Beli Kabel Mesin Slot Unggul K 74 bekas (93.066)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, en-001 Djdpfx Aajvvtlgeyjwc

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Dwedpfx Aasfi Tkvsysc Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Kondisi: bekas, Shaping machine vise, vise for shaping machine Dodsb Uhq Sopfx Aayowc - Clamping width: 110 mm - Jaws: 225 x 45 mm - Dimensions: 270/330/H155 mm - Weight: 20 kg/unit

Tahun pembuatan: 2000, Kondisi: baik (bekas), 17 pieces of machine mounts Dwjdpfx Aasm Tr Hteyoc Type: K1 Load capacity per piece: 900 kg Dimensions: Length 200 mm, Width 100 mm, Height including washer 80 mm Thread: M16 In good condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 6.175 mm, lebar benda kerja (maks.): 1.550 mm, tinggi benda kerja (maks.): 300 mm, kecepatan spindel (maks.): 24.000 rpm, Provision: FCA – Lifting gear must be provided by the buyer – can be rented from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths with tool diameter 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Workpiece width, front: max. 1,150 mm (all units) Workpiece width, front with milling and tool Ø 25 mm: max. 1,220 mm Workpiece width, front when edging: max. 1,220 mm Workpiece width, rear: max. 1,400 mm (all units) Workpiece width, rear with milling and tool Ø 25 mm: max. 1,550 mm Workpiece width, rear when edging: max. 1,475 mm Workpiece width, rear with standard flush-milling and edging: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and Tool Changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Disc changer: 18-fold, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling Head Spindles: 30 (V20 / H10 / S360° "MPU") Drilling head motor: 2.7 kW, frequency controlled Speed: max. 7,500 rpm Vertical spindles: 20, high-speed, U-shaped layout (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs 32 mm pitch, 1 pair 320 mm spacing) Sawing and Milling Grooving and dividing saw: Saw blade Ø max. 200 mm Add-on milling spindle for drilling head: 6 kW (at S6 operation) FLEX-5 FLEX-5 saw, milling, drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Edgebanding Unit Edgebanding unit POWER EDGE: For edgebanding of straight workpiece edges Edge height: max. 105 mm (edgebanding unit BAZ222/322) Workpiece thickness when edgebanding: max. 100 mm Dwedpfou Sz Nyox Aayjc Other Units Flush milling unit: for tool changer Combined flush-milling and scraper unit: WD 100 mm Combined cross-cut and corner rounding unit: sensor-guided Lock case milling unit: 2 spindles, D = 16/20 mm EQUIPMENT - with edgebanding unit - with FLEX-5 unit - Chip conveyor: for B200/52-72 - LED position indicator: console 1,300–1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece machining options due to flexible unit system - without tools The technical data and descriptions are taken from the transcript of the original order confirmation. Data is provided for information only and is not binding.

Kondisi: bekas, Plant: Chamber filter press, used Type: Netzsch Filter plate size: 1200x1200 mm Number of plates: 74 pieces Filter plates: PP (polypropylene) Filter cloths: optionally available, tailored to the medium Filter area: approx. 204 m² Press volume: approx. 2719 dm³ Filtration pressure: approx. 15 bar Pump technology: optional Dimensions: L 8933 x W 2240 x H 1900 mm Dsdpfxjt Ay Svj Aayowc Purchase or rental: Inspection of the plant possible by appointment at our site.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 520-003956, Lisec afstandhouderbuigmachine Printer voor afstandhouders niet beschikbaar Dwodjvktytopfx Aayoc

Kondisi: sangat baik (bekas), Double-sided edge banding and formatting machines – First (1st) machine in the line Edge thickness in rolls (min/max) mm Edge thickness in strips/bands (min/max) mm Panel thickness (min/max) mm 12 - 60 Dwjdpfxofi Tkge Aayoc Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (Master & Slave systems) Top pressure driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and formed edges (softforming) mm 1,050 Edge magazine for rolls (magazine slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Flat scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)

