Beli Mesin Cnc Milling Dengan Alat Changer bekas (89.247)

Kondisi: belum diuji (bekas), Chuck muka: 2500 mm Diameter pembubutan: 3200 mm Maks. tinggi pembubutan di bawah alat: 2500 mm Maks. tinggi benda kerja di bawah penyangga: 2780 mm Maks. berat benda kerja: 25 ton Balok lintang: 2000 mm Isdszdk A Uepfx Apaotk Pergerakan vertikal ram: 1600 mm Pergerakan horisontal ram: 1800 mm Penampang ram: 250 x 300 mm Jarak terkecil antara dua ram: 1150 mm Daya penggerak chuck muka: 71 kW Kecepatan putar chuck muka: 125 rpm Motor penggerak frais: 18 kW Kecepatan spindle frais: 1600 rpm Torsi penggerak frais: 710 Nm

Kondisi: bekas, As-new CNC vertical machining center, milling machine VMC, machining center, HSC milling, machining center TAIKAN B540Z Serial no. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Axis travels for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel (for tool change position): X: 540 mm Table size: 520 x 400 mm Spindle taper: ISO 25 Distance spindle nose - table: 165 - 395 mm Spindle speed: max. 36,000 rpm, stepless Feed rate: 0 to 10,000 mm/min Rapid traverse: 15 m/min Table load capacity: 200 kg Maximum tool length: 120 mm Maximum tool diameter: 80 mm Maximum tool weight: 0.8 kg Tool change time: approx. 10 sec Axis drive power: each 0.8 kW Spindle drive power: 3.5 kW at 100% duty cycle Power supply: 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB, and CF-Card - Measuring system for tool measurement: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and recooling unit (adjacent) - Tool changer with 13 magazine positions - Electronic handwheel Isdpfjw Ed U Nex Apajtk - Coolant system - Safety enclosure with sliding door - Central lubrication - Includes 10 ISO 25 tool holders with ER20 collet chucks and a set of collets Transport space requirement L x W x H: 1800 x 1500 x 2300 mm Weight: 2900 kg Very good condition – as new Machine comes from a showroom and has only low operating hours.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, de-hu-001 Iedpfx Aozb I Tgopajtk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min Itjdpsn D N H Tsfx Apaok • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.

Kondisi: bekas, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 rpm Isdpfsc Tt Hrox Apajtk Accessories: Angle table, coolant system, various tool holders

Kondisi: baik (bekas), Tahun pembuatan: 2001, CNC bed-type milling machine, manufacturer: IBERIMEX-MVR Model: UH-1250, Year of manufacture: 2001 Control system: Heidenhain TNC124 Isdpfxod Erane Apaotk Travel ranges: X-axis 1250 mm, Y-axis 500 mm, Z-axis 460 mm Clamping table: 360 mm x 1800 mm Spindle taper: ISO50 Machine equipped with full enclosure. For further technical details, please refer to the machine data sheet. The machine is in good condition.

Kondisi: baik (bekas), Tahun pembuatan: 1990, CNC milling machine manufacturer TOS, model FGS40CNC. Control: Heidenhain TNC 355, year of manufacture: 1990. Itsdpjdtfhqefx Apask Travel paths: X 1000 mm / Y 500 mm / Z 500 mm Spindle taper: ISO 50.

Kondisi: bekas, CNC Drehmaschine GILDEMEISTER Typ GD 160 mit Steuerung Gildemeister - Fanuc Mate TS - Kraftspannfutter BERG Ø 200 mm - Werkzeugrevolver 12-fach VDI 40 - 6 Stück Werkzeugaufnahmen VDI 40, eingebaut Stellfläche Maschine mit Späneförderer L x B x H 4200 x 2200 x 2100 mm Gewicht ca. 4 ton. Wir machen Platz Preiswerte Maschine - Ideal für Export Isdpfx Apoy T R Iroajtk

