Beli Kunzmann Ba 600 bekas (62)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Travel (X/Y/Z): 400 / 320 / 400 mm Control: HEIDENHAIN TNC 410 Spindle speeds – stepless: 0 – 4,000 rpm Quill stroke: 60 mm Tool holder: SK 40 Clamping surface of table: 650 x 350 mm Total power requirement: 6.5 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.5 x 1.8 x 2.0 m Electronic handwheel: HR 410 Kjdpfeunt Ihox Ag Rsww Touch probe: MP 11, automatic tool measurement: TT 120 Enclosure, tool holders, ...

Kondisi: bekas, Tahun pembuatan: 1972, Milling machine used Make: Kunzmann Model: UF6N Year of manufacture: 1972 Technical specifications: Automatic longitudinal table travel: 440 mm Manual longitudinal table travel: 450 mm Kwjdpoudb N Djfx Ag Rjw Cross table travel: 200 mm Vertical table travel horizontal/vertical: 465/500 mm Table size: 860x240 mm Table tiltable on both sides: 45° Distance table/spindle: 430 mm Spindle taper: ISA 30 Quill stroke: 60 mm Spindle head swiveling +/- 90° 18 spindle speeds horizontal: 32-1342 rpm 18 spindle speeds vertical: 72-2888 rpm 6 automatic longitudinal feeds: 13.12-164 mm/min 6 automatic cross feeds: 26.24-328 mm/min Spindle drive: 1.8/2.6 kW with tiltable vertical milling head, clamp, tailstock, collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Kedpfx Ashikrrsg Roww Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen -

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 60 mm, kecepatan spindel (maks.): 400 rpm, kecepatan spindel (min.): 1 rpm, penjepit spindle: MK 4, panjang meja: 700 mm, lebar meja: 425 mm, tinggi total: 2.000 mm, panjang total: 2.000 mm, lebar total: 2.000 mm, kecepatan rotasi (maks.): 4.000 rpm, berat keseluruhan: 2.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle taper: SK 40 Spindle speeds: 1 - 4000 rpm Quill stroke: 60 mm Equipped with: - ISO tool holders - Coolant system - Operating manual Kwedpfeyac Hlex Ag Row Country of origin: Germany Motor power: 5 kW Machine dimensions (LxWxH): 200 x 200 x 200 cm Machine weight: 2000 kg

Kondisi: bekas, Tahun pembuatan: 1989, 855d10e0 Kedpfxsh Hrvfs Ag Reww

Kondisi: bekas, Tahun pembuatan: 2004, Jam Operasi: Kontrol aktif: 3123 jam Kwsdswglapjpfx Ag Rjw Mesin aktif: 2970 jam Program berjalan: 902 jam Waktu putar spindle: 988 jam Sumbu terkendali: 3 Data Teknis: Ruang gerak X/Y/Z: 650 / 500 / 450 mm Luas pemasangan: 1000 x 600 mm Taper spindle: SK 40 Kecepatan spindle: 12.000 1/menit Beban meja maks.: 400 kg Jumlah tempat majalah alat: 20 Daya: 24 kVA Berat mesin, sekitar: 5500 kg Perlengkapan: - Kontrol Heidenhain iTNC 530 - Penukar alat otomatis 20 posisi - Pengukur alat Heidenhain - Pengukur benda kerja Heidenhain - Handwheel Heidenhain - Menzel peminyakan minimum - sekitar 25 holder alat

