Beli Martin Transline 1228 bekas (82)

Kondisi: baru, Tahun pembuatan: 2025, EN-001 Dkedpfx Acepq If Djvoi

Kondisi: baru, Tahun pembuatan: 2025, Martin sliding table saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1,350 mm Rip fence adjustable via handwheel Djdpsv Erkajfx Acvoki Standard cross-cut table with length stop for angled cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1,350 mm T 6641-a Rip fence adjustable via handwheel T6660/1-a Standard cross-cut table for angled cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex stock 54634 Bitburg - Immediately available - Some images may show options that are not included in the offer.

Kondisi: baru, Tahun pembuatan: 2025, Martin panel saw T 77 - new stock machine - Top equipment - Double-sided tilting - Equipment: T 7710/2-a Saw unit Prex - double-sided tilting T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Rip fence table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer lighting Safe Light Dodpfxjw D T Dko Acveki T777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T7704/2-a ConnectPad 12.9" / 13" T7704/20-a OtterBox Defender Case T7706/1-a ConnectApp at Classic control level Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Martin spindle moulder T 27 Flex - tiltable on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not so with the T27 Flex and its modern touchscreen control: Thanks to the integrated tool compensation, you can set up even complex milling patterns with a tilted spindle in no time at all. This is the only way to utilize the large tilt range of 2 x 46° efficiently—allowing you to fully follow your requirements. Furthermore, the machine can be precisely adapted to the individual needs of your operation. Features: T 27 Flex T 2711-a Digital display of infeed jaw position in the control system T 2731-a Table extensions on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock spindle fence clamping system Dedpfx Acsr Hr D Njveki T 2790-La Console for feed unit mounting, left side The photo shows a sample machine only / Feed unit and support are not included Included accessories are listed in the text above Location: Incoming to stock 54634 Bitburg - Available in two weeks -

Kondisi: baru, Tahun pembuatan: 2025, Martin Dickenhobelmaschine T 45 with Tersa Cutterhead Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production. It produces smoothly planed surfaces, is quick and easy to operate, and also works extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions—your first workpiece already comes out perfectly set. Naturally, the thickness table is adjusted easily at the press of a button, or can be stepped up in 0.1 mm increments. The feed controls are conveniently placed. The heavy, vibration-damping composite frame, together with the high-quality cutterblock bearings, guarantee immaculate surface results. Its sound-insulated construction ensures a quiet working environment even in the standard configuration. • Planing width: 630 mm • Weight: approx. 1,200–1,400 kg • Planing height: 2.8–300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, max. 99 values storable (49 programmable for custom planing sequences); buttons for rapid and fine manual thickness adjustments with digital readout; push-buttons for cutterhead start/stop; built-in hour counter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; includes locking mechanism for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, table supported by 4 anti-tilt threaded spindles, finely planed table surface • Feed: Two speeds (6 / 12 m/min), electrically switchable during operation, large rubber feed rollers Ø 85 mm to compensate for varying material thickness, soft and self-cleaning rollers, easy roller replacement; segmented pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left/right (optional dual connection); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; bearings/cutterhead lubricated via grease fittings • Included accessories: 1 grease gun (filled with long-life grease), 1 oil can, 1 open-end wrench, 1 knife changing tool, 1 pair dummy knives 640 mm, 2 pairs TERSA reversible knives 640 mm CV • Emissions: - Sound pressure at operator position LpA as per DIN EN ISO 11202 [dB(A)] - Idle (without extraction) P1: 65 Dodpfsqlclbsx Acveki - Idle (with extraction) P1: 77 - Working (without extraction) P2: 65 - Working (with extraction) P2: 78 - Sound power level LWA as per DIN EN ISO 3746 [dB(A)] - Idle (without extraction): 84 - Working (with extraction): 90 • Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Router Meja MARTIN T21 - bekas - pagar frais yang dapat diatur dengan presisi, putaran kanan/kiri ----- Data Teknis ----- Ukuran meja: 1.000 x 930 mm, diameter spindle: 30 mm, pengaturan ketinggian: 150 mm, kecepatan: 3.000/4.500/6.000/9.000 rpm, diameter port ekstraksi: 120 mm, Dsdpfow Nv Nljx Acvjki berat: 630 kg

