Beli Kaltenbach Kks 370 bekas (122)

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, 1 Pedpfx Ajy H D Raol Iegk

Kondisi: bekas, Tahun pembuatan: 2007, 1 unit gergaji mitre KALTENBACH TL450 dengan 2 unit konveyor rol, masing-masing sekitar 200x47x120 cm. Warna: sesuai gambar, berdasarkan foto dan inspeksi. Tahun pembuatan: 2007. Kondisi: bekas pakai. Lokasi barang: gudang Pgjdpfxey D Ncio Al Iok Metode pembayaran: pembayaran di muka melalui transfer bank Pengiriman: hanya pengambilan sendiri di lokasi Ditzingen-Heimerdingen.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 117004, panjang total: 7.500 mm, lebar total: 1.200 mm, tinggi total: 2.000 mm, berat keseluruhan: 2.500 kg, KALTENBACH SKL 400 H Cold Circular Saw (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontally 45°: 220 x 60 mm - Profiles vertically 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1,750/3,500 m/min - Saw blade feed: 0 - 3,700 mm/min - Saw blade rapid return: 4,500 mm/min Additional equipment: - Workpiece clamping with short-stroke vice: stroke 8 mm - with hand crank for pre-setting - Machine overhauled and newly painted - Front horizontal clamping cylinder per piece - Minimal lubrication in place of coolant mist spraying system - Infeed roller conveyor T3 with rollers 60 x 289 mm - one lead-in section: 2,000 mm, with 5 rollers, one stand, one mounting bracket - one extension section: 2,000 mm, with 4 rollers, one stand, one stop roller, adjustable as a guide for material bars - Length measuring device including outfeed roller conveyor T3 Podpfx Aljy Dcu Es Ijgk Note: The item must be collected on an agreed date between 07 and 09 July 2026, binding collection required. FCA D-71263 Weil der Stadt – loaded onto truck

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 313026, diameter mata gergaji: 450 mm, panjang total: 10.000 mm, tinggi total: 2.000 mm, lebar total: 1.200 mm, berat keseluruhan: 2.000 kg, KALTENBACH SKL 450 H Gergaji Lingkar Dingin Semi-Otomatis - Tegangan operasi: 3 x 400 V - Frekuensi: 50 Hz Pgsdpsy Dcr Dofx Al Iek - termasuk konveyor rol Perhatian: Barang harus diambil secara wajib antara 07 dan 09.07.2026 pada tanggal yang masih harus disepakati. FCA D-71263 Weil der Stadt – dimuat di truk

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119349, diameter mata gergaji: 450 mm, panjang total: 12.000 mm, tinggi total: 2.000 mm, lebar total: 1.200 mm, berat keseluruhan: 1.500 kg, KALTENBACH SKL 450 H Mesin Pemotong Lingkaran Dingin (sudah direkondisi) - Diameter pisau: 400/450 mm - Dudukan pisau: 50/4 x 14/80 - Kapasitas benda bulat 90°: 135/160 mm - Kapasitas benda persegi 90°: 125/145 mm - Profil 90°: 300 x 40 mm / 320 x 50 mm - Profil rebah 45°: 220 x 60 mm / 250 x 40 mm - Profil berdiri 45°: 60 x 130 mm / 100 x 150 mm - Motor pemotong: 3,7/4,7 kW - Kecepatan potong: 1950/3900 m/menit - Roller table masuk T3, roller table keluar T3 dengan alat ukur panjang L45E, satu bagian awal: 2000 mm, sistem penjepit horizontal SKL 450 Perhatian: mesin sudah direkondisi! Pgsdpoy Dcrwjfx Al Ijk Perhatian: barang harus diambil pada tanggal pasti antara 07 dan 09.07.2026, sesuai kesepakatan. FCA D-71263 Weil der Stadt – dimuat di atas truk

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MV-117894/D, diameter mata gergaji: 400 mm, panjang total: 8.000 mm, tinggi total: 1.900 mm, lebar total: 1.000 mm, berat keseluruhan: 1.000 kg, 1 Pedpfx Asy Dcqysl Ijgk

