Beli Homag Cnc 5 Achs bekas (478)

Kondisi: bekas, nomor mesin/kendaraan: 008321, arbeitsbereich_achse Hfjdpfxjx A Tdlo Ag Rod

Kondisi: bekas, nomor mesin/kendaraan: 007328, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 1850 mm Level kerja: Dengan penyangga konsol vakum Daya spindle utama: 15 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 31 Jumlah posisi alat: 10 Hfsdpfx Aoxmgybjg Rod

Kondisi: bekas, nomor mesin/kendaraan: 007329, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 1850 mm Level kerja: Dengan penyangga konsol vakum Daya spindle utama: 15 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 31 Hfsdpfx Agjxn Nfvo Rjd Jumlah posisi alat: 10

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. Hfsdpfx Agsyqybuj Rod External reference: 5321

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, lebar kerja: 1.935 mm, jumlah spindel: 40, tinggi pelat: 350 mm, panjang kerja: 6.200 mm, jumlah sumbu: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Number of tools in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW Hfedpfx Aoyqx U Heg Rjd EQUIPMENT Vacuum cups for securing workpieces Safety mats at the front Vacuum pump Waste chip conveyor Fixed grooving unit for creating grooves in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 8105

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Data Umum Kedalaman pengukuran: 7755 mm HOMAG Optimat KAL 310 ini diproduksi pada tahun 2007. Mesin edgebander versi kiri ini memiliki ketebalan benda kerja maksimal 60 mm dan kecepatan makan hingga 24 m/menit. Dilengkapi dengan sistem pengeleman tepi PU dan unit PowerControl PC 22, mesin ini memiliki panjang 7755 mm dan mampu menangani ketebalan edging hingga 3 mm. Pertimbangkan kesempatan untuk membeli HOMAG Optimat KAL 310 edgebander ini. Hubungi kami untuk informasi lebih lanjut. Hfodpfex D Nqwjx Ag Rsd Jenis Aplikasi Pelapisan Tepi

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction beam traverses: 8 Number of tool changer positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Hfsdpfeyttf Sjx Ag Red Control model: PC85 EQUIPMENT CE mark Front safety cover The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of traverse beams with suction: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of places: 18 Hsdpfx Asyttcwjg Rjfd Tool magazine 2 Number of places: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, safety, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 Hfedpsytr Hbjfx Ag Rjd No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. • Line workpiece capacity: • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness Hsdpfxsytf Iro Ag Rsfd • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Lini produksi industri HOMAG WEEKE ini diproduksi pada tahun 2007. Lini ini dilengkapi dengan sistem lengkap untuk pemrosesan panel volume tinggi dan edge-banding, termasuk sistem pemuatan otomatis, konveyor rol sentral, beberapa modul edge-banding, serta manipulator portal untuk penumpukan. Cocok untuk produksi kayu yang efisien, memastikan penanganan yang cepat dan presisi. Pertimbangkan kesempatan untuk membeli lini produksi industri HOMAG WEEKE ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Produksi Lengkap Hfedsx D Dq Sspfx Ag Rod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, HOMAG KAL 310/7/A3 ini diproduksi pada tahun 2010. Mesin pelapis tepi satu sisi bekas dengan majalah tepi ISAS 28 posisi, unit perekat PU, dan sistem pengembalian Boomerang. Dilengkapi juga dengan unit milling join dengan dua motor serta sistem pelengketan PU 34 dengan kapasitas hingga 6 kg/jam. Ideal untuk aplikasi pelapisan tepi yang presisi. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hodpfx Aex D Ra Tsg Rsfd Jenis Aplikasi Pelapis Tepi

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 4 Hodpfx Agsx D Dvno Refd HOMAG Optimat BAZ41/30/K Event ini diproduksi pada tahun 2002. Merupakan pusat pemrosesan CNC bekas dengan area kerja 3000 x 1050 mm. Pertimbangkan peluang untuk membeli pusat pemrosesan CNC HOMAG Optimat BAZ41/30/K Event ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pemrosesan Kayu CNC

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 39.359 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-201-04-0605, Deskripsi Peralatan Utama: Meja penjepit dengan konstruksi aluminium matriks Sistem vakum disiapkan untuk teknologi nesting 1000 m³/jam Panel kontrol Power Control dengan PC85 Spindle utama 15 kW dengan sensor getaran Poros C dengan antarmuka agregat Antarmuka untuk agregat FLEX-5 Penukar alat tipe piring dengan 10 posisi Hfjdpeyucyzefx Ag Red Unit pengeboran: 13 spindle – 9 vertikal dan 2+2 spindle horizontal Paket perangkat lunak untuk komputer kantor Perangkat lunak WoodWOP Tools Kecepatan pemposisian maksimum: 80 m/menit pada arah X dan Y (kecepatan vektor: X/Y = 113 m/menit) / 30 m/menit pada arah Z

