Beli Leipzig bekas (608)

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm Kodjvz Hqtspfx Aahefa - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW Ksdpfx Aaevz Hqmjhofa - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm Kodovz Hqgjpfx Aahefa - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800 x 560 x 445 mm Weight: 40 kg Total power requirement: 1 kW CO2 Cutting and Engraving Laser LASERMAX 3021 - Working area X, Y: 300 x 210 mm - Worktable with electric height adjustment - CO2 laser power: 40 W - Engraving speed: 0–36,000 mm/min - Cutting speed: 0–30,000 mm/min - Repeat accuracy / resolution: ±0.05 mm / 1000 dpi - Minimum font size: 3 mm - Linear guides in X and Y axis - Drive for X and Y axes with high-precision belt drive via stepper motors - Control via LCD display - Software: RDWorks from Windows 7 onwards - USB interface with 128 MB memory - Water cooling (submersible pump DK 4000) for stable operation of the laser system and long tube life - Freely definable zero point on the work surface for flexible operation and easy positioning - Power consumption max. 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50 Hz - Our laser machines come with a 1-year warranty, laser tubes with a 10-month warranty - Cutting depth depends on material (acrylic 6 mm, wood 4 mm, MDF 2 mm) Kfedpfevz Hqajx Aahea - Suitable for wood, ceramics, glass, and plastics - Includes exhaust fan - Includes compressor - Includes submersible pump - Includes electric table height adjustment - Dimensions: L=800, W=560, H=445 mm - Weight: 40 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 600 x 700 x 1050 mm Weight: 120 kg Total Power Requirement: 1.2 kW Laser Extraction System LA-1500-IQ Suitable for filtering laser fumes and dust such as acrylic, plastic, wood, and more; also applicable for air purification during soldering, laboratory work, etc. The capacity is designed for a working area of 1400 x 1000 mm. Function: The LCD display shows both airflow and air pressure. The airflow is adjustable. A remote control for adjusting the airflow is included in the delivery. The machine is equipped with a warning system to indicate when a filter is blocked and needs to be replaced. Fume and dust filtration occurs in multiple stages. Two pre-filter stages remove coarse particles and simultaneously protect subsequent fine dust filters from premature saturation. The activated carbon filter purifies the air at the molecular level, ensuring clean breathable air. - Extraction performance: 1500 m³/h - Filtration efficiency: > 99.9% - 2 fans: 2 x 600 W = 1200 W - Air pressure: 3800 Pa - Noise level: =60 dB(A) - Voltage: 230 V / 50 Hz - Primary filter (pre-filter) 430 x 430 x 4 mm for particles >=5 micron Kjdpfx Ajvz Hp Njahofa - Medium filter 430 x 430 x 300 mm for particles >=1 micron - HEPA filter 430 x 430 x 50 mm for particles >=0.01 micron and smoke - Gas filter 430 x 430 x 150 mm for odours and toxic gases - Hose connection diameter: 150 mm - Dimensions: L = 600 mm, W = 700 mm, H = 1050 mm - Weight: 120 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2040 x 1495 x 1025 mm Weight: 540 kg Total power requirement: 2.3 kW CO2 Cutting and Engraving Laser LASERMAX NOVA ELITE 1490-150W - Certified as Laser Class 1 in closed operation - Working area X, Y: 1400 x 900 mm - Electrically height-adjustable worktable up to 200 mm - CO2 laser peak power 150 W - Maximum speed: 1200 mm/s - Maximum engraving speed: 800 mm/s - Repeatability: ±0.02 mm - Minimum font size: 1 mm - Linear guides on X-axis and Y-axis - Material support with aluminum slats and honeycomb table included - X and Y drive with high-precision toothed belt drive via stepper motors - Compatible operating systems: Windows 7 or newer - Control via LCD display - Ruida Controller RD6445 with 128 MB RAM - Interfaces: USB, WIFI, RJ45 Kjdpfx Aovz Hpvoahofa - Red positioning laser for reduced setup times - Freely definable origin on work area for flexible operation and easy positioning - Integrated autofocus for fast adjustment of working height - Power consumption: 2300 W - Supported file formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting performance in acrylic approx. 15 mm) - Standard lens focus: 63.5 mm (2.5”); options: focus 50.8 mm (2.0”), focus 101.6 mm (4.0”) - Openings at front and rear for feeding through longer workpieces - Active water cooling for stable operation of the laser system and long tube service life integrated - Integrated extraction fan 500 W - Integrated air compressor 135 W - Including castors with brake and leveling feet - Suitable for wood, ceramics, glass and plastics - Machine dimensions (LxWxH): 1920 x 1600 x 1100 mm - Packing dimensions: 2040 x 1495 x 1025 mm - Net weight: 540 kg - Shipping weight: 570 kg Options: - Rotary device for engraving cylindrical and conical objects, with rollers - Rotary device for engraving cylindrical objects with 3-jaw chuck

Kondisi: baru, Tahun pembuatan: 2025, copy-lathe-kd-1300-technical-specification Kfsdpevz Hpcjfx Aahea

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 1680 x 930 x 1200 mm Weight: 350 kg Total power requirement: 3.5 kW Edge Sander KSM-3000 ECO - Table size: 960 x 350 mm - Sanding belt height: 200 mm - Sanding belt dimensions: 3000 x 200 mm - Sanding belt back panel: 1050 x 200 mm - Oscillation stroke: approx. 20 mm - Belt speed: 20 m/sec - Table lift: up to 230 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Heavy-duty, high-quality overall construction - Veneer sanding unit with fine adjustment, contact shoe, pressure-relief rollers, and stops - Infeed fence with slots for veneer overhangs - Dedicated oscillation drive with gear motor - Extendable table extension with multi-roller system as standard - Grinding unit steplessly tiltable up to 45° - Round sanding table as standard - Mitre fence with vernier protractor scale - Belt tension with spring mechanism as standard - Graphite-coated running surface - Extraction port 100 mm - Including sanding belt - Including veneer sanding unit - Including mitre fence - Dimensions: L=1680, W=930, H=1200 mm Kedpfevz Hn Sjx Aahsfa - Net weight: 285 kg - Gross weight: 350 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2200 x 1340 x 1050 mm Weight: 640 kg Total power requirement: 1.3 kW CO2 Cutting and Engraving Laser LASERMAX MAXI 1610-80W SINGLE - Working area X, Y: 1600 x 1000 mm - Chain conveyor belt for leather and textiles - Roll holder / unwind device - Front collection net - CO2 laser power: 80 W - Engraving speed: 0–6000 mm/min - Cutting speed: 0–1000 mm/min - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axis Kfsdpfxsvz Hnxs Aahoa - X, Y drive via high-precision timing belt drive with stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB working memory - Red positioning laser to reduce setup times - Freely definable origin on the work surface for flexible operation and easy positioning - Control system: DSP - Machine software: RDWORKS - Compatible software: CorelDraw, AutoCAD, Photoshop - Power consumption max. 1300 W - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, laser tubes have a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 25 mm) - Active water cooling for stable operation of the laser system and long laser tube life - Also suitable for wood, ceramics, glass, and plastic - Dimensions: L=2200 mm, W=1340 mm, H=1050 mm - Weight: 640 kg

Kondisi: baru, Tahun pembuatan: 2025, maße-(länge/breite/höhe)-1720x760x1160-mm-gewicht-230-kg-gesamtl eistungsbedarf-3,5-kw-kantenschleifmaschine-ksm-2600-eco •-table-size-750-x-300-mm •-abrasive-belt-dimensions-2600-x-150-mm •-back-plate-for-belt-850-x-200-mm •-belt-speed-20-m/sec. •-table-lift-up-to-200-mm •-oscillation-motor-power-0.25-kw •-main-motor-power-3.0-kw •-extraction-port-100-mm •-oscillation-drive-with-gear-motor •-height-adjustable-cast-iron-table,-double-column-guided •-double-extraction-system-for-main-grinding-unit-and-round-grin ding-table •-grinding-assembly-continuously-tiltable-up-to-45° •-graphite-coated-contact-surface •-incl.-extendable-table-extension-with-multi-roller-system •-incl.-mitre-fence-with-scale Kfedpfx Aevz Hnroahea •-incl.-abrasive-belt •-dimensions-l=1720,-w=760,-h=1160-mm •-net-weight-180-kg •-gross-weight-230-kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 960 x 900 x 1460 mm Weight: 100 kg Total power requirement: 2 kW Fibre Laser Marking Machine LASERMAX FL-20 FLEXI - Working area: 200 x 200 mm / 300 x 300 mm - Wavelength: 1064 nm - Laser source: 20W Raycus Kodpfsvz Hm Uox Aahofa - Repetition frequency: 20–60 kHz - Marking line width