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: 119305, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 300 mm, lebar pemotongan (maks.): 360 mm, tinggi meja: 300 mm, Dilengkapi dengan: - gergaji potong - setengah otomatis - conveyor roller sekitar 12 meter - buku petunjuk penggunaan Pgsdpsy Enuyofx Al Iok Penjualan sementara dan kesalahan dapat terjadi.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: tidak berfungsi, Vertical drilling machine with automatic feed gripper system for material positioning. WITHOUT control unit and therefore not operational. Control cabinet is present but partially incomplete. Operating manual and wiring diagrams are available. WORKING RANGE: Round stock: 20 mm – 150 mm Square stock: 20 mm – 140 mm Flat stock (width): 20 mm – 240 mm Pjdpfoy At Iysx Al Ijgk Flat stock (height): 5 mm – 140 mm DRILLING UNIT: Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drill bits only Spindle speeds: 380 rpm – 1,600 rpm Rapid advance/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER: Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE: Quick-change tool holder: MK3 WORKPIECE CLAMPING: Horizontal: max. 5.6 kN FEED GRIPPER: Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION: Approx. 300 l/min MACHINE DIMENSIONS: (L x W x H) approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT: Above floor: 1,040 mm WEIGHT: Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION: Customer side (for air cooling unit): 6 – 8 bar

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 300 mm, lebar pemotongan (maks.): 360 mm, berat keseluruhan: 780 kg, tinggi meja: 300 mm, Rentang pemotongan baja bulat pada 45°: 265 mm, Rentang pemotongan baja bulat pada 90°: 303 mm, kecepatan pemotongan: 90 mm/menit, SAAE-21001 Pgedjyac Uispfx Al Iok

Kondisi: baik (bekas), Tahun pembuatan: 2000, Kapasitas potong pada 90 derajat: Bulat: Ø303 mm Psdpsw Rz Shjfx Al Iogk Persegi PxT: 360 x 305 mm Kapasitas potong pada 45 derajat: Bulat: Ø265 mm Persegi PxT: 265 x 300 mm Kapasitas potong pada 30 derajat: Bulat: Ø175 mm Persegi PxT: 175 x 300 mm

Kondisi: sangat baik (bekas), Dijual: motor listrik dari Kaltenbach Maschinenfabrik Harga untuk 1 unit Kondisi bekas, berfungsi dengan baik Motor telah diuji dengan alat ukur Terlihat bekas pemakaian dan penyimpanan yang wajar Pgjdpfxsyv Uvxo Al Ijk Spesifikasi teknis Produsen: Kaltenbach Maschinenfabrik Tipe: DKV 112M 238 4 Motor tiga fasa Daya: 1,7 / 2,6 kW Tegangan: 400 V 50 Hz Tingkat perlindungan: IP54 Kelas isolasi: F Putaran 700 / 1415 rpm Motor multikecepatan Dahlander Diameter poros sekitar 28 mm

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of manufacture 1999 General Information: Manufacturer: Kaltenbach Machine type: Automatic saw and drill line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: used, operational Location: Germany Availability: Dismantling from mid/end March 2026 Inspection: The machine is in operation and can be inspected under power Sale: without warranty or guarantee Machine Description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including comprehensive infeed and outfeed roller conveyors, as well as cross conveyors. The system is currently in full operation and has been reliably used in steel fabrication until recently. It is ideally suited for efficient processing of beams and profiles in both series and project production. Typical Fields of Application: - Steel construction / industrial/commercial building construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN etc.) - Batch, series and one-off production Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cuts: swivel left and right +45° / –45° - CNC-controlled length positioning - Automatic sawing operation Drilling machine APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile machining via drilling portal - Suitable for web and flange processing Roller Conveyors & Transport Systems: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross conveyor: approx. 4,000 mm - Outfeed cross conveyor: approx. 4,000 mm Condition: - Complete and fully functional line - Currently in operation - Age- and usage-related wear and tear - Sale in as-is condition Psdpfxjyak Ane Al Iogk - No warranty or guarantee Scope of supply: - Bandsaw KBS 851 DGNC - Drilling machine APS 1003 - Infeed and outfeed roller conveyors - Cross conveyors at infeed and outfeed - Control cabinet / operator panel - Existing safety and protective devices - Documentation (where available) Dismantling & Loading: - Dismantling by the buyer - Dismantling possible from end of March 2026 - On-site resources available: * Forklift * 2 gantry cranes, 5 t lifting capacity each - Good access and loading conditions

Tahun pembuatan: 1971, Kondisi: bekas, nomor mesin/kendaraan: 23964, Saw blade diameter: 370 mm Cutting range at 90°: 115 mm Cutting range at 45°: 115 mm Drive motor: 380 V, 4/5 kW Space requirements: 1000 x 1200/2200 x 1500 mm Weight: approx. 900 kg Pjdpfjcu Dvujx Al Isgk

Kondisi: baik (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, Mesin gergaji lingkar dingin dengan otomatis pengumpan Tahun pembuatan: sekitar 1976 Perlengkapan: - Perlengkapan standar Pgjdpfxjwtdi Ao Al Ijk - Otomatis pengumpan, panjang potongan 1700 mm - Berbagai pisau gergaji - Perangkat pendingin - Konveyor rol masukan 2400 mm, terbagi (2x1200 mm) - Konveyor rol keluar 500 mm - Dokumentasi Kondisi: baik, telah diperiksa di bengkel

