Beli House Connection Kolom bekas (17.947)

Kondisi: bekas, Tahun pembuatan: 1978, Pressure 150 t Kdsdpfevut Urex Aa Njg Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright spacing 930 mm Shut height (stroke + ram adjustment at top) 400 mm Lateral upright passage 650 mm Table surface 880x1300 / 1500x600 mm Through-hole in table 760 x 180 mm Table height above floor 1270 mm Ram surface 920x1000 / 1300x600 mm Weight 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed As is, as seen, WITHOUT commissioning Price for commissioning (with new control system) upon request

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force 130 t Distance between uprights 1220/1070 mm Stroke 22 - 96 mm Strokes per minute 20 - 120 spm Die height (stroke + ram adjustment at top) 518 mm Lateral gap between uprights 600 mm Table area 1220 x 880 mm Kdjdpfxovuubyo Aa Nsg Through-hole in table 450 x 250 mm Table height above floor 950 mm Ram area 1180 x 800 mm Drive power 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Ram adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, automatic stroke adjustment, 8-way roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Kondisi: bekas, Pressure 25 t Kjdsvzxq Sepfx Aa Njdg Stroke 500 mm Throat depth 355 mm Installation height 800 mm Table surface 500 x 500 mm Table height above floor 700 mm Ram area 250 x 250 mm Drive power 7.5 kW Weight 2.1 t Space requirement approx. 1.45 x 0.9 x 2.55 m (LxWxH) Throughhole in table 180 mm Permitted only for safe tools or with fixed guard according to German Safety Regulations (UVV) With oil-hydraulic drive, upper and lower stroke limitation, manual lever As is, where is, WITHOUT commissioning, in current condition

Kondisi: bekas, Tahun pembuatan: 1993, Press force 250 t Stroke 500 mm Upright width 1650 mm Lateral upright clearance 750 mm Installation height - stroke up 1200 mm Table area 1650 x 1250 mm Blankholder force in table 80 t Blankholder stroke in table 250 mm Blankholder area in table 1070 x 780 mm Table height above floor 850 mm Ram area 1650 x 1250 mm Kdedpfx Aajv Svb As Njg Downward speed from 10 mm/s Upward speed 80 mm/s Working speed 10 mm/s Oil capacity 400 l Drive power 22.0 kW Weight 21.5 t Space requirement (WxDxH) 2.7 x 2.3 x 4.25 m Height above floor 4.0 mm Approved for manual part loading/unloading in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, pressure- and stroke-dependent control, hydraulic blankholder in the table, hydraulic cut shock damping (4x parallel support cylinders), hydraulic-mechanical depth stop, two-hand operation, hand lever operation

Kondisi: bekas, Tahun pembuatan: 2004, Press force 80 t Stroke 16 - 63 mm Strokes per minute 100 - 750 Upright clearance 970 mm Installation height (Stroke + Ram Adjustment at Top) 380 mm Lateral upright pass-through 380 mm Table surface 940 x 910 mm Through-opening in table 770 x 190 mm Table height above floor 1180 mm Ram area 940 x 510 mm Ram adjustment 76 mm Material width 203 mm Material thickness - 6.0 mm Feed length 0 - 120 mm Drive power 37.0 kW Weight 14.50 t Space requirement approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation in accordance with CE standard With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Kdedpfx Aovuua Nea Nsg Mechanical roller feed Bruderer BBV 205/120 driven by press main shaft/cardanic shaft Guethle CK cantilever brackets Optionally, a soundproof cabin can be offered – price upon request

