Beli Holzkraft Asa 2053 bekas (164)

Kondisi: baru, Tahun pembuatan: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Bjdpehpmawefx Abvedh Nominal air flow rate: 1,760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1,340 mm Machine width: 900 mm Machine height: 2,170 mm Weight: 178 kg

Kondisi: baru, - NEW - Description Cutting level directly at the saw blade Heavy-duty grey cast iron steel construction Precision-guided aluminium sliding table, standard anodized finish Large support table guided on telescopic arm and adjustable lengthwise Extendable aluminium telescopic fence with professional flip stops, angle adjustable Parallel fence with quick clamping and fine adjustment Large worktable made from milled grey cast iron remains permanently flat Standard table extension and table widening enable easy handling of large workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with a scoring unit installed Bdjdpfxjvyuqfs Abvoh Equipment details: Double-trunnion saw unit - Large size, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height even with scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to a max. of 2550 mm - Angle adjustable - With professional flip stops Aluminium sliding table - Proven ball contact system - Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on guideway wear Parallel fence with round bar guide - With fine adjustment and quick clamping - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down feature for cutting large workpieces Technical data: Dimensions and weights Weight (net) approx. 380 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated operating mode S6 Current type AC Duty cycle drive motor 40 % Mains frequency 50 Hz Sliding table and worktable Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscut width left of saw blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilting 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323

Kondisi: baru, - NEW - Manufacturer: Holzkraft Bedpfsvwf Tlox Abvedh Model: HBS 633 S SET Description: - Heavy-duty profile design with high intrinsic weight for maximum smooth operation - Quiet and precise running thanks to a torsion-resistant machine housing - Large, one-piece grey cast iron saw table, tiltable from 0° to +45°, with ground and polished surface - Large cast iron parallel fence - Quick and precise cutting height adjustment via handwheel and rack with millimeter scale - Supplied as standard with mitre gauge - Precision 3-roller blade guide with guide rollers above and below, featuring fine adjustment - Eccentric quick-release lever; basic blade tension setting remains unchanged, with integrated blade tension indicator - Saw table mounted on a double pivot arm, allowing easy and quick fixing of the set angle with quick lock - Eccentric quick-release lever - Basic tension setting remains unchanged - With integrated saw blade tension indicator - The solid grey cast iron saw table is easily and conveniently adjusted via a handwheel rack and pinion guide - Stepless table tilting from 0° to 45° - Easy and quick fixing of the set tilt angle via quick lock Technical Data: Work table dimensions: 830 x 600 mm Cutting speed: 1615 m/min Flywheel diameter: 630 mm Max. cutting height: 400 mm Max. cutting width with fence: 570 mm Max. cutting width without fence: 610 mm Bandsaw blade length: 4600 mm Precision blade guides above / below Table tilt: 0 to +45 ° Motor power: 400 V/50 Hz/P2 3.75 kW Weight: 380 kg Dimensions: 1190 x 750 x 2060 mm Extraction port diameter: 2 x 100 mm Item no.: 5156303SET Location: 97447 Gerolzhofen - free loaded -

Kondisi: baru, - NEW - - Cutting plane directly at the saw blade - Large-dimensioned cast iron saw unit, double-mounted on the cast iron table – guarantee for stability, precision, smooth operation and long service life - Precision-guided aluminum sliding table, anodized as standard - 10-year HOLZKRAFT warranty on the wear of the sliding table guide rails - Parallel fence with round bar guide and fine adjustment as standard - Large work table made of milled cast iron Bedpfx Asvyup Uebvsdh - Smooth operation and precise cuts - Standard table extension and table enlargement allow easy handling of larger workpieces - Extendable aluminum telescopic fence with angle adjustment and two professional folding stops - Made in Italy TECHNICAL DATA Dimensions and weights Net weight approx. 295 kg Extraction connection Extraction port diameter 120 mm Extraction port diameter (saw blade guard) 60 mm Installation information Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Required space length 3860 mm Required space width/depth 2750 mm Explanation of required space Dimensions include maximum travel paths or usable lengths Working area length 1000 mm Working area width/depth 2000 mm Explanation of working area Please add the indicated working area dimensions to the required space to determine the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Drive motor duty type S 6 Drive motor duty cycle 40 % Sliding table and table Sliding table length 1600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 1020 mm Table width 325 mm Table height 860 mm Circular saw unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 1660 mm Ripping length 1600 mm Saw blade tilt 90 - 45° Max. cutting height at 90°: 100 mm Max. cutting height at 45°: 79 mm Saw blade diameter 315 mm Saw blade speed 4000 rpm EQUIPMENT Anodized aluminum sliding table Handle for sliding table Ripping frame Saw parallel fence with round bar guide Two professional folding stops Ripping shoe Eccentric clamp Table widening Table extension Saw blade guard hood

