Beli Kamp Tanah bekas (329)

Kondisi: baik (bekas), Tahun pembuatan: 2005, Cantilever racking, double-sided, height 2.90 m, arms 1.20 m each with 2 cross-beams between arms/levels, ideal for storing goods, e.g. on Euro pallets – used –: Price ex location: €24,500 (net) incl. dismantling and loading! Partial quantities available on request – minimum order per rack row! Manufacturer: Bruckamp Regalsysteme Type: unknown Year of manufacture: 2005 Max. load per arm: 2,000 kg Arms bolted Max. load per upright: 2 x 2,000 kg Arm projection: 120 cm (IPE 100 standard) Total rack height: 2.90 m (IPE 160) Number of uprights: 69 units (currently 3 x 23 units) Frame centre-to-centre distance: 1240 mm Heights of the middle and top levels are fixed. It may be possible to adjust these by drilling new holes; pre-drilled holes are not present. Version / Rack A: 3-sectioned, double-sided Version / Rack B: No central division Version / Rack C: Central division on right side only Bwsdpfxowi I Tdo Am Iol Condition: good Availability: immediately Location: Schweinfurt / Würzburg area

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms Bwodsnwmwvepfx Am Isl - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! Bedpfxefivg Se Am Ijwl Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Bodpfsfivg Rjx Am Iowl Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, Tahun pembuatan: 2025, Cantilever racking for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – New equipment: Price ex works incl. loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: New equipment Model: Super Light Set components: 4 uprights with 5 arms each / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 profile steel with fixed welded arms, spaced approx. 330mm apart. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Incl. floor anchors Incl. load rating plate Description: 4 uprights with 1m pitch as a set including all bolts. Key advantages: Bwsdpsxbz Ddsfx Am Iel Easy assembly – the rack is designed for quick and straightforward installation. Versatile – ideal for garages, workshops, or small alcoves, the rack adjusts flexibly to the space. Safe & practical – the rectangular tube arms are fitted with plastic end caps to prevent injuries.

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m Bodpsfivhfjfx Am Iewl - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2020, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW –: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Bwodjfivhgepfx Am Iel Transport cost within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the bay width); the example with 4 frames is simply the most common rack configuration! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2x3 adjustable arms, length 1.20 m, load capacity 750kg per arm - With bracing approx. 1.30 m - Rack uprights double-sided, approx. 3500mm high, hot-dip galvanized - Base and arm depth 1200 mm, each upright with 3 height-adjustable arms - Load capacity with a load center of 600 mm: 750 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1300mm, standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a width of 1.50m a small surcharge applies to the above price! Special sizes (other bay widths) are also available on request, but incur an additional charge and longer delivery time, as they must be custom manufactured! If you do not specify otherwise, the racking will be supplied with a bay width of 1.30m. With a racking row of 4 uprights (3 bays), the length is approx. 4m. Supplied with all bolts and nuts (delivery within Germany via parcel from Würth), floor anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Bedpjw Ip Dtefx Am Iswl

Kondisi: bekas, Penawaran ini untuk 1 dari 2 Gallenkamp magnetic stirrer yang tersedia. Bwsdjxzh D Dspfx Am Iel

Kondisi: bekas, Listing ini untuk Freezer Gallenkamp Super Cold 40. Dilengkapi dengan kunci untuk mengunci freezer. Bwjdpfjxzhb Nox Am Iol

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Bwsdpfx Amegryk Nj Ijl Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Bwjdpo A Dimofx Am Iol Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 439917, jenis arus masuk: tiga fasa, panjang total: 2.200 mm, tahun perombakan terakhir: 2025, lebar kerja: 1.800 mm, lebar total: 2.200 mm, tinggi total: 1.380 mm, panjang rol: 915 mm, berat keseluruhan: 4.082 kg, Walsmolen Roskamp SP 1600 yang telah direnovasi sepenuhnya Sepasang rol tinggi tunggal Panjang rol: 915 mm Diameter rol: 405 mm Berat: 4082 kg Daya motor: 45 kW Bwsdpfxsx Aifle Am Iol Tahun pembuatan: 2006

