Beli Mesin Press Briket bekas (96.699)

Kondisi: baru, Tahun pembuatan: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary compression force: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg Fodpfx Aogv I N Ujdqogh 10. Screw-driven feed systems automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Pumps and valves of the hydraulic system are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are from SCHNEIDER or SIEMENS brands. 16. The machine is CE-certified. This marking certifies that the product complies with European directives regarding consumer safety, health, or the environment. 17. The machine is covered by a one (1) year or three thousand (3,000) operating hours warranty against manufacturing defects under AYMAS Makina San. Ve Tic. Ltd. Şti.

Kondisi: bekas, 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Fgjdpfx Ajwqhwljdqeh Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: - Output: 50 kg/h (depending on material) - Throughput: 0.45 m³/h - Briquette shape: octagonal, 125 x 70 mm - Motor power: 5.5 kW - Compaction ratio: 1:10 - Moisture content: min. 8%, max. 20% Sale on behalf of a customer, ex location near 69124 Heidelberg, without dismantling, transport, or installation. Dismantling, loading, and transport by us available as an option. Subject to errors in description and price. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Interim sale reserved. For used machines, any warranty is excluded; the following applies: “purchased as inspected.” Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Prices plus statutory VAT; payment prior to collection or dispatch. Delivery terms: ex location.

Kondisi: baru, Wood Briquetting Press Amis ABP 60 L -Exhibition Machine- ----- Technical Data ----- Briquette Ø: 60 mm Hydraulic Unit: 3 kW, 140 bar Voltage: 400 V Frequency: 50 Hz Circuit Protection: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely simple operation - Hydraulic control system - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large feed hopper - Hardened briquette tongs - Replaceable pressing rod - Pressing without the need for additives - Thanks to the pre-compressor, even Fgsdpfx Aeu R Sxxsdqeh voluminous shavings can be processed - No adjustments or monitoring of pressure required - new exhibition machine -

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, I am selling a heavy-duty briquetting press RUF RB440. Year of manufacture: 11/2002 / Completely overhauled with warranty until 2025 Motor power: 30 kW Output: Approx. 400 wood briquettes per hour Briquette size: RUF 150 x 60 x 40–110 mm (depending on material) Material moisture content: up to 15% Nominal pressing force: 14,200 N/cm² Oil cooler included Fodpswun I Eofx Adqogh Dimensions: 3000 x 1800 x 2000 mm Total weight: 3,000 kg Features: Feed inlet on the right side. Condition: Fully reconditioned / 500 operating hours warranty, like new. Available immediately. Supplied with full documentation and CE certification.

Kondisi: baru, Tahun pembuatan: 2024, en_001 Fgodpod Nm Siofx Adqoh

Kondisi: siap digunakan (bekas), Technische Merkmale Leistungsaufnahme des Hydraulikaggregats: 5,5 kW Produktionsleistung, abhängig vom Material, z. B. bei einem Schüttgewicht von ca. 250 kg/m³: 30 bis 50 kg/h Brikettierdurchmesser: 50 mm 100-Liter-Öltank in Kesselbauweise integriert Hauptzylinder, Vorschubzylinder, Greiferzylinder Halteklammer Elektroschaltschrank mit SPS-Steuerung Temperatur- und Ölstandskontrollsystem Gehärteter Stahlverdichtungszylinder Automatische Briketlängenverstellung Anschluss für Brikettauswurfrohr Installierte Optionen: Fsdpfx Adjtpryysqegh Bodenplatte, Schneckenentnahme, Siloleergerät, Trichter 1040 x 1040 mm Füllstandsensor mit Schaufel Ölvorheizung Elektrik und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 5,5 kW Motor: 7,5 PS Abmessungen insgesamt

