3 Vacuum suction cups per holder: 1, 80 x 80 mm with plunger valve Suction cover per holder: 1 Loading aids: 4 Rear stop pin per console: 1 Note: Only 5 out of 10 consoles are working correctly Saw unit / interchangeable unit Central unit: Central gear 7955, for saws (mainly solid wood) Tool holder: HSK-F 63 Max. output speed: 6,750 rpm Number of spindles: 1 Max. saw blade diameter: 220 mm Saw blade bore: 30 mm Drive pins: 2 x Ø 6 mm Clamping cover: self-locking Lubrication: oil sump lubrication MACHINE DETAILS Operating hours: 25,996 h Number of power-on cycles: 965 x EQUIPMENT - Drilling unit with 24 spindles (vertical and horizontal) - VarioTable with automatically positionable consoles and suction cups - 4 loading aids - Central saw unit with HSK-F 63 interface - Saw blade holder for up to Ø 220 mm with oil sump lubrication - new pump installed - only 5 out of 10 consoles fully functional – long workpieces can still be securely supported - No tools included in the scope of delivery

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, HOLZ-HER SPRINT 1329 okleiniarka Główne zalety i cechy: ● Konstrukcja: Solidna budowa, stabilna forma oraz doskonałe tłumienie drgań. ● Panel sterowania: Intuicyjny pulpit z monitorem dotykowym 15 cali, umożliwiający łatwe wprowadzanie, zapisywanie i wyświetlanie danych obróbczych oraz sterowanie maszyną. ● Automatyzacja: Automatyczny zapis informacji o używanych programach, liczbie obrabianych sztuk oraz czasie pracy maszyny. ● Cicha praca i bezpieczeństwo: Osłony dźwiękochłonne redukują hałas oraz zwiększają bezpieczeństwo stanowiska pracy. ● Programowanie: Programowane sterowanie HOLZ-HER zapewnia pełną funkcjonalność okleiniarki przy możliwości uruchamiania kompletnych programów obróbczych. ● Regulacja mechaniczna: Zmotoryzowana regulacja wysokości obrabianych elementów. Iisdpfxewn Nuas Adqsh ● Transport: Rolki podające na wejściu i wyjściu maszyny. Łańcuch transportowy maszyny ze zautomatyzowanym smarowaniem. Szczegółowa specyfikacja i wyposażenie (zespoły robocze): 1. Zespół frezujący wstępny 1802 (2 x 2 kW, 12000 obr/min): ○ Jednostka synchroniczna i przeciwbieżna z dwoma diamentowymi frezami K/F 70-64 30. ○ Zmotoryzowana regulacja grubości frezowania (maks. 3 mm). 2. Zespół podawania obrzeża 1901 Synchro: ○ Pozwala na precyzyjną regulację naddatku obrzeża, co znacznie wpływa na oszczędność materiału. ○ Podawanie obrzeża z jednej płyty o średnicy 820 mm. Szerokość załadunku obrzeży w postaci taśmy: 40 mm. 3. System klejenia Glue Jet 2.3 (opatentowany system): ○ Brak wałka klejowego – klej nanoszony jest za pomocą dyszy. ○ Przeznaczony do stosowania klejów EVA (granulat, wkłady) oraz PUR. ○ Pełna regulacja rozpoczęcia i zakończenia nanoszenia kleju, a także wysokości nanoszenia w zależności od grubości obrabianego elementu. ○ Technologia hybrydowa, czas nagrzewania 3-4 minuty. 4. Strefa docisku 1913 MOT (zmotoryzowana regulacja): ○ Trzy rolki dociskowe, z czego pierwsza napędzana i wykonana w technologii SYNCHRO. ○ Pozostałe dwie rolki ustawione skośnie dla lepszego docisku obrzeża. 5. Zespół obcinający 1928 (2 x 0,45 kW, 12000 obr/min): ○ Pneumatyczna regulacja. ○ Precyzyjne obcinanie obrzeży o grubości do 60 mm tarczami HM. ○ Zakres regulacji obu jednostek 0-10°. Dwie tarcze tnące Ø110. 6. Zespół frezujący uniwersalny 1826 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Przeznaczony do profilowania obrzeży w zakresie 15° do 90° lub prosto. ○ Narzędzia diamentowe z technologią AIR STREAM. ○ Promień narzędzia R=2 mm. 7. Zespół zaokrąglający rogi 1833 MOT4 (2 x 0,65 kW, 12000 obr/min): ○ Zmotoryzowana regulacja. ○ Zaokrąglanie kątów w locie narzędziami HM do maks. R=3 mm. ○ Możliwość powtarzania promieniowania na obrzeżach. ○ Diamentowe narzędzia. ○ Promień narzędzia R=2 mm. ○ Grubość elementów obrabianych 10-60 mm. 8. Zespół cyklinujący 1929 MOT4 (cyklina profilowa): ○ Zmotoryzowana regulacja. ○ Do cyklinowania PVC oraz ABS. ○ Maksymalny promień do R=3 mm. ○ Dwie wymienne noże, dysze wydmuchowe oraz odciąg wiórów. 