Beli Meninju Klip bekas (255)

Kondisi: siap digunakan (bekas), Schüco tool: press tool, punching tool, item no. 293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05, and 5 pieces without number. Psdsd Sc D Sjpfx Ab Isrd

Kondisi: baik (bekas), Tahun pembuatan: 2003, Poly Clip FCA 3430 Automatische Doppelclipmaschine Die automatische Doppelclipmaschine FCA 3430 verschließt alle Faser- und Kollagendärme im Kaliberbereich von 24 bis 65 mm sowie Kunststoffdärme bis 90 mm. Diese Flexibilität wird durch einen schnellen Wechsel der Clipgröße von 12 auf 15 mm und der Spreizdistanz von 18 auf 26 bzw. 30 mm erreicht. Prsdpfow Dnfcox Ab Isd Hersteller: Poly Clip Modell: FCA 3430 Baujahr: 2003 Leistung: 200 Zyklen/min Kaliber: 24-90 mm Anschlussleistung: 400V / 2,8kW Maschinenabmessungen LxBxH: 1.455x1.200x2.015 mm Maschinengewicht: 590 kg.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.300 mm, penyesuaian silinder hidrolik: 100 mm, tinggi pemasangan: 500 mm, tinggi meja: 1.000 mm, lebar total: 2.200 mm, panjang meja: 1.400 mm, gaya penekanan: 200 t, lebar kabinet kontrol: 2.000 mm, panjang langkah: 160 mm, jarak antara tiang: 1.450 mm, lebar kerja: 1.100 mm, jarak antara dudukan samping: 400 mm, berat keseluruhan: 27.000 kg, jenis penyesuaian ketinggian: listrik, kebutuhan tinggi: 4.500 mm, persyaratan ruang panjang: 2.200 mm, lebar yang dibutuhkan: 1.800 mm, High-precision cutting and embossing press, U.T. accuracy of +/- 0.01 mm, ideal for manufacturing fuel cell stacks or hydrogen electrolyzers. The press is also suitable for (fine) blanking production, with a stroke rate of 1 - 70 cycles/min. Thanks to four connecting rod rams, off-center loads can be handled without any issues. Jamming or seizing of the press is also not possible. The press will be completely overhauled and delivered with a new Siemens S7 control system. Psdpfxet Nf Ags Ab Ierd

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 9802, Press force: 80 t Strokes per minute: 100 - 1000 spm Stroke length: 16-63 mm Table size: 970 x 920 mm Pass-through opening in table: 740 x 100 mm Ram surface: 760 x 510 mm Pedpjh Ra N Rofx Ab Iord Distance table/ram: 280 mm Compressed air: 6 - 10 bar Total connected load: 43 kW Machine weight approx.: 15.5 t Space requirement approx.: 232 x 125 x 326 cm Machine in very good condition, has not been in operation for about 6 years due to plant closure. Equipped with KYORI GX 80 feeder, 4 anti-vibration feet, separate control cabinet, additional oil cooling unit; cooling unit.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.350 mm, tinggi pemasangan: 130 mm, panjang total: 800 mm, lebar total: 950 mm, berat keseluruhan: 560 kg, daya: 0,8 kW (1,09 hp), Hydraulic punching/cutting press with swing arm, pressing force 16 t, stroke 90 mm, throat depth 560 mm, table size 800x400 mm, motor 0.8 kW, ram dimensions 460x350 mm, plastic pad thickness 50 mm, dimensions 800x900x1350 mm, weight approx. 560 kg Podpfxeu R Nx Ns Ab Iord

Kondisi: diremaj di bengkel (bekas), Heidelberg punching pair for Suprasetter Predpfjd Ay Icsx Ab Isd