Kondisi: bekas, MARTIN Spindle Moulder - used - Precision-adjustable fence, Reversible spindle rotation (right/left) ----- Technical Data ----- Table size: 1,000 x 930 mm Working table height: 860 mm Djdpfx Asu R Td Nocvoki Spindle diameter: 40 mm Usable spindle length: 160 mm Max. cutter diameter: 255 mm Max. retractable cutter diameter: 255 mm Height adjustment: 150 mm Speeds: 3,000/4,500/6,000/9,000 rpm Motor: 4.7/5.7 kW Extraction port diameter: 120 mm Dimensions (LxWxH): 1,000 x 930 x 1,050 mm

Kondisi: bekas, Serut MARTIN T51 - bekas - bibir meja kedap suara, bilah pembatas, rem motor ----- Data teknis ----- Lebar pemotongan: 51 mm, Panjang meja: 2.520 mm, Kedalaman serut maksimum: 16 mm, Diameter as pemotong: 120 mm, Jumlah pisau: 2 pcs, Rentang putar pembatas: 0-45°, Port ekstraksi: 140 mm, Daya motor: 4,8 kW Dkodoxm R Upspfx Acvsi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, Mesin Planer Empat Sisi Martin T 90 Mesin telah direkondisi total Dkedpfx Acsx Tgu Ievoi Tahun: 2004 Spesifikasi: Lebar kerja: 260 x 160mm Kecepatan poros: 6000 RPM Poros pisau Tersa 56 ampere 6 bar

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Perlengkapan dan data teknis: - Kondisi: terawat Dkedpfjx Enq Iex Acvoi - Naik/turun dan miring 0-45° dengan pedal kaki hidrolik - Dengan pengangkatan halus dan cepat, semuanya bebas perawatan - Dengan tampilan digital pada penggaris gergaji bundar untuk lebar potong - Dengan pengaturan sudut tetap pada penahan panjang untuk 75/67,5/60/45 derajat - Ketinggian potong: 145 mm - Lebar potong: 1050 mm - Panjang potong: 3300 mm - Kecepatan putar: 2800-4000-5500 rpm - Motor: 5,5 kW - Dengan unit skor Ketersediaan: segera Lokasi: Röllbach

Kondisi: sangat baik (bekas), el01 Dkjdpfsx E N Uzsx Acvji

Kondisi: sangat baik (bekas), Main motor power 3.4 / 4.5 kW Feed motor power (3 rollers) 0.7 kW Spindle diameter 30 mm Trolley reach 170 cm Very good condition. Dkedpeg Etw Iofx Acvoi

Kondisi: bekas, panjang total: 2.700 mm, lebar total: 2.220 mm, tinggi total: 1.500 mm, de-hu-001 Dodpfx Acjwnh S Dsveki

Kondisi: bekas, Daftar ini untuk Hulme Martin 10/3319 Heat Sealer. Unit dalam kondisi kerja penuh dan siap untuk segera digunakan. Dkjdoxuiv Ispfx Acvsi Ini merupakan mesin seal panas impuls (untuk pengelasan film termoplastik sejenis), mesin seal panas konstan (untuk bahan laminasi atau foil), mesin vacuum sealer, beserta perlengkapan tambahan lainnya. Dirancang untuk daya tahan (lebih dari 20 tahun penggunaan menurut pemasaran mereka) dan kemudahan servis melalui batang pemanas plug-in serta suku cadang terjangkau.

Kondisi: bekas, Daftar ini untuk Hulme Martin 3151 Heat Sealer. Unit dalam kondisi kerja penuh dan siap digunakan segera. Dodpfx Aoxhgc Eocvski Model ini dilengkapi dengan Kontrol Elektronik Pendingin dan Pemanas.

