Beli Homag Kal bekas (473)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Travel distance Z: 535 mm, traverse speed X/Y/Z: 60 m/60 m/30 m/min, max. workpiece dimensions X/Y/Z: 4175 mm/1730 mm/300 mm. Main spindle: Power: 18.5 kW, speed: 24,000 rpm, max. tool diameter: 200 mm, max. tool length: 200 mm, max. tool weight: 6 kg. Drilling diameter: 35 mm, speed: 6,000 rpm, power: 4 kW, stroke: 50 mm, swivel range: 100°, cross-cut saw diameter: 180 mm, number of spindles: 4, vacuum pump capacity: 100 m³/h. Documentation available. On-site inspection possible. Ledpfswmqw Hjx Ab Nsru

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-253-84-7710, en-001 Ljdpfew Rk E Dex Ab Neru

Kondisi: bekas, nomor mesin/kendaraan: 008144, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 1200 mm Lodpfx Aow Idf Sob Noru Permukaan kerja: Meja nesting Daya spindle utama: 10 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 7 Jumlah posisi alat: 7

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-95-7962, tinggi benda kerja (maks.): 850 mm, panjang benda kerja (maks.): 2.500 mm, daya: 11,5 kW (15,64 hp), sambungan udara terkompresi: 7 batang, Mesin dalam kondisi kerja yang sangat baik tanpa cacat. Dapat dilihat beroperasi dan diuji sendiri. Jam kerja rendah, foto akan segera ditambahkan. Berlokasi di London Timur Laut. Dapat dikirim ke seluruh Eropa. Silakan hubungi jika membutuhkan informasi lebih lanjut. Lrodpfx Abetwfv Re Nou

Kondisi: sangat baik (bekas), 4-sided formatting and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) First double-sided formatting and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 FORMATTING SECTION: Double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine Lrjdjiztxyjpfx Ab Nou EDGEBANDING SECTION: Top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), Groove milling unit for rebates and grooves UF11 (4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) KZ0400c) Rotating station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/25/12 (from longitudinal to transverse) Feed speed (adjustable): 20–60 m/min KZ0400d) Second double-sided formatting and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 FORMATTING SECTION: Pre-milling cutter (chamfering) (1 x 4.5 kW), double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine EDGEBANDING SECTION: Cross-cutting unit HL 84 (2 x 0.22 kW), top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile copying milling unit FF32 (4 x 0.4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) MINIMUM EDGE LENGTH 70 MM (workpiece thickness for narrow parts max. 25 mm, edge thickness max. 2 mm, cycle speed: max. 20 pcs/min, feed speed max. 20 m/min.)

Kondisi: baik (bekas), Independent machine - universal machine (first & second in a production line) Ledpsdh Tfksfx Ab Neru Control system: Power Control 22, WoodCommander software (Windows) Safe and soundproof housing No. 2+2 vertical uprights to support the working units Min. usable working width (mm): 155 Max. usable working width (mm): 2500 Min. usable working thickness (mm): 12 Max. usable working thickness (mm): 60 Max. workpiece length in front of the stops (mm): 1200 Retractable positioning stops, spacing (mm): 500 Feed rate (min/max), infinitely variable (m/min): 10 - 30 No. 4 working groups (for each side of the machine): 1 safety cutter (pre-milling) 1 x 4.5 kW 2 chip removal units (KD 11) 2 x 6.6 kW 1 milling unit (0°-25°) 2 x 0.4 kW

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Lrodpsifnxxofx Ab Neu Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: sangat baik (bekas), Double-sided sizing and edge banding line (also "softforming") with automatic conveying system. Suitable for panel thicknesses up to 100 mm. Consisting of the following machines: W05025A) Loading device (gantry) "MAHROS" model Brush W05025B) Double-sided sizing and edge banding machine "HOMAG" model KFL 620/23/QE/30 (softforming) SIZING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free slot Left only: 2 x universal milling units (swivable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (hot melt glue + premelter) Edge magazine for rolls (slot no. 1) Edge pressure zone both STRAIGHT and SOFTFORMING End trimming unit WK14 (2 x 0.8 kW) Milling unit (2 x 0.55 kW) Contour copying milling unit FF 12 (4 motors) WD70 Lrodjtt Dqpopfx Ab Nou Profile scraper unit PN20 Finishing unit (flat scraper + polishing unit) FA11 W05025C) Stacking device (gantry) "MAHROS" model Brush

