Beli Humidifier bekas (98)

Kondisi: baik (bekas), 0026-GNT-ITA-S1300-2-EN-DE-FR-ES Iijdpfovw Uf Dex Adqeh

Kondisi: sangat baik (bekas), Tunnel de refroidissement et de séchage Savy & Goiseau avec déshumidificateur Recusorb DR020, 220 V, 50 Hz, tapis en plastique, largeur de bande : 300 mm, dégagement utile : 320 mm x 80 mm, dimensions totales : 5300 mm x 960 mm x 1400 mm. Ijdpfxjtwdr Re Adqsih

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Heraeus Kendro HeraCell 150 CO2 Incubator Technically and optically as new: HeraCell 150 incubator Instead of the conventional water pan, the HERAcell features an innovative water reservoir. This design ensures high relative humidity (rH) and, above all, rapid humidity recovery times. Compared to traditional CO2 incubators equipped with water pans, the HERAcell achieves up to five times faster humidity recovery. Consistent humidity levels Ijdpfeiv S E Ujx Adqeih Quick humidity recovery is essential, especially when the incubator door is frequently opened or when small media volumes are processed. In models with water pans, the air layer between the bottom and the water pan increases humidity recovery times, resulting in higher evaporation rates within cultures. In contrast, the HERAcell's advanced technology ensures very short – up to five times faster – humidity recovery times by means of: • A large water surface (using the entire chamber floor) • Direct heat transfer from the heated chamber floor to the humidifying water • Patented floor heating, which activates after door openings and during O2 gassing Early water level alarm The water level is continuously monitored, with both acoustic and visual alarms providing timely notification when water needs to be refilled. ContraCon – Decontamination with moist heat at 90°C The specially developed and patented automatic ContraCon decontamination routine for Heraeus incubators has been independently tested and proven to completely eliminate a wide range of microorganisms, including mycoplasmas, at 90°C and high humidity.

Kondisi: bekas, jarak tempuh: 1.826 km, daya: 18 kW (24,47 hp), tipe perpindahan gigi: lain, jenis bahan bakar: diesel, warna: putih, berat keseluruhan: 2.665 kg, berat kosong: 2.520 kg, berat muatan maksimum: 145 kg, tinggi angkat: 2.000.000 mm, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, pendaftaran pertama: 04/2020, kelas emisi: Euro 6, lebar bucket penggalian: 1.200 mm, rem: lain, suspensi: lain, Tahun pembuatan: 2020, jam operasional: 1.350 h, tinggi total: 43.700 mm, kabin pengemudi: lain, kecepatan maksimum: 5 km/j, Perlengkapan: filter jelaga, kabin, lampu depan tambahan, pelindung kepala, penggerak semua roda, sistem immobilizer,

Kondisi: bekas, Spannung: 220 V - 50 Hz Leistung (Rücklaufleistung): bis zu 6/7 Liter/Stunde Wirkungsbereich: bis zu 1.200 m³ Ansaugluftvolumen: 800 m³/Stunde Leistungsaufnahme: 180 Watt, 260 VA Iodpfxjtvb I Uo Adqsih Defendor Modell 6200 Luftbefeuchter

Kondisi: bekas, jarak tempuh: 300.000 km, daya: 315 kW (428,28 hp), pendaftaran pertama: 04/2019, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, lebar ruang muat: 2.480 mm, panjang ruang muatan: 7.700 mm, tinggi ruang muatan: 2.300 mm, Perlengkapan: ABS, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi, tail lift,

Kondisi: bekas, CompAir Hersteller: CompAir Modell: Cyclon 111 Baujahr: 1999 Isdpowv Twhofx Adqjih Leistung: 13,59 kW 300-Liter-Druckluftbehälter Trockner

Kondisi: baru, Power 650 watts Tank capacity 5.5 l Length 515 mm Width 430 mm Height 825 mm Iodpfjqd Rxhsx Adqjih Machine weight approx. 36 kg Professional 650 watt construction dryer Recommended room size: 40 - 50 m², max. height 2.6 m Sound pressure level approx. 52 dB Dehumidification capacity 28 L/day - 51 L/day

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), de Iiodpfxjwzc S Ss Adqsh