Kondisi: sangat baik (bekas), L&Z Mesin Bubut Merek: Martin Tipe: KM 200 Dkodexyw Rkspfx Acvoi Diameter putar maksimal: 200 mm Panjang putar maksimal: 1100 mm Chuck Forkhardt F 250 Pemegang alat Multifix B 12 kecepatan putaran dari 31,5 hingga 1400 rpm Senter ekor MK 4 Panjang: 2500 mm Lebar: 950 mm Tinggi: 1250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, lebar kerja: 2.800 mm,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: V 435496, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 170 mm, lebar pemotongan (maks.): 1.100 mm, panjang pemotongan (maks.): 3.700 mm, hentian panjang: 3.200 mm, Perlengkapan: doser, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Panjang potong (maks.): 3.700 mm Lebar potong (maks.): 1.100 mm Lebar potong pada pagar paralel: 1.100 mm Tinggi potong (maks.): 170 mm Tinggi potong dengan scoring unit (maks.): 170 mm Diameter mata gergaji: 450 mm Batas panjang: 3.200 mm Panjang meja geser: 3.700 mm Lebar meja geser: 450 mm DETAIL MESIN Berat total: 1.800 kg Tegangan sambungan: 7,5 kW (10,20 HP) Diameter soket hisap: 120 mm PERLENGKAPAN Rem motor Scoring unit Dksdpsx Dkp Iefx Acvsi Meja silang digital Para Batas panjang digital Scoring unit elektrik 3-sumbu Lengan penutup yang dapat digeser 400 mm Panjang pemotongan 3,70 m Indikator garis potong laser Penahan template Penggaris gergaji bundar pneumatik yang dapat dilipat Penahan kedua

Kondisi: sangat baik (bekas), Motor 5,5 kW Schnitthöhe 9 cm Tischlänge 330 cm Durchlass 100 cm Dodpfx Ajwtl Ndjcvski Vorrichtung für Vorritzsäge Schnittwinkel- und -höhe hydraulisch einstellbar

Kondisi: bekas, Tahun pembuatan: 2004, Perangkat dalam kondisi kerja. Dkodpfx Acsw Tbfgovsi

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 18059, Centre height: 250 mm Centre distance: approx. 1740 mm Swing diameter over bed: 500 mm Spindle bore: 63 mm Spindle mount: Size 6 Tailstock taper: 5 MT Spindle speeds: 170 – 2240 rpm Feeds: longitudinal/cross 0.014–1/0.0063–0.45 mm/rev Thread pitches: 0.1 – 112 mm Electrical connection: 380 V, 7.5 kW Required space: 3370 x 1000 x 1400 mm Dkodpfx Ajidiq Aocvsi Weight: 2360 kg

Kondisi: bekas, Tahun pembuatan: 1967, Centre height: 300 mm Distance between centres: 1000 mm Swing diameter over bed: 610 mm Spindle bore: 71 mm Dkjdpevzn E Sjfx Acvei Spindle mount: Size 8 Tailstock taper: 5 MT Spindle speeds: approx. 11.2 – 1800 rpm Feeds: longitudinal/cross 0.014–16 / 0.063–7 mm/rev Thread pitches: 0.1 – 112 mm Electrical connection: 380 V, approx. 5.5 kW Required space: 2900 x 1450 x 1750 mm

Kondisi: hampir baru (bekas), 40 mm milling arbor for Martin tilting spindle moulder T27 Dodpjwnm U Rsfx Acveki Clamping length: 160 mm, arbor diameter: 40 mm. Equipped with quick-release nut. From stock, apparently unused to date. This milling arbor is only compatible with the T27, not the T26. The machine can be demonstrated on our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see “more offers from this provider.”

Kondisi: hampir baru (bekas), Martin quick-action clamping nut for 40mm milling arbor. From stock inventory, apparently unused so far. The quick-action clamping nut is used for the T27. Dksdpownnausfx Acvji The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see 'Further offers from this supplier.'

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, I am selling a sliding table panel saw with scoring unit Manufacturer: OTTO MARTIN Model: T60 Classic Year of manufacture: 2007 Cutting length: 3200 mm Cutting width: 1250 mm (option) Max. cutting height: 130 mm (saw blade diameter 400 mm) Saw blade and scorer tilt: 0–46°, digitally adjustable Saw blade and scorer height adjustment: digital Digital display for rip fence and working height Activation of main saw blade and scoring unit from control panel Dodpfjtmwn Hox Acveki Main motor for panel saw: 5.5 kW (7.5 HP) (speed adjustable: 4000/4800/6000 rpm) Scoring unit motor for panel saw Tools, options, and accessories shown in the pictures are included in the price. Very good condition. Available immediately. Including complete documentation and CE certificate.