Kondisi: sangat baik (bekas), Panel cutting saw with rear lift table loading Control: Power Control (CADmatic 4.1 - Professional) Lift Table Loading (mm): 4300 x 2200 Rear Pushers (qty): 1 With clamping grippers (qty): 7 Max. cutting width (mm): 4300 Useful stroke of pusher (mm): 6750 Max. saw blade projection (mm): 110 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 420 mm / 18 kW Adjustable saw carriage feed (m/min): 1 - 150 Front air cushion tables (qty): 3 + 1 longitudinal Total connected load (kW): 28 Lrodpfed Nt N Uox Ab Neu OPTIONAL EQUIPMENT: Label printer Optimization software Schnitt Profi(t) Practive

Kondisi: sangat baik (bekas), en-001 Lrsdpfx Abjdg Itns Nju

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: Lodpfjdg Itmox Ab Noru U06051) Motorized roller conveyor (infeed table) "HOMAG" Model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" Model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model Profi TDL 310/25/12 U06054) 2nd double-sided sizing and edge banding machine "HOMAG" Model Profi KFL 526/9/A3/25

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: Lrodpodt Rgvefx Ab Neu VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), LONGITUDINAL-CROSS ROTARY TRANSFER Equipment for transfer between two double-end tenoners (or two double-sided edge banding machines) in a straight line (inline) configuration, or can be placed in front of an independent double-end tenoner (or edge banding machine). Designed to rotate workpieces by 90°, suitable for use from longitudinal to crosswise transfer. Ledpfx Absd Siyde Njru Equipped with integrated control cabinet and operator panel. Overall length: 6200 mm 1st Roller conveyor (longitudinal), with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer unit, with double cone (1 top + 1 bottom) 2nd Roller conveyor (crosswise), with motorized rollers: approx. 2500 x 3000 mm Max. panel dimensions: 195 x 250 mm Max. panel dimensions: 1200 x 2500 mm Min./Max. panel thickness: 12 – 40 mm Total connected load: 3 kW

Kondisi: diremajakan ulang (bekas), PC control: Power Control Professional type Software: woodWOP / TopDrill BST No. 2 through-feed motorized conveyor belts (4 x kW?) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) Lrsdsdz Uk Tepfx Ab Nou No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units per lower vertical drilling support (2 x 1.5 kW) Various spindles for each lower drilling support unit No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units per upper vertical drilling support (2 x 1.5 kW) Various spindles for each upper drilling support unit No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Kondisi: sangat baik (bekas), Return conveyor system for edge banding machine (LEFT) When combined with a single-sided edge banding machine, it enables one operator to feed the machine continuously (the processed workpiece is automatically returned to the operator). Lsdpfx Abjgz Atbj Noru Roller conveyor with 180° transport belts: 2600 mm x 1800 mm 1st conveyor section: 7000 x 900 mm 2nd conveyor section: 2500 x 850 mm Model: BOOMERANG BONSAI

Kondisi: sangat baik (bekas), CNC flexible automatic through-feed drilling machine (gantry machine) with dowel insertion system Moving panel (workpiece), moving working head (horizontal panel-workpiece) Control: PowerControl, Software: WoodWOP Integrated machine safety enclosure Workpiece drive via 3 conveyor belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X - Y - Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS (TOP): Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 38 + 3 special Independent horizontal drilling spindles (qty.): 6 Grooving saw unit (for machining in X-axis), blade diameter (mm): 100 Vertical main spindle (milling unit), qty.: 1 x SK 30 (vertical main spindle power: 6 kW) Automatic tool change system, disc tool changer, qty.: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty.): 2 Horizontal drilling spindles – right side (qty.): 13 + left side (qty.): 13 Ljdpfx Abed Nvi Dj Nsru Injection nozzles for glue application and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty.): 1

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Ljdpfx Asgwbbqeb Njru Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), Laminating line also suitable for panels with 'J', 'U', 'L' profile and 45° angles. Min/max panel dimensions: 260–1300 mm (width) x 1850–4250 mm (length) Coating: decorative paper > 40 g/m² – 120 g/m² or PP, PET, PVC PUR adhesive (with NORDSON premelter) Comprising: 01) Infeed unit with double station 'ESSEDUE' (bridge loader) 02) Wide belt sanding machine 'BUFTERING' Model SWT 955 03) Motorized roller conveyor 'HOMAG' Model TVL 100 04) Brushing and cleaning machine 'WANDRES' 05) Gluing with 2 'NORDSON' premelters for PUR glue 06) 'HOMAG' Model KFK 200 machine featuring: - Double glue application unit - Coil unwinder Ledpowd Tcasfx Ab Neru - Calender (roller press) - Side folding and pressure zone for surplus material - Panel edge processing area 07) 'HOMAG' cross-cut saw 08) Stacking unit with double station 'ESSEDUE' (bridge unloader)