Kondisi: baru, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 26,5 kW (36,03 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 365 kg, tegangan masuk: 400 V, lebar total: 1.150 mm, panjang total: 1.950 mm, tinggi total: 1.400 mm, masa garansi: 6 bulan, kapasitas pemanasan: 31 kW (42,15 hp), de-Aircooled-Chiller/Wärmepumpe KAMPMANN WSAN XSi 14.1, 26,5 kW/31 kW Kühlleistung: 26,5 kW / 7,53 Tonnen (12/7 — 35°C) Heizleistung: 31 kW / 8,81 Tonnen (40/45 —7°C) Baujahr: 2019 Optionen: Wärmepumpe, Hydraulikmodul Kältekreis: 1 Stück Wärmetauscher: Plattenwärmetauscher Verflüssiger: Kupfer / Aluminium Kompressoren: 1 Stück Mitsubishi Electric LNB65FAEMC (Rollkolben, Inverter) Kältemittel: R410a Anzahl Ventilatoren: 1 Stück ZKSN-750-8-10 Hydraulikmodul: 1 Stück Wasserpumpe WILO BAC40-125-0,75 Abmessungen: 1,95x1,15x1,4 m Gewicht: 365 kg Betriebsstunden: 0 h Zustand: Neu ZUSTAND, PRÜFUNG & BEREITSTELLUNG Der Kaltwassersatz durchläuft sieben Stufen der technischen Inspektion und Überprüfung der Betriebsparameter. Zudem erfolgt ein Testlauf an unserer eigenen Prüfstation mit Anschluss an Wasser (oder Glykol) und Einstellung der Parameter gemäß Ihren Anforderungen. Nach der Prüfung erhalten Sie einen detaillierten Bericht mit den Betriebsergebnissen und dem Gesamtzustand der Anlage. Der Kaltwassersatz ist transportbereit und kann unmittelbar in Betrieb genommen werden. Unsere Ingenieure unterstützen Sie bei Kühlleistungsberechnungen, der Auswahl des passenden Kühlsystems und der Konfiguration erforderlicher Ausstattungsoptionen. GARANTIE & SUPPORT Die Qualität der Anlage wird durch eine Garantie von 6 bis 36 Monaten bestätigt. LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumentation und logistischer Koordination Fordern Sie eine ausführliche Beratung an. Fotos, Videos und ein vollständiger Prüfbericht sind auf Anfrage sofort verfügbar. Bwedpfxswbdhnj Am Isl Alternative Bezeichnungen auf europäischen Märkten: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). Diese Einheit ist in englischer Sprache für internationale Käufer gelistet.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, Horizontal block band saw by Nobis, year 1970 The saw is fully operational, offers a cutting width of approx. 1.2 m, and includes its own carriage with a width of 1.15 m and a length of 10 m. Equipped with a mechanical log clamp. A sharpening device can also be included upon request. We have additional used block band saws available: 1.) Wehrhahn Horizontal Saw 145 Used, fully functional. Cutting width: max. 145 cm, accepts logs up to approx. 1.70 m diameter Saw carriage dimensions: 8 m length x 133 cm width (external width: 155 cm) Fitted with 6 mechanical clamping devices Drive: 30 kW motor Separation circular saw unit for core separation included Price: €23,900 Optional extras: Complete sharpening room: €9,500 Spare gearbox: €2,000 Slewing crane: €5,000 2.) Nienkemper BS0 Horizontal Block Band Saw, year 1955 In good operational condition Frame width: 130 cm Blade guide width: 121.5 cm Cutting capacity: Logs up to 115 cm diameter without turning Theoretically up to 120 cm without turning Larger diameters possible with log turning Heavy-duty, stable frame construction for easy installation Band wheels: 1050 mm x 110 mm Included: Refurbished carriage (1.20 x 6.00 m) New axles Overhauled clamping jaws Bwodsyk D Dmjpfx Am Iel Price: €29,900 If interested, please get in touch. Prices negotiable by phone.

Kondisi: baru, baru dan belum pernah digunakan, hanya terdapat bekas penyimpanan Bodpsyc Emyofx Am Iowl

Kondisi: bekas, Heat and Control NC-3006 Oil Roaster bekas, penggorengan kacang tipe kontinu dengan kapasitas 600 kg/jam, dibuat tahun 2011, dipasang pada 2013, dan terakhir digunakan pada 2014. Peralatan utama meliputi penggoreng (suhu maksimum 200°C dengan konveyor penataan, konveyor utama, konveyor endapan), tangki penyimpanan minyak, heat exchanger pelat, filter minyak, tangki pencampur, dan sistem kontrol. Bwodpsyhc Raofx Am Ijl 'Penggorengan kacang tipe kontinu Oil Roaster ini dirancang khusus untuk volume minyak rendah, pengendalian suhu yang presisi, dan operasi bersih untuk setiap proses kacang: kacang tanah, almond, biji bunga matahari, mete, kacang madu, dan lainnya.'

