Beli Lengan Ayunan bekas (1.612)

Kondisi: sangat baik (bekas), jarak tempuh: 890.895 km, daya: 338 kW (459,55 hp), pendaftaran pertama: 02/2010, jenis bahan bakar: diesel, ukuran ban: 385/65 R22,5, konfigurasi gandar: 6x2, jarak roda: 6.000 mm, bahan bakar: diesel, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: udara, jumlah tempat duduk: 2, panjang total: 8.450 mm, lebar total: 2.510 mm, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 11.500 kg, beban gandar yang diizinkan (gandar 3): 7.500 kg, Tahun pembuatan: 2010, Perlengkapan: ABS, kemudi berkuasa, kendali jelajah, kopling trailer, pendingin udara, pengaturan jendela elektrik, spoiler,

Kondisi: bekas, ä3626 Fjdpfx Asyrq Nljm Sogc

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) Fgedpfx Amsnwmwve Soc You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: baru, Tahun pembuatan: 2020, Single-sided cantilever rack, 6.30 m height, 1.20 m arms, 900 kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided uprights approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm, each with 3 height-adjustable arms - Load capacity with 600 mm load center: 900 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 900 kg = 3,600 kg - Profiles: Frame: IPE220, Arms: IPE100 - With longitudinal and diagonal bracing (center distance = 1,300 mm, standard is 1.30 m) - Other standard bay lengths available from stock: 1.00 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - From 1.50 m length onwards, a small surcharge applies to the stated price - Custom dimensions (other bay widths) are available on request, but incur an additional charge and have a longer delivery time as they are custom manufactured. - If you do not specify a different bay width, the rack will be delivered with a 1.30 m bay width. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4 m. - Delivery includes all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Fgjdpfx Aofivg Sjm Ssc Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New stock - : Price ex works including loading! 1 racking unit with 4 uprights: €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! You can also create longer or shorter racking units by omitting or purchasing additional uprights (or by adjusting the spacing between the uprights). The example with 4 uprights represents the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - Single-sided racking uprights, approx. 6,300 mm high, hot-dip galvanized - Base and arm depth 1,200 mm with three height-adjustable arms per upright - Load capacity at 600 mm load center: 500 kg per arm / 4,000 kg per upright - With 4 uprights per arm level: 4 x 500 kg = 2,000 kg - Profiles: Uprights: IPE220, Arms: IPE 80 - With longitudinal and diagonal braces, center-to-center distance = 1,300 mm. Standard measurement is 1.30m. - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m length, there is a small surcharge on the stated price! - Custom dimensions (other center-to-center distances) available on request, subject to surcharge and longer delivery times due to special fabrication! - Unless otherwise specified, we supply the racking with a center distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel direct from Würth), without floor anchors. Fjdefivg Rspfx Am Segc Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 1988, Kondisi: baik (bekas), Load capacity: 10 t Fgodpfx Ajlimtvsm Ssc Arm length: 1,400 mm Arm diameter: 300 mm Coil diameter, external: max. 1,300 mm

Tahun pembuatan: 1988, Kondisi: baik (bekas), Load capacity: 10 t Arm length: 1,400 mm Arm diameter: 300 mm Coil diameter, external: max. 1,300 mm Fgedjrryyopfx Am Sjc

Kondisi: baik (bekas), Tahun pembuatan: 2019, Warehouse building consisting of cantilever and pallet racks, manufacturer OHRA, footprint approx. 867 m² – used - : Price ex location: €99,500 (net), for self-disassembly! Disassembly service available for an additional charge upon request. Material to close one gable end is also available at extra cost! Manufacturer: OHRA Year of construction: 2019, sheet metal 2021 Building dimensions: Width: approx. 17.35 m Fgjdpfx Amjyk H Rie Ssc Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one of the long sides of the building will be open (currently where it adjoins the existing hall) Cantilever rack: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Upright load per side: 4,200 kg Axis spacing: 2 m Arms are bolted on Arms with anti-roll-off device, system for securing loads Including pallet beams Ground level plus 3 arm levels per side Total depth: 2.70 m (2x 1.20 m + 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet rack: Manufacturer: OHRA P3 pallet racking system Year: 2019 Bay width: 2,900 mm, four bays at 2.40 m length Load per level: 2,000 kg Load per bay: 6,000 kg Top edge 1st level (buckling length): 800 mm 1 row with 17 frames, 1 row with 19 frames (at two locations with pipes) Total number of frames: 36 Rack length: approx. 48.10 m Frame depth: 1.10 m Frame width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (bearing surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pieces at 2.90 m, approx. 24 pieces at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Wind zone: 1 / terrain category 0.48 kN/m² Available: immediately Condition: good, slight rust on some outer frames and faded paint Location: Hockenheim area Drawings available as PDF, itemized list, structural analysis. The sideloader shown in the pictures is also for sale for an additional charge (recently fitted with a nearly new battery, cost approx. €9,600 (net)).