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screw drives for X/Y/Z axes - Automatic 2-speed gearbox for spindle speeds - 1 pc. long milling arbor 27 mm - 3 pcs. reducing sleeves (MK1, MK2, MK3) - Pneumatic-hydraulic clamping system for the vertical spindle - Spindle guard with safety switch - Safety enclosure in the work area with electrically interlocked doors - Counter-support for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and leveling screws - Operating tools - Technical documentation - CE compliant - Colors: * RAL 7024 - Graphite grey * RAL 7035 - Light grey Technical Data: Fixed angle table: - Working surface dimensions: 1,000 x 500 mm - T-slots: Number / Size x Pitch: 8 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Working surface dimensions: 1,200 x 250 mm - T-slots: Number / Size x Pitch: 3 pcs. / 14 x 63 mm Travel: - Axis travel: automatic/manual Itodpfx Aevupa Rspajk - Longitudinal (X): 600 mm - Cross (Y): 500 mm - Vertical (Z): 400 mm Feeds: - Control: stepless - Range (X, Y, Z): 0 – 2,000 mm/min - Rapid traverse - X, Y, Z axes: 5,000 mm/min - Rapid traverse - Z axis: 4,000 mm/min Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 steps): 0 – 3,200 rpm Vertical milling head: - Tool holder: DIN 69871 / ISO 40 - Speed range (2 steps automatic): 0 – 3,200 rpm - Head swivel: ±90° - Distance spindle nose to angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed drive power X-Y-Z: 2.85 kW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Ijdpotrhq Hsfx Apaetk Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Good condition

Kondisi: bekas, cnc-vertikal-bmc25m-en Itodew Nklhspfx Apask

Kondisi: bekas, Mesin frais alat bekas untuk pengerjaan logam merek Deckel model FP3a. Perangkat dalam kondisi bekas, namun tetap berfungsi dan siap digunakan. Memiliki konstruksi yang kokoh dan berbagai fitur untuk memastikan pengerjaan logam yang presisi. Harga netto 23% PPN Motor spindle: 2/4 kW Kecepatan spindle: 25–2500 Itjdpfx Aexluu Rspaek Spindle SK 40 Jangkauan pinol: 100 mm Motor gerak: 1,5 kW Kecepatan gerak: 5–500 mm/menit Koreksi gerak: 0–120 % Gerak cepat: 1500 mm/menit Gerakan mekanis/manual: X490/500 mm Y290/300 mm Z390/400 mm Kepala dapat digeser 200 mm Berat mesin: 1750 kg Maksimal