Kondisi: bekas, Tahun pembuatan: 1990, en-001 Djdpju Iwyvsfx Aayewc

Kondisi: sangat baik (bekas), 4-axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. Swan-neck machine – safety tread mats in front CNC control system Type PowerControl PC 85 (Software: WoodWop) 10 supports/consoles (1340 mm) LEDs indicate the programmed vacuum pod positions (Y-axis) Automatic tool change system (rotary changer, 18 positions) Usable working area (X - Y - Z): 6175 x 1550 x 60 mm Usable working area for edge banding (X - Y - Z): 6000 x 1475 x 60 mm 2 working zones – 2 vacuum pumps (capacity: 100 m³/h) Chip conveyor for efficient waste removal from the working process Total connected load: 27 kW Working units (top) - 17 independent vertical drilling spindles (2.2 kW) - 4 independent horizontal drilling spindles Dwjdpfxeh Ucn Rj Aaysc - 1 vertical electrospindle HSK F63 (main spindle 11 kW) - 1 grooving saw aggregate (0°-90°), diameter 125 mm Edge banding unit: Power Edge (Y-axis), glue application aggregate (hot-melt glue + pre-melter) Edging material (rolls) thickness (min/max): 0.4 – 3 mm Edge roll magazine (2 positions)

Kondisi: siap digunakan (bekas), Mesin Penarik Kabel, Mesin Gulung Kabel, Mesin Pengurai Kabel, Ramatech ABW 800/300 Dsdexl R Duopfx Aayswc Mesin penarik kabel, mesin pengurai kabel, Ramatech ABW 800/300, mesin bekas Produsen: Ramatech Tipe: ABW 800/300 Dimensi keseluruhan: Lebar: 2270 mm Kedalaman: 1120 mm Tinggi: 2550 mm Spesifikasi teknis: Diameter maksimum drum kabel: 800 mm Lebar maksimum drum kabel: sekitar 650 mm Kapasitas beban drum kabel: 300 kg Catu daya: 3 × 400 V AC + konduktor netral Arah operasi: kiri ke kanan

Kondisi: baik (bekas), 0030 Marca: MARZANI Modelo: RE/2 Máquina automática para ranurado de persianas de ventana Datos técnicos Dwjdpfx Aaevyy Uisyec Acoplamiento del husillo: 10 mm Rotación de la fresa: 10.000 rpm Posibilidad de mecanizar dos montantes simultáneamente Ejecución de varios intervalos de corte Motor principal: 2 Hp Inclinación de la unidad de trabajo Ajuste de bajada de fresas Ajuste de avance Omisión de ranura Aire comprimido: 6-7 bar Dimensiones totales: 1450 x 950 x 1400 mm (alto) Peso: 440 kg

Kondisi: baik (bekas), daya: 82 kW (111,49 hp), jenis bahan bakar: diesel, warna: kuning, Tahun pembuatan: 2016, jam operasional: 3.240 h, Perlengkapan: pendingin udara, 202172 Dwjdpfx Aaow Uk Tieyjc

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system – no more laborious hand cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Lateral and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable via scale and stop - Drilling head height adjustment can be fully used for vertical slotting - Large-dimensioned cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Drilling width: 340 mm Height adjustment: 145 mm Drill head swivels: -60° to +60° Drill table size: 595 × 315 mm Dedpfx Asxllwcoayjwc Table extension: 2 × 200 × 220 mm Table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short notice Location: Flörsheim

Kondisi: sangat baik (bekas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in strips (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Dsdpfjxlqntjx Aayswc Pressure belt driven (C.N.) Spraying unit (for liquid anti-adhesive) AAR Adjustable stop ruler, C.N. controlled "EASY SIZE PLUS" Jointing unit 2 x Kw Radiator for edge warming Gluing unit (P.U.R. glue + pre-melter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (C.N.-controlled) Edge magazine for rolls - 1 Cut-off unit K/SEL Pre-milling unit RS/K Milling unit RI/800 (3 pos.) Multi-function unit (radius and profile milling unit) "4 EDGE" KIT Spraying units (for sliding fluid) Profile scraper unit RAS/1000 Flat scraper unit RCA/2C Universal milling unit for grooving/rebating and profiling K-100 (1 x Kw 1.8) 90° Hot air radiator - edge trimmer Return direction "SAG" Mod. SPINNER 47 / 63