Kondisi: baru, Tahun pembuatan: 2025, The most powerful centrifugal fan, the FAN5500, achieves an impressive air flow rate of 8,000 m³/h. The high negative pressure generated by the specially angled blade system and powerful motor can handle even the most demanding tasks. Thanks to the extensive experience of our CORMAK team, the FAN series of centrifugal fans has been developed. Designing an entirely new technological line enabled us to create the LineWind metal turbine system. This is the most critical feature of our centrifugal fans, as it allows for increased suction power to extract various types of contaminants, thanks to the specially engineered, angled blades. Isdpfx Aovughljdqsih The centrifugal fan has been designed for use in the woodworking, furniture manufacturing, automotive, agricultural, and production industries. Centrifugal fans are used for: transporting chips, sawdust, and small granules conveying dust-laden air local extraction systems drying systems dehumidifiers Multi-blade metal impeller! High efficiency ensured by a balanced rotor. Thermal overload protection of the winding (thermal sensor). The extraction system features additional anti-vibration feet at the base, ensuring stable and vibration-free operation. Emergency stop button compliant with PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded, flexible, and durable gaskets in critical locations, allowing for high suction with no leakage at connection points. Reliability confirmed by Polish users who enjoy daily use of our machines. Technical Specifications: MAX. AIR FLOW: 8,000 m³/h INLET DIAMETER: 300 mm OUTLET DIAMETER: 250 mm MOTOR ROTATION SPEED: 2,850 rpm DIMENSIONS (L x W x H): 670 x 600 x 600 mm MOTOR POWER / VOLTAGE: 5.5 kW / 400 V WEIGHT: 55 kg

Kondisi: bekas, Tahun pembuatan: 2004, Gebrauchte PET-Blasmaschine Siapi 2004 Typ EASP 20 – Italien Hierbei handelt es sich um eine vollständige Blasformmaschine, die in den letzten 3 Jahren nicht im Einsatz war. Blasleistung: 2.500 Flaschen/Stunde für 2-Liter-Flaschen Die Maschine verfügt über 2 Kavitäten, geeignet für Halsdurchmesser von 28–38 mm. Die Siapi Blasmaschine kann im Trockenlauf getestet werden. Gewicht: Blasmaschine 5.000 kg, Elevator 250 kg, Positionierer 250 kg Die vollständige technische Dokumentation für diese Maschine ist vorhanden. Iodpfx Aovgutaodqeih Erforderliche installierte Leistung: 120 kW Zusätzlich ist folgende Kompressoreinheit auf Anfrage erhältlich: Kompressor: Tempo Tehnika 350, Baujahr 2004 Technische Daten: 1.100 U/min, 75 kW, 42 bar Trockner: Bode du 37, Typ 309 – Baujahr 2006 Druckluftbehälter: 1.000 Liter Kompressorkühler: MTA RWD 150 – Baujahr 2004 Maschinenkühler: Euri Chiller GC – Baujahr 2004 Der Kompressor ist im Lieferumfang der Blasformmaschine enthalten oder kann separat erworben werden. Zusätzlich ist folgende Kompressoreinheit auf Anfrage verfügbar: Luftförderanlage etwa 100 m – Europool, Italien Für Flaschen mit 28 und 38 mm Halsdurchmesser geeignet. Diese vollständige Blasformanlage inklusive Kompressor und Luftförderer befindet sich in exzellentem Zustand.

Kondisi: baru, Tahun pembuatan: 2025, viber-air-specs Iijdpfxoxdbvro Adqoh

Kondisi: bekas, Tahun pembuatan: 2010, Pengering udara bertekanan dingin TA 5, dengan aliran volume hingga 0,60 m³/menit. Refrigeran: R134a Mesin (tambahan): Pengering udara terkompresi Aliran volume: 600 l/menit Ijdpew Tduwofx Adqoih Tekanan lebih: 16 bar Daya: 0,29 kW Arus: 2,0 A Tegangan: 230 V Frekuensi: 50 Hz Lokasi / posisi: berdiri bebas

