Beli Kant-Tekan bekas (5.711)

Kondisi: bekas, Tahun pembuatan: 2018, en_overview_The Gruber AFD6 is a bottle and party keg filling machine, manufactured in 2018 by the German company Gruber, with a total of 725 operating hours. The machine is available immediately. Technical Details - Output: 800 bottles/hour (0.33l) - 750 bottles/hour (0.5l) - 600 bottles/hour (1.0l) - 400 bottles/hour (2.0l) - 240 bottles/hour (5.0l party keg) Actual output may vary depending on CO2 content and beer temperature (practically, up to 1,000 bottles/hour with 0.33l bottles have been achieved). - Long-tube filler with 6 filling stations - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 h Nodpfxju I Hr Uj Aglecl

Kondisi: bekas, Tahun pembuatan: 2006, Overview  The filler and capper block was manufactured in 2006 by the German company Filltec. Technical details  Number of filling stations: 32 Number of capping stations: 8  Magnetic cap feeder for crown corks Mains voltage: 400 V   Frequency: 50 Hz  Auxiliary voltage: 24 Volts DC  Electrical protection class: IP 54 Ncjdpfxsm U R Das Agljl

Kondisi: bekas, Tahun pembuatan: 2018, de-to-hu-001 Njdpfx Asxn A R Ejglscl

Kondisi: bekas, Tahun pembuatan: 1999, Overview: This KHS filling monoblock was manufactured in 1999. It remains in production until the end of October and can be inspected in person. A special feature of the filler is its micro-dosing unit, which allows it to process carbonated or still mineral water with natural flavors. An accumulation table is also included. Technical Data: Rinser, Isobaric Filler, Capper Monoblock | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low operating hours) - Filling of carbonated mineral water and carbonated mineral water with natural flavors - Format: PET bottles 1.25L & 0.50L, cylindrical petaloid base - Bottle neck: PCO28 1881 - Current capacity: 23,400 bph - Number of rinsing nozzles (KHS Innoclean): 40 - Number of filling valves (KHS Innofill): 50 - Number of capping stations (Zalkin): 16 - Also includes Perrier micro-dosing unit for natural flavors - With cap magazine & elevator - Accumulation table Gebo Sidel Type AQ file - Dynamic accumulation and buffering between the filler outlet and the labeling machine inlet, prevents untimely stoppages before the machine (filler, blow molder) caused by the labeling machine Ncodpfxewvl Dgo Aglol

Kondisi: bekas, Tahun pembuatan: 1986, summary Ncsdpoxc H Tmsfx Aglsl This isobaric glass bottle filler was manufactured by the German company Krones in 1986-87 and commissioned in 1988. The machine is a Krones Mecafill VK2V K126-308 featuring 96 filling valves and 18 capping heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (retrofitted in 2009) and a Krones capper (retrofit in 2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (visible in the video) and will be dismantled by the end of September 2025. Spare parts from inventory are included in the scope of delivery. Technical Data Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (9 formats total) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Rotation: Clockwise (L-R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, HDE (hot water injection) and washer/splitter rinsing Products: Beer, non-alcoholic beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water Control system: Siemens S7-300 PLC (retrofitted 2009) Scope of Supply Filler and capper | Krones | Mecafill VK2V K126-308 | 1986-87 (commissioned 1988) | 96 filling valves, 18 capping heads, crown cork closures, right-hand rotation, diameter 2,880 mm, crown cork conveyor system Control system | Siemens | S7-300 | 2009 | PLC retrofit Safety fencing Spare parts

Kondisi: bekas, Tahun pembuatan: 2009, Overview  This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system comprises two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerated air dryer, and one Donaldson UFA-AC0016 oil separator. This setup is designed for reliable and energy-efficient air supply up to 8.5 bar, making it ideal for continuous production environments. The system has been regularly maintained, with comprehensive servicing completed in August 2025, and is in good working condition. The entire plant is still installed and connected, and is immediately available for inspection and sale.  Technical Data  Years of manufacture: 2009 - 2013 Application: Industrial compressed air system Total capacity: 2 × 24.1 m³/min Max. pressure: 8.5 bar Power consumption: 274.8 kW  Scope of supply  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Refrigeration air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Njdpfxexrc Acj Agljcl

