Beli Homag Kal bekas (489)

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes (5 Axes with FLEX 5) Portal machine (mobile in X-axis) Control Powertouch (PC85), woodWOP software Work head safety enclosure Clamping table with K-Table model consoles Console support arms (qty) 8, Clamping table dimensions (mm) 1340 Automatic positioning of consoles (X-axis) LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamp, Automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (tool stations) 18 Max. working area (X-Y-Z) mm 4000 x 1550 x 60 Max. working area (X-Y-Z) in edge-banding mode mm 4000 x 1500 x 60 Work area – Vacuum pump (capacity in m³/h) 100/140 Chip conveyor With separate electrical and control cabinet Total connection load (52 A) WORKING UNITS (TOP): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW) 2.2 No. 1 Vertical main spindle (milling unit) HSK 63 (kW 15) Edge-banding unit Power Edge (Y-axis), edge-banding aggregate (hot-melt adhesive + pre-melter) Roll material (edge banding) thickness (min/max) mm 0.4 – 3 Edge band magazine for rolls (compartment position no. 1) Ledpfxew Dc Nio Aahshr Pre-trimming station (cutting unit) No. 1 Traverse unit (4 horizontal drilling spindles) No. 1 Circular saw unit (diameter mm 125) Combination unit (flush trimming – profile scraper knife)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Panjang pemotongan: 3200 mm Jarak menonjol mata pisau: 65 mm, kecepatan kereta pisau hingga 60 m/menit Kecepatan penekan: hingga 25 m/menit Lhsdox Na Awopfx Aahor Motor pisau utama: 5,5 kW Diameter pisau utama: 300 mm Kontrol: Perangkat lunak CADMATIC 5.0

Kondisi: sangat baik (bekas), Control unit Power Control + CadMatic 4 Professional software Roller conveyors for lifting table feed (qty) 1 x 18,000 mm + (OPTIONAL: transverse chain sections in 10-ton lifting table, 5,600 mm) Lifting table (mm) 5,600 x 2,200 VAC insertion trolley for gentle loading of sensitive single panels via vacuum 1st infeed saw with clamping tongs (qty) 6 Rotation device (for panels) 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd infeed saw with clamping tongs (qty) 7 (+1) 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (2.2 kW) Main saw (max. saw diameter / power) mm 570 (30 kW) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Lhjdpjf Nkv Sjfx Aaher Oscillating chute, chip removal conveyor, with cross-cutting unit (19.5 kW) No. 2 front air cushion tables (+1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables type 68/20 and type 58/24 + No. 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW

Kondisi: sangat baik (bekas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM Ljdpfx Aaoinigmohehr "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 – 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC controlled) – Edge magazine for rolls (No. 12 positions) End trimming unit WK13 (BEVEL/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC controlled) MF 21 (2 x 0.55 kW) Profile milling unit (copying) FF 32 (4 x 0.4 kW) automatic changeover device Contour milling unit (for fine milling) CNC controlled FK 31 (30 m/min) recently added after technological overhaul Multi-profile scraper unit (CNC controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving plate (workpiece), stationary working head – horizontal plate (workpiece) PowerControl control unit (woodWOP software) Safety enclosure for the working head No. 2 safety interlock workpiece clamping jaws within the working area Ledpfx Aolkdpmeahehr WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 2500 x 1000 (optional 1300) x 80 mm (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) With separate electrical and control cabinet WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW) WORKING UNITS (BOTTOM): No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Lhodpfeh Ryhnox Aahor Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), PLATE PANEL SAWING CENTER – ANGLE SYSTEM Control: CadMatic 4 Professional Powered Roller Conveyor No. 1 (mm) 2200 x 4400 Lifting Table (mm) 2200 x 4300 Lhsdpfx Aaepuh Dkjhsr First Pusher Saw with Clamping Jaws (No.) 4 First Panel Saw Max. Cutting Width (mm) 4300 Max. Saw Blade Projection (mm) 125 Scoring Saw (Max. Blade Diameter / Power) mm 180 (kW 2.2) Main Saw (Max. Blade Diameter / Power) mm 450 (kW 18) Adjustable Saw Carriage Feed Rate (m/min) 1 – 150 Second Pusher Saw with Clamping Jaws (No.) 8 Second Panel Saw Max. Cutting Width (mm) 2200 Max. Saw Blade Projection (mm) 125 Scoring Saw (Max. Blade Diameter / Power) mm 180 (kW 2.2) Main Saw (Max. Blade Diameter / Power) mm 450 (kW 18) Adjustable Saw Carriage Feed Rate (m/min) 1 – 150 Front Air Cushion Tables No. 2 (+1 additional or more) Total Connected Load (kW) 52.6

Kondisi: sangat baik (bekas), Double-sided formatting and edge-banding line (half line) with max. working width 2500 mm, equipped with an automatic high-speed handling system: A) Double-sided loading station (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) Transfer unit (longitudinal/transverse), "HOMAG" TDL 310/25/12 C) Double-sided formatting and edge-banding machine HOMAG Model KFL526/9/A3/25 D) Transfer unit (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) Double-sided unloading station (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 Ledpfxsrnrrbj Aahehr With line control – WOODLINE CONTROL PC52.