Kondisi: hampir baru (bekas), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Device XENOTEST BETA+ – Material Testing / Weathering Test Device with Humidification and Spray System For sale is a professional XENOTEST BETA+ weathering tester manufactured by ATLAS Material Testing Technology GmbH. This unit is used to simulate sunlight as well as weather and climate influences, and is utilized worldwide in research, quality control, and material testing applications. Features: - Professional device for UV and weather resistance testing - Ideally suited for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Equipment: - Weathering and lightfastness tester equipped with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spray system (ultrasonic humidifier, spray bars) - Measurement system with XENOSENSIV sensor for irradiance and black standard temperature monitoring - Integrated touch display for operation and programming - Pre-programmed standard tests (e.g. ISO 11341, ISO 4892-2, ISO 105-B02/B06) as well as freely definable test programs - Integrated printer for documentation (paper roll) - Water reservoir (approx. 40 liters for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) For further questions, we are happy to assist you by phone. Iijdpfxsw Thyke Adqsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, KAESER M122 COMPRESSOR 9.5m³ 10BAR WITH DRYER!! KAESER M122 mobile compressor equipped with integrated air dryer (aftercooler), fully serviced. Technical specifications: Output: 9.50 m³/min; Working pressure: 10 Bar; Year of manufacture: 2008; Engine: DEUTZ; Operating hours: 2,715 h; The compressor is in full working order. Service support provided. A video link is provided below. Iodpfx Ajq Nz A Rjdqoih

Kondisi: baru, Tahun pembuatan: 2025, Radial fan enables operation with increased vacuum power, allowing for the extraction of various types of contaminants thanks to a special blade system profiled at an optimal angle. The radial fan is designed for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Thanks to the extensive experience of our CORMAK team, the FAN series of radial fans was developed. Designing a new technology line resulted in the creation of the LineWind metal turbine system. This is the most important feature of the radial fans, which allows for high-powered vacuum extraction of various contaminants due to the specially designed and profiled blades. The radial fan is intended for use in woodworking, furniture, automotive, agricultural, and manufacturing sectors. Radial fans are used for: conveying chips, sawdust, and fine granules handling dust-laden air localized extraction systems drying systems dehumidifiers Multi-blade metal impeller! Iisdpfxevugg Us Adqeh High efficiency guaranteed by a dynamically balanced rotor. Thermal overload protection of the windings (thermal sensor). The extraction unit features additional anti-vibration feet at the base, ensuring stable and vibration-free operation. An emergency stop button compliant with PN-EN ISO 12100 and PN-EN ISO 13850 safety standards. Another advantage is the use of branded, flexible, and durable gaskets in critical areas, which ensure high negative pressure without losses at connection points. Reliability is proven by Polish users who enjoy trouble-free operation with our machines on a daily basis. Technical parameters MAX. AIRFLOW CAPACITY 4000 m³/h INLET DIAMETER 200 mm OUTLET DIAMETER 180 mm MOTOR ROTATION SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2.2 kW / 400V WEIGHT 35.5 kg

Kondisi: baik (bekas), Large-capacity climatic test chamber with S!MCON control Construction The system consists of the following main assemblies: - Walk-in, insulated test chamber - Air handling module - Machinery unit Iedpfx Adew U Sv Esqoih - Climate control system - Control cabinet Test Chamber The installations within the test chamber are made of corrosion-resistant materials. The chamber is illuminated, walk-in, and features a condensate and cleaning drain. Air Handling Module Located behind the air deflection panel within the insulated room, the air handling module contains the assemblies required for temperature control and is accessible via easily removable panels. - Test chamber fans - Heat exchanger - Electric heaters - Air intake and exhaust facility - Temperature sensors In the air handling area, the air is conditioned (heating/cooling), humidified or dehumidified, and circulated by fans. Air is drawn in at ceiling height and discharged at floor level. Sensors Temperature and humidity sensors are located behind the air deflection panel in the air handling section. Machinery Unit The machinery unit, consisting of refrigeration compressors, supplies the air handling area with the necessary energy. Climate Control System The climate control system comprises: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time at chamber center: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climatic testing Temperature range: 10 to 95°C Humidity range: 10 to 95% r.h. Dew point range: 5 to 93°C Temperature fluctuation: +/- 5 K Humidity fluctuation: +/- 3 to +/- 5% r.h. Chilled Water Data Connections Supply: 2 x R 1 1/2 2" Return: 2 x R 1 1/2 2" Consumption at full load: max. 16 m³/h Maximum floor load for test chamber: 10,000 N/m² Rated voltage: 3/N / PE AC 400 V 50 Hz Rated power: 97 kW Rated current: 148 A Dimensions: Test chamber: Width 3.60 m Height 2.20 m Depth 5 m Climate chamber divided for transport to designated location (approx. 2.50 m). More items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: baru, Tahun pembuatan: 2025, viber-air-inv11-500-schraubenkompressor Iedpfxjxdbubj Adqeih