Kondisi: bekas, nomor mesin/kendaraan: 8354, Saw blade Ø: 350 mm Cutting capacity at 90° round: 90 mm Cutting capacity at 90° rectangular: 160 x 70 mm Cutting capacity at 45° mitre, rectangular: 120 x 60 / 60 x 80 mm Psdpfxeby Hiko Al Isgk Cutting speed: 30 m/min Drive motor: 1.1 kW Space requirement: 1000 x 1250 x 1380 mm

Kondisi: bekas, Tahun pembuatan: 1988, Diameter mata gergaji: 400 mm Area pemotongan bulat: 130 mm Persegi panjang: 305 x 40 mm Pada pemotongan sudut 45° bulat: 130 mm Persegi panjang: 40 mm Kecepatan pemotongan: 10 m/menit Pgsdpsw Tk Ecofx Al Ijk Kecepatan umpan hidrolik dapat diatur tanpa tahapan: 0 - 1000 mm/menit Penggerak gergaji: 380 V, 1,7 kW Berat sekitar: 700 kg Kebutuhan ruang tanpa meja rol: 1100 x 1000 x 1900 mm

Kondisi: bekas, Tahun pembuatan: 1992, Sägeblattdurchmesser-450-mm Pgjdsyv N Najpfx Al Iok

Kondisi: baik (bekas), diameter mata gergaji: 400 mm, – Double mitre – Minimum quantity lubrication system (MQL) – Protective cap – 400V Psdpfjim Ezgox Al Iegk

Kondisi: bekas, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity Round Ø 380 mm Square 380 x 380 mm Bandsaw blade dimensions 5650 x 34 x 1.1 mm Blade speed 25-108 m/min, stepless adjustment Material feed height 870 mm Hydraulic power rating 1.5 kW Pedpfx Alodzqtgj Iogk Saw motor power rating 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic bandsaw with double-column design - Hydraulic saw bow lowering with stepless adjustable cutting pressure - Steplessly adjustable lowering speed - Hydraulic vising with hydraulic top bundle clamping - Hydraulic unit integrated in the machine base - Material infeed roller on entry side with geared motor (not mounted on machine frame) - Coolant system with emulsion pump - Minimal quantity lubrication for saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop length 6750 mm, stop travel 5650 mm, stop arm hydraulically liftable without roller conveyor Space requirement of base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Pgodpfx Aohzbipol Iek Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, lebar total: 1.450 mm, tinggi total: 1.900 mm, berat keseluruhan: 1.500 kg, panjang produk (maks.): 2.700 mm, Metal circular saw from 2004. The KALTENBACH SKL450NA features a blade diameter of 450 mm and a cutting capacity of 150 mm for round material. Weighing approximately 1.5 tons, it comes equipped with a loading magazine for increased efficiency. If you are looking for a high-quality saw, the KALTENBACH SKL450NA is a strong option, currently offered for sale. Contact us for further details. • Total installation length (foundation plan): 3,226 mm • Saw blade diameter: 450 mm • Saw blade type: Carbide-tipped / HSS (DIN 8576) • Saw blade bore: 50 mm • Number of mounting bolts: 4 • Bolt circle: 80 mm • Mounting bolt diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed rate: 0-3,500 mm/min • Rapid return: 4,500 mm/min • Cutting speed (with 400 mm blade): 1,950 / 3,900 m/min • Material feed rate: 10 m/min (optional: 10 / 20 m/min) • Adjustable cutting lengths: 10-1,000 / 2,000 mm Pjdpfx Alsykqrwe Iogk • Mitre adjustment: stepless ±90° (manual) • Motor power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6-8 bar • Control system: Kaltenbach PLC • Lubrication: micro-spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Tahun pembuatan: 2009, Kondisi: bekas, nomor mesin/kendaraan: 0301-260004, Kaltenbach mesin potong-bor CNC sebagai kombinasi antara bandsaw sudut ganda dengan mesin bor 3-sumbu dan sistem transportasi untuk perpindahan material Podpfx Aloymy Imo Iogk

Kondisi: sangat baik (bekas), Kondisi: sangat baik, barang tampak hampir tidak terpakai Lebar rol: 350 mm Tinggi dapat diatur dari 650 mm hingga 950 mm Pgedeyuudlepfx Al Ijk Harga untuk 3 unit: 375,-- netto

Kondisi: bekas, Tahun pembuatan: 2003, Schnittdurchmesser-500mm-block1 Podpfx Aleyutwqe Iegk

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: belum diuji, en-fi-machinery Psdpfx Aoyrgrpjl Iogk