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1320 x 700 x 1120 mm Weight: 125 kg Total power requirement: 1.5 kW Edge Sanding Machine KSM-2260 - Work table: 810 x 180 mm - Table height adjustment: 100 mm - Belt length: 2260 mm - Belt width: 150 mm - Sanding belt backing: 770 x 170 mm - Sanding unit tiltable: 90° - 0° - Belt speed: 16 m/sec - Auxiliary table: 290 x 265 mm Kodpfxovz Hmzo Aahefa - Speed: 1420 rpm - Extraction nozzle Ø 100 mm - Motor power: 1.5 HP / 400 V - Required space: 1320 x 700 x 1120 mm - Weight: 125 kg Complete with: - Mechanically oscillating sanding unit - Height-adjustable auxiliary table - Work table with integrated T-slot for mounting the mitre fence - User-friendly table height adjustment via handwheel - Spring-loaded belt tension, automatically compensates for belt length differences - Continuously tiltable sanding unit for vertical and horizontal sanding - Equipped as standard with a rubber-coated sanding roller for internal and external sanding - Easy belt change via quick tension lever - Graphite layer on the sanding belt backing improves the gliding properties of the sanding belt - Base cabinet with tool compartment - Longitudinal fence - 1 sanding belt

Kondisi: baru, Tahun pembuatan: 2025, de2hu Kedpfxovz Hmue Aahofa

Kondisi: baru, Tahun pembuatan: 2025, en_001 Ksdpovz Hlwofx Aahsfa

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 1700 x 950 x 1260 mm Weight: 400 kg Total power requirement: 3.5 kW Edge Sanding Machine KSM-3000-S - Table size: 960 x 350 mm - Sanding belt height: 200 mm - Belt length: 3000 mm - Belt height: 200 mm - Sanding belt rear plate: 1050 x 200 mm - Oscillation stroke approx. 20 mm - Belt speed: 20 m/sec - Table stroke up to 230 mm - Oscillation motor power: 0.25 kW (0.34 HP) - Main motor power: 3.0 kW (4.0 HP) - Robust and high-quality overall construction - Veneer sanding unit with fine adjustment, contact shoe, relief rollers, and stops - Infeed ruler with grooves for veneer overhangs - Dedicated oscillation drive with geared motor - Extendable table extension with multi-roller system as standard - Sanding unit steplessly swiveling up to 45° - Round sanding table as standard - Mitre stop with Vernier angle scale - Spring-loaded belt tensioning as standard - Graphite-coated running surface - Extraction connection: 140 mm Kfsdpfxovz Hlqe Aahoa - Dimensions: L = 1700 mm, W = 950 mm, H = 1260 mm - Weight: 400 kg Scope of delivery: - Sanding belt - Veneer sanding unit - Mitre stop

Kondisi: baru, Tahun pembuatan: 2025, lbs3000specs Ksdpsvz Hlkjfx Aahefa

Kondisi: baru, Tahun pembuatan: 2025, de-hu-1 Kfsdpfx Aajvz Hk Tshja

Kondisi: baru, Tahun pembuatan: 2025, en001 Kodpfx Aovz Hk Hjahjfa

Kondisi: baru, Tahun pembuatan: 2025, de-hu-001 Ksdjvz Hkyepfx Aahsfa

Kondisi: baru, Tahun pembuatan: 2025, en-1 Ksdovz Hktopfx Aahefa

Kondisi: baru, Tahun pembuatan: 2025, Maße (L x W x H): 0 x 0 x 0 mm Weight: 850 kg Total power requirement: 5.5 kW Combination Circular Saw and Milling Machine KSF-315-2540 Circular Saw: - Cutting length / trimming length: 2400 mm - Max. saw blade diameter: 315 mm - Motor power: 4.0 kW - Scoring unit: 0.75 kW - Speed: 4000 rpm - Cutting height at 90° / 45°: 103 / 72 mm - Scoring blade diameter: 120 mm - Scoring blade speed: 8000 rpm - Max. cutting width at parallel fence: 1400 mm - Table height: 860 mm - Working table: 1450 x 650 mm - Table extension: 800 x 880 mm - Table extension (rear): 400 x 450 mm - Sliding table: 2540 x 350 mm - Outrigger table: 640 x 1200 mm - Cross-cut/miter fence length retracted/extended: 1900 mm / 3500 mm Spindle Moulder: - Spindle diameter: 30 mm - Interchangeable spindle taper: MK 4 - Motor power: 5.5 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Spindle stroke: 175 mm - Spindle tilting: 90° to 45° - Max. clamping height: 125 mm - Table opening: 270 mm - Max. tool diameter (retractable): 260 mm - Max. tool diameter above table: 260 mm - Milling fence with ALU integral fence jaws: 350 x 155 mm - Extractor sockets: 3 x 120 mm - Voltage: 400 V, 50 Hz Kfjdpfx Ajvz Hkmeahja - Packing dimensions L = 1170, W = 2000, H = 1450 mm; L = 3290, W = 325, H = 450 mm - Weight: 850 kg INCLUDES: - Central control panel at the front - Parallel fence with fine adjustment - Interchangeable milling spindle MK 4 - Scoring unit with separate motor - Integral fence jaws - Hold-down device - Edge trimming shoe