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Fedpfsddmq Tox Am Ssgc Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Surcharge for cantilever arms with guardrails for this rack: €40 Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg Fsdpfxjddmqnj Am Ssgc With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Fgsdpfx Ajddmtcom Sjc Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 Fsdpfx Ajddmtqom Ssgc - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Fodpfjddmp Asx Am Sjgc Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Fgedpfeddmp Usx Am Sec Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m Fgjdsddmqyjpfx Am Soc • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side Fjdpfx Amjddmr No Ssgc - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Kondisi: baik (bekas), Maximaler Sägeblattdurchmesser: 400 mm Maximaler Sägeblattüberstand: 133 mm Kappschnittkapazität 90°: 340 x 133 mm Kappschnittkapazität 45°: 290 x 133 mm Arbeitstischhöhe: 813 mm Motorleistung: 4,5 kW Fjdorl Sknspfx Am Sjgc Spindeldrehzahl: 3000 U/min Rückholfeder für Sägeeinheit DC-Bremsung

Kondisi: sangat baik (bekas), jarak tempuh: 657.514 km, daya: 346 kW (470,43 hp), pendaftaran pertama: 03/2019, jenis bahan bakar: diesel, ukuran ban: 385/65 x 22,5, konfigurasi gandar: 6x2, jarak roda: 6.570 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 600 l, rem: retarder, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 9.300 mm, lebar total: 2.550 mm, beban gandar yang diizinkan (gandar 1): 10.000 kg, beban gandar yang diizinkan (gandar 2): 11.500 kg, beban gandar yang diizinkan (gandar 3): 7.500 kg, Tahun pembuatan: 2019, Perlengkapan: ABS, AdBlue, Android Auto, Bluetooth, bantuan mulai menanjak, filter jelaga, kendali jelajah, komputer bawaan, kopling trailer, kunci diferensial, kunci sentral, lampu kabut, pemanas jok, pemanas parkir, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), retarder, sistem navigasi, spoiler,

Kondisi: sangat baik (bekas), jarak tempuh: 245.806 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 07/2022, jenis bahan bakar: diesel, ukuran ban: 385/65/22,5, konfigurasi gandar: 6x2, jarak roda: 4.800 mm, bahan bakar: diesel, rem: pengereman mesin, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: udara, beban gandar yang diizinkan (gandar 1): 8.000 kg, beban gandar yang diizinkan (gandar 2): 11.500 kg, beban gandar yang diizinkan (gandar 3): 7.500 kg, Tahun pembuatan: 2022, Perlengkapan: ABS, AdBlue, filter jelaga, kendali jelajah, kopling trailer, kunci diferensial, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, tangki bahan bakar kedua,

Kondisi: bekas, Tahun pembuatan: 2014,

Kondisi: bekas, Mesin Bor Radial WEBO Tipe R4bR No. Seri: 15 / E195 Tahun Pembuatan: sekitar 1965 Kapasitas bor: 50 mm Kuncup Spindel: MK 5 Jangkauan maksimum spindel: sekitar 1250 mm (hingga kolom) Luas meja: 1400 x 1000 mm Diameter kolom: 315 mm Kecepatan spindel: 30 - 1325 rpm, 9 langkah Fodsu T Ty Hepfx Am Sogc Feeding: 0,12 - 2 mm/putaran, 9 langkah Koneksi listrik: 380 Volt, 50 Hz - Kecepatan spindel dalam 9 langkah - Penyesuaian ketinggian lengan secara motorik Ruang yang dibutuhkan untuk operasi: P x L x T 220 x 100 x 285 cm Ukuran untuk transportasi: P x L x T 220 x 100 x 260 cm (tanpa motor untuk penyesuaian ketinggian) Berat: sekitar 2,8 ton.