9. Zespół polerujący 1964 (2 x 0,12 kW, 1400 obr/min): ○ Dwie jednostki czyszczące z obrotowymi tarczami filcowymi. ○ Obie jednostki regulowane w zakresie 0-5° dla podniesienia efektu czyszczenia. 10. Netsystem 1856: ○ Zespół 4 dysz natryskowych (dwie z przodu i dwie z tyłu maszyny). ○ Płyn o właściwościach antyadhezyjnych i czyszczących. ○ Zapewnia niewidoczne łączenie i wysokojakościowe wykończenie.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 18 m/menit, ketebalan tepi (maks.): 8 mm, tinggi produk (maks.): 45 mm, panjang produk (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color display (16:9) Control Panel: Swiveling Program Memory: Available Pressure Bridge Adjustment: Motorized Feed: Via transport chain Feed Speed: 8 - 18 m/min Workpiece Support: Extendable Infeed Fence: Motorized adjustment Edge Thickness (Coiled Material): 3 mm Edge Thickness (Strip Material): 8 mm Max. Edge Thickness for Corner Rounding: 3 mm Workpiece Thickness: 45 mm Workpiece Thickness for Corner Rounding: 45 mm Minimum Workpiece Length: 180 mm Distance Workpiece Support: 470 mm Edge Material Support Plate Ø: 800 mm Milling and Processing Units Jointing Unit: 1961 Cutter Type: Diamond jointing cutter, climb and counter rotation Workpiece Height Adjustment: Automatic Edge Feed & Glue Application Edge Feed: 1903 Pre-Cutting: Up to 3 x 45 mm (material dependent) Glue Application System: 1905 Multi-System Glue Height Adjustment: Automatic with sensor nozzle Pressure Regulator: For cartridge pressure adjustment PUR Glue Usage: Possible Pressure Section & End Trimming Unit Pressure Section: 1913 MOT Drive: 1st roller driven End Trimming Unit: 1918 with pneumatic adjustment End Saw: Pneumatically swiveling Milling & Edge Processing Multifunctional Unit: 1824 MOT 4 Cutter: Multifunctional cutter for 1, 2, 3 mm radii Corner Rounding Unit: 1832 Corner Rounding Capability: Up to 3 mm edge thickness Radius Scraper Blade: 1929 MOT 2 Sensor Roller Adjustment: Motorized (horizontal) Pneumatic Adjustment: Separate for top and bottom Cleaning & Polishing Chip Collection Box: For radius scraper blade Flat Scraper Blade: 1964 (for removal of glue residue, for a clean glue joint) Extraction Hoods: Available Spraying Device: 1856 for infeed and outfeed zones Buffing Unit: 1940 (for final cleaning and edge polishing) Performance Data & Extraction End Trimming Knife for Coiled Material up to: 3 mm Heating Time: 3.5 min Jointing Cutter Power: 2 x 2 kW End Saw Power: 2 x 0.22 kW Milling Unit Power: 2 x 0.35 kW Corner Rounding Power: 0.22 kW Extraction Port Jointing Unit: 120 mm Extraction Port Milling Unit: 70 mm Iedpfxsvzyble Adqoih Extraction Port Scraper Unit: 70 mm MACHINE DETAILS Total Length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter (climb and counter rotation) - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (material dependent) - Glue application system with automatic glue height adjustment and sensor nozzle - Pressure regulator for cartridge pressing pressure - PUR glue applicable - Pressure section with driven first roller - End trimming unit with pneumatic adjustment - Pneumatically swiveling end saw - Multifunctional unit for 1, 2, 3 mm radii - Corner rounding unit up to 3 mm edge thickness - Radius scraper blade with motorized sensor roller adjustment - Chip collection box for radius scraper blade - Flat scraper blade for clean glue joint - Extraction hoods - Spraying device for infeed and outfeed - Buffing unit for final cleaning and edge polishing