Kondisi: bekas, Tahun pembuatan: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer (19 steps), vector group YNyn0, equipped with conservator tank, Buchholz relay, air dryer, cooling fans, dial thermometer, year of manufacture 1978. Isdpfx Ajt Akl Hjdqeih

Kondisi: sangat baik (bekas), de-fi Iedpfxow Strcj Adqoih

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, KAESER TF 171 REFRIGERATION DRYER Iodpet Hdimofx Adqjih Capacity: 17 m³/min The dryer is fully operational.

Kondisi: baru, Tahun pembuatan: 2025, The fan is designed on the basis of a radial impeller blade system and is intended for operation with waste generated during woodworking processes. High negative pressure and powerful motor output ensure consistent suction performance. Thanks to the extensive experience of the CORMAK team, the FAN series of radial fans has been developed. The design of a new technological line made it possible to create the LineWind metal turbine system. This is the key feature of the radial fans, which, thanks to the specially angled blade system, enables efficient extraction of various types of contaminants with increased suction power. The radial fan is intended for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Radial fans are used for: - Transport of chips, sawdust, and small granulates - Dust-laden air - Local extraction points - Drying systems - Dehumidifiers Multi-blade metal impeller! High efficiency guaranteed by the balanced impeller. Thermal protection of the winding against overload (thermal sensor). The extraction system is equipped with additional anti-vibration mounts in the base, ensuring stable and vibration-free operation of the device. An emergency stop button, compliant with PN-EN ISO 12100 and PN-EN ISO 13850 standards, immediately shuts down the machine. An additional advantage is the use of branded, flexible, and durable seals in critical locations, allowing for high vacuum performance without losses at individual connection points. Reliability is confirmed by Polish users who rely on our machines in daily operations. Isdpjvuggbjfx Adqeih Technical specifications: MAX. AIRFLOW: 3,000 m³/h INLET DIAMETER: 150 mm OUTLET DIAMETER: 150 mm MOTOR SPEED: 2,850 rpm DIMENSIONS (LxWxH): 575 x 510 x 500 mm MOTOR POWER/VOLTAGE: 1.5 kW / 400 V WEIGHT: 32.5 kg

Kondisi: sangat baik (bekas), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine tank capacity: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Application areas: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW, Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Isdpfx Asw Hz Trsdqoih Standard climate (ventilated): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change. Errors and omissions excepted!) For further questions, feel free to contact us by phone.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, HANKINSON HHDP 1451 G REFRIGERATION DRYER (1) CAPACITY: 24 m3/min Iiodpfx Adsvk Nqboqsh Year of manufacture: 2014 The dryer is fully operational.

Kondisi: baru, Tahun pembuatan: 2025, Thanks to the extensive experience of the CORMAK team, the FAN series of centrifugal fans have been developed. The most powerful FAN7.5 centrifugal fan achieves an airflow capacity of up to 10,562 m³/h. This centrifugal fan is specifically designed for use in the woodworking, furniture, automotive, agricultural, and manufacturing industries. Product features: The centrifugal fan is capable of transporting air as well as chips, sawdust, dust, and other substances such as smoke or non-hazardous gases. It is widely used for ventilation in industrial facilities, sawmills, woodworking shops, mining operations, large buildings, hotels, restaurants, and more. Thanks to its design and a reinforced, balanced impeller with multiple blades, it ensures stable, quiet, and vibration-free operation. The high efficiency of the fan, achieved through the optimal shaping of the blades, significantly reduces energy consumption while maintaining high performance. Iijdpfxsvugrde Adqjh APPLICATIONS - Industrial production of various materials - Air transport for dehumidifiers and drying systems - Woodworking – transport of chips, sawdust, dust - Agricultural industry – transport of fine granules - Manufacturing – transport of polystyrene granules, etc. - Automotive industry – transport of dust-laden air, debris Technical specifications: MAX. AIRFLOW: max. 10,562 m³/h INLET DIAMETER: 340 mm OUTLET DIAMETER: 350 mm PRESSURE: 2,554 – 1,673 Pa DIMENSIONS: 810 x 900 x 980 mm MOTOR POWER / VOLTAGE: 7.5 kW WEIGHT: 125 kg