Beli Wkz bekas (14)

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 53.776 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 380 mm, diameter meja putar: 500 mm, kecepatan rotasi (maks.): 18.000 rpm, For sale: Deckel Maho DMU 50 eVolution 5-axis simultaneous milling machine The machine is in good condition and immediately ready for operation. Technical Data: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0–180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 × 2,400 × 2,500 mm Weight: 5,500 kg Transport and loading can be organized Europe-wide upon request and at additional cost. All prices plus VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machines Purchase / Sales Gusdpswxd Agjfx Adqjh BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact options, please visit our website.

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 39.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 420 mm, jarak gerak sumbu Z: 380 mm, model controller: Heidenhain Mill Plus IT, tinggi total: 5.600 mm, panjang total: 9.000 mm, berat keseluruhan: 6.000 kg, For sale is a 5-axis machining centre of the DMU brand, model 50 eVolution. Of particular note is the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. Gedpfjtyit Ejx Adqeuh The machine is in good condition and fully operational. Technical data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx. 500 mm diameter Travel range: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirement as per drawing: 9,000 x 5,600 mm Transport dimensions: 2,800 x 3,700 x 2,800 mm Weight: 6,000 kg Upon request, transport and loading can be organised throughout Europe for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Fzho0bc Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to contact us, please visit our website.

Kondisi: bekas, Tahun pembuatan: 1999, jam operasional: 54.418 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 710 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 520 mm, kecepatan rotasi (maks.): 18.000 rpm, For sale is a 5-axis CNC machining center, brand DMU, model 70 V. The machine is fully functional and ready for immediate operation. Gsdpfx Ajuu Hlmsdqjuh Technical Data: Year of manufacture: 1999 Travel X: 710 mm Travel Y: 520 mm Travel Z: 520 mm Control: Heidenhain TNC 426 Operating hours: 54,418 h Program run time: 17,396 h Tool changer: 60 stations Tool holder: HSK 63 Spindle speed: 18,000 rpm Included in the offer: Chip conveyor 3D probe Belt filter High-pressure coolant system (IKZ Anlage) Hexagon tool measurement system (installed) Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase/Sale BUYING/SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or do you wish to sell yours? For further information or contact options, please visit our website.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We kindly invite you to visit our technical center to personally experience the quality and functionality of our equipment. Material Shredder 45 kW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shutdown in idle mode - Hydraulic pusher equipped with pressure plates - Siemens PLC control system - Optional: control cabinet extension for discharge conveyor belt + overband magnet separator Complete solution with discharge conveyor in any desired configuration. Our core competence is providing our customers with exactly what they need. We work together with our customers to develop tailored, application-specific solutions and supply systems produced in-house. Feel free to contact us by phone to find the right solution for your requirements. Guodsv Tdq Ijpfx Adqoh Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT. All information provided without guarantee, while stocks last!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 10,2 kW (13,87 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, suhu lingkungan (maks.): 50 °C, Perlengkapan: Pelat tipe tersedia, Eckert cooling unit Godpfx Adew Drbuoqsuh Performance details and operating parameters can be taken from the photo of the nameplate. The unit was originally purchased to cool a wire EDM machine and was in full operation for one to two years, then used only sporadically. We are selling the unit as we have switched to central cooling and therefore no longer require this cooling device.