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 410M Tool Milling Machine with Heidenhain TNC 128 Control – LIKE NEW CONDITION, CE-Compliant!! Technical Data: >> Year of manufacture: 2022 Machine No.: 411555 >> Clamping surface of milling table: 650 x 375 mm Number of T-slots: 5 T-slot width: 14 H7 T-slot spacing: 63 mm Maximum load: 250 kg >> Spindle speed range: 1-4500 rpm Kwjdpfx Agjv Rppko Row >> Feed rate (X, Y, Z axes): stepless, up to max. 5/5/4 m/min >> Travels (X/Y/Z): 410/350/450 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight: approx. 2000 kg >> Dimensions (approx.): 2 x 2 x 2 m >> Connected load: 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Electronic handwheel Heidenhain HR 510FS >> Hydraulic clamping for vertical and horizontal operation >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Machine lamp >> Minimum quantity lubrication system >> Steady rest >> Digital readout for quill travel >> Oriented spindle stop (thread cutting without compensating chuck) >> Chip protection enclosure >> Edge finder KT 130 >> Coolant system >> 200 mm rotary table >> Indexing device with 125 mm 3-jaw and 4-jaw chuck >> 125 mm hydraulic machine vice About the machine: For sale is a Kunzmann WF 410M tool milling machine, year 2022, in like-new condition, equipped with a Heidenhain TNC 128 control. The TNC 128 offers a wide range of dialog-guided cycles with graphical simulation for quick and easy data entry, e.g.: various drilling cycles, thread cutting, hole patterns, linear hole arrays, rectangular pockets, rectangular tenons, and surface step-over operations. This is a very user-friendly control system. In addition, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple, thanks to the pivoting vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 CNC Control – Excellent Condition, CE Compliant! Technical Data: • Year of manufacture: 2006, Machine No. 348013 • Rigid angle table • Infinitely variable spindle speed up to 4,500 rpm • Stepless feed on 3 axes from 0 to 2,000 mm/min • Rapid traverse on X and Y axes: 5,000 mm/min • Z axis rapid traverse: 4,000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quills – SK40 taper • Hydraulic drawbar system • Weight: approx. 1,800 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 15 KVA Equipment and Accessories: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control operation manual and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition. It comes from a facility where it was primarily used sparingly for training purposes only. The CNC control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann in operation at our site. Kodewrhxfjpfx Ag Reww

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 Contouring Control – Excellent Condition, CE-Compliant!! Technical Specifications: >> Year of manufacture: 2004 | Machine No.: 370506 >> Clamping surface of milling table: 800 x 425 mm - T-slots: 6 - T-slot width: 14 H7 - Slot pitch: 63 mm - Maximum table load: 300 kg >> Spindle speeds up to 4,500 rpm >> Feed rate up to 2,000 mm/min - Rapid traverse up to 5,000 mm/min >> Travel (X/Y/Z): 600/400/400 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Approximate weight: 2,000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and Equipment: Kwsdpfx Aowpkcheg Row >> Heidenhain TNC 310 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication system >> Spindle brake >> Electronic hand wheel >> Heidenhain probe >> Technical documentation, spare parts diagrams, operating manual >> Fully enclosed safety cabin >> Coolant system About the machine: Offered is a Kunzmann WF7/3 universal milling machine equipped with Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very user-friendly. The machine also features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Kunzmann under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Universal Milling Machine with Heidenhain TNC 320 CNC Control – Excellent Condition, CE Compliant! Technical Specifications: - Year of manufacture: 2008, Machine No. 348084 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed in 3 axes: 0 to 2,000 mm/min - Rapid traverse: X and Y axis 5,000 mm/min, Z axis 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, control manual, and programming examples - Handwheels - Coolant system Kjdsv Dut Ispfx Ag Roww - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition. It comes from a facility where it was used only minimally for training purposes. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal setup is very easy thanks to the pivoting vertical head. The guideways are regularly lubricated through the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to visit us and inspect the Kunzmann under power on site.

Kondisi: baru, Tahun pembuatan: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain path control TNC 128 Travel X/Y/Z = 610/400/450 mm Spindle speed 1-4500 rpm Power 8.5 kW at 100% duty cycle Spindle taper SK40 DIN 69871 (Form AD) with pull stud DIN 69872 Fixed angle table 800 x 425 mm, 6 x 14 H7 T-slots Coolant system 66 liters Electronic handwheel HEIDENHAIN HR 510 FS Kwedpfx Ageuf Sv Do Rsw Further technical data available upon request. The machine is located at our premises in 71334 Waiblingen-Beinstein, available immediately, and can be inspected by arrangement. Please contact us in advance to schedule a visit.

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Ksdpfsiqkc Isx Ag Rjww Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle.

Kondisi: bekas, Tahun pembuatan: 1996, Universal tool milling machine x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Space requirement: approx. 2,000 x 1,000 x 2,100 mm Original price: approx. €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swivelling control panel, situated right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min Kwjdpfow U U Sisx Ag Rsw - Central lubrication, electric - Coolant system - Chip tray - Operating instructions for machine + control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Kondisi: baik (bekas), Horizontal milling device – counterholder for KUNZMANN milling machines, series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124. Two units available. Kjdevr Stujpfx Ag Reww The original price from Kunzmann is over €2,000 + VAT. With an appropriate adapter plate, it should also fit other machines, e.g. EMCO, MIKRON, DECKEL, FPS, etc. Net price ex works

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Kunzmann WF 410 M Mesin Frais (2022) Produsen: Kunzmann Tipe: WF 410 M Mesin Frais Tahun produksi: 2022 Kondisi: bekas, sangat baik, hampir seperti baru Jam operasional: 2355 jam Jam spindel: 253 jam Perjalanan X: 410 mm Perjalanan Y: 350 mm Perjalanan Z: 450 mm Penggerak utama (100%/25% ED): 6,8/13,0 kW Kisaran putaran: 1–4500 rpm Tipe dudukan alat: SK 40 DIN ISO 7388-1 Kisaran feeding hingga 5 m/menit Berat sekitar 2.000 kg Meja sudut, tetap Area penjepitan: 800 x 425 mm Alur T: 6 x 14 H7 Beban meja maksimal: 300 kg Unit pendingin Lampu mesin Kedpjx Ni U Nefx Ag Roww Spindel frais horizontal dengan gearbox Ruang lingkup pengiriman: – Handwheel elektronik HR 510 – Dokumentasi asli Tanpa ragum.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, tinggi total: 2.000 mm, lebar total: 2.000 mm, panjang total: 2.000 mm, lebar meja: 425 mm, panjang meja: 800 mm, berat keseluruhan: 2.000 kg, berat benda kerja (maks.): 250 kg, Travel paths X/Y/Z 600/400/400 mm, speeds 1 - 4500 rpm, motor 7.5 kW, spindle SK 40, Heidenhain TNC 124 control, table size 800x425 mm, hydraulic tool clamping, edge finder, swiveling milling head, coolant system, tool holders, electronic handwheel, operating manual Kjdpfx Aow Ay N Dsg Reww