Kondisi: baik (bekas), BRUDERER BSTA 30 Punch Press with 2 Decoilers and Sound Enclosure - Max. pressing force: 30 tons - Stroke rate: 100 to 600 SPM (strokes per minute) - Drive power: 0.96 to 5.5 kW - Width: 1200 mm - Depth: 1160 mm - Height: 2150 mm In good condition, fully operational. The machine can be inspected and tested under power on site. Worldwide shipping available. Inspection: To avoid misunderstandings, I would like to point out that this item can be viewed and tested under power prior to purchase. Please ask any questions you may have before purchasing to avoid confusion. For general queries or to arrange a viewing appointment, you can contact me at any time via the phone number listed below or above. Pedpfx Abjvb Nm Do Iord Subject to prior sale and errors excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 150 311, tinggi total: 6.195 mm, penyesuaian silinder hidrolik: 150 mm, tinggi pemasangan: 600 mm, tinggi meja: 1.000 mm, lebar total: 2.660 mm, panjang total: 4.340 mm, panjang meja: 3.000 mm, lebar meja: 1.250 mm, gaya penekanan: 315 t, tinggi kabinet kontrol: 2.200 mm, panjang kabinet kontrol: 3.600 mm, lebar kabinet kontrol: 600 mm, jenis arus masuk: tiga fasa, jarak antara tiang: 1.010 mm, jarak antara dudukan samping: 810 mm, jarak antara penyangga: 3.020 mm, berat keseluruhan: 76.000 kg, tahun perombakan terakhir: 2025, ATTENTION: Machine will be completely mechanically and electrically overhauled before delivery in 2025. Pressing force: 3,150 kN Adjustable stroke: 40 - 200 mm Slide adjustment: 150 mm Strokes per minute: 20 - 100 Die installation height: 600 mm Table dimensions: 3,000 x 1,250 mm Slide dimensions: 3,000 x 1,100 mm Pedpowqpghsfx Ab Isrd New control system: SIEMENS S7 1500

Tahun pembuatan: 1993, Kondisi: bekas, Press force 63 t Stroke 10–80 mm Strokes per minute 65–400 spm Ram adjustment 80 mm Table size 1030 x 550 mm Ram area 920 x 450 mm Pass-through opening in table 700 x 200 mm Installation height bottom, ram adjustment top 420 mm Machine weight approx. 10 t Double-column design Twin connecting rods Prsdpfolp U E Rex Ab Iod IMCO press force measuring system Central lubrication Automatic stroke adjustment Motorized ram adjustment Wanzke decoiler Rotary gripper feeder

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 751, Space requirement approx.: 2.6 x 1.0 x 2.2 m Pressure: 40 t Sheet width: 150 mm Stroke: 8 - 70 mm Number of strokes - stepless: 60 - 300 min⁻¹ Ram surface: 340 x 320 mm Ram adjustment: 70 mm Table size: 550 x 580 mm Max. working width: 210 mm Lateral frame passage: 250 mm Drop-through opening in table: 400 x 90 mm Clamping plate thickness: 60 mm Tool holder bore: Ø 40 x 80 mm T-slot width: 30 mm T-slot depth: 6 mm Distance between stands: 560 mm Machine weight approx.: 3.8 t Total power requirement: 7.5 kW Podpfjcxxnmox Ab Isrd with original SCHAAL roller feed SWV 1E (year 92), stepless speed adjustment, piece counter with preselection device, separate control cabinet, Unidor APS Mini control, emergency stop, selector switch for set-up, single stroke and continuous operation, adjustable stroke.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B control system - 750 mm table - Adjustable stroke from 13 to 38 mm - Complete documentation - Soundproof enclosure Prodpfowu Sy Sex Ab Iod - Machine inspected / overhauled, in very good condition! Contact us!

Kondisi: baik (bekas), Tahun pembuatan: 1976, Pressing force: 20 t Strokes per minute: max. 150 1/min, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table surface: 340 x 320 mm (W x D) Through opening: 70 x 180 mm (W x D) Ram surface: 160 x 230 mm (W x D) with wedge plate Drive power: 2 HP Design features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication Predpfx Abewufrzo Ied - Manual ram adjustment, 50 mm - Mounting bracket for feed, pivotable - 3 cams for feed or similar - Free-standing control panel - Forward and reverse operation - Manual setup via lever

Tahun pembuatan: 1981, Kondisi: bekas, Pressure 20 t Predpjlp U Nmjfx Ab Iod Stroke 8-38 mm Strokes per minute 100-1800 spm Table surface 400x400 mm Passage in the table 380x80 mm Table height 1000 mm Machine weight approx. 4 t Required space (LxWxH) approx. 1600x1600x3100 mm Machine number: 6068