Kondisi: diremajakan ulang (bekas), PC control Power Control Software No. 2 infeed motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 Lodpsvhcbzofx Aahohr No. 6 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor Total connected load (kW): approx. 50 / 60

Kondisi: sangat baik (bekas), Panel dividing saw – with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table loading (mm): 3800 x 2200 Rear pushers (qty): 1 With grippers: 7 Panel rotation device (for sheets) to 90° Lsdpfjh Imvhox Aahjhr Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. saw diameter / power): Ø180 mm / 2.2 kW Main saw (max. saw diameter / power): Ø380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 – 130 Front air cushion tables (qty): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Kondisi: sangat baik (bekas), Independent machine – universal model (first & second in a production line) Control: CNC, NC 21, Homatic software Secure and sound-insulated enclosure No. 3+3 vertical columns to support the working units Min. useful working width (mm): Max. useful working width (mm): 3000 Max. useful working thickness (mm): approx. 100 Max. workpiece length before cams (mm): 1250 Retractable positioning cams, spacing (mm): 1000 Feed rate (infinitely variable) (m/min): approx. 8 – 25 No. 4 working units (for each side of the machine): 1 Automatic scoring unit (1 x approx. 1.5 kW) 1 Milling unit (1 x approx. 4.5 kW) 1 Universal milling unit (electropneumatic control) (1 x approx. 4.5 kW) 1 Free slot Lhjdpfxeh Nx U Nj Aaher

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 Lhedelikvhjpfx Aaher X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Lodpfjt N H Taox Aahehr Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: POWERCONTROL PC23 Power Touch / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop cams, spacing (mm): 1000 Lhsdov Rpdnspfx Aahsr Side adjustment of aggregate carrier manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and post-processing sections FORMATTING PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chipper KD 11 (2 x kW 6.6) + open station EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + pre-melter) A3 + QA65 Edge magazine for rolls (station no. 2). Edge pressure zone (NC-controlled) – Type A End trimming unit PK30 (2 x kW 0.8) Feed speed 30 m/min Pre-milling unit BF20 (2 x kW 0.55) Multifunctional unit (radius milling and profile milling unit) FF30 + FF32 (4 x kW 0.4) FlexTrim Open station Scraper unit PN 20 Finishing unit (flat scrapers + smoothing unit) FA 21. Spraying unit (for polishing fluid) No. 3 universal milling units for grooving/rabbetting and profiling SF20 (3 x kW 6.6) (NC-controlled)

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line comprises the following machines: O06027A) Loading station with double pickup station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge-banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310/25/12 O06027D) 2nd double-sided sizing and edge-banding machine "HOMAG" Model KFL 526/9/A3/25 Ledpowxvdcofx Aahshr O06027E) Connecting roller conveyor "HOMAG" Model TBL 100/25/25 O06027F) Transfer conveyor (on rail) "HOMAG" Model TWL 120/30/02 SS O06027G) Transfer conveyor (on rail) "HOMAG" Model TWL 120/34/02 S O06027H) Unloading station with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, 4-sisi LINI FORMAT & PELAPIS TEPI Dimensi panel: MIN. mm 195 x 250 x 60 / MAKS. mm 1200 x 2500 x 60 Terdiri dari mesin-mesin berikut: O12044a) Meja masuk "HOMAG" Mod. TBL 100/25/12/S dengan rol penggerak O12044b) 1. Mesin format dan pelapis tepi dua sisi "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Stasiun putar (90° MEMANJANG-MELINTANG) "HOMAG" Mod. TDL 310 / 25 / 12 O12044d) 2. Mesin format dan pelapis tepi dua sisi "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25) Ledpfxex Aqbhj Aahohr