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Specifications: - Year of manufacture: 2003 Machine no.: 344174 - Fixed angle table - Infinitely variable speed up to 4000 rpm - Infinitely variable feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/320/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system - Heidenhain electronic handwheel About the machine: Kwodsx Elxpepfx Ag Row Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal setups. Changing from vertical to horizontal operation is very easy thanks to the swiveling vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and inspect the Kunzmann under power at our site. The machine is immediately available.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Universal tool milling machine Brand: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, freshly repainted RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric acceptance with test protocol Accessories: - HEIDENHAIN TNC 124 traverse control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probe for workpiece position detection for determining workpiece reference points for measuring finished parts incl. Weldon tool holder SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) swivels in 3 axes rotatable 360° (displayed digitally as 4th axis in the control) tiltable +/- 30° tilt range towards the machine: 45° tilt range away from the machine: 15° Centring bore Ø 32 mm table load capacity: 150 kg - Vertical milling head SK 40 with hydraulic drawbar system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard cabin, traversing, electrically locked Kedem Nbwtspfx Ag Rsww - Operating manual Used, as seen The machine is technically according to the state of the art of its year of construction.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 7 CNC milling machine with TNC 410 control Manufacturer: Kunzmann Model: WF 7 Year of manufacture: 2001 Condition: used, under power Control: Heidenhain TNC 410 X travel: 610 mm Y travel: 400 mm Z travel: 400 mm Spindle taper: SK 40 Spindle speed: 1–5000 rpm Tilting/swiveling table Scope of delivery: – Documentation Kwsdsxwl Ufspfx Ag Rjw – Various tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 12.959 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 12.000 rpm, tinggi total: 2.450 mm, lebar total: 2.400 mm, panjang total: 3.100 mm, lebar meja: 630 mm, panjang meja: 630 mm, beban meja: 350 kg, berat keseluruhan: 6.800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Simultaneous Machining Center Year of Manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Kwodpfx Agexwl T Uj Row Z-axis: 450 mm Vertical milling head swivel range: -5° to +95° NC rotary table ø 630 mm Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools IKZ: tool clamping system with coolant supply and air blast function through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for TS 640 probe 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.0 x 0.5 m Scope of delivery: – Documentation – Machine feet – Machine lamp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 Heidenhain Digital Display Year of Manufacture 1994 Excellent CONDITION!! Technical Data: >> Year of manufacture: 1994 >> Fixed angle table >> Spindle speed from 40 to 2550 rpm >> Infinitely variable feed on X Y Z axes from 0 to 2000 mm/min >> Travel path X/Y/Z: 400/320/400 mm >> Rapid traverse on all axes >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1500 kg Kodpfsvyr R Nox Ag Rjww Accessories and Equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the Machine: For sale is a Kunzmann WF4/3 tool milling machine in excellent condition. The machine comes from a government facility where it was only lightly used. The conversion from vertical to horizontal operation is very straightforward thanks to the fold-away vertical head. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power onsite.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, from Training Workshop! Technical Specifications: - Year of manufacture: 2010, Machine No. 347283 - Rigid angle table - Spindle speed: infinitely variable up to 4,500 rpm - Variable feed rate in 3 axes: 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm - Vertical and horizontal quill – ISO 40 - Hydraulic clamping system - Weight approx.: 1,800 kg Kwodpfx Aoxuppuog Rew - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition with very few operating hours. It comes from a facility where it was solely used for training purposes. The control system is user-friendly and intuitive. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is fast and easy thanks to the swiveling vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann machine has undergone mechanical and electrical inspection at our facility. You are welcome to visit us and test the machine under power on-site. There are 7 pieces of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Universal Milling Machine with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, From Training Workshop! Technical Data: >> Year of manufacture: 2010; Machine no. 347284 >> Fixed angle table >> Spindle speed: infinitely variable up to 4,500 rpm >> Feed: stepless on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min; Z axis: 4,000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Maximum table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic drawbar system >> Weight: approx. 1,800 kg Kjdpfx Agoxupdlo Rsww >> Dimensions approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition and has only a few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal setups. Conversion from vertical to horizontal operation is simple thanks to the tilting vertical head. The machine’s guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to inspect and test the machine under power on site. We have 7 units of Kunzmann WF4/3 with TNC 320 Heidenhain milling machines available for immediate delivery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: Kodpfx Ajxupc Ueg Rsww >> Year of manufacture: 2010 Machine No. 347247 >> Rigid angular table >> Spindle speed: infinitely variable up to 4,500 rpm >> Feed rate: infinitely variable in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping both vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, operation manual for the controller and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in very good condition with only minimal operating hours. It comes from a facility where it was only used for training purposes. The controller is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The ways are lubricated regularly by the central lubrication system. The Kunzmann has been electrically and mechanically tested in our facility. You are welcome to inspect and test the Kunzmann in operation on site. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 are available. Immediate availability.

Kondisi: bekas, Univ. NC Tool Milling Machine KUNZMANN Model WF 3/4 Mach. No. 341020 Year of manufacture: 1998 Travel paths X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 – 2500 rpm Feeds X, Y, and Z axes 0 – 1000 mm/min, stepless Rapid traverse X, Y axis 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Kwedpfslvyrbjx Ag Rsw Spindle motor power 3 KW Electrical connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and stepless electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet mounted on the machine - Coolant tank with separate pump - Central lubrication - Lighting Space required (L x W x H) 1800 x 1800 x 1900 mm Weight 1300 kg Good condition