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Mesin pelapis tepi diproduksi tahun 2009. HOMAG PROFI KAR310/11/A20/S2 ini dilengkapi dengan sistem pengembalian benda kerja BARBARIC. Pertimbangkan kesempatan untuk membeli mesin pelapis tepi HOMAG PROFI KAR310/11/A20/S2 ini. Hubungi kami untuk detail lebih lanjut. • Kondisi: Bekas Perlengkapan tambahan Hfsdpfx Aoyhqi Dog Red • Sistem pengembalian benda kerja BARBARIC

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), kecepatan spindel (maks.): 8.000 rpm, en-001 Hfodpfx Agjygvnpe Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat-screen monitor. The edgebander processes edge thicknesses from up to mm and workpiece thicknesses up to 60 mm. The variable feed speed is 20 m/min. The total length is 7360 mm. Please contact us for further information about this machine. • Edge thickness: mm • Maximum roll diameter: 3 x 45 mm or 0.8 x 65 mm • Workpiece thickness: 8 - 60 mm • Variable feed speed: 20 m/min • Electrical connection: 400 V - 3 Ph. - 50 Hz • Pneumatic connection: 6 bar • Swiveling control panel at machine infeed • Durable short-stroke membrane keyboard • Color graphic flat-screen monitor Hedpfsx Enkbox Ag Rofd • Industrial PC with CompactFlash disk for mass storage • Unit function keys with LED status indicator • Operator guidance with colored pictograms • Online language switching between various foreign languages • Total length: 7360 mm • The control unit had a boot process and lost your saved data. In 2014, the machine had 1,911 hours. In 2016, the machine had 2,642 hours. The machine operated on average 300-350 hours per year. This means the current total running hours are approx. 5,900 hours.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, HOMAG KAL 330/6/A3/S2 ini diproduksi pada tahun 2009. Mesin edging bekas dengan unit pengeleman untuk lem peleleh EVA, zona penekanan, unit pemotong, router kopi, scraper, dan unit polishing. Dilengkapi dengan sistem pengembalian benda kerja LIGMATECH. Manfaatkan kesempatan untuk membeli mesin edging HOMAG KAL 330/6/A3/S2 ini. Hubungi kami untuk informasi lebih lanjut. Hedpoychdusfx Ag Rjfd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jumlah sumbu: 4, kecepatan spindel (maks.): 18.000 rpm, en-GB Hsdpfxsx D Ribe Ag Rofd

Kondisi: bekas, Tahun pembuatan: 2013, tinggi total: 2.100 mm, panjang total: 9.000 mm, lebar total: 1.050 mm, en-001 Hodpjyrp Uajfx Ag Refd

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0010622 - Kode Produsen: 2-083-01-0276 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin Kompatibel: - Berat: 3 kg - Dimensi: 36x26x21 - Jika berminat, kami menawarkan layanan overhaul, silakan hubungi kami. Hfjdpfsyrq Alox Ag Rjd

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: RU0010621 - Kode Produsen: 2-083-01-0278 - Kondisi: Bekas - Fungsi: Belum diuji - Mesin yang kompatibel: - Berat: 3 kg - Dimensi: 36x26x21 - Jika berminat, kami menawarkan layanan perbaikan, silakan hubungi kami. Hfjdpjyrqzuefx Ag Rjd

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: RS0003572 - Kode Produsen: 2-007-03-3970 - Kondisi: Seperti baru (barang pameran) - Fungsionalitas: Berfungsi penuh - Mesin Kompatibel: - Jika berminat kami menawarkan layanan pemeriksaan, silakan hubungi kami. 2KG - 36X26X21 Hfedpfx Asyrn Ryog Rsd

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: RS0003547 - Kode Produsen: 3-008-23-1410 - Kondisi: Seperti baru (barang pameran) - Fungsionalitas: Berfungsi penuh - Mesin kompatibel: - Jika berminat kami menawarkan layanan rekondisi, silakan hubungi kami. 4KG 46X39X27 Hfsdpsyrn I Esfx Ag Rsd

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Hedpfx Agjifnxxj Rsfd Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°