Kondisi: sangat baik (bekas), YZ0105) PANEL SAW WITHOUT RETURN TABLE Model HPP 300/56/56 PROFILINE Control system: Power Control POWER TOUCH, Software CADmatic 4 - Professional No. 1 Rear Pusher - (PACK PREMIUM). No. 11 Clamps (1 x Power Concept) Max. cutting width (mm): 5600. Useful stroke of pusher (mm): 5600. Max. saw blade projection (mm): 80 Scoring saw (max. blade diameter / power): mm 180 / kW 1.5 Main saw (max. blade diameter / power): mm 350 / kW 11 (option: kW 18) Adjustable saw carriage feed rate (m/min): 1 - 150 No. 5 Front air cushion tables (mm 500 x 2810) Label printer: PICA II 108 YZ0106) AUTOMATIC PANEL STORAGE SYSTEM Model TFL 211/10/05 Total space requirement (with panel saw): mm 10640 x mm 55660 Lodpfx Aajfg Ewzshehr Movable upper bridge (on the X-axis) with movable carriage (on the Y-axis) and corresponding vacuum suction cup assembly (movable on the Z-axis) Max. speed of movable upper bridge (on the X-axis): 110 m/min Speed of carriage (on the Y-axis): 130 m/min Vacuum suction cup movement speed (on the Z-axis): 70 m/min Vacuum suction cup assembly, rotatable by 90° Automatic TLF management system (via scanner) of cut panels (which remain in storage) Minimum panel dimensions: mm 800 x 2000 Stack dimensions: Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Panel thicknesses (min/max): mm 12 / 40 Stack height: mm 1000 Min. panel dimensions mm 800 x 2000. Max. panel dimensions mm 2200 x 5600 (ST 61)

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) Lhedpfxonzhxqe Aaher - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Lhodpfx Aaop N D Ngjhsr Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), 4-axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. Swan-neck machine – safety tread mats in front CNC control system Type PowerControl PC 85 (Software: WoodWop) 10 supports/consoles (1340 mm) LEDs indicate the programmed vacuum pod positions (Y-axis) Automatic tool change system (rotary changer, 18 positions) Usable working area (X - Y - Z): 6175 x 1550 x 60 mm Usable working area for edge banding (X - Y - Z): 6000 x 1475 x 60 mm 2 working zones – 2 vacuum pumps (capacity: 100 m³/h) Chip conveyor for efficient waste removal from the working process Total connected load: 27 kW Working units (top) - 17 independent vertical drilling spindles (2.2 kW) - 4 independent horizontal drilling spindles - 1 vertical electrospindle HSK F63 (main spindle 11 kW) - 1 grooving saw aggregate (0°-90°), diameter 125 mm Edge banding unit: Power Edge (Y-axis), glue application aggregate (hot-melt glue + pre-melter) Edging material (rolls) thickness (min/max): 0.4 – 3 mm Lhedpfx Ajh Ucn Reahsr Edge roll magazine (2 positions)

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports Lodpsivawpsfx Aahohr No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), Double-sided sizing and edge banding line (short line) max. working width 2500 mm, with automatic high-speed feed system: O02006A) Loading table with roller conveyors "HOMAG" PROFI TBL100/30/12 Lhjdpfsv D U Urjx Aahjr O02006B) Turning device (longitudinal/transversal), "HOMAG" PROFI TDL /310 /25 /12 O02006C) Double-sided sizing and edge banding machine "HOMAG" Model PROFI KFL 526/10/A3/25 O02006D) Turning device (transversal/longitudinal) "HOMAG" PROFI TDL 510/25/12

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and soundproofing cabin Cam spacing (mm): 500 Panel processing (per side): Spray unit (for liquid non-stick agent) Pre-milling unit: 1 x 4.5 kW Lhodpfxjhvi E Is Aahjr Chipper KD 11 (2 x 6.6 kW) LEFT SIDE: Universal milling unit (electropneumatically controlled), SF 20 (1 x 6.6 kW), 0°-90° RIGHT SIDE: Free position / slot EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot no. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x 0.18 kW) Pre-milling unit OPTIMAT (2 x 0.55 kW) Multi-function unit (radius and profile milling) FK 11 - 2 x 0.4 kW Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x 0.25 kW)

Kondisi: sangat baik (bekas), A) Case clamp with CNC (electronic) type MDE 110/28/08 Motorized transport and assembly conveyor Ledpfelkbn Iox Aahjhr Feed speed: 12–40 m/min CNC Control: Power Control PC C 22 T Total power: 14 kW Total machine length: 6220 mm Processable workpiece dimensions: Length min./max.: 250 / 2800 mm Depth min./max.: 120 / 800 mm Height min./max.: 280 / 1320 mm B) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm) C) Motorized conveyor belt model MTB 200/20/08 (length: 2000 mm)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Lhodpfx Aeuhv R Deahsr Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25