Kondisi: baru, Tahun pembuatan: 2025, Also available in various models! 1. Briquette diameter: Ø 120 mm 2. Capacity: 1,800 – 2,200 kg/hour (iron and steel) 3. Preliminary press force: 15 tonnes 4. Main compression cylinder force: 400 tonnes 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 – 14 seconds 7. Electric motor power: 75 kW 8. Machine dimensions (width x length x height): 3,200 mm x 4,200 mm x 3,500 mm 9. Machine weight: 13,000 kg 10. Auger-driven feed units automatically fill the compression chamber, and the integrated vibrating hopper provides additional safety by preventing oversized material from entering the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is installed. 13. Hydraulic system pumps and valves are of the PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. Fgedsdfc Ikopfx Adqoh 15. All electrical and electronic components are from SCHNEIDER or SIEMENS. 16. The machine is CE-certified. The marking certifies that the product complies with European guidelines regarding consumer safety, health, and environmental protection. 17. The machine is covered by AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or two thousand five hundred (2,500) operating hours.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1800x1800x1900 mm Weight: 3000 kg Total power requirement: 33.5 kW Fgjdpovz Ex Njfx Adqeh Hydraulic briquetting press BP-500 - Capacity up to 450 kg/h - Motor: 33 kW / 400 V, 50 Hz - Chip compression: min. 1000 kg/cm² - max. 1700 kg/cm² - Maximum wood moisture: 14% - SIEMENS control system - Dimensions (LxWxH): 1800x1800x1900 mm - Weight: 3000 kg Briquette dimensions: - Length: 150 mm - Width: 60 mm - Height: 40–105 mm Included: - Packaging station consisting of briquette feed conveyor - Packaging table with tilting tray - Film sealing machine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, berat keseluruhan: 500 kg, daya: 3 kW (4,08 hp), PLC control with touch panel Briquetting capacity 80 - 100 kg/h Conveyor screw diameter 130 mm Connection (internal) diameter 160 mm Chip briquette diameter 60 mm Fodpfswhv Imox Adqsgh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, I am selling a heavy-duty briquetting press RUF RB600. Year of manufacture: 10/2014 Motor power: 40 kW Fodevld A Ijpfx Adqegh Productivity: approx. 600 wood briquettes per hour Wood briquette dimensions (RUF): 150 x 60 x 40–110 mm (depending on material) Material moisture: up to 15% Nominal pressing force: 14,200 N/cm² Oil cooler included Dimensions: 3,800 x 1,800 x 2,000 mm Total weight: 4,000 kg Equipment: discharge on the right side – right-hand power connection. Condition: fully refurbished – 500 operating hours warranty, like new. Available immediately. Complete documentation and CE certification included.

Kondisi: baru, Tahun pembuatan: 2025, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Fodpfxochqxxe Adqogh Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1850 x 1500 x 1230 mm Weight: 870 kg Total power requirement: 8 kW Fjdpfxovz Eqlo Adqegh Briquette Press BP-120 PRO - Briquette diameter: 70 mm - Hydraulic motor: 7.5 kW - Throughput: 50–120 kg/h - Air-oil cooling system - 7 cycles/min - Maximum briquette length: 50 mm - Dual pressure gauge - Oil level sensor in the tank and temperature sensor - Control cabinet with SIEMENS PLC touch screen control - Operating hours counter - Screw channel, screw discharge - Material hopper: 1900 mm x 1600 mm - Voltage: 400 V / 50 Hz - Dimensions: L=1850 mm, W=1500 mm, H=1230 mm - Weight: 870 kg

Kondisi: baru, Tahun pembuatan: 2025, Briquetting press with PLC control and automatic briquette length regulation Throughput: up to a maximum of 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material ideally less than 25 mm chip length Moisture content 6-12% ATRO Machine is suitable for intermittent operation. For example: up to 2 hours of briquetting; 1 hour break, etc. Fgjdpfx Adjv Rpxljqoh If the machine is to be operated continuously for longer than 2 hours at a time, an optional cooling system must be installed.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1700 x 1170 x 1510 mm Weight: 650 kg Total Power Requirement: 6 kW Briquetting Press BP-60 - Briquette diameter: 60 mm - Hydraulic motor: 5.5 kW - Throughput: 15 to 70 kg/h Fodpfxevz Eqfo Adqjgh - Cylindrical material hopper Ø 1000 mm - 7 cycles/minute - Maximum briquette length: 60 mm - Pressure gauge - Oil level sensor in tank and temperature sensor - Control panel with SIEMENS PLC and touchscreen - Operating hour counter - Voltage: 400 V / 50 Hz - Level sensor for automatic shut-off - Chrome-plated pliers - Dimensions: L=1700 mm, W=1170 mm, H=1510 mm - Weight: 650 kg