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) - 5 Axes (DRIVE 5C+) Gantry machine (mobile in X-axis) Control unit (PC85) with woodWOP software Safety enclosure for the machining head Clamping table with console system Mod. K-Table Console support arms (qty) 10, Clamping table dimensions (mm) 1250 Lrjdpfsnzhwhjx Ab Nsu Pneumatic kit powerClamp – clamping system – K Table Workpiece collet with automatic tool change system Rotary tool changer – magazine positions (number of tool slots) 14 Max. working area (X - Y - Z): mm 6175 x mm max 1550 x mm 300 No. 2 working zones – Vacuum pump (capacity, m³/h) 2 x 100 Chip conveyor With separate electrical and control cabinet. Total connected load (kW) (50 A) WORKING UNITS (TOP): No. 9 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X axis + 2 on Y axis) (kW 1.5) No. 1 Vertical main spindle (milling unit) HSKF63 DRIVE 5C+ (kW 10)

Kondisi: sangat baik (bekas), PANEL SAW WITH REAR LIFT-TABLE FEED Control: Power Concept Software: CADmatic 4 Professional Lift-table feed (mm): 4300 x 2200 No. 2 Rear Pushers (TWIN PUSHER) Model: POWER CONCEPT With clamps Feeding device for thin panels (minimum thickness mm 3) Max. cutting width (mm): 4300 Usable pusher stroke (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 / 2.2 kW Main saw (max. blade diameter / power): 380 / 13.5 kW (max. 18) Adjustable saw carriage feed rate (m/min): 1 - 150 Front air cushion tables (pcs): 4 Lsdsimr Icopfx Ab Noru Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) CUTTING PRO PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Lredpjh T Dvtefx Ab Nsu Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 AXES Gantry-style Design Control System: Power Control PC85 – woodWOP Software Protective Enclosure for Machining Head Clamping Table with 10 Consoles (1500 mm) LASER System on X-Axis – for positioning the consoles and Y-Axis for vacuum clamps Automatic Tool Change System 2 Disc Tool Changers – Magazine Positions / Tool Slots W8 (8 units) + (3 units) Maximum Working Area (X - Y - Z): 6000 mm x max. 1600 mm x 125 mm 4 Working Zones – 2 x Vacuum Pumps (Capacity: m³/h) With separate Electrical and Control Panel Total Connected Load (kW): Approx. 27.5 OPERATING UNITS (TOP): 21 Independent Vertical Drilling Spindles (High Speed 7500) Lrodpor Ai Sqefx Ab Nsu 10 Independent Horizontal Drilling Spindles (6 on X-axis + 4 on Y-axis) Drilling Head Motor Power (kW): 2.3 1 Vertical Main Spindle (Routing Unit) HSK 63: 9 kW 1 Grooving Saw Unit, Diameter 125 mm, N1 – Swivelable 90° in X-Y direction

Kondisi: sangat baik (bekas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Lodpfjinigmsx Ab Neru Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 – 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC controlled) – Edge magazine for rolls (No. 12 positions) End trimming unit WK13 (BEVEL/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC controlled) MF 21 (2 x 0.55 kW) Profile milling unit (copying) FF 32 (4 x 0.4 kW) automatic changeover device Contour milling unit (for fine milling) CNC controlled FK 31 (30 m/min) recently added after technological overhaul Multi-profile scraper unit (CNC controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Lrsdpfx Aeh Ryhnjb Nou Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), Control unit Power Control + CadMatic 4 Professional software Roller conveyors for lifting table feed (qty) 1 x 18,000 mm + (OPTIONAL: transverse chain sections in 10-ton lifting table, 5,600 mm) Lifting table (mm) 5,600 x 2,200 VAC insertion trolley for gentle loading of sensitive single panels via vacuum 1st infeed saw with clamping tongs (qty) 6 Lsdsf Nkv Sjpfx Ab Nsru Rotation device (for panels) 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd infeed saw with clamping tongs (qty) 7 (+1) 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Oscillating chute, chip removal conveyor, with cross-cutting unit (19.5 kW) No. 2 front air cushion tables (+1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables type 68/20 and type 58/24 + No. 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW