Putar spindle milling machine - tersedia segera -

Martin T 27 Flex

Kondisi: baru, Tahun pembuatan: 2026, Untuk penentuan jumlah lem yang profesional dan presisi pada lubang bor dowel dan alur dinding belakang. Ringkasan: • Jumlah lem yang selalu sama dan benar • Tidak memerlukan pembersihan sisa lem berlebih pada benda kerja • Pembersihan sistem lem yang paling mudah dan minimal (sekali seminggu melalui program bilas) Pjdodxz Tpepfx An Iora • Penghematan biaya lem • Pistol lem ergonomis dan ringan dibandingkan dengan botol lem • Pekerjaan lebih cepat dan lebih akurat dibandingkan dengan botol lem

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level. Psdpoqt Dmyofx An Iora

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Prjdpofpb Nmsfx An Ioa Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: baru, Table size 2500 x 780 mm Motor power 7.5 kW Spindle diameter as required mm Speed(s) 1,500 - 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L ---- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta start spindle motor. Touchscreen, tool management, and program control based on Windows operating system Milling fence including controlled parallel adjustment (1st axis), handwheel adjustment with numeric display for the front fence jaw, electric swing-away device for the complete fence, quick-release lever for fixation, aluminum fence jaws, and pressure device Controlled electromechanical spindle height adjustment (2nd axis) Controlled electromechanical spindle tilt adjustment (3rd axis): -45° to +45° Table insert adjustable to milling tool diameter (instead of table rings), Table insert is motorized (4th axis) Milling speeds: 1,500/3,000/4,500/6,000/8,000/10,000 rpm (displayed via touchscreen) Electrics and safety devices according to CE standards Prsdpfx Aoxpi D Isn Ioa Table dimensions: 1,200 x 780 mm Max. tool size under table: d = 320 mm, H = 50 mm Motor: 7.5 kW / 10 HP / 50 Hz “L” version with table extensions on both sides and pull-out workpiece support with emergency stop button Right-left rotation according to CE Curved milling fence Option at extra cost: 4-roller feed unit Type VSA 2048 L Consistent feed speed without loss of power Right and left operation Including stand, individually tiltable and adjustable for horizontal and vertical operation Eight speeds possible, speed selection via switch and change gearbox Surcharge: 1,149.00 Euro Freight costs, including installation and 4 hours of training: Surcharge: 1,400.00 Euro (technical data as per manufacturer - no guarantee)

Kondisi: baru, Tahun pembuatan: 2026, Construction size: 5 Rated thermal output: 145 kW -- BImSchV Stage 2 and CE compliant -- Combustion chamber fully lined with fireclay For rooms up to: 3,800 m³ (according to DIN standards) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 35 - 40 kg/h Fan air output, free-blowing: 9,400 m³/h Air outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 Volt Predpodlhcrofx An Ija

Kondisi: baru, Tahun pembuatan: 2026, Size: 3 Nominal heat output: 87 kW -- Compliant with BImSchV Stage 2 and CE certified -- Combustion chamber fully lined with fireclay Suitable for rooms up to: 2,200 m³ (according to DIN) Psdpfedlhbpsx An Isra Fuel types: firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 25 - 30 kg/h Fan air capacity (free-blowing): 6,000 m³/h Outlet opening: Ø 500 mm Flue pipe connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 Volt

Kondisi: sangat baik (bekas), MESIN BEKAS - V380/50 - "CE" Kode: CAL-052 _ _ _ Lebar kerja: 1100 mm Prjdpfx Anexp Ecyj Iea Grup ke-1: rol baja Grup ke-2: rol karet Grup ke-3 kombinasi: rol/bantalan Daya motor: 2 x 15 kW

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Pjdpfoxdttisx An Iera Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Spindle tiltable: Yes, 0 to 45° Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Cutter jaw adjustment: manual Height display: Digital display Tilting angle display: Digital display Fence indicator: mechanical counter Spindle diameter: 30 mm Speeds: 3,000 / 4,500 / 6,000 / 7,000 / 10,000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Psdpfeuzkxxex An Isra Machine length: 2,599 mm Machine depth: 900 mm Weight: 655 kg

Kondisi: sangat baik (bekas), Tenoning and Mortising Machine WEINIG Type 51 - Tilting sash window setup with digital angle display - Roller table with automatic feed, 6 m/min - Roller table length approx. 2,100 mm - Pneumatic workpiece clamping - Automatic counter fence exchange Crosscut Saw - Pneumatically indexed 4-position revolver Prodov Tb Hgjpfx An Isa - Motor approx. 3 kW / 380 / 400 V / 50 Hz - Saw blade diameter = 350 mm - Saw blade speed 2,800 rpm Mortising Spindle - Diameter D = 50 mm - Clamping length 320 mm - Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz - Spindle speed 3,000 rpm - Max. tool diameter 320 mm - Length stop system Machine incl. operation tools Installation dimensions L x W approx. = 2,700 x 2,800 mm Weight approx. 2,000 kg Used Machinery Notice: • Errors in technical details and prior sale excepted. • Stated prices are ex location – loaded free on truck! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)