Kondisi: baru, max. workpiece length 3200,5100 mm Milling spindle 1 unit Main motor 12 kW Controller Beckhoff CNC Number of axes 5 pcs. Masterwood Project 385 CNC Machining Center ----- 5-axis CNC machining center in gantry design for applications including arched windows, doors, curtain walls, interior fittings, staircases Brief overview: ----- Working area: X = 3200 mm (optionally 5100 mm); Y = 1500 mm; Z = 200 mm 1 pc. 5-axis high-performance spindle, 12 kW, HSK 63 F tool holder 1 pc. fixed drilling head with 19 spindles with 7 individually selectable vertical drilling spindles in X-axis with 6 individually selectable vertical drilling spindles in Y-axis with 2 double horizontal drilling spindles in X-axis and 1 double horizontal drilling spindle in Y-axis Sawing unit integrated into drilling head 27 tool change positions: Carousel tool changer with 22 spaces and 102 mm pitch Linear 5-position tool magazine for large diameter tools Console table with 6 cross beams Workpiece lifting device 6 pcs. special clamps for round window and door components 24 pcs. vacuum clamps for panels and interior fittings 1 pc. vacuum pump 100 m³/h 1 pc. chip conveyor 1 pc. remote control Masterwork CAD/CAM software: 2D-Wop for standard applications in panel processing/interior fittings, arched frames, doors Master 3D Level 2: for more complex machining operations, optionally upgradeable for full 5-axis interpolation Gsdsd N Rt Topfx Adqsuh Freight and installation within Germany Technology and services according to the attached detailed description ----- Total price for this configuration: on request! ----- Options with surcharge: ----- Working length 5,100 mm instead of 3,200 mm, including increased number of consoles and clamping devices Surcharge: €7,500 plus VAT Additional carousel tool changer with 16 spaces and 102 mm pitch Surcharge: €6,500 plus VAT For detailed description see attached PDF. More options available on request! (Technical data as per manufacturer – subject to confirmation!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194573, gaya penjepit: 1.000 kN, Here we offer a well-maintained injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2005 onwards as part exchange. Please offer us any machines that will become available from your operations. Important notice – Tax information and benefit for used machines From 01.07.2025, used machines are also eligible for a special depreciation of 30% per annum. In addition to the lower purchase price compared to a new machine, you can benefit from the same depreciation rates as with new equipment. Reference: Growth Booster, (§ 7 Paragraph 2 EStG-E) Arburg 2-colour injection moulding machine with complete maintenance history, featuring both horizontal and vertical injection units. Machine No.: 194573 Arburg 420C 1000-150/150 Year of manufacture: 2004 Control system: Selogica Extras: - 2x core pull (simultaneous movement, adjustable holding pressure) - Intermediate stop for hydraulic rotary control - CF card drive - Interface for production control - Interface for dosing unit - Interface for conveyor belt - Prepared for Multilift - Selector unit with connection - Extended installation height to 350 mm - Highly wear-resistant screws - Air blow-off device connection - 2-colour / horizontal & vertical unit - Including disks/CF cards - complete documentation/manuals Clamping force: 100 tons / 1000 kN Tie bar spacing: 420 x 420 mm Mould plates: 570 x 570 mm Opening stroke: 500 mm Max. daylight: 850 mm Mould height: 350 mm 1st Injection unit (150) Screw: 30 mm (highly wear-resistant) Shot weight: 65 g Shot volume: 78 ccm Injection pressure: 2210 bar 2nd Injection unit (150) Screw: 25 mm (highly wear-resistant) Shot weight: 45 g Shot volume: 54 ccm Injection pressure: 2500 bar Weight/Dimensions Dimensions: 4.63 x 1.3 x 3.9 m (L x W x H) Weight: 4,000 kg Connected load: 125 A pre-fuse Delivery free to buyer’s business address up to the yard – Unloading is the buyer’s responsibility & risk from the truck loading area. The machine is offered fully tested and functional. Godpehyumgofx Adqouh For your information about us and the machines on offer: - We only sell machines that we have purchased ourselves directly from running production, from our warehouse in Hannover - All machines undergo inspection and testing prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from successful businesses where maintenance and care are a standard practice - All machines offered are available for inspection at our warehouse

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, with 8 pallets Control: Fanuc M-Pro1 (0i-MF Plus) Travel paths X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size: 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Number of magazine stations: 220 Max. tool diameter: Ø95 mm Max. tool diameter with adjacent positions empty: Ø185 mm Max. tool length: 400 mm Max. tool weight: 8 kg Guedpfx Adsuafl Ijqoh Spindle taper: BBT40 Big Plus™ Speed: 15,000 rpm Chip conveyors on both right and left sides in the machine Coolant through the spindle Dual chip conveyor Full-featured 4th axis from PARKSON 50 kVA transformer