Kondisi: baru, - NEW - Description With TERSA cutterblock for change of planer knives in seconds The TERSA planer knife system enables particularly quiet operation Helically toothed steel infeed roller for constant and uniform wood feed The particularly long jointer tables, made from a single piece, allow for easy planing of workpieces Large planer fence can remain in position when opening the jointer tables Jointer tables open to the rear The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction. Work tables made from stress-relieved, annealed cast iron: durable, resistant, and permanently flat Table lips for quiet operation Equipment Details: TERSA planer cutterblock No more adjusting or screwing Knife change in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for jointing and thicknessing face in the same direction. Hose connection is from one side only. No hose needed to reach around the machine. Drive Sturdy chain drive design Drive wheels made of steel Massive cast iron bearing block Bjdpsvwga Hofx Abvsdh Planing unit Heavy-duty anti-kickback fingers prevent workpiece kickback TERSA cutterblock with three knives ensures the best possible planing pattern Material feed Helically toothed steel infeed rollers provide constant and uniform material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Technical Data: Dimensions and Weights Length (Product): approx. 2015 mm Weight (Net): approx. 330 kg Width/Depth (Product): approx. 990 mm Drive Power Drive motor power: 5 kW Jointer Total table length: 1800 mm Max. cutting depth (jointer): 4 mm Working height: 900 mm Extraction Connection Extraction port diameter (thicknesser): 2 x 120 mm Installation Information Space requirement, length: 2015 mm Machine body width/depth: 596 mm Space requirement, width/depth: 1460 mm Working area, length: 1000 mm Space Requirement Explanation Dimensions account for maximum travel or usable lengths. Working area, width/depth: 3500 mm Machine body length: 659 mm Working Area Explanation Add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. Thicknesser Thickness table length: 605 mm Max. workpiece height (thicknesser): 230 mm Thickness table width: 420 mm Max. cutting depth (thicknesser): 4 mm Min. workpiece height (thicknesser): 3 mm Electrical Data Connection voltage: 400 V Current type: AC Phase(s): 3 Ph Network frequency: 50 Hz Planer Cutterblock Cutterblock type: TERSA Cutterblock speed: 5200 rpm Cutterblock diameter: 72 mm Max. planing width: 410 mm Number of knives: 3 pcs Feed Feed speed: 7 m/min Scope of Delivery TERSA cutterblock Anodised aluminium planer fence No. 550 3414

Kondisi: baru, Tahun pembuatan: 2022, Bandwidth: 150 mm Bjdpfx Asgr Ufhebvodh Belt length: 3,000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1,900 mm Machine width: 810 mm Weight: 290 kg