Kondisi: baru, Tahun pembuatan: 2025, en-GB_KSM-2600-specs-professional-translation Kjdpfx Ajvz Hkgjahofa

Kondisi: baru, Tahun pembuatan: 2025, de-hu-20240621-1 Kfodpfsvz Hi Nex Aahsa

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 670 x 770 x 1203 mm Weight: 142 kg Total power requirement: 1.2 kW Laser Extraction System LA-2000-IQ Suitable for filtering laser gases and dusts such as acrylic, plastic, wood, and more. Can also be used for air purification during soldering, laboratory work, etc. Performance is designed for a working area of 2000 x 2000 mm. Kfedpfx Aajvz Hi Ashea Function: The LCD display shows the airflow rate and air pressure. The airflow is adjustable. A remote control for airflow adjustment is included in the scope of delivery. The machine features a warning system to alert when a filter is blocked and needs to be replaced. The filtration of laser gases and dusts occurs in several stages. Two pre-filter stages remove coarse particles and simultaneously protect the subsequent fine dust filters from rapid saturation. The activated carbon filter purifies the air at the molecular level as the final stage, ensuring clean, breathable air. - Extraction capacity: 2000 m³/h - Filtration efficiency: >99.7% / 0.3 micron - 2 ventilators: 2 x 600 W = 1200 W - Air pressure: 4000 Pa - Noise level: =70 dB(A) - Voltage: 230 V / 50 Hz - Primary filter (coarse filter): 400 x 500 x 20 mm for particles >=5 micron - Medium filter: 500 x 600 x 300 mm for particles >=1 micron - HEPA filter: 493 x 593 x 50 mm for particles >=0.01 micron and smoke - Gas filter: 500 x 600 x 140 mm for odor and toxic gases - Hose connection diameter: 150 mm / 200 mm - Dimensions: L=670 mm, W=770 mm, H=1203 mm - Weight: 142 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 0x0x0 mm Weight: 870 kg Total Power Requirement: 5.5 kW Combination Circular Saw and Milling Machine KSF-315-3000 Kfsdpfx Asvz Hivoahsa Circular Saw: - Cutting Length / Edging Length: 2,900 mm - Max. Saw Blade Diameter: 315 mm - Motor Power: 4.0 kW - Scoring Unit: 0.75 kW - Speed: 4,000 rpm - Cutting Height 90°/45°: 103 / 72 mm - Scoring Blade Diameter: 120 mm - Scoring Blade Speed: 8,000 rpm - Max. Cutting Width at Rip Fence: 1,400 mm - Table Height: 860 mm - Work Table: 1,450 x 650 mm - Table Extension: 800 x 880 mm - Table Lengthening: 400 x 450 mm - Sliding Table: 3,000 x 350 mm - Outrigger Table: 640 x 1,200 mm - Length/Mitre Fence retracted/extended: 1,900 mm / 3,500 mm Spindle Moulder: - Spindle Diameter: 30 mm - Interchangeable Spindle MK 4 - Motor Power: 5.5 kW - Speed: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm - Spindle Stroke: 175 mm - Spindle Swivel: 90° to 45° - Max. Clamping Height: 125 mm - Table Opening: 270 mm - Max. Tool Diameter (retractable): 260 mm - Max. Tool Diameter (above table): 260 mm - Milling Fence with Aluminum Integral Fence Jaws: 350 x 155 mm - Extraction Ports: 3 x 120 mm - Voltage: 400 V, 50 Hz - Packing dimensions: L=1170, W=2000, H=1450 mm; L=3290, W=325, H=450 mm - Weight: 870 kg INCLUDES: - Central control panel at front - Rip fence with fine adjustment - Interchangeable spindle MK 4 - Scoring unit with separate motor - Integral fence jaws - Hold-down device - Edging shoe