Kondisi: baik (bekas), Tahun pembuatan: 2000, I am selling a 3-axis CNC machining center, HOLZ-HER ECO-MASTER 7113, with traversing table, year of manufacture 2000. Configuration: - 3-axis main spindle, 7.5 kW - 4-position tool magazine HSK63 mounted on the head - 1x grooving saw in X-direction Isdpfstt Sy Hjx Adqjih - Drilling head with 9+2 drilling spindles - Usable working area: 2300 x 1000 x 130 mm - 2 working surfaces, 4 clamping zones - Automatic central lubrication system - Holzher software with operating manual - RIETSCHLE pump, 2.2 kW - Additional vacuum system for template work or supplementary clamping devices Good condition. Immediately available from stock.

Kondisi: sangat baik (bekas), Distance between the drills: 32 mm 2 x 1.5 kW motors Pneumatic pressure Iisdpfxetrdlto Adqeh Distance between the units: 72 cm 2 lower units 1 unit with 26 drills

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, de Ijdpfx Adjrz Irroqoih

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 1.020 h, Fungsionalitas: berfungsi sepenuhnya, offer-Holzher-Nextec-7707-EN Iedpfowtiq Ssx Adqeih

Kondisi: bekas, Tahun pembuatan: 1995, Edgeband thickness 0.3 - 8 mm, Maximum edgeband height 51 mm, Minimum edgeband length 200 mm, Workpiece thickness 6 - 45 mm, Minimum workpiece width 60 mm, Minimum workpiece length 180 mm, Feed speed approx. 11 m/min, Cartridge glue application system, End trimming station with 2 saw blades, Combination flush trimming unit, Iedpfx Ajn Hqkrodqeih Radius scraper, Buffing station, !!! Machine in unrestored/as-is condition !!! Sold as inspected, Excluding transport and commissioning. Located in Seevetal,

Kondisi: bekas, Tahun pembuatan: 1983, used Make: Holz-Her Model: 1415 Year of manufacture: 1983 Machine no.: 119 GS-certified Iiedpevwfq Dsfx Adqoh Glue system: Granupress cartridge Edge thickness: 0.4–25 mm Workpiece height: min. 6 mm, max. 60 mm Workpiece width: min. 60 mm Workpiece length: min. 140 mm Feed speed: 8–11–15 m/min Thick edging up to 25 mm Edging from roll End trimming unit: 2 x 0.55 kW 2 x Flush trimming units: 2 x 1.1 kW 2 chamfer milling units 2 x Buffing units: 0.25 kW 1 x Sanding unit: 1.75 kW Grooving unit: 2.2 kW automatic edge magazine Extraction connection: 200 mm Space requirement: approx. 6800 mm x 900/1400 mm x 1400 mm Weight: approx. 3,500 kg Total connected load: approx. 13.5 kW Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in as-inspected condition, without guarantee or warranty

Kondisi: baik (bekas), Tahun pembuatan: 2009, I am selling a 3-axis CNC machining center HOLZ-HER PRO-MASTER 7023 with pod and rail table, year of manufacture 2009. Configuration: - 3-axis main spindle, 6 kW - Tool magazine with 4 HSK63 positions on the head - 1x grooving saw, X-direction - Drilling head with 16+4+2 drilling spindles - Usable working area: 3200 x 1060 x 378 mm - 2 working zones, 4 clamping areas - Automatic central lubrication system - HOLZ-HER software with operating manual - BECKER pump, 250 m³/h - Additional vacuum for template work or extra clamping devices Good condition. Immediately available from stock. Iisdpfx Adjtt S D Roqjh