Kondisi: baru, en-GB - NEW - - Equipped with TERSA cutterhead for blade changes in seconds - TERSA planing knife system ensures exceptionally quiet operation - Helically serrated steel infeed roller for constant and uniform wood feed - Extra-long one-piece surfacing tables for easy planing of workpieces - Large parallel fence remains in position when opening the surfacing tables - Surfacing tables open to the rear - High machine weight ensures maximum precision and smooth operation - Powerful industrial motor - Robust steel/grey cast iron construction - Work tables made of grey cast iron, stress-relieved and annealed for lasting flatness and durability - Table lips for quiet operation Features TERSA cutterhead - No more adjusting or screwing - Blade changes in seconds - Self-locking mechanism - Especially quiet operation - Perfect planing results Extraction hose connection - Extraction ports for both surfacer and thicknesser face the same direction - Hose connection from one side only - No hose required around the back of the machine Drive - Sturdy chain drive - Drive wheels made of steel - Heavy-duty grey cast iron bearing block Cutterblock - Heavy-duty anti-kickback devices to prevent material kickback - TERSA cutterblock with three knives for optimal surface finish Material feed - Helically serrated steel infeed rollers for constant and uniform material feed without marking - Multiple teeth engage simultaneously for powerful feed - Maintenance-free compared to rubber feed rollers Technical data: Length: approx. 1725 mm Width/Depth: approx. 880 mm Weight: approx. 270 kg Maximum planing depth (surfacer): 4 mm Extraction port diameter (thicknesser): 2 x 120 mm Minimum thicknessing height: 3 mm Maximum thicknessing height: 230 mm Maximum planing depth (thicknesser): 4 mm Drive motor power: 4 kW Connection voltage: 400 V Frequency: 50 Hz Cutterblock type: TERSA Number of knives: 3 Bedpfxovwgaas Abvedh Speed: 5200 rpm Maximum planing width: 300 mm Feed speed: 7 m/min Art.-No. 5503031 Stock location: 97447 Gerolzhofen - free loaded -

Tahun pembuatan: 2023, Kondisi: baru, Rollers: 3 Roller width: 60 mm Roller diameter: 120 mm Bdjdpfelikf Sjx Abvjh Spring travel: 20 mm Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min Stand reach: 1050 mm Motor power: 0.75 kW

Kondisi: baru, NEW - Manufacturer: Holzkraft Model: HBS 533 SET - Exceptionally quiet and precise operation thanks to a torsion-resistant machine housing and a robust steel sheet base - Large one-piece grey cast iron saw table with a precisely ground and polished surface - Convenient laser unit for marking the cutting line - Quick-release blade tensioning via eccentric lever at the rear of the machine - Standard delivery with two cutting speeds - Precise 3-roller blade guides above and below Bdjdpfxevwgamo Abveh - Fast adjustment of cutting height via rotary knob and rack and pinion with millimeter scale - Smooth-running aluminium rip fence with eccentric quick clamp and magnifier - Mitre fence included as standard, adjustable ±60° - Safety switch for automatic shutoff when door is opened Technical Data: Table dimensions: 680 x 530 mm Cutting speeds: 850/430 m/min Flywheel diameter: 530 mm Max. cutting height: 270 mm Max. cutting width with fence: 474 mm Max. cutting width without fence: 514 mm Blade length: 3865 mm Precision guide: 3 rollers above/below Table tilt: -10 to +45° Motor output: 400 V / 50 Hz / P2  2.25 kW Weight: 163 kg Dimensions: 1024 x 793 x 2048 mm Extraction port diameter: 2 x 100 mm Included in delivery: 1 blade set, length 3865 mm, 3-piece Item no.: 5155303SET Location: 97447 Gerolzhofen

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Bdodjcnw U Dspfx Abvsh Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baru, Bandsaw HOLZKRAFT HBS 433 - Demonstration Unit - Upper and lower saw blade guides, Quick-release mechanism via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with fence: 370 mm Max. cutting width without fence: 410 mm Max. blade length: 3,345 mm Table size: 610 x 431 mm Table tilt: -10° to +45° Motor 400 V: 1.5 kW Extraction port diameter: 2 x 120 mm Cutting speed: 900 / 450 m/min Dimensions (LxWxH): 768 x 512 x 2,048 mm Weight: 130 kg Scope of delivery: Bsdpfx Abeu R S Akjvsdh 3 bandsaw blades 6 / 16 / 25 mm - New demonstration unit -