Kondisi: bekas, Fungsionalitas: belum diuji, Kaeser CB131 C – Kompresor Blower / Blower Rotary Lobe Data teknis: • Daya nominal motor penggerak: 15,0 kW • Tekanan akhir maksimum: 1,81 bar • Kapasitas pengiriman: 7,93 m³/menit (≈ 475 m³/jam) • Kecepatan putar blok: 3.560 rpm • Suhu lingkungan yang diizinkan: 3 – 40 °C • Berat total: sekitar 570 kg Lokasi: 6460 Imst, Tirol (Brennbichl 20) Catatan: Mesin berada di ruang bawah tanah dan harus dikeluarkan sebelum diambil. Bwedoy Idqijpfx Am Iel Dijual oleh balai lelang Köck atas penugasan kurator insolvensi. Inspeksi dapat dilakukan sesuai janji.

Kondisi: siap digunakan (bekas), Ready-to-use slotting machine Bwjdpfxsyfz Tuo Am Ijl Most recently used for manufacturing grub screws and spring plungers. However, it is also suitable for machining various other workpieces (shoulder screws, set screws, dowel screws). Rare machine, immediately operational.

Kondisi: baik (bekas), gaya penekanan: 1.250 t, Press force: max. 1,250 t Clear width: 585 mm Bedpfey Ia Siox Am Iewl Installation height: max. 480 mm Stroke: max. 355 mm Weight: 7,200 kg

Kondisi: bekas, Tangki baja tahan karat berdiri, 1 silinder, bekas Kapasitas: 20 m³ Bwsdsy Hgx Tspfx Am Iol Nomor pesanan: 4372 Material: V4A 1.4571 Dimensi: - Diameter dalam: 2.850 mm - Diameter luar: 3.050 mm - Tinggi silinder: 2.665 mm - Bagian atas: 582 mm - Bagian bawah: 694 mm - Jarak ke tanah: 510 mm - Total tinggi kira-kira: 4.451 mm Data operasional: - Tekanan operasi: -0,1/+6 bar - Temperatur operasi: -10/+100 °C - dilengkapi dokumen TÜV Konstruksi: - bentuk silinder, berdiri pada 4 kaki pipa dari stainless steel - dengan dasar Klöpper - dirancang untuk densitas hingga 1,3 - Isolasi pada silinder dan bagian bawah, penutup baja tahan karat terpasang dengan baut - termasuk sertifikat stabilitas Koneksi: - 1 Dome DN 600 di bagian atas - 1 x DN 150 di tengah - 1 x DN 80 - 8 x DN 50 - 2 x DN 25 - pada silinder 1 x DN 25 - Outlet DN 100 flensa blok, di tengah bawah Berat: sekitar 3,6 ton

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Press hare Schling Gaya tekan 60 kN (6000 kg) Bsdey Hkurjpfx Am Ijwl Langkah dapat disesuaikan dari 0–25 mm Sangat bersih dan dalam kondisi sangat baik

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), demnächst_im_Zulauf_4-Spindelige_Entgrat-_Anfasmaschine Bwjdpsy Hcagefx Am Ijl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, schleifbarer-durchmesser-details-1 Bwodsy Hb T Eopfx Am Ijl

Kondisi: baik (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: VBP00065013000009, Tahun pembuatan: 2021, PÖTTINGER TERRASEM V 6000 DZ adalah alat penabur benih universal modern yang dirancang untuk penanaman presisi tanaman serealia dan tanaman penutup, dengan opsi aplikasi pupuk. Mesin ini termasuk dalam seri TERRASEM dari produsen Pöttinger. Informasi Dasar: Tipe: Alat penabur benih kombinasi (persiapan lahan + kombinasi penaburan) Produksi: sekitar 2021 – sekarang Bodsy Em H Ujpfx Am Iewl Aplikasi: Sistem pengolahan tanah konvensional, minimum, dan tanpa olah tanah (no-till) Opsi: Penaburan + pemupukan (versi “DZ” = hopper ganda / sistem ganda) Spesifikasi Teknis: Lebar kerja: 6 m Lebar transportasi: 3 m Jumlah baris: 48 Jarak antar baris: 12,5 cm Diameter roda tekan: sekitar 380 mm Kapasitas tangki: hingga ~5600 L (terpisah, misal 40:60) Daya traktor yang dibutuhkan: sekitar 180 – 250 HP