Beli Mep Shark 310 Sx bekas (115)

Kondisi: baru, Model designation Shark 281 SXI evo Hnodpfx Asgvkgloa Neg

Kondisi: baru, MEP SHARK 382-1 SXI EVO Metal Bandsaw – Hydraulic Semi-Automatic MEP Authorized Dealer – Please send us your inquiry Motor power: 1.5 / 1.8 kW Jaw opening: 385 mm Blade dimensions: 3770 x 27 x 0.9 mm Weight: 695 kg Blade speed: 40/80 m/min Cutting capacity 0°: 300 / 250x250 / 380x250 mm Cutting capacity 45° right: 260 / 250x250 / 300x200 mm Cutting capacity 45° left: 240 / 210x210 / 280x160 mm Cutting capacity 60° right: 180 / 170x170 / 200x170 mm Cutting capacity 60° left: Description: Electro-hydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic operation, suitable for cuts from 45° right up to 60° left. Hnjdpfx Asg Hzxioa Neg Key features: - Swiveling control panel mounted on a vertical column - 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts - Dual blade speed (40/80 m/min)

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.) Hedpfx Aofg E Iaja Nong

Kondisi: baru, Model designation Hnjdpfx Aaegvkafe Nog Shark 332-1 SXI evo

Kondisi: baru, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min. Cutting capacity 0°: 250 / 220x220 / 280x220 Cutting capacity 45° right: 230 / 200x200 / 220x200 Cutting capacity 45° left: 200 / 170x170 / 200x140 Cutting capacity 60° right: 120 / 80x80 / 140x80 Cutting capacity 60° left: Description: Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO featuring semi-automatic dynamic and manual operation, equipped with an MEP-28 control for mitre cuts from 45° right up to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – saw head descends for cutting – motor stops – saw head returns – vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand switch). Features: - New centralised control panel on an articulated arm for easy access from any working position. - Low voltage control unit: Polycarbonate membrane keyboard with thermoformed raised keys and actuation confirmation signal. - Display for: * Diagnostics (messages in the user’s language) * Alarms (alarm cause descriptions) * Status of inputs and outputs * Cut counter * Cut duration * Saw blade motor amperage * Blade tension * Blade speed * Numeric display of head position. - IP55 manual 24V cycle lever. - Full program of special cutting cycles. - Ability to determine additional special cutting cycles for specific applications. - Latest generation hydraulic control unit, highly powerful and energy efficient. - Large working area with turntable on roller bearing; 265 mm with pre-loaded thrust bearing, mounted. - Two blade speeds (36/72 m/min.) via control system. - Prepared for electronic inverter installation for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow stroke is programmable directly from the control panel, adaptable to cutting material. Hnedpecgbq Iefx Aa Njg - Clamping device movable left and right, with quick-release vice. - Manual blade tension control, indicated on-screen via electronic transducer. - Machine base with pull-out coolant tray. - Electric coolant pump for blade cooling and lubrication. - Prepared for installation of minimum quantity lubrication system for the saw blade (optional), in addition to conventional emulsion oil lubrication supplied as standard. - Chip removal brush. - Machine designed for pallet truck transport. - Length stop for repeated cuts of equal length. - Material support arm with roller for attaching loading table. - Bi-metal saw blade for solid and profile materials. - Tools and operating manual in the respective user’s language. For further technical data, please refer to the attached PDF document.

Kondisi: baru, Cutting diameter: 330 mm Hnsdpfx Ajfg E Ibja Nog Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, Model designation Hnsdpfx Aogvkctoa Njg Shark 282 SXI evo

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Hnodpfx Aajfg E H Rs Neg Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter: 330 mm Cutting capacity at 90 degrees, flat: 510 x 320 mm Cutting capacity at 90 degrees, square: 320 x 320 mm Cutting capacity at 45 degrees, flat: 350 x 320 mm Cutting capacity at 45 degrees, round: 320 mm Cutting capacity at 45 degrees, square: 300 x 300 mm Cutting capacity at 60 degrees, flat: 230 x 310 mm Cutting capacity at 60 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, round: 200 mm Speed range: 15 - 100 m/min Saw blade dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Specifications: - Sturdy electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre angle adjustment via large rotating table - MEP EVO microprocessor control for managing all functions * Located front right, rotatable - Optional manual or automatic descent of the saw bow * Infinitely adjustable saw frame descent - Carbide blade guides - Hydraulic blade tensioning with digital display - 2 blade speeds - 1x bi-metal bandsaw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic vice clamping - Electro-hydraulic saw frame lowering - Electro-hydraulic saw frame lifting Hjdexaa Tzjpfx Aa Nsng - Electro-hydraulic vice opening