Kondisi: baru, - New - Description: - Vertical design for splitting short and metre logs - Robust and solid construction - Impact and scratch-resistant due to high-quality powder coating - Quick, tool-free adjustment of the splitting height - Low base plate for easy, fatigue-free loading of large logs - Phase inverter included on all 400 V models - Convenient transport with hand-drawbar thanks to standard chassis with large pneumatic wheels and additional support wheel - Space-saving storage by simply lowering the cylinder - High-performance industrial hydraulic system - Two-hand safety control - With split material holder Technical Data: Dimensions and Weight Length approx. 1,050 mm Width/Depth approx. 1,700 mm Height approx. 2,500 mm Weight approx. 373.1 kg Drive PTO speed 540 rpm Power input 5.5 kW Electrical Data Connection voltage 400 V Mains frequency 50 Hz Equipment Data Maximum splitting force 26.1 t Minimum splitting length 560 mm Bedpfsvwfziex Abvodh Maximum splitting length 1,100 mm Minimum log diameter 80 mm Maximum log diameter 400 mm Hydraulic System Hydraulic oil tank capacity 30 l Art. No. 5981031

Kondisi: baru, The worktable is made of heavily ribbed cast iron and the base frame of welded steel, ensuring torsional rigidity and vibration-free operation. This is a premium-quality machine at a true entry-level price. Unique in its performance class: - Format sliding table made from anodized aluminum for maximum cutting precision - Cutting plane directly at the saw blade - Tiltable saw blade unit from 90–45° - Table extension arm with aluminum crosscut fence and adjustable flip stop for panels and large workpieces - Parallel fence with round bar guide and fine adjustment - Powerful motor - Made in Europe Dimensions and weights Net weight (approx.): 170 kg Dust extraction connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Transport width: 680 mm Working area: 1600 mm x 2300 mm Footprint required: 2613.5 mm x 2134 mm Please add the given dimensions to the footprint to ensure the recommended installation space for the machine. The dimensions account for maximum travel distances or usable lengths. Electrical data Connection voltage: 400 V Drive motor: 1.8 kW Phases: 3-phase Rated operation mode for drive motor: S6 Current type: AC Duty cycle for drive motor: 40% Bdodpfxevxr S Ro Abveh Mains frequency: 50 Hz Sliding table and worktable Format sliding table: 1140 mm x 200 mm x 70 mm Worktable: 1024 mm x 224 mm x 900 mm Circular saw unit Cutting width with parallel fence: 700 mm Max. cutting height at 90°: 67 mm Max. crosscut width left of saw blade: 1200 mm Max. cutting height at 45°: 40 mm Edging length: 1200 mm Saw blade diameter: 250 mm Saw blade tilt: 90–45° Saw blade speed: 3900 min¯¹ Scope of delivery Table extension Anodized aluminum format sliding table Parallel fence with round bar guide and fine adjustment Aluminum flip stop Excenter clamp Art.-No. 5504113

Kondisi: baru, - NEW - DESCRIPTION - Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing and a solid steel sheet base - Cast iron saw table with precisely ground and polished surface - Convenient laser device for cutting line marking - Quick-release saw blade tensioning via eccentric lever on the rear of the machine - Standard with two speeds - Precise 3-roller saw blade guides, fitted top and bottom as standard - Rapid cutting height adjustment via rotary knob and rack with millimeter scale - Smooth-running aluminum parallel fence with quick eccentric clamping and magnifier - Standard miter fence, adjustable ±60° to both sides - Safety switch for automatic shut-off when opening the door TECHNICAL DATA Dimensions and Weights - Length (product) approx. 1,020 mm - Width/Depth (product) approx. 850 mm Bdsdpfovxr Nvsx Abvoh - Height (product) approx. 1,982 mm Extraction Connection - Extraction port diameter: 2 x 120 mm Work Table(s) - Work table length: 535 mm - Work table width: 535 mm - Work table height: 945 mm - Max. work table length: 685 mm - Work table extension length: 535 mm - Work table extension width: 150 mm - Work table tilt: -10 – 45° - Note: For safety reasons, from 20° a stop or holder must be fitted to prevent wood slippage! Electrical Data - Supply voltage: 400 V - Mains frequency: 50 Hz - Power output: 2.25 kW Cutting Capacity - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm Saw Blade - Saw blade speed(s): 850 / 430 m/min - Flywheel diameter: 530 mm - Saw blade length: 3,865 mm - Max. saw blade length: 3,872 mm - Saw blade guiding: precision guides above and below SCOPE OF DELIVERY - Miter fence ±60° - Laser device for cut line marking Article number: 5155303