Kondisi: baru, Tahun pembuatan: 2025, * Optional features available at extra cost, see below * Production time approximately +/- 5 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust construction, ensuring consistent briquette quality in continuous operation. The pressing process is carried out purely by hydraulic pressure, without the addition of any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a volume of approx. 0.5 m³. Silos with larger volumes or special containers designed for installation beneath existing extraction and filtration systems, acting as a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, using a dust extraction system or a tipping container. For systems requiring fully automatic operation, the use of a lifting/tipping device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette varies depending on the model, from 40 to 80 mm, while the diameter is either 50, 65, or 70 mm, depending on the type. An optional drip tray can be fitted for emulsion recovery, allowing coolant, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to a length of approx. 20 mm are filled into the storage container of the briquetting press. An agitator is installed at the bottom of the container to prevent bridging and to feed the material into the pre-compactor chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder presses the material against a vertical slide until the set pressure is reached. The vertical cylinder then moves upward, and the stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Advantages of briquette production include: • Volume reduction by up to 90% • Emulsion recovery • Cost savings in storage and transport Fodpjgfm Ryjfx Adqjgh • Cost-effective disposal • Profitable sale NEM 900 Briquetting Press: for briquetting aluminum chips Throughput: up to max. 320 kg/h (material-dependent; chip length less than 14 mm) *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical Data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2000x1600x1500 mm Weight: 1550 kg Total power requirement: 11.5 kW Briquetting Press BP-200 PRO - Briquette diameter: 80 mm - Hydraulic motor: 11.0 kW - Throughput: 90/250 kg/h - 7 cycles/min at full capacity - Automatic material detection probe - Maximum briquette length: 70 mm per cycle - Dual pressure gauge - Oil level sensor and temperature sensor in the tank - Control cabinet with SIEMENS PLC touch screen control Fgedevz Efvopfx Adqjh - Operating hours counter - Screw channel mixer for material feeding - Material hopper dimensions (L x W x H): 1880 x 1880 x 1030 mm - Voltage: 400 V/50 Hz - Dimensions: L=2000, W=1600, H=1500 mm - Weight: 1550 kg

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 8 h, en-1 Fgsdexfwdepfx Adqsh

Kondisi: baik (bekas), Good, used condition Main motor: 11 kW Fsdpfxst Hxuds Adqjgh Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 27 h, A briquetting press machine R2, currently available for immediate delivery. *Subject to prior sale *Round silo available at additional cost The press is only deliverable in combination with a system component such as a shredding plant, semi-automatic briquette packaging unit, cutting mill, hammer mill, transport auger, conveyor belt with overband magnet, or extraction system. Industrial hydraulic briquetting press for rectangular briquettes with extraction system. Ex-demo machine available at a special price. Optional mounting silo with discharge: + €19,995 net The ideal machine for professional, industrial briquette producers. Type R – throughput up to 500 kg/h (*depending on material) Options at additional cost: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction units, optionally with rotary valve - Transport augers - Silos - Custom control system interconnections - Semi-automatic packaging systems Press: - Hydraulic oil heater (recommended for outdoor installations) Fgodpfx Adogbpm Toqsh - Control cabinet heater (recommended for outdoor installations) - Your initials/logo on the stamp - Color of your choice - Packing table with drawer - Inspection door in the hopper - Additional silo with discharge Your advantages: Key point: + Well-established, proven matrix press thanks to 25 years of experience. The challenge and know-how lie in the details, e.g., highest quality valves and hydraulic cylinder seals used. + Optimized, advanced briquette length control. Excellent system for regulating consistent briquette length. + 24h operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics *Depending on the bulk density of your raw material *Based on a bulk density of 200 kg per cubic meter Precise information after successful test with your material Drive motor: 22 kW – IE3 400 V / 50 Hz / 3-phase Oil cooler: 2.2 kW Agitator: 0.55 kW Screw conveyor: 1.5 kW Hopper: 400x800 mm Capacity approx. 150 liters Soft start for hydraulic motor Siemens PLC S7-1200 Auto start and stop via a light barrier integrated into the feed hopper Up to 560 briquettes per hour Specific pressing pressure: 1,700 kg/cm² Up to 300 bar operating pressure Briquette size: 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg 600 liter hydraulic oil reservoir Control system designed for operation from +8°C to +35°C Feed material requirements: - Moisture content (air-dry) must be between at least 6% and a maximum of 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: heated room with minimum +8°C Otherwise, we recommend a heater (available at additional cost) - Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the press tools and/or increased wear may occur otherwise.