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Prsdpfocxxu Njx Ab Ijd Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang langkah: 38 mm, tegangan masuk: 400 V, gaya punching: 25 t, Bruderer BSTA 25USL with BBV 190/85 - Table size: 750 mm - Adjustable stroke: 13 to 38 mm - Complete documentation - Soundproof enclosure Prjdewu Rubopfx Ab Ied - Machine tested / reconditioned, excellent condition! Contact us!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod Pedpfxjgpxc So Ab Ierd - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Tahun pembuatan: 1995, Kondisi: bekas, Pressure: 125 t Stroke: 10–80 mm Stroke rate: 240 strokes/min Slide adjustment: 80 mm Table area: 850 x 600 mm Ram area: 760 x 550 mm Passage opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Ram bore diameter: 50 mm Total power requirement: kW Machine weight approx.: 13 t Required space approx. (WxDxH): 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Prjdpfx Abjlp U Nqj Isd Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Psdpfx Aocxxycjb Ierd High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 19.269 h, Fungsionalitas: berfungsi sepenuhnya, BSTA 41 with BBV 2x 202/120+ AS120 Completely overhauled by Bruderer Switzerland in 2007 CE certification possible Contact us! Pedpfx Abouwlvds Ijrd

Kondisi: baik (bekas), Tahun pembuatan: 1986, jam operasional: 10.000 h, Press force: 30 tons (approx. 270 kN) Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 1/min Stroke (fixed): 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Features: * Hydraulic clutch * Roller feed Brand: Sankyo Podpfjnl Snex Ab Ierd Type: Variax V70 Strip width: max. 100 mm Only approx. 10,000 operating hours

Tahun pembuatan: 1981, Kondisi: bekas, Press force: 63 t Stroke: 6–60 mm Pjdpelp U R Isfx Ab Ierd Strokes per minute: 90–550 spm Shut height (bottom), ram adjustment (top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Pin hole in ram: Ø 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement approx. (WxDxH): 2900 x 2000 x 3000 mm Centralized oil lubrication IMCO press force measuring device

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Predpecxxrdefx Ab Isd Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Entry width: 120 mm Feed length: 15-80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total connected load: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 1967, Pressure: 30 t Stroke rate: 100 - 600 strokes/min Adjustable stroke range: 8 - 40 mm Ram adjustment: 40 mm Feed width: 198 mm Tool installation height - min./max.: 230 - 270 mm Roller width: 110 mm Pass-through opening in table: 310 x 80 mm Column distance (left-right): 330 mm Column distance (front-rear): 280 mm Table height above floor: 990 mm Column diameter: 50 mm Voltage: 380 V Frequency: 50/60 Hz Control voltage: 24 V Table size: 475 x 450 mm Ram diameter: 190 mm Total power requirement: 0.96 - 5.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 1.2 x 1.16 x 2.15 m Precision high-speed punching press in 3-column design, with: - Optionally available with original Bruderer precision double roller feed, pull and push operation on right and left side (see photo), - Electro-hydraulic VARI drive, Podocxxxmepfx Ab Isrd - Pneumatic clutch with safety valve, - Three operating modes: single stroke, single cycle, and continuous operation, - Central lubrication, - Cooling fan for consistent machine temperature, - Pressure gauge for air pressure monitoring, - Stroke counter integrated in the control panel, - Separate, lockable control cabinet, - Two-hand operation, and - Emergency stop safety feature. Newly painted, visually in good condition!

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: 1830977, Pressure: 32 t Stroke rate: 30 - 1100 strokes/min Sheet width: 0 - 120 mm Table size: 760 x 580 mm Feeder: SANKYO V76 Psdpfx Abecxxrls Ijrd Adjustable stroke: 3 - 50 mm Column distance (left-right): 800 mm Column distance (front-back): 200 mm Shut height: 235 mm Feed length: 0 - 76.2 mm Pass-through opening in table: 670 x 110 mm Ram adjustment: 50 mm Ram clamping surface: 710 x 410 mm Sheet thickness: 0 - 3 mm Strip speed: max. 70 m/min Control: OP 15 SIEMENS PLC Feed angle: 165° Total power requirement: 18 kW Machine weight approx.: 6.5 t Space requirement approx.: 2.6 x 1.7 x 2.6 m High-precision high-speed stamping press in 4-column design, precision cam feeder Sankyo V 76, feed direction from right to left, equipped with Siemens CNC control OP 15, soundproof enclosure, Herion press safety valve, central lubrication, emergency stop.

Kondisi: bekas, Tahun pembuatan: 1988, nomor mesin/kendaraan: 724306, Pressure: 63 t Strokes: 400 strokes/min Sheet width: 180 mm Stroke: 10 - 80 mm Feed length: 150 mm Strip width: 180 mm Predecxxt Topfx Ab Iod Control system: KAISER Voltage: 380 V Space requirements approx.: 1.85 x 2.70 x 3.00 m + original Kaiser gripper feed Model ZR 18 D