Kondisi: sangat baik (bekas), 3 kW motor Ijdpjtrfarofx Adqjih Working height: 215 cm Working length: 310 cm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 280/1-501 15506069, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by 26.05.2025. Standard equipment as per manufacturer – no warranty TECHNICAL DETAILS Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Workpiece thickness: 8 – 45 mm Edge width: 0.4 – 3 mm Feed speed: 10 m/min Feed system: Single feeder for coiled edging strips or cut-to-length strips Pre-milling unit Milling feed: 45 mm Glue application Glue system: Glu Jet S Type of glue: EVA and PUR adhesive (single-cartridge system with glue stick) Pressure system Number of pressure rollers: 3 units End trimming End trimming motors: Single-motor system 45 mm Iijdpfswkp S Djx Adqjh Cut-off unit Cut-off unit: Multifunctional aggregate Corner rounding Corner rounding: 60 mm Scraper Scraper: Mechanical, including chip extraction Flat scraper Flat scraper: Mechanical, with chip collector MACHINE DETAILS Overall length: 4,930 mm Width × height: 1,600 × 1,774 mm Weight: 1,400 kg

Kondisi: baik (bekas), For sale is a wide belt sander from the brand HolzHer. The machine is in perfect working condition and can be inspected on site at any time. For machine specifications, please refer to image 5. The rear brush is unfortunately somewhat worn. Iiedsvwm Eispfx Adqeh A full pallet of sanding belts is included in the offer. The price is gross, i.e., €2,500 net. An invoice will be issued for the machine. Shipping of the machine is available for an additional charge, of course. If you have any questions or are interested, please feel free to contact us! Your JG Holztechnik Team

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.969 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 920 mm, jarak gerak sumbu Z: 70 mm, gerak cepat sumbu X: 68 m/menit, pergeseran cepat sumbu Y: 68 m/menit, pergerakan cepat sumbu Z: 68 m/menit, kecepatan spindel (maks.): 24.000 rpm, jumlah spindel: 15, TECHNICAL DETAILS Machining dimensions Max. workpiece size: 3,200 mm x 920 mm x 70 mm (without additional support) Min. workpiece size: 200 mm x 70 mm x 8 mm Milling and drilling capacities Trimming (minus cutter radius): 1,500 mm Complete machining depth: 1,300 mm Number of spindles (9 vertical / 6 horizontal): 15 spindles, incl. sawing unit for slotting in X-direction Milling spindle Power: 7.5 kW Tool holder: HSK Speed range: 1,000 – 24,000 rpm Linear tool changer: 6-position X-Y changer: Yes Tool dimensions Tool diameter: Ø 110 mm Tool length: 80 mm Feed and speed Infeed fence: Height-adjustable for 4-sided trimming and profiling Feed speed: 68 m/min Iiodpfou R N Rlsx Adqoh Safety standards CE conformity: Yes Material handling Heavy-duty roller conveyors: Yes Stops: 2 stops Workpiece clamping: Fully automatic positioning vacuum cups, ECOMODE MACHINE DETAILS Software: CAMPUS / NC-Hops, incl. aCADemy CAD/CAM module machine license Dimensions (L x W x H): 3,675 x 2,470 x 1,660 mm Weight: 2,200 kg Extraction connections: 2 x Ø 120 mm + 1 x Ø 140 mm

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 174/0-404, Holz Her CNC 32 axes + axe C, 2 tables de travail de 2x3 mètres, laser, livrée avec un ensemble complet d’outillage pour la fabrication de portes intérieures classiques et contemporaines, ainsi que de moulures pour portes d’entrée classiques. Iijdpfsu Thhlox Adqsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Edgebanding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm max. 15 mm possible with tool change on milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min. Control system: PPC 221 – with 8.4" VGA color display Motorized adjustment of infeed fence, adjustable via control system Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feeding system 1901 SYNCHRO Automatic transport of edging material in rolls and strips Glue application system Glu Jet GJ301 automatic Automatic adjustment of glue height (sensor nozzle) Glu Jet hybrid technology - processing of EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Container for glue granulate 5 kg for GJ301 PRESSURE SECTION - Pressure unit 1914-1 MOT END-TRIMMING UNIT - End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swiveling function 0/10° for coils and strips: MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) Iiodpoxggmbsfx Adqjh with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile trimming unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12,000 rpm) Trimming of top and bottom longitudinal edges, copying of top and bottom front longitudinal edge as well as rear longitudinal edge, corner rounding, postforming of corners with 4 positioning motors: SCRAPING UNIT 1927 MOT5 Carbide reversible knives for scraper 1929 R = 2.0 mm (2 knives required) SURFACE SCRAPING UNIT 1964 For removing excess glue for a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Kondisi: bekas, Tahun pembuatan: 2007, Area pemotongan: 3900 x 3100 mm Daya motor: 11 kW Diameter mata gergaji: 350 mm Putaran: 4070 rpm Kecepatan pengumpanan: 0-70 m/menit Bukaan rahang penjepit: 72 mm Maks. tonjolan mata gergaji: 77 mm dengan scorer Lokasi penyimpanan: Pemasok Ijdpexfbwrsfx Adqsih