Kondisi: bekas, Tahun pembuatan: 2016, Overview This isobaric triblock filling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for bottling carbonated beverages and combines rinsing, filling, and capping in a compact unit. The machine is still installed, can be connected to demonstrate basic functions, and is for sale as the owner requires a larger brewhouse. Technical Data Capacity: approx. 500–650 bph (bottles per hour) Formats: Bottle diameter: 30 to 120 mm Bottle height: 140 to 350 mm Closures: 26 or 29 mm crown caps Filling method: Counter-pressure / isobaric Rinsing heads: 4 Filling valves: 4 Capping unit: 1 Power: 0.75 kW Voltage: 240V, 50Hz, single phase Approximate dimensions Length: 1370–1410 mm Depth: 640 mm Height: 2100 mm Ncsdpfx Agewfh D Ielel

Kondisi: bekas, Tahun pembuatan: 2003, Overview This rinser-filler-capper block was manufactured by Kosme in 2003. The block is designed for filling carbonated and non-carbonated beverages into PET bottles. It comprises a rinser with 2 channels, a pressure filler, and a capper for plastic screw caps. The machine is currently available for immediate delivery. Technical Data Output: 10,000 bottles per hour Formats: 1.0 L PET bottles, 0.5 L PET bottles, 0.33 L PET bottles Direction of travel: Clockwise Rinser Specifications: - 36 rinsing stations - 2-channel rinser - Rinsing pipes made of stainless steel Filling System: - Isobaric system - 36 filling valves Capping System: - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sports caps Dimensions: approx. 4,100 x 3,000 x 4,000 mm Scope of Delivery Rinser, filler, capper in triblock design Vacuum barrier system CIP sleeves made of stainless steel Ncodpfx Aswiy Tveglsl Cap feeding system

Kondisi: bekas, Tahun pembuatan: 1986, translation-001 Nodpoxc H Tgjfx Aglecl

Kondisi: bekas, Tahun pembuatan: 2020, de-hu-1 Njdsxnmv Eopfx Aglocl

Kondisi: bekas, Tahun pembuatan: 2017, de-hu-001 Nodpfx Asxn A Rljglscl

Kondisi: bekas, Tahun pembuatan: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly maintained, is still assembled, and can be inspected at any time. Technical data Capacity: 40,000 bottles/hour (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: Crown cork Direction of rotation: clockwise Infeed/outfeed height: 1,150 mm ± 50 mm Filling stations: 96 Capping stations: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control: Siemens S7 Power consumption: 15.17 kW Nsdpfxjqqz T He Aglocl

Kondisi: bekas, Tahun pembuatan: 2023, Overview This isobaric filling block was manufactured in 2023 by the Italian company Alfatek BP Srl. The machine is a Beer Plus version, featuring an additional 8-head degassing turret before the filler that enables triple pre-evacuation for enhanced bottling performance. After purchase, the machine will be completely overhauled, delivered in as-new condition, and provided with a 12-month warranty. The unit is immediately available. Ncodpow U Si Ssfx Aglsl Technical Data - Capacity: 6,000 bottles per hour (with 33 cl containers) - Formats: 33 cl, 50 cl, 75 cl (26 mm and 29 mm crown caps) - Configuration: - 24-head rinser - 8-head deoxygenation turret - 28-valve isobaric filler - 4-head crown capper (Arol) - Application: Beer and carbonated beverages (e.g. lemonade, soda) - Mouth finish: 26 mm crown cap, 29 mm crown cap - Condition: Excellent condition, fully refurbished and delivered with warranty Scope of Supply - Complete monoblock including rinser, degassing turret, isobaric filler, and crown capper - Documentation included - 12 months warranty post-refurbishment

Kondisi: bekas, Tahun pembuatan: 2018, isobare-fuller-2018-rizzolio-equipment Ncsdjxa Apfspfx Aglol