Kondisi: baru, en_001 Bdodpfeu Diwljx Abvjh

Kondisi: baru, - Heavy-duty profile design with high dead weight for maximum running smoothness - Quiet and precise operation thanks to torsion-resistant machine housing - Large, one-piece, heavy-duty cast iron saw table, tiltable from 0° to +45°, with ground and polished surface - Large cast parallel fence - Fast and precise adjustment of cutting height via handwheel and rack with millimeter scale - Supplied as standard with angle stop - Precision 3-roller blade guide with guide rollers above and below, with fine adjustment - Eccentric quick-release lever. The basic tension setting remains unchanged, with integrated blade tension indicator - The saw table is mounted on a double rocker support, allowing simple and quick locking of the set tilt angle via quick release - Eccentric quick-release lever - The basic tension setting remains unchanged - With integrated blade tension indicator - The solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack guide - Continuously variable tilt from 0° to 45° - Simple and quick locking of the set tilt angle via quick release Technical data: Work table dimensions: 750 x 530 mm Cutting speed: 1400 m/min Flywheel diameter: 530 mm Bdodovwfbcspfx Abvjh Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Blade length: 4190 mm Precision guide top/bottom Saw table tilt: 0° – +45° with rack and handwheel Motor power: 400 V/50 Hz/P2 3.75 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 mm Extraction port diameter: 2 x 100 mm Includes: 1 saw blade set, length 4190 mm, 3-piece Item no. 515 5313 SET Located at 97447 Gerolzhofen

Kondisi: baru, new Description: - Vertical design for splitting short and meter-length logs - Robust and solid construction Bsdpfxjvxr Ryj Abvsdh - Impact and scratch resistant thanks to high-quality powder coating - Quick, tool-free splitting height adjustment - Low loading plate for easy, fatigue-free loading of large logs - Phase inverter on all 400 V models - Convenient transport using manual drawbar with standard chassis equipped with large pneumatic wheels and an additional support wheel - Space-saving storage thanks to easily lowerable cylinder - High-performance industrial hydraulic system - Two-hand safety operation - With log holding device Technical Data: Dimensions and Weights Length approx. 1050 mm Width/Depth approx. 1700 mm Height approx. 2500 mm Weight approx. 282 kg Drive PTO speed 540 rpm Machine Data Max. splitting force 23.4 t Min. splitting length 560 mm Max. splitting length 1100 mm Min. log diameter 80 mm Max. log diameter 350 mm Hydraulic System Hydraulic oil tank capacity 24 l Art. No. 5981023

Kondisi: baru, Tahun pembuatan: 2025, Band width: 200 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Bdsdpfohy Iyvex Abvsh Tiltable sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Kondisi: baru, Tahun pembuatan: 2025, 4-knife cutterblock for optimum planing results Smooth operation due to precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally available with rubber-coated roller Bsdpfx Abjd Hx Hnevjdh The working table is mounted on four oversized columns, guaranteeing maximum stability under all working conditions. Thickness table adjustment via handwheel with numeric display for set planing height (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator's side Powerful industrial motor Robust steel and cast iron construction Equipment details: Working table Mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions Special lifting mechanism keeps the table position securely in place even without locking Tersa cutterblock No more adjusting or screwing Cutter change in seconds Self-locking Extremely quiet operation Thickness table adjustment on S 41 elite s Via handwheel with numeric display for set planing height (accurate to 0.1 mm) Dimensions and weights Length approx. 900 mm Width/depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Extraction port diameter for thicknessing: 120 mm Drive power Main motor: 5 kW Installation information Required space length: 1070 mm Required space width/depth: 900 mm Required space height: 1100 mm Note on space requirement: Dimensions take into account maximum axis travels or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Note on working area: Please add the specified values to the required space to obtain the recommended free installation area for the machine. Thicknessing table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 180 mm Maximum cutting depth: 5 mm Electrical data Connection voltage: 400 V Cutterblock Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Feed speed: 6/12 m/min