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Hnodpfx Aasfg E H Us Neg Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw band dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control for miter cuts from 45° right to 60° left. Key features: - New centralized control console on an articulated arm. - Low voltage operating panel: polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display showing: * Diagnostic messages (in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Used time per cut * Motor current consumption * Saw blade tension * Saw blade speed * Numeric display of head position. - IP55 switching handle for the 24V manual cycle. - Complete program of all special cutting cycles. - Detection of additional special cutting cycles for specific applications. - Newest generation, highly efficient and energy-saving hydraulic control unit. - Turntable (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min) with control. - Prepared for installation of an electronic inverter for continuously variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel, adaptable to the workpiece. - Clamping device laterally adjustable left and right, with quick-release vice. - Manually operated blade tension control with display via electronic transducer. - Base designed to fully collect coolant, even at maximum mitre angles. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced by chip conveyor – see options) integrated in the base. - Prepared for installation of a minimum lubrication set for the saw blade (optional, in addition to standard emulsified oil lubrication). - Chip removal brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cutting operations. - Material support arm with roller, for attaching the loading table. - Bi-metal saw blade suitable for solid and profile material. - Tools and operating instructions in the respective user language.

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Semi-automatic operation: - Electro-hydraulic vise clamping Hodpfxsxaa S Re Aa Neng - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter 250 mm Cutting area at 90 degrees: flat 280 x 220 mm Cutting area at 90 degrees: square 220 x 220 mm Vice width 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirements: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic band saw SHARK 282 SXI EVO Hedpfefg E H Ssx Aa Nsng with semi-automatic-dynamic/manual function, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off - Saw head lifts - Vice opens Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via manual button). Key Features: - New centralised control console on a pivoting arm for easy operation from any workstation. - Low voltage control panel: * Polyester membrane keypad with thermoformed, raised buttons and operation control signal. * Display shows: - Diagnostics (messages in the user’s language) - Alarms (with description of causes) - Status of inputs and outputs - Cut count - Time taken for each cut - Current draw of the saw motor - Saw blade tension - Saw blade speed - Numerical display of head position. - IP55 switch handle for the manual 24-V cycle. - Complete program for all special cutting cycles. - Identification of other specialised cutting cycles for special applications. - Newest generation hydraulic control unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearings. - Dual band speed (36/72 m/min) with control system. - Prepared for electronic inverter installation for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from control panel to suit the material being cut. - Clamping device laterally adjustable to the left and right, with quick-release vice. - Manual band tensioning control with on-screen display via electronic transducer. - Base with retractable coolant tray. - Electric coolant pump for saw blade cooling and lubrication. - Prepared for installation of minimal saw blade lubrication kit (optional), alongside the standard emulsion oil lubrication system. - Swarf removal brush. - Machine is suitable for pallet truck transport. - Length stop for repeat cuts. - Material support arm with roller for loading table attachment. - Bimetal saw band for solid and profile material. - Tools and operating instructions in the respective user language.

Kondisi: baru, Cutting diameter 280 mm Cutting capacity at 90°: flat 380 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 300 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 200 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Required space: approx. 1647 x 2157 mm Weight: 720 kg Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Enables mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor control unit EVO for managing all functions * Located front right, rotatable - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw blade guide with carbide inserts - Hydraulic saw blade tensioning – including digital tension indicator - Two saw blade speeds - One bi-metal saw blade - Coolant system - One angle stop - Swarf removal brush Hedpfsxaax Dox Aa Nong - Machine base with forklift pockets - Operating manual in German Semi-automatic operation process: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vise

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Speed range: 40 / 80 m/min Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivels, located at the front right - Optional manual or automatic bow descent * Infinitely variable adjustment of saw bow descent - Carbide blade guides - Hydraulic blade tensioning with digital readout - 2x bandsaw blade speeds - 1x bi-metal bandsaw blade - Coolant system - 1x angle stop Hedpfx Aaexaav Ao Neng - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation procedure: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent Hnedexaatbepfx Aa Nog - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Hnedpfx Aexaagbea Nsg Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Band speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * positioned at the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of saw bow descent - Carbide saw blade guides - Hydraulic saw blade tensioning – incl. digital value display - 2x band speeds - 1x bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: Hnodpow U U Uwofx Aa Nog - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: baik (bekas), Tahun pembuatan: 2012, Gergaji pita bekas dari MEP Tipe: Shark 452 Hydr. Sudut mitra ganda Kapasitas: 450 x 320 mm Tahun pembuatan: 2012 Hjdpfex Uq Smsx Aa Neng Termasuk ekstra mata gergaji

Kondisi: baru, sahakone-specs-fi Hedeh Dmh Hopfx Aa Nong

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) Hedpfx Aexz Hhzoa Nsng - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Model designation: Shark 282 CCS Hnedpfxsgvkbcj Aa Neg

Kondisi: baru, Model designation Hnjdpfx Aaogvkchj Neg Shark 281 CCS

Kondisi: baru, Model designation SHARK 331-1 NC 5.0 SPIDER Hodsl Sva Ispfx Aa Nong

Kondisi: baru, Model designation Shark 332-1 CCS Hedpfjgvquwjx Aa Nong

Kondisi: bekas, Tahun pembuatan: 2015, sz-20240607-1 Hnsdpfxjx Hp Dxo Aa Njg