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force 150 t Throat depth 520 mm Stroke 30 - 200 mm Kdsdpsvuudbofx Aa Njg Stroke rate 15 - 60 /min Distance between table and ram, large stroke top, adjustment top 650 mm Table surface 1600 x 1000 mm Passage opening in the table 1040 x 140 mm Table height above floor 1000 mm Clearance between side frames 1000 mm Ram surface 1400 x 800 mm Ram adjustment 120 mm Drive power 20.0 kW Weight 27.5 t Space requirement (W x D x H) 2.3 x 2.75 x 4.5 m Only approved for use with safety tooling or fixed guarding in accordance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch/brake combination (Ortlinghaus make), hydraulic overload protection in the ram, pneumatic ram counterbalance, semi-automatic ram adjustment Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1993, druckpresse-1979-de Kdjdevuuflopfx Aa Nsg

Kondisi: bekas, Tahun pembuatan: 2011, Press force: 120 t Column width: 430 mm Stroke: 125 mm Distance table/ram, ram at top: 400 mm Table surface: 430 x 450 mm Table height above floor: 860 mm Lateral column passage: 230 mm Ram surface: 250 mm Working speed: 10 mm/s Drive power: 11.0 kW Weight: 2.5 t Kedjvuuhtopfx Aa Nodg Required space (W x D x H): 1.6 x 1.3 x 2.4 m Year of manufacture: 1974 - Overhauled in 2011 Approved for manual loading according to CE standard Equipped with hydraulic oil drive, movable guard, two-hand and foot operation No foundation pit required Can be inspected under power at our warehouse

Kondisi: bekas, Tahun pembuatan: 1968, Pressure: 050 t Throat depth: 250 mm Stroke: 8 - 120 mm Strokes per minute: 115 Distance between table and ram, max stroke up, adjustment up: 420 mm Table surface: 645 x 510 mm Pass-through opening in table: 250 x 180 mm Table height above floor: 700 - 930 mm Table adjustable: 230 mm Ram surface: 220 x 185 mm Kdedjvzxriopfx Aa Njg Ram adjustment: 70 mm Drive power: 3.0 kW Weight: 3.0 t Space requirement (WxDxH): 1.1 x 1.8 x 2.4 m Only approved for safe tooling or fixed guarding in accordance with German accident prevention regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, height-adjustable table, foot operation as is, without commissioning Price for commissioning (in current condition) on request

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 160 t Stroke: 200 mm Kodpowvva Sjfx Aa Nsdg Throat depth: 500 mm Installation height: 500 mm Table surface: 1140 x 980 mm Table height above floor: 860 mm Ram surface: 1000 x 800 mm Oil capacity: 1000 l Drive power: 50.0 kW Weight: 18.0 t Required space approx.: 1.3 x 2.6 x 3.4 m (LxWxH) Through-hole in table: 180 mm Year of manufacture: 1981 – Modernized: 1990 Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Fitted with oil-hydraulic drive; pressure, time, and stroke dependent control; hydraulic cutting shock absorption; mechanical depth stop; two-hand operation. Can be offered unused or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force 50 t Frame gap 800 mm Stroke 4 - 60 mm Strokes per minute 30 - 300 spm Shut height (stroke + ram adjustment at top) 400 mm Side frame opening 350 mm Table area 780 x 640 mm Pass-through opening in table 690 x 140 mm Table height above floor 1150 mm Ram surface 800 x 460 mm Drive power 26.0 kW Machine weight approx. 9.00 t Space requirement approx. 2.4 x 1.7 x 2.9 m Ram adjustment 80 mm Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, automatic stroke adjustment, Kdsdpovut Huefx Aa Neg electronic roller feed (PBK, WV 65-DSM 300P, year 2007) Can be offered in current condition, either without or with commissioning – video from seller prior to dismantling available

Kondisi: bekas, Tahun pembuatan: 2000, Pressure: 25 t Stroke: 150 mm Throat depth: 420 mm Installation height: 450 mm Table surface: 700 x 820 mm Ksdevut N Nopfx Aa Njdg Table height above floor: 850 mm Ram surface: 600 x 600 mm Downward speed: from 370 mm/s Upward speed: 370 mm/s Working speed: 18 - 33 mm/s Oil capacity: 300 l Drive power: 5.5 kW Weight: 5.8 t Space requirements approx. 1.1 x 2.0 x 2.4 m (LxWxH) Approved for manual loading operations according to CE standards. With electro-hydraulic drive, pressure/time and stroke-dependent controls, cut cushioning, mechanical depth stop, and two-hand operation.