Kondisi: bekas, Tahun pembuatan: 2013, Overview The pressure filler was manufactured in 2013 by the German company KHS. The pressure filler is still in operation at a major German brewery and can be inspected at any time. Technical specifications - Capacity: 22,000 - 65,000 bottles/hour - Number of filling stations: 168 - Number of capping stations: 24 - Filler pitch circle: 5,040 mm Scope of delivery Nsdpfjl Sm S Dox Aglscl - Valve manifold - Vacuum unit - Hygienic infeed - Fill level and closure inspection - Discharge and discharge conveyor - Technical documentation - Program backup - Extensive conveyors are available, which can be purchased additionally

Kondisi: bekas, Tahun pembuatan: 2013, Overview This isobarometric filling machine was manufactured in 2013 by the Slovenian company VIPOLL. This filler is available because it was replaced by a larger machine. It has very few operating hours and can be inspected in person at any time. Technical Details Capacity: 3,000 bottles / hour (adjustable) Number of filling valves: 12 valves Number of crown cappers: 3 heads Counter-pressure filler with double pre-evacuation Currently set up for 330 ml longneck bottles Total operating hours: under 1,000 hours Direction of operation: right to left Filling valves: mechanical electropneumatic Mechanical height adjustment Njdpfx Agotm Hv Tslocl

Kondisi: bekas, Tahun pembuatan: 2020, Overview The isobarometric filler Meheen M6 from the American manufacturer Wild Goose was built in 2020. The machine has been used very little. Technical details Capacity: Up to 2,160 bottles per hour Number of filling heads: 6 Last used formats: 0.33l Longneck Possible bottle diameter: 5.3 cm - 7.6 cm Dimensions (footprint): 1680 mm x 1070 mm Ncedper Hx Disfx Agljl

Kondisi: bekas, Tahun pembuatan: 2004, Overview The filler was manufactured in 2004. In recent years, it was operating in a brewery in France. The entire brewery has been sold to a company in Belgium. The filler is no longer required and is therefore available for sale. It is suitable for filling both beer and soft drinks. The machine has been dismantled and is stored properly. Technical data: Ncodpfxel Hxl Ie Aglsl - Capacity: 2,500 bottles/hour at a volume of 0.75 l/bottle; 3,300 bottles/hour at a volume of 0.33 l/bottle - 20 rinsing stations - 20 filling valves - 3 capping units - Formats: 0.33 l; 0.75 l - Working direction: left to right

Kondisi: bekas, Tahun pembuatan: 1999, Overview This SIDEL blow molding machine and the KHS filling monoblock were both manufactured in 1999. They will remain in production until the end of October and are available for personal inspection. A special feature of the filler is its micro-dosing unit, which allows it to process carbonated or still mineral water with natural flavors. The filler (KHS Innofill monobloc) and the accumulation table (Sidel AQ) are also available separately, without the blow molder (Sidel SBO 18 Series 2); pricing available upon request. Technical Specifications Stretch Blow Molding Machine | SIDEL | SBO 18 Series 2 | 1999 - Current capacity: 23,400 bph in 1.25L - Operating hours: 40,000 - Number of molds: 18 - Mold type: Shell-type quick-change - Formats produced: 1.25L bottles, cylindrical petaloid base - Oven type: Sidel - Neck finish customization: PCO 1881 - Preform type: with recycled PET resin - The machine has been regularly maintained - Machine equipped with: - Sidel preform tipper - Sidel hopper with cover and feed - Sidel preform destacker - Feed rail for Sidel preforms - Blow-off station for 18 molds - Sidel control cabinet with Siemens Sidel PCC drive & control - Lanfranchi bottle buffer silo - Agitation and air conveyor system with drive to infeed KHS Monoblock - Supplied with all available format and spare parts - Rinsing unit, isobarometric filler, capper - Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low operating hours) - Filling of carbonated mineral water and also carbonated mineral water with natural flavors - Processing: PET bottles 1.25L & 0.50L cylindrical petaloid base - Bottle neck: PCO28 1881 - Current capacity: 23,400 bph - Number of rinsing nozzles (KHS Innoclean): 40 - Number of filling valves (KHS Innofill): 50 - Number of capping stations (Zalkin): 16 - Including micro-dosing system Perrier for natural flavors - With cap magazine & elevator Ncodpferqar Sox Aglel Accumulation Table - Gebo Sidel Type AQ file - Dynamic accumulation and buffering between filler discharge and labeler infeed, prevents unexpected stops in front of the machine (filler, blow molder) caused by the labeler