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, For sale is a 3-axis CNC machining center from Ingersoll, model OPS 800. This machine is particularly suited for the production of graphite electrodes due to its high-speed spindle. The machine is fully operational and immediately available for use. Technical specifications: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control unit: ANDRON Spindle speed: 42,000 rpm Tool changer: 36-position Tool holder: HSK 63 Including: - Graphite extraction system - Chip trays - Cooling system Guedouu Rthepfx Adqjh *Cutting tools not included* On request, transport and loading can be organized across Europe for an additional charge. All prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team looks forward to assisting you. Trade-in or exchange is possible! Machinery buy & sell PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 650W500V/200HL. 2F 2-component machine  Tie-barless design Gusdpfx Aegrafvedqsh  2000 kN clamping force  Screw diameter unit 1: 45 mm, unit 2: 45 mm  Max. shot volume unit 1: 226 cm³, unit 2: 183 cm³  Mold installation height: min. 250 mm, max. 750 mm  Year of manufacture: 1998

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 630 mm, jarak gerak sumbu Z: 700 mm, lebar meja: 650 mm, panjang meja: 4.150 mm, Hedelius BC 60-2500 Very good condition Major Hedelius service performed in 08/23 Upgraded to Siemens 840D B-axis SK40 / 40 tools Immediately available For technical data, see images Guedpfx Ajwixm Uodqeh

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Throat Depth: 510 mm Working Pressure: 250 bar Gedpfx Adou Ick Toqsuh Punching Force: 1000 kN t Round Steel: up to Ø 65 x 12 and up to Ø 90 x 8.5 mm Electrical Connection Value: 400V / 50Hz Total Power Requirement: 7.5 kW Machine Weight approx.: total 2.6 t Machine Dimensions (LxWxH) approx.: 1.9 x 1.0 x 2.1 m Dimensions L x W x H: Tool Cabinet: 0.7 x 0.35 x 0.9 m Heavy-duty, robust electro-hydraulic punching machine with large throat depth -Punching unit: Punch holder with quick-change device for punches up to Ø 31 mm, stripper size: L: 360 x W: 300 mm -Punch table: LxW: 360 x 300 mm, punching base 360 x 300 mm with alignment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Stroke Rate: -at 10 mm stroke = up to 45 strokes/min. -at 30 mm stroke = up to 22 strokes/min. -at 50 mm stroke = up to 14 strokes/min. Punching Stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Supplied with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools, punches, and dies included.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine places: 24 (optional: 30, 40) System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: BBT-40 Big Plus® (optional DIN 69871 SK-40, SK-40 Big Plus®) Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil chiller Coolant, Chip, and Compressed Air Management: Coolant system incl. 300 L tank and pumps External coolant around the spindle Chip spirals left and right in the machine bed Compressed air nozzle at the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant pistol Miscellaneous: Swiveling control panel Electronic handwheel (wired) Centralized oil/air lubrication Full enclosure Work light Heat exchanger on electrical cabinet Auto power OFF function Hand tool set Signal tower Transformer 400 VAC, 50 Hz CE declaration of conformity per European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Gusdsifn N Nspfx Adqsh Required installation space: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Available Special Equipment: Spindle: - Direct driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW (FANUC motor) Tool Magazine / Changer: - Drum-type tool magazine with 30 slots, DIN 69871, SK-40 Rotary/Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip & Compressed Air Management: - Bed flushing - ICS coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge front, to left machine side) Air Extraction: - Extraction unit AR Filter ARNO 2VF "Plus" series with EPA filter, motor protection switch, filter condition indicator accessory kit for AR Filter with Ø150 mm connection Measuring & Monitoring Systems: - BLUM TC50 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - Blum Z-Nano tool length measurement and tool breakage monitoring in the machine, incl. mount - Auto door - Pneumatic interface for workpiece clamping Immediately available.