Kondisi: bekas, 2-axis linear guide with linear motors – Slide Arm Pick and Place with linear guides for automation Fsdpfxou H R Iwj Am Sjgc Loading unit similar to SCARA robots, manipulators, handling devices, handling systems, pick & place grippers, loading grippers for automation Manufacturer: SCHUNK – GEMOTEC – AFAG – LINMOT Type: PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of manufacture: approx. 2005 Horizontal axis with Gemotec linear motor, type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal travel: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeatability: +/- 0.05 mm Horizontal load capacity: max. 7000 g Guide column horizontal: Ø 20 mm Vertical axis with LinMot linear motor, type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical travel: 160 mm Nominal vertical force: 44 N Max. vertical force: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeatability: +/- 0.05 mm Guide column vertical: Ø 20 mm Power supply: LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame support columns: 4 pcs Ø 55 mm Support columns height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Travel possible in two axes - Mounting plate for tool holder: 66 x 56 mm - Integrated position measuring system - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Required space L x W x H: 1120 x 720 x 740 mm Net weight: approx. 65 kg Very good condition.

Kondisi: bekas, Oscillating Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table, Indexing Table with SIEMENS Control Machine No. P 81 - 5458 Year of Manufacture: 1982 / 2009 Maximum Rivet Shank Diameter: 12 mm Tool Shank Diameter: 16 mm Throat Depth: 190 mm Rivet Head Stroke per Riveting Unit: approx. 60 mm Rivet Spindle Speed: approx. 1400 rpm Installation Height Tool - Counter Tool: max. 80 mm Compressed Air Requirement: 6 bar Motor Power per Riveting Unit: 1.1 kW Power Supply: 380 Volt, 50 Hz - Rotary Table, Indexing Table with Servo Drive, step size programmable via Siemens PLC control Fgedpfx Aodzp T Njm Soc - Double riveting unit adjustable within the machine frame relative to the rotary table - Table diameter Ø 295 mm for accepting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning by adjustable microswitch - Control system modernized and conversion to servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – year 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the counter-rotating riveting units: 0-60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segmental saw blades from Ø 400 to Ø 2000 mm. The segments were manually positioned onto the carrier disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table rotates automatically to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for constructing a special-purpose machine.

Kondisi: bekas, Mesin tekuk ayun dengan perkakas atas segmen tambahan, rel kaki angsa Mesin tekuk ayun FASTI tipe 2095-25-2,5 No. Seri: 94 295 004 Tahun pembuatan: 1994 Panjang kerja: 2540 mm Ketebalan pelat maks.: 2,5 mm Fodpsttc Uajfx Am Ssgc Stroke rahang atas: 380 mm Daya motor rel tekuk: 2,2 kW Koneksi listrik: 400 Volt, 50 Hz - Kontrol NC FASTImatic FM100 - Rel ujung runcing satu bagian 135° - Perkakas atas segmen tambahan, rel kaki angsa - Penahan belakang terkontrol - Rel penahan kontinu - Sudut tekuk dikendalikan melalui kontrol - Sakelar pedal kaki elektrik Berat: 3000 kg Kondisi baik

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 06/2027, berat keseluruhan: 385 kg, lebar total: 960 mm, panjang total: 950 mm, frekuensi input: 50 Hz, sekring listrik: 16 A, Kemper F 75 SL pengaduk spiral Adonan mixer dengan 2 kecepatan Tutup pelindung debu tepung Fodpfx Amsy Srtaj Ssgc Bowl dan lengan pengaduk dari stainless steel Mesin dapat dipindahkan Hanya di tempat kami diperiksa DGUV V3 Koneksi 400V, steker 16A-CEE Dimensi: 960 x 950 x 900/1840 mm, PxLxT Mesin bekas