Kondisi: bekas, Tahun pembuatan: 2009, Pressing force 40 t Stroke 4 - 100 mm Stroke rate 130 /min Throat depth 230 mm Installation height 475 mm Table size 650 x 460 mm Through-hole in table 205 x 165 mm Table height above floor 710 - 950 mm Table adjustable 240 mm Ram area 435 x 240 mm Ram adjustment 85 mm Drive power 5.0 kW Weight 2.6 t Space requirement approx. 1.2 x 1.7 x 2.3 m Approved for manual loading operations in accordance with CE standard Kdedpfxjvzxpne Aa Neg Equipped with motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot control

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antara tiang: 2800 mm Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Tinggi pemasangan (langkah + penyesuaian slide bagian atas): 560 mm Jalur samping antara tiang: 600 mm Kdsdpfx Asxcp Itsa Njg Ukuran meja: 2700 x 1200 mm Lubang tembus pada meja: 2450 x 450 mm Ukuran peluncur: 2700 x 800 mm Berat: 80,0 t Kebutuhan ruang (PxLxT): 5,1 x 2,65 x 5,25 m

Kondisi: baru, Tahun pembuatan: 2025, Tekanan: 315 t Jarak antar tiang: 3800 mm Langkah tetap: 35 mm Jumlah langkah: 100 - 250 langkah/menit Tinggi pemasangan (langkah + penyesuaian ram di atas): 560 mm Bukaan samping antar tiang: 600 mm Ukuran meja: 3700 x 1200 mm Lubang tembus di meja: 3400 x 450 mm Ukuran ram: 3700 x 800 mm Berat: 110,0 t Kebutuhan ruang (PxLxT): 6,1 x 2,65 x 5,6 m Ksdpfx Aasxcp Imo Nedg

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Kdodpfjmpfwdjx Aa Njg

Kondisi: baru, 1 Kdsdpfsh Ekucox Aa Nog

Kondisi: bekas, Tahun pembuatan: 1961, MTIzNDU2 Kedpouddnvofx Aa Njdg

Kondisi: bekas, Tahun pembuatan: 1977, EN: Chuck diameter 2,500 mm Ksdpfsuddpgex Aa Nodg Swing diameter 2,700 mm Turning height 2,000 mm Cross rail travel 1,500 mm Max. workpiece weight 20,000 kg Total power 71 kW Control system Siemens Sinumerik 840 Single-column vertical turning lathe 2,000 x 2,000 mm Retrofit: 1997 Max. turning diameter: 2,700 mm Max. distance from chuck to underside of tool holder: 2,150 mm Support swivels up to 30° Tool cross-section: 240 x 240 mm Smallest boring tool: 300 mm Special features: Profiling, taper turning, thread cutting, constant cutting speed

Kondisi: bekas, Pressure 45 t Outreach 230 mm Stroke 8–96 mm Total power requirement 4 hp Kodpfx Aswgi Rxsa Nedg

Kondisi: bekas, Tahun pembuatan: 1991, Pressing force / t Sheet thickness / mm Strokes / strokes/min Kedpfx Aaewgi S Ne Nodg Condition: used The punching machine operates flawlessly. A demonstration video is available.