Kondisi: baik (bekas), Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Thanks to its sturdy construction, this machine is ideal for workshops, prototyping, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 path control system. Thanks to straightforward dialog guidance, it is extremely easy to program directly at the machine, supports graphical simulations, and allows simple uploading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Specifications Overview CNC Control Model: HEIDENHAIN TNC 155 Operating modes: Manual (like digital readout), positioning with manual input, single block, sequence, program test (graphical simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Travel – X-axis (table longitudinal, automatic): 630 mm Travel – Y-axis (spindle slide crosswise, automatic): 500 mm Travel – Z-axis (table vertical, automatic): 460 mm (see p. 1) Feed rate: steplessly adjustable from 1 – 3000 mm/min on all 3 axes Rapid traverse rate: X and Y axes: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Itedpfezcqf Isx Apaok Spindle Drive Working spindle speeds: 21 geared steps Speed range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with draw key (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table Geometry & Workpiece Capacity Angle table clamping area: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping area: 397 x 550 mm (with 4 x 4 threaded M16 holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrical & Cooling Electrical power supply: 13.5 kW Coolant tank capacity: approx. 100 liters Dimensions & Weights Machine dimensions: 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. working space required (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3,100 kg (incl. vertical milling head and angle table) "Everything from a single source: we are happy to offer tailored bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Kondisi: baik (bekas), Tahun pembuatan: 1998, Mikron UM 710/900 Mesin Frais Universal Mesin frais universal presisi tinggi dari produsen berkualitas asal Swiss, MIKRON, model UM 710/900. Mesin ini berasal dari penggunaan yang terawat dan dikenal karena presisi khas Mikron serta area kerja yang luas (hingga 900 mm langkah sumbu X). Mesin ini sangat ideal untuk pembuatan alat, pembuatan prototipe, pelatihan, atau bengkel perbaikan yang menuntut. Data teknis (informasi pabrikan): Area Kerja & Sumbu: Langkah longitudinal (sumbu X): 710 / 900 mm Langkah melintang (sumbu Y): 630 mm Langkah vertikal (sumbu Z): 500 mm Spindel Kerja: Taper alat: SK 40 / DIN 69871 Tingkat transmisi: 4 Rentang kecepatan putar: dapat diatur (vertikal & horizontal) Penggerak Utama & Feed: Daya penggerak spindel: 11 kW (pada 44% duty cycle) / 7,5 kW (pada 100% duty cycle) Kecepatan feed (X, Y): 0 – 10.000 mm/menit (dapat diprogram) Kecepatan feed (Z): 0 – 8.000 mm/menit (dapat diprogram) Kecepatan rapid traverse (X, Y / Z): 10 m/menit / 8 m/menit Meja Kerja (Meja Sudut): Area penjepitan: 600 x 1.200 mm Rel T-slot: 9 buah (14-H7, jarak 63 mm) Beban maksimum meja: 500 kg Listrik, Dimensi & Berat: Daya terpasang: Total kapasitas terpasang 21,5 kW Tegangan operasi: 3 x 400 V - 50 Hz Sistem pendingin: Kapasitas 150 liter Berat mesin: sekitar 4.300 kg (termasuk pelindung) "Semua dari satu sumber: Kami dengan senang hati menawarkan pembiayaan bank yang sesuai untuk proyek Anda." komplett-konzept.leasingo.de Temukan artikel lainnya - baru dan bekas - di toko kami! Isdpszcqcgofx Apajtk Biaya pengiriman internasional atas permintaan!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.500 mm, Head mounting station TUPC CNC micro-indexing head A-axis: 360,000 x 0.001 mm C-axis: 360,000 x 0.001 mm SELS spindle extension L=500 mm CTS internal coolant supply ATC chain tool changer, 60 positions Hydrostatic guides Optional T-slot plates 5600 x 1875 mm (2x) + 4000 x 1875 mm X-axis travel: 16,000 mm Y-axis travel: 3,500 mm Z-axis travel: 1,500 mm Spindle power: 80 kW Spindle speed: 4,000 rpm Ijdpfx Apexpfkkeaotk Tool holder: SK59 ISO/BT/MK Feed rate X-axis: 25,000 mm/min Feed rate Y-axis: 25,000 mm/min Feed rate Z-axis: 25,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 24,000 mm Width: 6,500 mm Height: 6,500 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract terms. We recommend verifying all critical details.

Kondisi: belum diuji (bekas), Please upload the photo containing the technical details, and I will translate the information as requested. Isdpfx Ajhvzxzopajtk

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Tool change time approx. 6 sec. Itodpfxey N Du Do Apask Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1990, HEIDENHAIN TNC-355 Travel paths: 850 x 500 x 450 mm Table size: 1250 x 500 mm Spindle taper: ISO50 Spindle speeds: 35.5 – 1800 rpm Various accessories Itjdpfx Ajfg Ep Depaek MARCELS MASCHINEN CH