Kondisi: bekas, Tahun pembuatan: 2015, Overview The Kosme / Krones Barifill is an isobaric filler currently operating in a German brewery, where it can be seen in action. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour, with the manufacturer’s rated speed at 7,000 bottles/hour. The system is designed for 26-mm crown caps and is equipped with 30 filling stations. Nodov Ic Uzopfx Aglecl Technical Data Capacity: 8,000 bottles/hour (for 0.33-liter bottles) Closure type: 26-mm crown caps Formats: - 0.5 NRW - 0.5 Long Neck - 0.5 Lochmund - 0.33 ALE - 0.33 SUD - 0.33 Steinie swing-top Filling stations: 30 Electrical Specifications: - Max. voltage: 3x400 V + N + GND 50Hz - Power consumption: 13.00 kW Operating hours: 18,393 (as of March 2025) Included spare parts: - Drives - Gearboxes - Cardan shaft - Others Annually serviced by Kosme/Krones - Hoist cylinder replaced in 2024 - Valves and capping unit serviced in 2025 Features: - Bottle shower - High-pressure foam injection - Bottle stoppers - Table rinsing system - Crowner cap container

Kondisi: bekas, Tahun pembuatan: 2007, Overview The filler was manufactured in 2007 by the German company Krones. The machine has been regularly maintained, remains installed, and can be inspected at any time. Technical Details Capacity: 40,000 bottles/hour (200 ml) Formats: 200 ml glass bottle, 237 ml glass bottle Closure: crown cork Direction of rotation: counterclockwise Infeed/outfeed height: 1,150 mm ± 50 mm Filling stations: 96 Capping stations: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Power consumption: 15.17 kW Ncsdpjqqz Txofx Aglol

Kondisi: bekas, kapasitas tangki: 313 l, desc-chemical-tank Nsdpfx Agoxqbbhjlscl

Kondisi: bekas, kapasitas tangki: 630 l, EN_GENERAL Design: suspended Notes: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: available Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Njdsxqba Depfx Aglscl Nameplate: Vacuum: 1.00 bar Volume: 630 litres Jacket volume: 14.5 litres Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Last application: chemicals VESSEL Max. permissible operating temperature: 300 °C Base type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: central in top head Agitator features: motor/gearbox unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top head wall thickness: 15.8 mm

Kondisi: bekas, kapasitas tangki: 1.150 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Halar coating on the inside (very good resistance to acids, alkalis, and solvents); no nameplate present; several connections were modified by the previous operator, including one new outlet welded in place (no coating in the welded area of the lower shell and in the new outlet itself; also no coating on the manhole cover); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Total width: 1,660 mm Total height: 2,600 mm Total length: 1,850 mm Heating/cooling: present Insulation: present Max. overpressure: 0.60 bar Top end: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Previous application: gasoline VESSEL Max. perm. operating temperature: 120 °C Support type: frame Njdsxqbakspfx Aglecl HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top cover (DN 400) Outlet: flange DN100 Note: minor residues, dents on the insulation shell MATERIAL QUALITY Bottoms material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 AGITATOR Agitator arrangement: eccentric in top cover TECHNICAL DATA / DIMENSIONS Bottoms wall thickness: 4.0 mm

Kondisi: bekas, kapasitas tangki: 720 l, GENERAL Equipment: crane lugs Design: suspended Remarks: 3 brackets made of Fe; most bolts for the top cover flange are missing Internal diameter: 790 mm Total height: 2,250 mm Heating/Cooling: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top: bolted lid Agitator: beam agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 720 liters Double jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Double jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last use: chemicals VESSEL Max. permissible operating temperature: 150 °C Support type: lug supports HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR Baffle: Agitator arrangement: centrally mounted in the top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.9 mm Top wall thickness: 8.2 mm Ncjdpfx Agoxqa U Hslel