Beli Lembaran Logam Penyimpanan bekas (36.938)

Kondisi: baru, Sheet width: 3100 mm Sheet thickness: 8.0 mm (steel) Pre-bending: 6.0 mm (steel) Top roll diameter: 230 mm Side roll diameter: 210 mm Lower roll diameter: 190 mm Total power requirement: 7.5 kW Machine weight approx.: 6,020 kg Space requirement approx.: 5142 x 1390 x 1300 mm Equipment: - Electro-hydraulic 4-roll plate rolling machine - 2x powered main rolls (top & bottom rolls) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety equipment (safety line with switch unit) - Manometer / pressure display for the rolls Nlodpfxoxabm As Al Tjh - CE mark + Declaration of Conformity - Operating manual

Kondisi: baru, Sheet width 3100 mm Sheet thickness 16.0 mm steel Pre-bending 20.0 mm steel Top roll diameter 360 mm Nlsdpfx Aexabzael Tjh Side roll diameter 250 mm Lower roll diameter 330 mm Total power requirement 15.0 kW Machine weight approx. 13,200 kg Space required approx. 5542 x 2100 x 1983 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit / display with touchscreen functionality * digital position display for both side rolls - Mobile operator console - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Pressure gauge / manometer for the rolls - CE mark + Declaration of Conformity - Operating instructions

Kondisi: baru, Sheet width 2100 mm Sheet thickness 8.0 mm steel Bending capacity 6.0 mm steel Top roll diameter 190 mm Side roll diameter 150 mm Bottom roll diameter 170 mm Total power requirement 3.0 kW Machine weight approx. 3,290 kg Space requirement approx. 4042 x 1380 x 1254 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen function Njdpfx Alsxab E Ee Tolh * Digital position display for the two side rolls - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cord with switch unit) - Manometer / pressure display for the rolls - CE mark + declaration of conformity - Operating manual

Kondisi: baru, Sheet width 4100 mm Sheet thickness 8.0 mm steel Pre-bending 6.0 mm steel Top roller diameter 300 mm Side roller diameter 210 mm Lower roller diameter 270 mm Total power requirement 7.5 kW Machine weight approx. 9,930 kg Required space approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & lower roll) - with hydraulic cone bending device - Induction-hardened rolls - including straightening function for welded pipes - Control unit/display with touchscreen function * digital position display for both side rolls - mobile operator panel - 2x selectable bending speeds - hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Manometer/pressure gauge for the rolls Nsdpfx Aloxab Tce Telh - CE marking + Declaration of Conformity - Operating manual

Kondisi: baru, Sheet width 4100 mm Sheet thickness 13.0 mm steel Pre-bending 10.0 mm steel Top roll diameter 360 mm Side roll diameter 250 mm Lower roll diameter 330 mm Total power requirement 11.0 kW Machine weight approx. 16,000 kg Space requirement approx. 6542 x 1677 x 1900 mm Equipment/features: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & lower roll) - With hydraulic cone bending device - Induction hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen function Nlsdpfx Ajxabuysl Tsh * Digital position indicators for both side rolls - Movable control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rolls - CE marking + Declaration of Conformity - Operating manual

Kondisi: baru, Sheet width 2600 mm Sheet thickness 10.0 mm Bending capacity 8.0 mm Top roll diameter 230 mm Side roll diameter 190 mm Lower roll diameter 210 mm Total power requirement 7.5 kW Machine weight approx. 5,560 kg Dimensions (L x W x H): 4,650 x 1,380 x 1,300 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Including alignment function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end - Safety equipment (safety rope with switch unit) Nljdpfx Aexaalqol Tsh - Manometer / pressure gauge for the rolls - CE mark + declaration of conformity - Operating manual

Kondisi: baru, Lebar pelat 1550 mm Ketebalan pelat 4,5 mm Pembengkokan 4,0 mm Panjang rol 1550 mm Diameter terkecil sekitar 190 mm Diameter rol – bagian atas 140 mm Kecepatan pembengkokan 3,0 m/menit Daya motor 2,2 kW Berat 1420 kg Dimensi P-L-T 2700 x 750 x 1000 mm Peralatan: - mesin pembengkokan bundar elektromekanis yang kokoh - 2x rol sentral yang digerakkan oleh motor listrik (rol atas & bawah) - rol atas dapat diputar secara manual, dengan bantalan lipat - termasuk perangkat pembengkokan kerucut - panel kontrol yang dapat bergerak bebas - rol bawah dapat disesuaikan secara manual, melalui roda tangan Nsdpfx Alezkbn Is Tolh - susunan rol asimetris - motor utama dengan pengereman otomatis - perangkat keselamatan (tali pengaman dengan unit sakelar) - Tanda CE/Deklarasi kesesuaian Peralatan tambahan yang termasuk dalam harga: - rol yang diperkeras - penyesuaian rol samping motorik - tampilan posisi digital untuk rol samping yang dapat disesuaikan secara motorik