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), Schneeberger DMR Gemini CNC Tool Grinding Machine TECHNICAL DATA Control: GE Fanuc 160, 5-axis simultaneous Software: Schneeberger Quinto Measuring System X, Y, and Z axes: 0.1 μm A axis: 0.0001° C axis: 0.0001° Grinding Head Power: 15 kW Speed: 50 – 10,000 rpm Spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. number of grinding wheels: 6 Linear Axes X axis, travel: 380 mm Feed rate: 20,000 mm/min Resolution: 0.0001 mm Transmission ratio: 1 : 1 Power: 1.0 kW / 3 Nm Y axis, travel: 300 mm Feed rate: 5,000 mm/min Resolution: 0.0001 mm Transmission ratio: 24 : 4 Power: 1.6 kW / 8 Nm Z axis, travel: 280 mm Feed rate: 20,000 mm/min Resolution: 0.0001 mm Transmission ratio: 1 : 1 Power: 1.0 kW / 3 Nm Rotary Axes C axis: 210° Speed: 72° / s Resolution: 0.0001° Power: 1.6 kW / 8 Nm C' axis: ±180° Speed: 90° / s Resolution: 0.0001° Retraction: Hydraulic A axis: ±360° Speed: 225° / s Resolution: 0.0001° Power: 1.0 kW Nose: ISO 50 Isdpfjmqni Asx Apastk Center height: 210 mm Dimensions and Weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8,000 kg We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Kondisi: hampir baru (bekas), Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 220 mm Verfahrweg Z-Achse: 400 mm Aufspannfläche: 620 x 390 mm Itjdpfx Apjh Ty Hkjask Drehzahlbereich: 31 - 3150 U/min Vorschubbereich: 1 - 3600 mm/min Eilgang: 4000 mm/min

Tahun pembuatan: 1993, jam operasional: 13.924 h, Kondisi: sangat baik (bekas), X-400, Y-330, Z-350, rotary table 630x335 mm, SK 40, 40–6,000 rpm, probe, Heidenhain TNC 425 control Itodpfx Aefgz Rkopaok

Tahun pembuatan: 1988, Kondisi: bekas, Table clamping surface: 650 x 1600 mm Travel X-axis: 1250 mm Travel Y-axis: 800 mm Travel Z-axis: 620 mm Spindle taper: ISO 50 Spindle speeds: 5 - 2000 rpm Feed rates, steplessly adjustable: 5 - 3000 mm/min Rapid traverse: 10 m/min Space requirement: 3850 x 3000 x 3200 mm Weight: 11100 kg FIDIA control ADDENDUM V 05-E CNC 12 Itjdpfx Apjxnq Ijask Only 8,577 operating hours!

Tahun pembuatan: 1989, Kondisi: bekas, nomor mesin/kendaraan: 2204-1736, Table clamping surface: 460 x 800 mm Travel X: 485 mm Travel Y: 385 mm Travel Z: 380 mm Quill stroke: manual approx. 70 mm Spindle speeds: 50 - 3150 rpm Feed rate, steplessly adjustable: 2 - 1000 mm/min Rapid traverse: 2 m/min Itedjclli Uopfx Apaek Electrical connection: 3.7/4.4 kW Space requirement: 2100 x 1650 x 1730 mm Weight: 1850 kg

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 2810-3076, Table clamping surface: Travel X-axis: 560 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Quill stroke: 80 mm Iodpfx Apjfnry Hoaetk Spindle taper: SK 40 Spindle speeds: 40 - 4000 rpm Feed rates, steplessly adjustable: 2 - 2000 mm/min Rapid traverse: 4 m/min Space requirement: 2000 x 2150 x 2030 mm Weight: 2720 kg

Tahun pembuatan: 1990, Kondisi: bekas, nomor mesin/kendaraan: 90030003, Table size: 500 x 1200 mm Itsdpfxo Npwfj Apaok X-axis travel: 1000 mm Y-axis travel: 550 mm Z-axis travel: 600 mm Spindle taper: ISO 40 Spindle speeds: 60 - 2700 rpm Spindle drive: 10 kW Electrical connection: 380 V, 20 kVA Required space: 3200 x 2800 x 2650 mm Weight: 7.3 t