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1986, panjang penggilingan: 800 mm, lebar penggilingan: 600 mm, kecepatan spindel (maks.): 1.400 rpm, berat keseluruhan: 5.400 kg, daya motor spindle penggiling: 11 W, kecepatan spindle penggilingan: 1.400 rpm, produsen pengendali: SIEMENS, model controller: S7 300, daya motor spindle: 11 W, OHJAUS .. SPC-ohjaus SIEMENS S7 300 TYÖALUE - TASOHIONTA - .. Hiontapituus: 800 mm .. Hiontaleveys: 600 mm Dsdpfx Aasxlh H Teyewc .. Pystysuuntainen liike: 400 mm PÖYTÄ - TASOHIONTA - .. Kiinnityspinta-ala (vasen-oikea): 1300 mm .. Kiinnityspinta-ala (etu-taka): 550 mm .. Työkappaleen maksimipaino: 700 kg .. Magneettilevy: kyllä MAGNEETTILEVY .. Pituus: 800 mm .. Leveys: 500 mm HIOMAKARASTO .. Kierrosnopeus max: 1400 /min .. Käyttöteho: 11 kW HIOMARUNKO .. Hiomapyörän tyyppi: Levy .. Halkaisija (max): 400 mm .. Kara: Halkaisija: 127 mm .. Leveys: 100 mm AKSELIEN KÄYTTÖ HIONNASSA .. Syöttö X-akselilla alkaen: 1 mm/min .. Syöttö X-akselilla enintään: 30 mm/min MANUAALINEN MUOTOHIOMALAITE .. Muotoilutyökalu: Yksirakeinen timantti .. Toimintatapa: katkonainen MITAT / PAINOT .. Kokonaispaino n.: 5400 kg LISÄVARUSTEET (HIONTA) .. Jäähdytysnestelaitteisto: kyllä

Kondisi: bekas, daya: 93 kW (126,44 hp), jenis bahan bakar: diesel, Tahun pembuatan: 2008, jam operasional: 15.736 h, Berat kosong: 12.611 kg Dodpfxsxmhwhj Aayjwc

Kondisi: bekas, Tahun pembuatan: 1998, de-hu-001 Dwedow Uir Dspfx Aaysc

Kondisi: baik (bekas), daya: 69 kW (93,81 hp), jenis bahan bakar: diesel, warna: kuning, Tahun pembuatan: 2018, jam operasional: 6.384 h, de-to-hu-it-lt-lv-nb-nl-pl Dodpfxoxlkyie Aayowc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 100 h, de Dwsdpfjxiv Dusx Aaysc

Kondisi: baru, de Djdpfxjpbv Tfe Aayowc

Kondisi: baik (bekas), Tahun pembuatan: 1986, nomor mesin/kendaraan: 118, Jarak antara pusat: 3300 mm Diameter penggerindaan: 860 mm Dodow Ntcvspfx Aayowc

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, • Alcolor dampening • Autoplate • Pencuci otomatis Djdpfxjxl A Hzj Aayewc • CP TRONIC • Register kanan-kiri-diagonal • Lurus • Tahun 1995 • 44 juta cetakan • Dalam produksi • Yunani

Kondisi: bekas, nomor mesin/kendaraan: 13063, Rotor diameter: 350 mm Dodpswbwuhsfx Aayewc Rotor width: 1200 mm Rotor knives: 66 Stator knives: 1 row Infeed opening approx. 1100 x 1200 mm Drive motor: 55 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 230 h, 8 warna Perfector 4/4 Format minimum pencetakan lurus: 21 x 28 cm Format minimum mode perfector: 30 x 28 cm Format maksimum: 53 x 74 cm Format cetak maksimum: 51 x 74 cm Ketebalan: 0,03 - 0,6 mm 230 juta cetakan CP 2000 Alcolor Vario Autoplate Perangkat kombinasi sirkulasi dan pendinginan pelembapan Kontrol suhu tinta dengan pendinginan udara Dwedjxlm S Iepfx Aayec Perangkat cuci unit tinta Technotrans Perangkat cuci silinder blanket Silinder blanket berlapis krom PerfectJacket Pengantaran tumpukan tinggi Perangkat antistatik Eltex