Kondisi: bekas, Carrier claw, plate clamp, sheet metal clamp, beam clamp, sheet metal grab, material grab, material gripper, profile steel tongs, plate gripper, lifting clamp, lifting clamp -Manufacturer: ip, Safety Lifting Clamp Type IPUZ with swiveling lifting ring -Clamping range: 0 - 25 mm Nodpfx Aljkm Rnyj Tslh -Load capacity: 3 t -Quantity: 1x clamp available -Price: per piece -Dimensions: 230/90/H380 mm -Weight: 16 kg/unit.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Edges and contours - deburring machine ROLEI type: 00645-KKE2, year 2011. Nledpfx Alswnpflj Tjh

Kondisi: baru, dehu-01 Njdsyv I Ubspfx Al Tjlh

Kondisi: baru, de-blchwlz6sk140120-2024 Njdpfeyv N E Uex Al Telh

Kondisi: bekas, Beam clamp, sheet clamp, plate clamp, girder clamp, sheet metal gripper, material gripper, slab gripper, lifting clamp, lifting clip, lifting clamp, crane clamp, roller clamp Nodpsir E Thofx Al Tolh -Manufacturer: VEB TAKRAF, Roller Clamp Type WSI -Clamping range: 35-70 mm -Lifting capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Kondisi: baru, de-001 Nledpfx Alsyvvn Aj Toh

Kondisi: baru, Blechbreite 3100 mm Blechstärke 16 mm Anbiegung 13 mm Oberwalzendurchmesser 330 mm Unterwalzendurchmesser 300 mm Seitenwalzendurchmesser 240 mm Gesamtleistungsbedarf 11 kW Maschinenabmessungen 5600x1650x1900 mm Maschinengewicht ca. 10.600 kg Zubehör/Ausstattung: - Konischbiegeeinrichtung - induktionsgehärtete Walzen - digitale Anzeige für Seitenwalzen - Maschine aus Stahlkonstruktion - Separates Steuerpult - zwei Geschwindigkeiten - alle Walzen auf Kugellager - Klapp- und Stützlager von der Oberwalze wird vom Steuerpult aus betätigt. Njdpfx Asyv I Smel Tslh Wenn das Klapplager geöffnet wird, fährt die Walze automatisch nach oben. - konische Einstellung der Walzen über Steuerpult - Zentralwalzen werden über Hydraulikmotor und Umlaufuntersetzungsgetriebe angetrieben. (Ober- und Unterwalzen) - Kalibration

Kondisi: baru, blechwalze-313-hs-2024-06 Nsdpfx Alsyv Nh No Tslh

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Nledpot Hw Iisfx Al Teh Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2026, panjang total: 1.450 mm, lebar total: 800 mm, tinggi total: 1.800 mm, berat keseluruhan: 500 kg, daya: 4,75 kW (6,46 hp), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush band dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush band speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Nledjt D D Nzepfx Al Teh Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Kondisi: baru, blechbreite_1050mm_2024 Nledpoyv Nfbsfx Al Teh

Kondisi: baik (bekas), EN: Carrier claw, sheet metal clamp, plate clamp, beam clamp, sheet metal gripper, material gripper, material clamp, section steel tongs, plate lifter, lifting claw, lifting clamp Nlsdpfx Alelu N Ede Tjh -Manufacturer: ip, Safety Lifting Clamp Type IP N with swiveling lifting shackle -Clamping range: 0-40 mm -Lifting capacity: 6 t -Quantity: 6 clamps available -Price: per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/unit

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, panjang total: 10.000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic cutting by rotating tool (rotalme) - Double set of hydraulic clamps for sheet metal holding (short and long) Nljdpfxswnyu Ds Al Tsh Upper beam with water-folding slot, oil filling, fastening and leveling hardware, emergency stop rail along the entire length of the machine, emergency stop drive integrated in foot pedal for upper beam and folding beam, second pedal for two-person operation, upper beam safety device, 2 short-piece holding fingers. The machine will be overhauled, serviced and cleaned by a specialist and is delivered fully operational. A function test will be carried out. Sheet width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Stainless steel sheet thickness: 1.5 mm Back gauge width: 150 - 1,150 mm Color: light blue/light grey Total connected load: 400 V Required space: 12,500 x (2,367 x 700) + fence 2,070 mm Insertion depth: 1,150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/s Number of uprights: 8 units Number of clamping jaws: 8 Bending angle: 145 degrees

Kondisi: baru, Tahun pembuatan: 2025, SHEET METAL BENDING MACHINE MODEL ZGDS-125 WORKING LENGTH: 1250 MM ALL THREE ROLLER ROWS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENDABLE STEEL SHEET: 0.7 MM Nlsdpfohwztwox Al Teh MACHINE WEIGHT: 125 KG.

Kondisi: baru, Tahun pembuatan: 2025, SHEET METAL BENDING MACHINE MODEL ZGDS-70 WORKING LENGTH: 700 MM ALL THREE ROLLER ROWS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENT STEEL SHEET: 1.0 MM MACHINE WEIGHT: 70 KG. Nlsdpfx Aohwztpsl Tjh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, ketebalan lembaran (maks.): 2 mm, ketebalan pelat baja (maks.): 2 mm, lebar kerja: 1.850 mm, jangkauan kerja: 1.850 mm, 1 Usata pannellatrice automatica Salvagnini CNC in vendita (piegatrice CNC) Modello: P4.1812 pannellatrice servoassistita LS Lama superiore di piegatura LI Lama inferiore di piegatura MLA.ZR Regolazione manuale della lunghezza pressore CLA Unità di piegatura per lembi lunghi HP12015 R81 Refrigeratore Lunghezza massima in ingresso: 1850 mm Larghezza massima in ingresso: 1500 mm Lunghezza minima in ingresso: 285 mm Larghezza minima in ingresso: 190 mm Diagonale massima: 2150 mm Larghezza massima in uscita: 1500 mm Nodpswb E Uvsfx Al Telh Dimensione massima di riferimento: 2000 mm Spessore minimo lamiera: S min: 0,50 mm Spessore massimo lamiera, Acciaio al carbonio (max. 410 N/mm2): Max: 2,00 mm Spessore massimo lamiera, Acciaio inox (max. 600 N/mm2): Max: 1,25 mm Lavorazione di materiale preverniciato Smax= 3,00 mm Lunghezza massima utensile per opzione CLA: 1000 mm

Kondisi: baru, condition: new delivery time: approx. 12 weeks from order country of origin: Italy price: €153,200 leasing rate: €2,895.48 working width: 1,350 mm sheet thickness range – mild steel: 0.4 – 120 mm abrasive belt dimensions: 1,370 x 2,200 mm extraction capacity: 6,000 m³/h extraction connection diameter: 150 mm compressed air connection: 6 bar length: 4,200 mm width: 2,300 mm height: 2,350 mm weight: 4,200 kg EQUIPPED WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE * The machine is constructed of welded and normalized steel to ensure a stable and rigid structure. * Working table with motorized height adjustment, made possible by the synchronized movement of 4 screws. * Independent motors arranged inside the structure with emergency brakes. * Dust extraction hoods located inside the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal tolerance * Thickness adjustment with control (+/- 0.1 mm) * Alarm monitoring center with instant visualization of emergencies and/or faults. FEED UNIT * Table made of solid metal construction with ground and wear-resistant sliding surface. * Modified structures for vacuum systems available on request * The table raises and lowers from 780 mm up to a maximum height of 950 mm above the floor. The motor power for table height adjustment is 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed with inverter, from 0.4 to 4.5 m/min; option of 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil and heat resistant, with automatic centering system. * Side guides that prevent the conveyor belt from lifting. * Rubberized pressure rollers, oil and heat resistant, installed before and after each working group. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Feed speed control via the main touchscreen. 1ST GRINDING UNIT WITH ABRASIVE BELT * Precision-ground and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing the working position to be controlled and compensating for abrasive belt wear over an 8 mm range. This system is managed by a pneumatic cylinder, which enables the automatic engagement of the unit for operation and, in case of emergency and/or machine stop, the immediate withdrawal of the belt from the working area. It is possible to use both abrasive belts and/or Scotch Brite. * Pneumatic On/Off switch. * Roller adjustment (up/down) “grit” stroke 10 mm * Variable speed motor 11 kW, with automatic braking in case of emergency. * Rotation speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system; LED display for wear monitoring. * Abrasive belt centering system, with electronic photo eye display, adjustable for amplitude and intensity of oscillation. 2ND ROTARY BRUSH UNIT Nedpfx Ajynmw Rsl Tolh * Comprising 8 deburring brushes: 4 clockwise, 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Kondisi: bekas, Carrier clamp, plate clamp, sheet clamp, girder clamp, plate lifter, material grab, material lifter, profile steel tongs, plate grab Nsdpogtn Diofx Al Tolh - Sheet clamp: Clamping range up to 35 mm - Load capacity: 4 t - Dimensions: 230/110/H450 mm - Weight: 22 kg