Kondisi: bekas, nomor mesin/kendaraan: 008139, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 920 mm Daya spindle utama: 10,3 kW Jumlah sumbu yang dikontrol: 3 sumbu Isdpfxsw R R Ufe Adqjih Jumlah spindle bor: 15 Jumlah tempat alat: 4

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 278 h, Max. workpiece size for edge milling X = 3620 mm; Maximum travel paths: X = 3865 mm Minimum room height 3.20 m Processing in Y and Z Y = 1600 mm; max. panel width 2000 mm Maximum workpiece height 300 mm Measured from upper edge of vacuum cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software 1 x license incl. CabinetControl Base and material removal simulation 1 pc. software license secured via license dongle for the machine CabinetControl Base Software for furniture planning and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Iijdpfx Asxfaf Uodqeh Siemens industrial PC control Handheld device for remote machine operation MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24000 rpm, steplessly adjustable Cardanic; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Tool weight max. 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. sawing unit 18 vertical spindles individually selectable L-shaped arrangement, 11+2 in X-, 6 in Y-direction, 32 mm pitch n (max.) 1000 - 5710 rpm, steplessly adjustable 6 horizontal spindles 2 double drilling units in X-direction 1 double drilling unit in Y-direction includes sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 7330 rpm, steplessly adjustable MACHINE TABLE Machine table, 6 consoles, pneumatically clamped, movable in X-direction Display and definition of consoles and suction cups in the program 2 lateral stops at field A and D, 2 large push buttons for clamping and releasing workpieces, 2 measuring tape displays for positioning the consoles in X in relation to stop field A/D, measuring tape displays for suction cups at each console in Y, relative to rear stop STOPS 2 additional processing fields front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one per console and one additional lateral stop in X-direction LOADING AIDS 4 pneumatically raised and lowered loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travelling automatically in X-direction Travelling tool changer 7886, single saw blade magazine Specially for large saw blade diameters up to 350 mm Pick-up system mounted on the gantry, pneumatic Max. Ø tool: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED light for the work area. SAFETY OPTIONS Safety enclosure according to CE-standards Protective fence on the sides and rear EQUIPMENT VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension - ideal for 4-field processing and for large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements each per field A/D Each module can control max. 5 frame clamping elements simultaneously. Simultaneous opening/closing of the connected frame clamping elements, incl. foot pedal for actuation; max. 2 pcs. each for fields A and D can be ordered. OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum cups

Kondisi: bekas, Tahun pembuatan: 2002, Dimensi pemesinan (diameter alat 25mm): X=3015 mm Y=1483 mm Z=325 mm Maks. pergerakan sumbu: X=3268 mm Y=1483 mm Z=325 mm Kecepatan pemrograman maks.: X/Y = 75 m/menit / Z = 30 m/menit Dudukan alat HSK 63F Unit bor 7964, 14 spindle bor vertikal dengan rasio 32 mm (10 di x / 4 di y) Unit gergaji 7946 3,6 kW, dapat diputar pneumatik 90° Unit frais 7933 9 kW kayu dengan sumbu C Magasin alat (piringan, 6 slot) Panel kontrol manual Perangkat laser (untuk posisi cangkir vakum) Panel kontrol PC dengan monitor 17" Sistem operasi Windows 2000 Perangkat lunak: TwinCAM32 – versi kantor Pompa vakum 100 m³/jam, tipe kering, karpet alas keselamatan selektif (pembagian 3 bidang) Iiodpfx Aovvi Nbedqsh Lokasi penyimpanan: Nattheim