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-01 Kdodpfjxmaqyox Aa Njg

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request. Kdedpfx Ajxwdygoa Nog

Kondisi: bekas, Tahun pembuatan: 2000, Chuck diameter 3,200 mm Swing diameter 3,500 mm Turning height 2,200 mm Dimensions (L x W x H) 7,730 x 6,240 x 6,700 mm Control type 840 D sl Voltage 3 x 400 V Frequency 50 Hz Speed 0.8 - 40 rpm Max. turning diameter 3,500 mm Total power requirement 51 kW Machine weight approx. 86 t Technical specifications Machine type: CNC vertical turning lathe Manufacturer: Rafamet Year of construction: 1973 (conventional) Completely overhauled and retrofitted with new control system 2010 Control system upgrade 2016 Control: Siemens 840 D Sl Condition: Very good Chuck Turning diameter of chuck: 3,200 mm Number of speed ranges for chuck: 3 (infinitely variable) Speed ranges for chuck: 0.8 - 40 rpm Level I: 0.8 – 3 rpm Level II: 0.8 – 11 rpm Level III: 0.8 – 40 rpm Workpiece machining Max. turning diameter: 3,500 mm Max. turning height above chuck: 2,200 mm Vertical saddles Minimum axis distance between vertical saddles: 470 mm Max. ram travel of left vertical saddle: 985 mm Max. ram travel of right vertical saddle: 985 mm Axis feeds – infinitely variable max.: X1,2 3 m/min max.: Z1,2 2.5 m/min Rams not swiveling Crossrail Rapid traverse of crossrail: 600 mm/min Max. distance between crossrail and chuck: 2,300 mm Load capacities +Permissible torque for turning workpieces with a diameter of 2,000 mm at 20 m/min: 8,000 kg +Maximum chip section for steel workpieces Fz = 50 kg/mm² at 20 m/min, for all saddles: 45 mm² +Maximum chip section for steel workpieces Fz = 50 kg/mm² at 20 m/min, for one vertical saddle at max. ram extension 985 mm: 2.5 mm² +Maximum chip section for cast iron workpieces HB = 160 kg/mm² at 20 m/min, for all saddles: 120 mm² +Maximum chip section for cast iron workpieces HB = 160 kg/mm² at 20 m/min, for one vertical saddle at max. ram extension 985 mm: 22.5 mm² +Maximum permissible workpiece weight at 0.8 - 3.15 rpm: 17,500 kg +Maximum permissible workpiece weight at 4 - 40 rpm: 7,500 kg Electric motors Power and speed of main drive motor: 51 kW Feed motor power: - Vertical saddle beams (2 units): 16 Nm (gearbox 1:10) - Rams (2 units): 16 Nm (gearbox 1:12) Power and speed of hydraulic pump drive motors (2 units): 3 kW - 1,500 rpm Power and speed of clamping hydraulic motor for vertical saddle beam: 1.5 kW - 1,500 rpm Power and speed for crossrail drive: 15 kW – 1,500 rpm Compressed air supply and other resources Compressed air connection: 6 bar, oil- and water-free Energy consumption, requirements Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto C6 holder Non-driven Kdjdpfx Aaeuddcgs Nog Faceplate Faceplate turning diameter: 3,200 mm Clamping plate diameter: 3,400 mm Number of faceplate speed ranges: 3 (infinitely variable)

Kondisi: bekas, Tahun pembuatan: 1980, SCHIESS-FRORIEP 40 DV carousel lathe Ksdsuddlzspfx Aa Nedg Turning diameter: 7,000 mm Faceplate diameter: 3,500 mm Workpiece height: 3,000 mm Faceplate height above floor: 160 mm Refurbishment: 1998 Control: Siemens 840 C Max. table load: 60,000 kg Electrical connection value: 400 V Serial number: 11 33 0051 Total power requirement: 71 kW Machine weight approx.: / t Space requirement approx.: 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical turning lathe manufactured in 1980. The machine was modernised and upgraded in 1998. Among other updates, a driven tool system (C-axis) was integrated. In addition, the control system was upgraded to a SIEMENS 840 C. The open-type large vertical lathes with traversing column, type DV, are particularly suitable for applications with frequently changing workpiece diameters and infrequent maximum dimensions. They require minimal space, offer universal applicability and deliver significant economic advantages—features that are often decisive factors. The robust steel construction, computer-optimised for maximum rigidity, characterises these modern designs. SCHIESS has made significant pioneering contributions in this area for the heavy-duty machine tool sector.