Kondisi: baru, Tahun pembuatan: 2025, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force Fgedoffh Atepfx Adqeh - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Fgodpfx Aed Su Hxsdqsh Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baik (bekas), refurbished_used_machine basic_machine_starts_at_a_price_of_147700_euros_net *Options_available_at_extra_cost_see_below with_full_1_year_warranty ready_for_delivery_approx_16_weeks_after_order Technical_data: Throughput_capacity_up_to_a_maximum_of_1200_kg/h_(depending_on_m aterial) (e.g._sawdust_with_a_bulk_density_of_180_kg/cbm) Briquette_diameter:_75_mm including_2_m_press_channel Main_motor_power:_45_kw Feed_screw_gear_motor:_2_x_2.2_kw Compressor_screw:_2_x_5.5_kw Distributor_screw:_2.2_kw Hydraulic_pump_motor:_0.37_kw Total_connected_load:_65_kw Control_panel_with_plain_text_display_for_operating_states and_load_display_for_main_drive_and_feed_screws PLC_control_Siemens_S7/300_with_operating_hours_counter_in_contr ol_cabinet Machine_has_CE_mark Automatic_start/stop_function_for_the_machine Dimensions:_3100x860x1800_mm_(LxWxH) Weight:_4500_kg Options: Silo_for_MAP_series_(suitable_only_for_one_press_of_type_MAP_120 0) -Storage_silo_above_the_machine- Capacity:_approx_6_cbm,_solid_steel_construction_with_agitator_d ischarge_and_level_sensor. 19,700_euros_net_plus_VAT -Temperature_control_unit_for_press_tools for_maintaining_temperature_for_optimal_briquette_quality. Temperature_controller_for_pump,_cooling_unit,_fan,_pressure_swi tch Wired_ready_to_connect_-_mandatory_for_operation including_matching_control_unit Fjdpfo E Dquex Adqogh 7,850_euros_net -Guillotine_for_cutting_briquettes_to_length Compressed_air_connection_on_site_required 6,940_euros_net_plus_VAT -Conveying_line_/_cooling_section_(nominal_value:_4x2m) Per_2_meters:_990_euros_net Installation_/_commissioning_(nominal_value_per_press:~2-3_days_ on_site) Based_on_actual_hours,_separately_billed._The_following_rates_ap ply: Service_technician/mechatronics_per_installation_and_travel_hour :_129.00_euros Overtime:_25%_surcharge Saturday_and_night_hours:_50%_surcharge Sunday_and_public_holiday_hours:_100%_surcharge Daily_allowance_per_fitter:_depending_on_country Per_car/van_kilometer:_0.98_euros/km Travel_and_accommodation_on_receipts_or_flat-rate_to_be_borne_by _the_customer. Test_with_customer's_own_material:_(by_arrangement,_up_to_max_75 0_kg)_-_1,970_euros_net_fixed ---- Raw_material_requirements: - Moisture_content_(atro):_minimum_6%_to_maximum_18% - Maximum_chip_length:_20_mm - Installation_temperature:_heated_room_at_least_+5°C - Feed_must_be_free_of_metals_and_mineral_contaminants._Damage_to_ press_tools_and/or_increased_wear_may_result.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: Fgedpfxefhql Tj Adqjh - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: baik (bekas), Briquetting press for aluminium chips / grinding sludge Fgsdpfx Adet Ia Tkjqjh Motor: 4 kW Briquette diameter: 60 mm High pressing force: 2,500 kg/cm² Without emulsion pump Throughput up to max. 60 kg/h * Details after testing Used machine, Functionality guaranteed upon handover

Kondisi: baik (bekas), Tahun pembuatan: 2001, Good, used condition Few operating hours (1,675 h) Motor: 11 kW Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Press dimensions: Fodpfx Adewcc D Reqsgh approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: approx. 500x1250x2120 mm (LxWxH) Weight: approx. 3,000 kg