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Bedpfecnw T Iex Abvsdh Designed for wood chips and wood dust. Engineered for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation Application Area Clean air extraction systems for wood chips and wood dust Specifically designed for commercial environments Suitable for all woodworking machines with a matching extraction port diameter Can also be used for multiple dust sources High-quality, well-thought-out construction Rugged and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, ensuring versatile use Large inspection openings Large-capacity, mobile chip containers with clamp lever and chip collection bag Unit comes fully assembled upon delivery, allowing for immediate use Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made from polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic version, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control box Fan positioned downstream of the filter Equipment Details: Featuring innovative locking mechanism for secure container positioning All units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³ Scope of Delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with brakes Manual cleaning Model RLA 160 Article No. 5131620 Technical Data Suction port diameter: 160 mm Nominal airflow: 1,448 m³/h Maximum airflow: 2,400 m³/h Negative pressure at nominal airflow: 2,247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (

Kondisi: baru, Tahun pembuatan: 2026, en_Holzkraft_Minimax_ST_5es Bdedpfed Hx Hmjx Abvsh

Kondisi: baru, Tahun pembuatan: 2025, Four-knife cutterblock for optimal planing results Smooth operation thanks to a precision unit and heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed Satin-finished steel outfeed roller, optionally with rubber-coated outfeed roller The work table is supported on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment via handwheel, with numeric indicator for set planing height (precise to 0.1 mm) Standard with two feed speeds, comfortably selectable from the operator side High-performance industrial motor Robust steel and cast iron construction Equipment Details: Work Table Mounted on four large-dimensioned spindles to guarantee utmost stability in all working conditions Special lifting mechanism ensures the table position remains accurate even without locking Tersa Planer Cutterblock No more setting or screwing Planer knives can be changed within seconds Self-locking Motorized Thickness Table Adjustment on S 52 elite s Thickness table height is motorized with electronic decimal display For increased precision and operator convenience Dimensions and Weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust Extraction Connection Thickness extraction port diameter: 120 mm Drive Power Main motor: 7 kW Bdodpfxod Hx Hpo Abvsh Installation Information Required space length: 1440 mm Required space width/depth: 1071 mm Required space height: 1088 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1030 mm Machine body width/depth: 998 mm Length: 1000 mm Width: 1800 mm Work area explanation: Please add the given measurements to the required space to get the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. material removal: 5 mm Electrical Data Connection voltage: 400 V Planer Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2026, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Bdjdpjih Dwvsfx Abvjh Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Bedpfocnxa Ssx Abvodh Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Model No. 5500557

Kondisi: baru, Tahun pembuatan: 2025, FS 41 Classic Tersa - Planer-Thicknesser with TERSA Quick-Change Cutter System Equipped with TERSA cutter block for changing planer knives in seconds. The TERSA knife system ensures especially quiet operation. Helically toothed steel infeed roller for constant and uniform wood feed. The extra-long one-piece planer tables allow easy straightening of large workpieces. Large planer fence remains in place when opening the planer tables. Planer tables open to the rear. The high machine weight ensures maximum precision and smooth running. Powerful industrial motor. Robust steel/cast iron construction. Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Planing Table --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Table --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Bedpfx Abocnxayevjdh Feed speed: 7 m/min Cutter block diameter/knives: 72 mm / 3 pcs. Speed: 5200 rpm Motor: 400V/50Hz/S6 40% 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutter Block No adjustment or screws required Knife changes in seconds Self-locking Exceptionally quiet operation Planing Units Massive anti-kickback devices prevent workpiece kickback 3-knife Tersa block ensures optimal planing finish Wood Feed Helically toothed steel infeed rollers for constant and uniform wood feed without marking 13 teeth engaged simultaneously for powerful feed Wear-free compared to rubber feed rollers Extraction Hose Connection Extraction ports for both planing and thicknessing functions are aligned in the same direction Hose connection is accessible from one side only No need for a hose looping around the machine